Hauppauge WinTV Nexus-s unter 10.1

Dieses Thema im Forum "Grafik / Video" wurde erstellt von Aldaris, 30.06.2006.

  1. #1 Aldaris, 30.06.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Hi,
    habe Suse Linux 10.1 und wollte dem jetzt mla meine neue TV-Karte beibringen. Leider funktioniert das so nicht.
    Unter Yast erkennt der zwar eine TV-Karte, eine SAA7146, die kann ich auch konfigurieren (Bzw. immer auf weiter klicken, weis leider nicht, was ich da machen muss). Und dann steht die Karte da als konfiguriert.
    Starte ich dann KDETV passiert gar nichts (Schwarztes Bild) und wenn ich kaffeine von der console starte erzählt der mir was von no DVB Hardware found..

    Ich poste weitere informationen, müsst nur sagen was.
    Danke im vorraus
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. sven

    sven devilz|work

    Dabei seit:
    23.02.2006
    Beiträge:
    176
    Zustimmungen:
    0
    Ort:
    Rhein-Main
    Poste mal die die Ausgabe von dmesg (bitte in [ code ] Tags setzen).

    Mit Sicherheit fehlt dir die Firmware für die DVB Karte ... poste mal die Meldung, der Rest ist dann normal kein Thema ;)
     
