ATI x850XT pcie mit Cedega und 3d Acceleration

Dieses Thema im Forum "SuSE / OpenSuSE" wurde erstellt von morph2k2, 29.11.2005.

  1. #1 morph2k2, 29.11.2005
    morph2k2

    morph2k2 Jungspund

    Dabei seit:
    14.11.2005
    Beiträge:
    10
    Zustimmungen:
    0
    Hallo,

    ich habe ein Problem, ich habe mich entschlossen mal wieder Linux zu installieren und habe mich für Suse 10.0 entschieden.

    Habe mir dann auch mal eine Cedega Lizenz für 3 Monate besorgt.
    Jetzt habe ich die Treiber von der ATI Seite installiert, aber leider sind bei den Cedega Tests keine Erfolge zu erzielen, die 3D Acceleration funktioniert nicht "Failed".

    Habt ihr eine Idee wie ich das in den Griff bekomme ?

    Wäre euch echt dankbar ;)

    Gruß MoRpH2k2
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 DennisM, 29.11.2005
    DennisM

    DennisM Moderator u. Newsposter

    Dabei seit:
    08.05.2004
    Beiträge:
    4.883
    Zustimmungen:
    0
    Ort:
    GER/NRW/Essen
  4. #3 morph2k2, 29.11.2005
    morph2k2

    morph2k2 Jungspund

    Dabei seit:
    14.11.2005
    Beiträge:
    10
    Zustimmungen:
    0
    Hmm so habe ich das auch schon probiert, leider habe ich trotzdem kein Erfolg. Immer noch kein Erfolg mit dem OpenGL und 3d Acceleration.

    Habe einen P4 3,2 mit HT falls das was hilft, weil da bei dem 1. Link irgendetwas von 64 bit steht ...
     
  5. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    ati kernel modul geladen ? (zeigen *g*)

    in der xorg.conf is fglrx als treiber eingetrage ? (zeigen *g*)
     
  6. #5 DennisM, 29.11.2005
    DennisM

    DennisM Moderator u. Newsposter

    Dabei seit:
    08.05.2004
    Beiträge:
    4.883
    Zustimmungen:
    0
    Ort:
    GER/NRW/Essen
    Wenn er fglrxconfig ausgeführt hat schon :)

    MFG

    Dennis
     
  7. #6 morph2k2, 29.11.2005
    morph2k2

    morph2k2 Jungspund

    Dabei seit:
    14.11.2005
    Beiträge:
    10
    Zustimmungen:
    0
    Also in der xorg.conf ist Fglrx als Treiber eingetragen, ich habe fglrxconfig ausgeführt ja, habe den Rechner auch neu gestartet, und der Kernel wurde ebenfalls kompiliert ... aber keine Ahnung warum das mit Cedega nicht klappt ... hatte bisher immer Probleme ATI Karten bei mir unter Linux zu installieren ... hab es die letzten Jahre immer wieder probiert, und vor einem halbem Jahr mal geschafft ... naja jetzt ist ein neuer Rechner da udn die Probleme gehen von vorne los
     
  8. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Mach mal "lsmod | grep fglrx" und poste die Ausgabe ... außerdem noch die Ausgabe von "glxinfo" und die /etc/X11/xorg.conf bitte anhängen ...
     
  9. #8 morph2k2, 30.11.2005
    morph2k2

    morph2k2 Jungspund

    Dabei seit:
    14.11.2005
    Beiträge:
    10
    Zustimmungen:
    0
    fglrxinfo:
    Code:
    trav:~ # fglrxinfo
    display: :0.0  screen: 0
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
    
    glxinfo:
    Code:
    trav:~ # glxinfo
    name of display: :0.0
    display: :0  screen: 0
    direct rendering: No
    server glx vendor string: SGI
    server glx version string: 1.2
    server glx extensions:
        GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
        GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
        GLX_SGIS_multisample, GLX_SGIX_fbconfig
    client glx vendor string: SGI
    client glx version string: 1.4
    client glx extensions:
        GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
        GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
        GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
        GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
        GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
        GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
    GLX extensions:
        GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
        GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIS_multisample
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
    OpenGL extensions:
        GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
        GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
        GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
        GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
        GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
        GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
        GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
        GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
        GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
        GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
        GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
        GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
        GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
        GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
        GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
        GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
        GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
        GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
        GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
        GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
        GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
        GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
        GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
        GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
        GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
        GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
    glu version: 1.3
    glu extensions:
        GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
    
       visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
     id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
    ----------------------------------------------------------------------
    0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x24 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x27 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x29 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x2b 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x2c 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x2d 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x2e 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x2f 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x30 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x31 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x32 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x33 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x34 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x35 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x36 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x37 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x38 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x39 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x3a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x3b 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x3c 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x3d 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x3e 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x3f 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x40 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x41 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x42 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x43 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x44 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x45 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x46 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x47 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x48 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x49 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x4a 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x4b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x4c 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x4d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x4e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x4f 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x50 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x51 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x52 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x53 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x54 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x55 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x56 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x57 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x58 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x59 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x5a 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x5b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x5c 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 None
    0x5d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x5e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 None
    0x5f 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x60 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x61 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    0x62 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
    
    lsmod:
    Code:
    trav:~ # lsmod | grep fglrx
    fglrx                 436256  7
    agpgart                38476  1 fglrx
    
    xorg.conf:
    Code:
    # File: xorg.conf
    # File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
    
    # Note by ATI: the below copyright notice is there for servicing possibly
    # pending third party rights on the file format and the instance of this file.
    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # 
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # 
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # 
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #
    
    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of 
    # this file.
    # **********************************************************************
    
    # **********************************************************************
    # DRI Section
    # **********************************************************************
    Section "dri"
    # Access to OpenGL ICD is allowed for all users:
        Mode 0666
    # Access to OpenGL ICD is restricted to a specific user group:
    #    Group 100    # users
    #    Mode 0660
    EndSection
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the Type1 and FreeType font modules
        Load        "type1"
        Load        "freetype"
    
    # This loads the GLX module
        Load        "glx"   # libglx.a
        Load        "dri"   # libdri.a
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # 
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    # 
    
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    
    # The module search path.  The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client. 
    
    #    Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings. 
    
    #    Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option "AllowNonLocalModInDev"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option "Protocol"   "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option "Xleds"      "1 2 3"
    
    #    Option "LeftAlt"    "Meta"
    #    Option "RightAlt"   "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"   "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"   "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"  "de"
    # or:
    #    Option "XkbLayout"  "de"
    #    Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions" "ctrl:swapcaps"
    
    # These are the default XKB settings for XFree86
    #    Option "XkbRules"   "xfree86"
    #    Option "XkbModel"   "pc101"
    #    Option "XkbLayout"  "us"
    #    Option "XkbVariant" ""
    #    Option "XkbOptions" ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"	"xfree86"
        Option "XkbModel"	"pc101"
        Option "XkbLayout"	"de"
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver "mouse"
        Option "Protocol"   "ImPS/2"
        Option "ZAxisMapping"   "4 5"
        Option "Device"     "/dev/input/mice"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"   "Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"   "9600"
    #    Option "SampleRate" "150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    
    # **********************************************************************
    # Other input device sections 
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the XF86Config man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice" 
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"         "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"         "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"         "/dev/ttyS0"
    #    Option     "MinX"           "1412"
    #    Option     "MaxX"           "15184"
    #    Option     "MinY"           "15372"
    #    Option     "MaxY"           "1230"
    #    Option     "ScreenNumber"   "0"
    #    Option     "ReportingMode"  "Scaled"
    #    Option     "ButtonNumber"   "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"         "/dev/ttyS0"
    #    Option     "MinX"           "231"
    #    Option     "MaxX"           "3868"
    #    Option     "MinY"           "3858"
    #    Option     "MaxY"           "272"
    #    Option     "ScreenNumber"   "0"
    #    Option     "ReportingMode"  "Scaled"
    #    Option     "ButtonThreshold"    "17"
    #    Option     "ButtonNumber"   "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
        Identifier  "Monitor0"
    # === mode lines based on GTF ===
    # VGA @ 100Hz
    # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
    # SVGA @ 100Hz
    # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
    # XVGA @ 100Hz
    # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
    # 1152x864 @ 60Hz
    # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
    # 1152x864 @ 85Hz
    # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
    # 1152x864 @ 100Hz
    # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
    # 1280x960 @ 75Hz
    # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
    # 1280x960 @ 100Hz
    # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
    # SXGA @ 100Hz
    # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
    # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
    # Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
    # 1600x1000 @ 60Hz
    # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
    # 1600x1000 @ 75Hz
    # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
    # 1600x1000 @ 85Hz
    # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
    # 1600x1000 @ 100Hz
    # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
    # 1600x1024 @ 60Hz
    # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
    # 1600x1024 @ 75Hz
    # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
    # 1600x1024 @ 76Hz
    # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
    # 1600x1024 @ 85Hz
    # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
    # 1920x1080 @ 60Hz
    # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
    # 1920x1080 @ 75Hz
    # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
    # 1920x1200 @ 60Hz
    # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
    # 1920x1200 @ 75Hz
    # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 1400x1050 @ 60Hz M9 Laptop mode 
    # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
    # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
    # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset     "generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver      "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # installed.
    
