Hallo,
also:
Ich habe inzwischen rausgefunden dass die Soundkarte vom System richtig erkannt wird.
auf den Befehl
hwinfo --sound
bekommen ich folgendes Ergebnis:
> hal.1: read hal dataprocess 8822: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCI 1f.5: 0401 Multimedia audio controller
[Created at pci.318]
Unique ID: W60f.kjXwA3Ew7C7
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: sound
Model: "Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24c5 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller"
SubVendor: pci 0x414c
SubDevice: pci 0x4760
Revision: 0x02
Driver: "Intel ICH"
Driver Modules: "snd_intel8x0"
I/O Ports: 0xb400-0xb4ff (rw)
I/O Ports: 0xb800-0xb83f (rw)
Memory Range: 0xe0201000-0xe02011ff (rw,non-prefetchable)
Memory Range: 0xe0202000-0xe02020ff (rw,non-prefetchable)
IRQ: 17 (1194 events)
Module Alias: "pci:v00008086d000024C5sv0000414Csd00004760bc04sc01i00"
Driver Info #0:
Driver Status: snd_intel8x0 is active
Driver Activation Cmd: "modprobe snd_intel8x0"
Config Status: cfg=new, avail=yes, need=no, active=unknown
23: PCI 10c.0: 0401 Multimedia audio controller
[Created at pci.318]
Unique ID: QXTf.xYTb7b16KUD
Parent ID: 6NW+.ccU5FZC1tz2
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:0c.0
SysFS BusID: 0000:01:0c.0
Hardware Class: sound
Model: "Xilinx RME Hammerfall DSP"
Vendor: pci 0x10ee "Xilinx Corporation"
Device: pci 0x3fc5 "RME Hammerfall DSP"
Revision: 0x9a
Memory Range: 0xe0020000-0xe002ffff (rw,non-prefetchable)
IRQ: 16 (2640 events)
Module Alias: "pci:v000010EEd00003FC5sv00000000sd00000000bc04sc01i00"
Driver Info #0:
Driver Status: snd_hdsp is active
Driver Activation Cmd: "modprobe snd_hdsp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
Laut dieser Ausgabe ist ja sogar der Treiber schon geladen.
Nur leider kann ich ihn unter Sound Preferences nicht auswählen.
In der Liste unter Hardware gibt es nur den Eintrag für meinen onboard-Sound.
auch habe ich versucht den alsa-Treiber neu zu laden. Mein Command hier für war: sudo alsa reload
dabei bekomme ich diese Ausgabe:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/oehlrich9/.gvfs
Output information may be incomplete.
Unloading ALSA sound driver modules: snd-hdsp snd-seq-midi snd-seq-midi-event snd-seq snd-rawmidi snd-seq-device snd-hwdep snd-intel8x0 snd-ac97-codec snd-pcm snd-page-alloc snd-timer.
Loading ALSA sound driver modules: snd-hdsp snd-seq-midi snd-seq-midi-event snd-seq snd-rawmidi snd-seq-device snd-hwdep snd-intel8x0 snd-ac97-codec snd-pcm snd-page-alloc snd-timer
Ich hoffe ihr könnte damit irgendwas anfangen.
lg
Oheli