  4. #3 Aldaris, 30.06.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Danke für die schnelle Hilfe!
    Code:
    Linux version 2.6.16.13-4-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed May 3 04:53:23 UTC 2006
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
     BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
     BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
     BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    found SMP MP-table at 000f4b70
    On node 0 totalpages: 131056
      DMA zone: 4096 pages, LIFO batch:0
      DMA32 zone: 0 pages, LIFO batch:0
      Normal zone: 126960 pages, LIFO batch:31
      HighMem zone: 0 pages, LIFO batch:0
    DMI 2.3 present.
    IO/L-APIC allowed because system is MP or new enough
    ACPI: RSDP (v000 GBT                                   ) @ 0x000f6650
    ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3000
    ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
    ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff6900
    ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda5 vga=0x317    resume=/dev/hda6  splash=silent
    bootsplash: silent mode.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 2000.281 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 513708k/524224k available (1491k kernel code, 9876k reserved, 607k data, 156k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4004.71 BogoMIPS (lpj=8009436)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
    Checking 'hlt' instruction... OK.
    checking if image is initramfs... it is
    Freeing initrd memory: 2315k freed
     not found!
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf9e50, last bus=2
    PCI: Using configuration type 1
    ACPI: Subsystem revision 20060127
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 4080-40bf claimed by ICH4 GPIO
    Boot video device is 0000:01:00.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 14 devices
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
    Setting up standard PCI resources
    PCI: Bridge: 0000:00:01.0
      IO window: disabled.
      MEM window: e0000000-e1ffffff
      PREFETCH window: d8000000-dfffffff
    PCI: Bridge: 0000:00:1e.0
      IO window: c000-cfff
      MEM window: e2000000-e3ffffff
      PREFETCH window: 30000000-300fffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1151661728.076:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 131072k
    vesafb: mode is 1024x768x16, linelength=2048, pages=1
    vesafb: protected mode interface info at c000:eda0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
    Console: switching to colour frame buffer device 124x44
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input0
    input: PC Speaker as /class/input/input1
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    NET: Registered protocol family 2
    IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
    TCP established hash table entries: 32768 (order: 5, 131072 bytes)
    TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 32768 bind 32768)
    TCP reno registered
    NET: Registered protocol family 1
    Using IPI Shortcut mode
    ACPI wakeup devices:
    SLPB PCI0 HUB0 USB0 USB1
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 156k freed
    Write protecting the kernel read-only data: 281k
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH2: IDE controller at PCI slot 0000:00:1f.1
    ICH2: chipset revision 18
    ICH2: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hda: WDC WD2500JB-00REA0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 512KiB
    hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
    hda: cache flushes supported
     hda: hda1 hda2 < hda5 hda6 hda7 >
    Probing IDE interface ide1...
    hdc: LITE-ON LTR-40125W, ATAPI CD/DVD-ROM drive
    hdd: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    ACPI: Processor [CPU0] (supports 2 throttling states)
    Attempting manual resume
    ReiserFS: hda5: found reiserfs format "3.6" with standard journal
    ReiserFS: hda5: using ordered data mode
    reiserfs: using flush barriers
    ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda5: checking transaction log (hda5)
    ReiserFS: hda5: Using r5 hash to sort names
    Adding 10490404k swap on /dev/hda6.  Priority:-1 extents:1 across:10490404k
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    lp0: using parport0 (interrupt-driven).
    hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 795kHz
    hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
    Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
    ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 169
    tulip0:  MII transceiver #1 config 3000 status 7829 advertising 01e1.
    eth0: Lite-On 82c168 PNIC rev 32 at 0001c000, 00:A0:CC:59:D5:FB, IRQ 169.
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    uhci_hcd 0000:00:1f.2: UHCI Host Controller
    uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1f.2: irq 177, io base 0x0000d000
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
    usb usb1: SerialNumber: 0000:00:1f.2
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Linux video capture interface: v1.00
    i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
    ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1f.4 to 64
    uhci_hcd 0000:00:1f.4: UHCI Host Controller
    uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1f.4: irq 185, io base 0x0000d800
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.16.13-4-default uhci_hcd
    usb usb2: SerialNumber: 0000:00:1f.4
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    Linux agpgart interface v0.101 (c) Dave Jones
    saa7146: register extension 'dvb'.
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    gameport: EMU10K1 is pci0000:02:04.1/gameport0, io 0xc800, speed 903kHz
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    usb 1-1: new device found, idVendor=046d, idProduct=c504
    usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 1-1: Product: USB Receiver
    usb 1-1: Manufacturer: Logitech
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    usb 1-1: configuration #1 chosen from 1 choice
    intel8x0_measure_ac97_clock: measured 54196 usecs
    intel8x0: clocking to 48000
    agpgart: Detected an Intel i845 Chipset.
    agpgart: AGP aperture is 128M @ 0xd0000000
    ALSA sound/core/init.c:132: cannot find the slot for index 1 (range 0-1)
    EMU10K1_Audigy: probe of 0000:02:04.0 failed with error -12
    ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 201
    saa7146: found saa7146 @ mem e1640000 (revision 1, irq 201) (0x13c2,0x000e).
    usb 1-2: new full speed USB device using uhci_hcd and address 3
    usb 1-2: new device found, idVendor=067b, idProduct=2303
    usb 1-2: new device strings: Mfr=0, Product=0, SerialNumber=0
    usb 1-2: configuration #1 chosen from 1 choice
    usbcore: registered new driver usbserial
    drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
    usbcore: registered new driver usbserial_generic
    drivers/usb/serial/usb-serial.c: USB Serial Driver core
    usbcore: registered new driver hiddev
    drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
    input: Logitech USB Receiver as /class/input/input2
    input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1f.2-1
    dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw
    dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware
    dvb-ttpci: and can be downloaded from http://www.linuxtv.org/download/dvb/firmware/
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: Logitech USB Receiver as /class/input/input3
    input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1f.2-1
    pl2303 1-2:1.0: pl2303 converter detected
    usb 1-2: pl2303 converter now attached to ttyUSB0
    usbcore: registered new driver pl2303
    drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    hw_random: RNG not detected
    device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
    dm-netlink version 0.0.2 loaded
    loop: loaded (max 8 devices)
    NTFS driver 2.1.26 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    NTFS-fs warning (device hda1): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    AppArmor: AppArmor (version 2.0-19.43r6320) initialized
    audit(1151661741.929:2): AppArmor (version 2.0-19.43r6320) initialized
    
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ACPI: Sleep Button (CM) [SLPB]
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    microcode: CPU0 updated from revision 0xf to 0x1e, date = 06052003
    IA-32 Microcode Update Driver v1.14 unregistered
    powernow: This module only works with AMD K7 CPUs
    eth0: no IPv6 routers present
    bootsplash: status on console 0 changed to on
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:12:17:b3:07:14:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
    cdrom: This disc doesn't have any tracks I recognize!
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:12:17:b3:07:14:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:12:17:b3:07:14:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1026 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1026 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1026 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1026 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.4 DST=192.168.1.255 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1026 DPT=137 LEN=58
    SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:12:17:b3:07:14:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
    
     
  5. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Code:
    dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw
    dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware
    dvb-ttpci: and can be downloaded from http://www.linuxtv.org/download/dvb/firmware/
    
    Genau wie ich vermutete ;)

    Saug dir von http://www.linuxtv.org/download/dvb/firmware/ die Datei dvb-ttpci-01.fw-2622 und benenne diese in dvb-ttpci-01.fw um.