    #    BusID       "PCI:0:10:0"
    
    #    VideoRam    256
    
    #    Clocks      25.2 28.3
    
    EndSection
    
    # === ATI device section ===
    
    Section "Device"
        Identifier                          "ATI Graphics Adapter"
        Driver                              "fglrx"
    # ### generic DRI settings ###
    # === disable PnP Monitor  ===
        #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === misc DRI settings ===
        Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
    # ### FireGL DDX driver module specific settings ###
    # === Screen Management ===
        Option "DesktopSetup"               "(null)" 
        Option "ScreenOverlap"              "0" 
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
        Option "CapabilitiesEx"             "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "yes"
        Option "ForceGenericCPU"            "no"
        Option "KernelModuleParm"           "agplock=0" # AGP locked user pages: disabled
        BusID "PCI:1:0:0"    # vendor=1002, device=5d4d
        Screen 0
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen0"
        Device      "ATI Graphics Adapter"
        Monitor     "Monitor0"
        DefaultDepth 24
        #Option "backingstore"
    
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768"
            ViewPort    0 0  # initial origin if mode is smaller than desktop
    #        Virtual     1280 1024
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Server Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.
    
        Screen "Screen0"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    ### EOF ###
    
    Gruß MoRpH2k2
     
  10. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Kannst du mal /var/log/Xorg.0.log anhängen ?
     
  11. #10 morph2k2, 30.11.2005
    morph2k2

    morph2k2 Jungspund

    Dabei seit:
    14.11.2005
    Beiträge:
    10
    Zustimmungen:
    0
    xorg log
    Code:
    X Window System Version 6.8.2
    Release Date: 9 February 2005
    X Protocol Version 11, Revision 0, Release 6.8.2
    Build Operating System: SuSE Linux [ELF] SuSE
    Current Operating System: Linux trav 2.6.13-15-smp #1 SMP Tue Sep 13 14:56:15 UTC 2005 i686
    Build Date: 12 September 2005
    	Before reporting problems, check http://wiki.X.Org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 30 13:52:44 2005
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Server Layout"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "ATI Graphics Adapter"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.2
    	X.Org Video Driver: 0.7
    	X.Org XInput driver : 0.4
    	X.Org Server Extension : 0.2
    	X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 0.7
    (--) using VT number 7
    
