P
pix
Jungspund
Hallo,
ich versuche seit Wochen mit google hinter diese Meldung zu kommen:
Seit Ewigkeiten benutze ich für die Einwahl ins Internet 'wvdial'.
Hatte bisher mehr oder wenige kaum Probleme damit.
Ich finde es gut, weil man dafür keine spezielle Oberfläche wie KDE oder Gnome braucht.
Trotz intensiver Suche mit google & Co bin ich keinen Schritt weiter.
Selbst mit meinem Problemlöser 'strace' komme ich nicht weiter
Modem: Elsa Microlink 56K usb
Oberfläche: Afterstep
BS: Debian Sarga (Standardkernel mit einer Latte von geladenen Modulen)
Kann mir jemand weiterhelfen?
Vielen Danke Dirk
Hier ein paar eventuell relevante Angaben zur Problemanalyse:
-------------------------------------------------------------
Die Ausgabe von 'strace' gefiltert nach open und write:
strace -f -e open,write -o wvdia.txt wvdial
Hier noch ein paar Rechte von Verzeichnissen, die für wvdial wichtig sind
lsusb
Modem raus- und wieder reingesteckt
Was steht denn in der /var/log/messages zum Modem
ich versuche seit Wochen mit google hinter diese Meldung zu kommen:
cannot open /dev/ttyACM0: invalid argument
Seit Ewigkeiten benutze ich für die Einwahl ins Internet 'wvdial'.
Hatte bisher mehr oder wenige kaum Probleme damit.
Ich finde es gut, weil man dafür keine spezielle Oberfläche wie KDE oder Gnome braucht.
Trotz intensiver Suche mit google & Co bin ich keinen Schritt weiter.
Selbst mit meinem Problemlöser 'strace' komme ich nicht weiter
Modem: Elsa Microlink 56K usb
Oberfläche: Afterstep
BS: Debian Sarga (Standardkernel mit einer Latte von geladenen Modulen)
Kann mir jemand weiterhelfen?
Vielen Danke Dirk
Hier ein paar eventuell relevante Angaben zur Problemanalyse:
-------------------------------------------------------------
Die Ausgabe von 'strace' gefiltert nach open und write:
strace -f -e open,write -o wvdia.txt wvdial
Code:
2618 write(3, "WvDial: Internet dialer version "..., 38) = 38
2618 write(3, "\n", 1) = 1
2618 open("/var/lock/LCK..ttyACM1", O_RDWR|O_NONBLOCK|O_CREAT|O_EXCL|O_LARGEFILE, 0644) = 4
2618 write(4, " 2618\n", 11) = 11
2618 open("/dev/ttyACM1", O_RDWR|O_NONBLOCK|O_NOCTTY|O_LARGEFILE) = -1 EINVAL (Invalid argument)
2618 write(3, "--> ", 4) = 4
2618 write(3, "Cannot open /dev/ttyACM1: Invali"..., 42) = 42
2618 write(3, "\n", 1) = 1
2618 open("/var/lock/LCK..ttyACM1", O_RDWR|O_NONBLOCK|O_CREAT|O_EXCL|O_LARGEFILE, 0644) = 4
2618 write(4, " 2618\n", 11) = 11
2618 open("/dev/ttyACM1", O_RDWR|O_NONBLOCK|O_NOCTTY|O_LARGEFILE) = -1 EINVAL (Invalid argument)
2618 write(3, "--> ", 4) = 4
2618 write(3, "Cannot open /dev/ttyACM1: Invali"..., 42) = 42
Hier noch ein paar Rechte von Verzeichnissen, die für wvdial wichtig sind
Code:
l /dev/ttyACM1
247872 0 crw-rw---- 1 root dialout 166, 1 2005-02-26 07:43 /dev/ttyACM1
l /var/lock/
insgesamt 12
32520 4 drwxrwxrwt 3 root root 4096 2007-01-09 15:49 .
32385 4 drwxr-xr-x 14 root root 4096 2005-11-12 18:18 ..
229956 4 drwxr-xr-x 2 root root 4096 2006-01-09 13:30 subsys
l /etc/ppp/
insgesamt 104
469881 4 drwxr-xr-x 8 root dialout 4096 2007-01-07 16:13 .
469569 4 drwxr-xr-x 82 root root 4096 2007-01-09 15:35 ..
469998 4 -rw------- 1 root dialout 132 2006-02-24 10:23 chap-secrets
469920 4 -rwxr-xr-x 1 root dialout 1749 2005-05-05 19:32 ip-down
469924 4 drwxr-xr-x 2 root dialout 4096 2005-08-10 16:13 ip-down.d
469917 4 -rwxr-xr-x 1 root dialout 1887 2005-05-05 19:32 ip-up
469882 4 drwxr-xr-x 2 root dialout 4096 2005-08-10 16:13 ip-up.d
469919 4 -rwxr-xr-x 1 root dialout 779 2005-05-05 19:32 ipv6-down
469916 4 drwxr-xr-x 2 root dialout 4096 2005-05-05 19:32 ipv6-down.d
469923 4 -rwxr-xr-x 1 root dialout 917 2005-05-05 19:32 ipv6-up
469915 4 drwxr-xr-x 2 root dialout 4096 2005-05-05 19:32 ipv6-up.d
469922 16 -rw-r--r-- 1 root dialout 13206 2006-02-16 14:38 options
470766 16 -rw-r--r-- 1 root dialout 13208 2006-02-16 14:33 options_orginal
469997 4 -rw------- 1 root dialout 1678 2006-02-24 10:23 pap-secrets
469918 4 drwxr-s--- 2 root dialout 4096 2005-11-25 09:54 peers
469937 4 drwxr-xr-x 2 root dialout 4096 2005-03-23 19:04 resolv
470754 4 -rw-r--r-- 1 root dialout 51 2006-08-05 16:40 resolv
lsusb
Code:
lsusb
Bus 001 Device 002: ID 05cc:2265 ELSA AG MicroLink 56k
Bus 001 Device 001: ID 0000:0000
Code:
dmesg | tail -n 20
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xde000000,0x1000000 overlaps existing 0xde000000,0x200000
usb 1-1: USB disconnect, address 2
usb 1-1: new full speed USB device using address 3
usb 1-1: configuration #2 chosen from 2 choices
drivers/usb/class/cdc-acm.c: Ignoring extra header
usb 1-1: USB disconnect, address 3
usb 1-1: new full speed USB device using address 4
usb 1-1: configuration #2 chosen from 2 choices
drivers/usb/class/cdc-acm.c: Ignoring extra header
usb 1-1: USB disconnect, address 4
usb 1-1: new full speed USB device using address 5
usb 1-1: configuration #2 chosen from 2 choices
drivers/usb/class/cdc-acm.c: Ignoring extra header
usb 1-1: USB disconnect, address 5
usb 1-1: new full speed USB device using address 6
usb 1-1: configuration #2 chosen from 2 choices
drivers/usb/class/cdc-acm.c: Ignoring extra header
Code:
tail -n 20 -f /var/log/messages |grep -i usb
Jan 11 18:46:27 localhost kernel: usb 1-1: USB disconnect, address 6
Jan 11 18:46:33 localhost kernel: usb 1-1: new full speed USB device using address 7
Jan 11 18:46:33 localhost kernel: usb 1-1: configuration #2 chosen from 2 choices
Jan 11 18:46:35 localhost usb.agent[2922]: Keeping default configuration with /sys//devices/pci0000:00/0000:00:07.2/usb1/1-1
Jan 11 18:46:38 localhost usb.agent[2930]: cdc-acm: already loaded