    Verschiebe diese dann in /lib/firmware (als root) und entweder entfernst du das Kernelmodul und lädst es nochmal (rmmod dvb-ttpci und modprobe dvb-ttpci) oder rebootest ;)

    Das sollte es gewesen sein ...

    PS: Du brauchst wohl auch nen frischeres kaffeine für DVB Empfang ... nimm am besten die Packman Quellen und update ;) (Notfalls nochmal fragen *g*)
     
  6. #5 Aldaris, 30.06.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Sieht gut aus, war war dem lesen des Codes auch schon auf der Seite, aber welches nehmen. Na ja, hab das mal alles so gemacht und mein kaffeine findet immerhin schonmal kanäle.
    So hab ich die dann alle hinzugefügt und wollte mal eins schauen, kommt da:
    xine: Kann keinen Demultiplexer für >/root/.kaxtv.ts< finden
    xine: Inputplugin gefunden: Datei Plugin
    video_decoder: Kein Plugin gefunden zur Behandlung von 'XviD'
    xine: Demultiplexer-Plugin gefunden: AVI/RIFF demux plugin
    xine: Inputplugin gefunden: Datei Plugin

    Was das? Hat das was damit zu tun, was du eben meintest? ^^

    Lg
    Aldaris
     
  7. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  8. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
  9. #7 Aldaris, 04.07.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Danke, hab mich für die Smart Variante entschieden.

    Jetzt läuft auch alles als root bis auf die Fehlermeldung beim Start:
    Bindung zum Info-Socket kann nicht hergestellt werden!

    Läuft aber trotzdem, nur als user kann ich keine Sender suchen, Fehlermeldung:
    ..............................
    Not able to lock to the signal on the given frequency
    Frontend closed
    dvbsi: Cant tune DVB
    Transponders: 1
    dvbsi: The end :)
    Channels found: 0
    ICE default IO error handler doing an exit(), pid = 16114, errno = 0

    Wäre schon schöner als user, aber so geht ja auch immerhim..........aber wenn wer was weiß
     
Thema:

Hauppauge WinTV Nexus-s unter 10.1

Die Seite wird geladen...

Hauppauge WinTV Nexus-s unter 10.1 - Ähnliche Themen

  1. lirc vs. Hauppauge WinTV-Nova-S-plus

    lirc vs. Hauppauge WinTV-Nova-S-plus: Hallo zusammen, ich versuche nun schon seit ein paar Tagen meine Fernbedienung in mein System (Kubuntu 7.10) einzubinden. Nach dem Herunterladen...
  2. Hauppauge WinTV-HVR-1300

    Hauppauge WinTV-HVR-1300: Hauppauge WinTV-HVR-1300 ohne analog TV Hallo Ich habe mir o.g. Karte gekauft. System Gentoo 2007 x86_64 Kernel gentoo-sources-2.6.21. Ich habe...
  3. Hauppauge PVR250 (WinTV) - Karte läuft, nur wie kann ich fersehen?

    Hauppauge PVR250 (WinTV) - Karte läuft, nur wie kann ich fersehen?: Hallo, ich bemühe mich schon seit Stunden um diese Karte, aber zum fersehen schauen bin ich nicht bekommen. Ich meine aber, ich stehe kurz...
  4. Hauppauge_WinTV BT878 mit Bild jedoch ohne Sound

    Hauppauge_WinTV BT878 mit Bild jedoch ohne Sound: Ich habe eine WinTV-PCI Karte von Hauppauge mit bt878 Chip in meinem Rechner, welche von OpenSuSe 10.1 32-Bit x86 auch erkannt wurde. Der...
  5. TV HAUPPAUGE WinTV HVR 1100 (DVB-T & analog, PCI)

    TV HAUPPAUGE WinTV HVR 1100 (DVB-T & analog, PCI): Hallo Weiß jemand, ob diese Karte korrekt unter Linux funktioniert? TV HAUPPAUGE WinTV HVR 1100 (DVB-T & analog, PCI)...