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2584 card 1028,0177 rev 04 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,2585 card 0000,0000 rev 04 class 06,04,00 hdr 01
    (II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 03 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,2658 card 1028,0177 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,2659 card 1028,0177 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,265a card 1028,0177 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:3: chip 8086,265b card 1028,0177 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,265c card 1028,0177 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,2640 card 0000,0000 rev 03 class 06,01,00 hdr 80
    (II) PCI: 00:1f:2: chip 8086,2652 card 1028,0177 rev 03 class 01,01,80 hdr 00
    (II) PCI: 00:1f:3: chip 8086,266a card 1028,0177 rev 03 class 0c,05,00 hdr 00
    (II) PCI: 01:00:0: chip 1002,5d4d card 1002,0302 rev 00 class 03,00,00 hdr 80
    (II) PCI: 01:00:1: chip 1002,5d6d card 1002,0303 rev 00 class 03,80,00 hdr 00
    (II) PCI: 02:00:0: chip 14e4,1677 card 1028,0177 rev 01 class 02,00,00 hdr 00
    (II) PCI: 04:01:0: chip 1102,0004 card 1102,2006 rev 04 class 04,01,00 hdr 80
    (II) PCI: 04:01:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
    (II) PCI: 04:01:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
    	[0] -1	0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    	[0] -1	0	0xdfe00000 - 0xdfffffff (0x200000) MX[B]
    (II) Bus 1 prefetchable memory range:
    	[0] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 2 non-prefetchable memory range:
    	[0] -1	0	0xdfd00000 - 0xdfdfffff (0x100000) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 3 non-prefetchable memory range:
    	[0] -1	0	0xdfc00000 - 0xdfcfffff (0x100000) MX[B]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:30:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
    (II) Bus 4 non-prefetchable memory range:
    	[0] -1	0	0xdfb00000 - 0xdfbfffff (0x100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5d4d) rev 0, Mem @ 0xc0000000/28, 0xdfee0000/16, I/O @ 0xdc00/8, BIOS @ 0xdff00000/17
    (--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5d6d) rev 0, Mem @ 0xdfef0000/16
    (II) Addressable bus resource ranges are
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) Active PCI resource ranges:
    	[0] -1	0	0xdfbfc000 - 0xdfbfffff (0x4000) MX[B]
    	[1] -1	0	0xdfbfb800 - 0xdfbfbfff (0x800) MX[B]
    	[2] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
    	[3] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
    	[4] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[5] -1	0	0xdff00000 - 0xdff1ffff (0x20000) MX[B](B)
    	[6] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[7] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    	[8] -1	0	0x0000ccb8 - 0x0000ccbf (0x8) IX[B]
    	[9] -1	0	0x0000ccc0 - 0x0000ccff (0x40) IX[B]
    	[10] -1	0	0x0000ece0 - 0x0000ecff (0x20) IX[B]
    	[11] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    	[12] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
    	[13] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
    	[14] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
    	[15] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[16] -1	0	0x0000ff20 - 0x0000ff3f (0x20) IX[B]
    	[17] -1	0	0x0000ff40 - 0x0000ff5f (0x20) IX[B]
    	[18] -1	0	0x0000ff60 - 0x0000ff7f (0x20) IX[B]
    	[19] -1	0	0x0000ff80 - 0x0000ff9f (0x20) IX[B]
    	[20] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B](B)
    (II) Active PCI resource ranges after removing overlaps:
    	[0] -1	0	0xdfbfc000 - 0xdfbfffff (0x4000) MX[B]
    	[1] -1	0	0xdfbfb800 - 0xdfbfbfff (0x800) MX[B]
    	[2] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
    	[3] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
    	[4] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[5] -1	0	0xdff00000 - 0xdff1ffff (0x20000) MX[B](B)
    	[6] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[7] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    	[8] -1	0	0x0000ccb8 - 0x0000ccbf (0x8) IX[B]
    	[9] -1	0	0x0000ccc0 - 0x0000ccff (0x40) IX[B]
    	[10] -1	0	0x0000ece0 - 0x0000ecff (0x20) IX[B]
    	[11] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    	[12] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
    	[13] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
    	[14] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
    	[15] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[16] -1	0	0x0000ff20 - 0x0000ff3f (0x20) IX[B]
    	[17] -1	0	0x0000ff40 - 0x0000ff5f (0x20) IX[B]
    	[18] -1	0	0x0000ff60 - 0x0000ff7f (0x20) IX[B]
    	[19] -1	0	0x0000ff80 - 0x0000ff9f (0x20) IX[B]
    	[20] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfbfc000 - 0xdfbfffff (0x4000) MX[B]
    	[6] -1	0	0xdfbfb800 - 0xdfbfbfff (0x800) MX[B]
    	[7] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
    	[8] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
    	[9] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[10] -1	0	0xdff00000 - 0xdff1ffff (0x20000) MX[B](B)
    	[11] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[12] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[15] -1	0	0x0000ccb8 - 0x0000ccbf (0x8) IX[B]
    	[16] -1	0	0x0000ccc0 - 0x0000ccff (0x40) IX[B]
    	[17] -1	0	0x0000ece0 - 0x0000ecff (0x20) IX[B]
    	[18] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    	[19] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
    	[20] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
    	[21] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
    	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[23] -1	0	0x0000ff20 - 0x0000ff3f (0x20) IX[B]
    	[24] -1	0	0x0000ff40 - 0x0000ff5f (0x20) IX[B]
    	[25] -1	0	0x0000ff60 - 0x0000ff7f (0x20) IX[B]
    	[26] -1	0	0x0000ff80 - 0x0000ff9f (0x20) IX[B]
    	[27] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B](B)
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.2
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 6.8.2, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
    (II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  object file contains no symbols
    (II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  object file contains no symbols
    (II) Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  object file contains no symbols
    (II) Module GLcore: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
    (II) Module drm: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.2
