fsck
oder mal bonnie++ große Sätze schreiben lassen, gibt auch interessante Fehler
Liest sich gut... werde es testen.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
Ist ja bei Fedora 6 mit dabei. (Evtl. Zeilenumbruch)
Was bedeutet Pre-fail ?
[root@pc1000 /]# /usr/sbin/smartctl -a /dev/hda
smartctl version 5.36 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar family
Device Model: WDC WD200BB-75AUA1
Serial Number: WD-WMA6Y4965465
Firmware Version: 18.20D18
User Capacity: 20.020.396.032 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jan 16 17:52:05 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 24) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: (1020) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 16) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 108 102 021 Pre-fail Always - 2008
4 Start_Stop_Count 0x0032 097 097 040 Old_age Always - 3245
5 Reallocated_Sector_Ct 0x0032 200 200 112 Old_age Always - 0
7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5536
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2777
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error
# 1 Extended offline Aborted by host 80% 0 -
# 2 Extended offline Interrupted (host reset) 80% 0 -
Device does not support Selective Self Tests/Logging
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
Die Antwort ist verrutscht. Sorry.