A
aussengelaender
Foren As
Hey yeah allerseits,
ich probiere gerade nen HP pavilion ze4900 mit nem ubuntu 10.04 stabil zum laufen zu bekommen. Zuvor hatte ich ein Ubuntu 11.10 mit unity auf diesem geraet, da ich dachte das dies bei aelteren Systemen gnome2 verwendet. Da es aber doch mit unity bereit stand waren die 512 mb ram entwas unterdimensioniert. Darauf bin ich auf 10.04 umgestiegen was aber erhebliche Probleme mit dem Grafiktreiber hat. Nun habe ich hier den Kernel von 11.10 installiert und es ist mir moeglich als root X zu starten. Ein weiteres Problem ist, das ich den dbus jedes mal mit
starten muss. Um Programme auf der grafischen Oberflaeche zu starten.
hier mal dmesg:
hier mein boot.log
hierbei zu beachten init dbus ... ^^
Xorg.0.log :
Da ich mir nicht total klar bin was die aufgabe des dbus ist, aber meine vermutung ist das es falsch konfiguriert (warscheinlich configured fuer den alten kernel) ist und deshalb rumspackt.
Falls ihr ne idee habt ,was es sein koennte, lasst es mich wissen. Ansonsten wird meine Mitbewohnerin sauer^^
ich probiere gerade nen HP pavilion ze4900 mit nem ubuntu 10.04 stabil zum laufen zu bekommen. Zuvor hatte ich ein Ubuntu 11.10 mit unity auf diesem geraet, da ich dachte das dies bei aelteren Systemen gnome2 verwendet. Da es aber doch mit unity bereit stand waren die 512 mb ram entwas unterdimensioniert. Darauf bin ich auf 10.04 umgestiegen was aber erhebliche Probleme mit dem Grafiktreiber hat. Nun habe ich hier den Kernel von 11.10 installiert und es ist mir moeglich als root X zu starten. Ein weiteres Problem ist, das ich den dbus jedes mal mit
Code:
dbus-daemon --systemstarten muss. Um Programme auf der grafischen Oberflaeche zu starten.
hier mal dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-14-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #23~lucid1-Ubuntu SMP Thu Dec 8 13:06:17 UTC 2011 (Ubuntu 3.0.0-14.23~lucid1-generic 3.0.9)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
[ 0.000000] BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard hp pavilion ze4900 (PQ841EA#ABD) /3084, BIOS F.10 08/18/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1dee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01DF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 01E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 479MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 480MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 479M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 479MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 480MB, range: 32MB, type UC
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001dee0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001dc00000 page 2M
[ 0.000000] 001dc00000 - 001dee0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1dee0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 15efc000 - 16768000
[ 0.000000] ACPI: RSDP 000f6560 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 1dee685b 0002C (v01 HP 3084 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1deebed2 00074 (v01 HP 3084 06040000 PTL 00000050)
[ 0.000000] ACPI: DSDT 1dee6c96 0523C (v01 HP 3084 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1defcfc0 00040
[ 0.000000] ACPI: BOOT 1deebfd8 00028 (v01 HP 3084 06040000 LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 478MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1dee0000
[ 0.000000] low ram: 0 - 1dee0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001dee0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001dee0
[ 0.000000] On node 0 totalpages: 122479
[ 0.000000] free_area_init_node: node 0, pgdat c17a92c0, node_mem_map ddb1f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 926 pages used for memmap
[ 0.000000] Normal zone: 117570 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:df800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @dd400000 s26176 r0 d22976 u4194304
[ 0.000000] pcpu-alloc: s26176 r0 d22976 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121521
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=f084b3b6-07d0-4e7d-8cbc-06278927acbb ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1961216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 465568k/490368k available (5299k kernel code, 24348k reserved, 2582k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xde6e0000 - 0xff7fe000 ( 529 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xddee0000 ( 478 MB)
[ 0.000000] .init : 0xc17b3000 - 0xc1861000 ( 696 kB)
[ 0.000000] .data : 0xc152cd2d - 0xc17b2600 (2582 kB)
[ 0.000000] .text : 0xc1000000 - 0xc152cd2d (5299 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=dd006000 soft=dd008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1496.247 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.49 BogoMIPS (lpj=5984988)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004042] Security Framework initialized
[ 0.004075] AppArmor: AppArmor initialized
[ 0.004078] Yama: becoming mindful.