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "fglrx"
    (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    	compiled for 6.8.0, module version = 8.19.10
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 0.4
    (II) LoadModule: "kbd"
    (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
    (II) Module kbd: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 0.4
    (II) ATI Radeon/FireGL: The following chipsets are supported:
    	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
    	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
    	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
    	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
    	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
    	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
    	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
    	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
    	RADEON 9600 PRO (RV360 4152),
    	MOBILITY RADEON 9600/9700 (M10/M11 4E50),
    	MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
    	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
    	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
    	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
    	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
    	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
    	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
    	FireGL X2-256/X2-256t (R350 4E4B),
    	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
    	RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
    	FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
    	MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
    	RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
    	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
    	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
    	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
    	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
    	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
    	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
    	RADEON X800 PRO (R423 5549),
    	RADEON X800 XT Platinum Edition (R423 554A),
    	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
    	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
    	MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
    	RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
    	RADEON X850 XT Platinum Edition (R480 5D4D),
    	RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
    	MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
    	FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
    	RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
    	RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
    	RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
    	MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
    	RADEON 9100 IGP (RS300 5834),
    	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
    	MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
    	RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
    	RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
    	RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
    	RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
    (II) Primary Device is: PCI 01:00:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.19.10
    (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.19g1                           
    (II) ATI Proprietary Linux Driver Build Date: Nov  9 2005 17:51:16
    (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.19.1-driver-lnx-226030
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (--) Chipset RADEON X850 XT Platinum Edition (R480 5D4D) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfbfc000 - 0xdfbfffff (0x4000) MX[B]
    	[6] -1	0	0xdfbfb800 - 0xdfbfbfff (0x800) MX[B]
    	[7] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
    	[8] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
    	[9] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[10] -1	0	0xdff00000 - 0xdff1ffff (0x20000) MX[B](B)
    	[11] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[12] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[15] -1	0	0x0000ccb8 - 0x0000ccbf (0x8) IX[B]
    	[16] -1	0	0x0000ccc0 - 0x0000ccff (0x40) IX[B]
    	[17] -1	0	0x0000ece0 - 0x0000ecff (0x20) IX[B]
    	[18] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    	[19] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
    	[20] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
    	[21] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
    	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[23] -1	0	0x0000ff20 - 0x0000ff3f (0x20) IX[B]
    	[24] -1	0	0x0000ff40 - 0x0000ff5f (0x20) IX[B]
    	[25] -1	0	0x0000ff60 - 0x0000ff7f (0x20) IX[B]
    	[26] -1	0	0x0000ff80 - 0x0000ff9f (0x20) IX[B]
    	[27] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B](B)
    (II) fglrx(0): pEnt->device->identifier=0x8223958
    (II) resource ranges after probing:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfbfc000 - 0xdfbfffff (0x4000) MX[B]
    	[6] -1	0	0xdfbfb800 - 0xdfbfbfff (0x800) MX[B]
    	[7] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
    	[8] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
    	[9] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[10] -1	0	0xdff00000 - 0xdff1ffff (0x20000) MX[B](B)
    	[11] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[12] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    	[13] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[14] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[15] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[18] -1	0	0x0000ccb8 - 0x0000ccbf (0x8) IX[B]
    	[19] -1	0	0x0000ccc0 - 0x0000ccff (0x40) IX[B]
    	[20] -1	0	0x0000ece0 - 0x0000ecff (0x20) IX[B]
    	[21] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    	[22] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
    	[23] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
    	[24] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
    	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[26] -1	0	0x0000ff20 - 0x0000ff3f (0x20) IX[B]
    	[27] -1	0	0x0000ff40 - 0x0000ff5f (0x20) IX[B]
    	[28] -1	0	0x0000ff60 - 0x0000ff7f (0x20) IX[B]
    	[29] -1	0	0x0000ff80 - 0x0000ff9f (0x20) IX[B]
    	[30] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B](B)
    	[31] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[32] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [R200PreInit] === begin, [s]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 0.7
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "NoAccel" "no"
    (**) fglrx(0): Option "NoDRI" "no"
    (**) fglrx(0): Option "Capabilities" "0x00000000"
    (**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
    (**) fglrx(0): Option "KernelModuleParm" "agplock=0"
    (**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
    (**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
    (**) fglrx(0): Option "OpenGLOverlay" "off"
    (**) fglrx(0): Option "VideoOverlay" "on"
    (**) fglrx(0): Option "DesktopSetup" "(null)"
    (**) fglrx(0): Option "ScreenOverlap" "0"
    (**) fglrx(0): Option "UseInternalAGPGART" "yes"
    (**) fglrx(0): Option "Stereo" "off"
    (**) fglrx(0): Option "StereoSyncEnable" "1"
    (**) fglrx(0): Option "UseFastTLS" "0"
    (**) fglrx(0): Option "BlockSignalsOnLock" "on"
    (**) fglrx(0): Option "ForceGenericCPU" "no"
    (**) fglrx(0): Option "CenterMode" "off"
    (**) fglrx(0): Option "FSAAScale" "1"
    (**) fglrx(0): Option "FSAAEnable" "no"
    (**) fglrx(0): Option "FSAADisableGamma" "no"
    (**) fglrx(0): Option "FSAACustomizeMSPos" "no"
    (**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
    (**) fglrx(0): Option "PseudoColorVisuals" "off"
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x00000000
    (**) fglrx(0): Gamma Correction for II is 0x00000000
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 0.7
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (**) fglrx(0): Option "mtrr" "off"
    (--) fglrx(0): Chipset: "RADEON X850 XT Platinum Edition (R480 5D4D)" (Chipset = 0x5d4d)
    (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0302)
    (--) fglrx(0): board vendor info: original ATI graphics adapter
    (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    (--) fglrx(0): MMIO registers at 0xdfee0000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/X11R6/lib/modules/libvbe.a
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 0.7
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 9.7
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2003, ATI Technologies Inc. 
    (II) fglrx(0): VESA VBE OEM Product: R480
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Reloading /usr/X11R6/lib/modules/linux/libdrm.a
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmGetBusid returned ''
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 0.7
    (II) fglrx(0): Connected Display1: CRT on primary DAC
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: MED  Model: 9b0  Serial#: 1127
    (II) fglrx(0): Year: 2005  Week: 7
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
    (II) fglrx(0): Sync:  Separate
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 38  vert.: 30
    (II) fglrx(0): Gamma: 2.50
    (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
    (II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.640 redY: 0.329   greenX: 0.300 greenY: 0.600
    (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1280x1024@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
    (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) fglrx(0): Monitor name: MD30219PH
    (II) fglrx(0): Ranges: V min: 56  V max: 76 Hz, H min: 30  H max: 83 kHz, PixClock max 140 MHz
    (II) fglrx(0): Serial No: 502071127
    (II) fglrx(0): End of Display1 EDID data --------------------
    (WW) fglrx(0): Specified desktop setup not supported: 8
    (II) fglrx(0): Primary Controller - CRT on primary DAC
    (II) fglrx(0): Internal Desktop Setting: 0x00000004
    (II) fglrx(0): POWERplay version 3.  1 power state available:
    (II) fglrx(0):   1. 540/587MHz @ 0Hz [enable load balancing]
    (**) fglrx(0): Qbs disabled
    (==) fglrx(0): FAST_SWAP disabled
    (**) fglrx(0):  PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) fglrx(0): Center Mode is disabled 
    (==) fglrx(0): TMDS coherent mode is enabled 
    (II) fglrx(0): Total of 35 modes found for primary display.
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066
    (**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync
    (**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
    (**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
    (**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
    (**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
    (**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
    (II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 772 817 interlace
    (**) fglrx(0):  Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x720"   74.48  1280 1336 1472 1664  720 721 724 746 +hsync +vsync
    (**) fglrx(0):  Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900
    (**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864"   96.77  1152 1224 1344 1536  864 865 868 900 +hsync
    (**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
    (**) fglrx(0):  Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "960x720"   55.86  960 1008 1104 1248  720 721 724 746
    (**) fglrx(0):  Default mode "856x480": 31.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "856x480"   31.73  856 872 960 1064  480 481 484 497
    (**) fglrx(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
    (**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
    (**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
    (**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
    (**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
    (**) fglrx(0):  Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
    (II) fglrx(0): Modeline "800x600"   29.61  800 816 896 992  600 601 604 635 interlace +hsync
    (**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"   26.72  720 736 808 896  480 481 484 497 +hsync
    (**) fglrx(0):  Default mode "704x480": 26.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "704x480"   26.24  704 720 792 880  480 481 484 497 +hsync
    (**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
    (**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
    (**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
    (**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
    (**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
    (**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
    (**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
    (**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
    (**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
    (**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
    (**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
    (--) fglrx(0): Display dimensions: (380, 300) mm
    (--) fglrx(0): DPI set to (85, 86)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.a
    (II) Module ramdac: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 0.7
    (**) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="X.Org Foundation"
    	compiled for 6.8.2, module version = 1.2.0
    	ABI class: X.Org Video Driver, version 0.7
    (==) fglrx(0): HPV inactive
    (==) fglrx(0): FSAA enabled: NO
    (**) fglrx(0): FSAA Gamma enabled
    (**) fglrx(0): FSAA Multisample Position is fix
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    	compiled for 6.8.0, module version = 8.19.10
    	ABI class: X.Org Server Extension, version 0.2
    (II) fglrx(0): Depth moves disabled by default
    (**) fglrx(0): Capabilities: 0x00000000
    (**) fglrx(0): CapabilitiesEx: 0x00000000
    (**) fglrx(0): cpuFlags: 0x8000001d
    (**) fglrx(0): cpuSpeedMHz: 0x00000c78
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): KernelModuleParm: "agplock=0"
    (**) fglrx(0): UseFastTLS=0
    (**) fglrx(0): BlockSignalsOnLock=1
    (==) fglrx(0): EnablePrivateBackZ = NO
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] 0	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B]
    	[1] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B]
    	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[7] -1	0	0xdfbfc000 - 0xdfbfffff (0x4000) MX[B]
    	[8] -1	0	0xdfbfb800 - 0xdfbfbfff (0x800) MX[B]
    	[9] -1	0	0xdfdf0000 - 0xdfdfffff (0x10000) MX[B]
    	[10] -1	0	0xffa80800 - 0xffa80bff (0x400) MX[B]
    	[11] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[12] -1	0	0xdff00000 - 0xdff1ffff (0x20000) MX[B](B)
    	[13] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
    	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[18] 0	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]
    	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[21] -1	0	0x0000ccb8 - 0x0000ccbf (0x8) IX[B]
    	[22] -1	0	0x0000ccc0 - 0x0000ccff (0x40) IX[B]
    	[23] -1	0	0x0000ece0 - 0x0000ecff (0x20) IX[B]
    	[24] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    	[25] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
    	[26] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
    	[27] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
    	[28] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[29] -1	0	0x0000ff20 - 0x0000ff3f (0x20) IX[B]
    	[30] -1	0	0x0000ff40 - 0x0000ff5f (0x20) IX[B]
    	[31] -1	0	0x0000ff60 - 0x0000ff7f (0x20) IX[B]
    	[32] -1	0	0x0000ff80 - 0x0000ff9f (0x20) IX[B]
    	[33] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B](B)
    	[34] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[35] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) fglrx(0): UMM Bus area:     0xc0701000 (size=0x078ef000)
    (II) fglrx(0): UMM area:     0xc0701000 (size=0x078ef000)
    (II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
    (II) fglrx(0): detected X.org 6.8.2.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmOpenByBusid: drmOpenMinor returns 5
    drmOpenByBusid: drmGetBusid reports 
    drmOpenDevice: node name is /dev/dri/card1
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card2
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card3
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card4
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card5
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card6
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card7
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card8
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card9
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card10
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card11
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card12
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card13
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card14
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -1023
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 5, (OK)
    drmGetBusid returned ''
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8c2b000
    (II) fglrx(0): [drm] mapped SAREA 0xf8c2b000 to 0x40024000
    (II) fglrx(0): [drm] framebuffer handle = 0xc0000000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0):     Name: fglrx
    (II) fglrx(0):     Version: 8.19.10
    (II) fglrx(0):     Date: Nov  9 2005
    (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.13-15-smp
    (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
    (II) fglrx(0):     Build-Kernel __SMP__:            no
    (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    (II) fglrx(0): [drm] register handle = 0xdfee0000
    (II) fglrx(0): [pcie] 65536 kB allocated with handle 0xdeadbeef
    (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (II) fglrx(0): [drm] texture shared area handle = 0xf949b000
    (II) fglrx(0): shared FSAAScale=1
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00701000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
    (==) fglrx(0): Backing store disabled
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor (scanline 1024)
    (II) fglrx(0): Largest offscreen area available: 1280 x 402
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    	Screen to screen bit blits
    	Solid filled rectangles
    	8x8 mono pattern filled rectangles
    	Solid Lines
    	Dashed Lines
    	Offscreen Pixmaps
    	Setting up tile and stipple cache:
    		30 128x128 slots
    (II) fglrx(0): Acceleration enabled
    (II) fglrx(0): X context handle = 0x00000001
    (II) fglrx(0): [DRI] installation complete
    (II) fglrx(0): Direct rendering enabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (==) RandR enabled
    (II) Setting vga for screen 0.
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (**) Option "Protocol" "ImPS/2"
    (**) Mouse1: Device: "/dev/input/mice"
    (**) Mouse1: Protocol: "ImPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse1: ZAxisMapping: buttons 4 and 5
    (**) Mouse1: Buttons: 5
    (**) Option "CoreKeyboard"
    (**) Keyboard1: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard1: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) Keyboard1: XkbRules: "xfree86"
    (**) Option "XkbModel" "pc101"
    (**) Keyboard1: XkbModel: "pc101"
    (**) Option "XkbLayout" "de"
    (**) Keyboard1: XkbLayout: "de"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard1: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
    (II) 3rd Button detected: disabling emulate3Button
    
     
  12. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  13. #11 DennisM, 30.11.2005
    DennisM

    DennisM Moderator u. Newsposter

    Dabei seit:
    08.05.2004
    Beiträge:
    4.883
    Zustimmungen:
    0
    Ort:
    GER/NRW/Essen
  14. #12 morph2k2, 30.11.2005
    morph2k2

    morph2k2 Jungspund

    Dabei seit:
    14.11.2005
    Beiträge:
    10
    Zustimmungen:
    0
    Das wars ;) es funktioniert DANKE !!!!
     
Thema:

ATI x850XT pcie mit Cedega und 3d Acceleration

Die Seite wird geladen...

ATI x850XT pcie mit Cedega und 3d Acceleration - Ähnliche Themen

  1. 3D Aktivierung ATI X850XT

    3D Aktivierung ATI X850XT: Hi, kurz Sysinfo: Betriebssystem: Linux 2.6.16.13-4-default x86_64 Aktueller Benutzer: wassili@wassili-3700 System: SUSE LINUX 10.1...
  2. Radeon X850XT Treiber auf Neuinstallation, DICKES PROBLEM

    Radeon X850XT Treiber auf Neuinstallation, DICKES PROBLEM: Hallo alle zusammen, ich hab da ein folgendes Problem: Zurzeit besitze ich SuSe 10.1 und würde gerne nach einer Neuinstallation den neuen...
  3. Treiber für X850XT nach Neuinstallation installieren?-Problem

    Treiber für X850XT nach Neuinstallation installieren?-Problem: Hi Leute..... Gestern hab ich mir mein Linux drauf gehauen und würde gerne die POwer aus meiner Gafikkarte (Radeon X850Xt) herausholen.....nur...
  4. Red Hat 6.1 auf Raid 0 System Bootloader, PCIe SSD Windows 7

    Red Hat 6.1 auf Raid 0 System Bootloader, PCIe SSD Windows 7: Hallo Community, vielleicht ist jemand hier der mir bei dem folgendem Problem weiterhelfen kann? Red Hat 6.1 möchte ich auf einem Raid 0 System...
  5. PCIe SATA II - Hardwarekauf

    PCIe SATA II - Hardwarekauf: Hallo, ich will kurzfristig eine PCIe SATA II Karte nachrüsten (u.a. für einen BluRay Brenner http://www.csv.de/artinfo.php?artnr=A0820215 ) In...