[ 0.004171] Mount-cache hash table entries: 512
[ 0.008136] Initializing cgroup subsys cpuacct
[ 0.008145] Initializing cgroup subsys memory
[ 0.008160] Initializing cgroup subsys devices
[ 0.008163] Initializing cgroup subsys freezer
[ 0.008167] Initializing cgroup subsys net_cls
[ 0.008171] Initializing cgroup subsys blkio
[ 0.008183] Initializing cgroup subsys perf_event
[ 0.008231] mce: CPU supports 5 MCE banks
[ 0.008545] SMP alternatives: switching to UP code
[ 0.019264] Freeing SMP alternatives: 24k freed
[ 0.019284] ACPI: Core revision 20110413
[ 0.022717] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.024025] ftrace: allocating 23546 entries in 47 pages
[ 0.028151] weird, boot CPU (#0) not listed by the BIOS.
[ 0.028158] SMP motherboard not detected.
[ 0.028162] Local APIC not detected. Using dummy APIC emulation.
[ 0.028165] SMP disabled
[ 0.028168] Performance Events:
[ 0.028172] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.028175] no hardware sampling interrupt available.
[ 0.028179] p6 PMU driver.
[ 0.028188] ... version: 0
[ 0.028191] ... bit width: 32
[ 0.028193] ... generic registers: 2
[ 0.028196] ... value mask: 00000000ffffffff
[ 0.028199] ... max period: 000000007fffffff
[ 0.028201] ... fixed-purpose events: 0
[ 0.028204] ... event mask: 0000000000000003
[ 0.028480] Brought up 1 CPUs
[ 0.028486] Total of 1 processors activated (2992.49 BogoMIPS).
[ 0.028740] devtmpfs: initialized
[ 0.032186] PM: Registering ACPI NVS region at 1deec000 (81920 bytes)
[ 0.036741] print_constraints: dummy:
[ 0.036768] Time: 21:13:40 Date: 01/11/12
[ 0.036846] NET: Registered protocol family 16
[ 0.037031] EISA bus registered
[ 0.037049] ACPI: bus type pci registered
[ 0.038359] PCI: PCI BIOS revision 2.10 entry at 0xfd9a2, last bus=2
[ 0.038362] PCI: Using configuration type 1 for base access
[ 0.039973] bio: create slab <bio-0> at 0
[ 0.041409] ACPI: EC: Look up EC in DSDT
[ 0.044169] ACPI: Interpreter enabled
[ 0.044180] ACPI: (supports S0 S3 S4 S5)
[ 0.044209] ACPI: Using PIC for interrupt routing
[ 0.048411] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.056502] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.056685] ACPI: No dock devices found.
[ 0.056688] HEST: Table not found.
[ 0.056696] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.057203] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.058175] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.058180] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.058185] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.058190] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.058194] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.058198] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.058203] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.058220] pci 0000:00:00.0: [8086:3580] type 0 class 0x000600
[ 0.058269] pci 0000:00:00.1: [8086:3584] type 0 class 0x000880
[ 0.058314] pci 0000:00:00.3: [8086:3585] type 0 class 0x000880
[ 0.058364] pci 0000:00:02.0: [8086:3582] type 0 class 0x000300
[ 0.058377] pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.058385] pci 0000:00:02.0: reg 14: [mem 0xe0000000-0xe007ffff]
[ 0.058393] pci 0000:00:02.0: reg 18: [io 0x1800-0x1807]
[ 0.058422] pci 0000:00:02.0: supports D1
[ 0.058438] pci 0000:00:02.1: [8086:3582] type 0 class 0x000380
[ 0.058449] pci 0000:00:02.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.058457] pci 0000:00:02.1: reg 14: [mem 0xe0080000-0xe00fffff]
[ 0.058490] pci 0000:00:02.1: supports D1
[ 0.058536] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.058579] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.058612] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.058656] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.058688] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.058732] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.058775] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.058797] pci 0000:00:1d.7: reg 10: [mem 0xe0100000-0xe01003ff]
[ 0.058874] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.058881] pci 0000:00:1d.7: PME# disabled
[ 0.058899] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.058940] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[ 0.059005] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.059012] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO
[ 0.059028] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[ 0.059042] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.059053] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.059064] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.059075] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.059086] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.059097] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.059127] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.059170] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.059206] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.059222] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff]
[ 0.059232] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff]
[ 0.059243] pci 0000:00:1f.5: reg 18: [mem 0xe0100c00-0xe0100dff]
[ 0.059253] pci 0000:00:1f.5: reg 1c: [mem 0xe0100800-0xe01008ff]
[ 0.059290] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.059295] pci 0000:00:1f.5: PME# disabled
[ 0.059312] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[ 0.059328] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff]
[ 0.059338] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f]
[ 0.059388] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.059393] pci 0000:00:1f.6: PME# disabled
[ 0.059423] pci 0000:02:00.0: [10ec:8139] type 0 class 0x000200
[ 0.059440] pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.059451] pci 0000:02:00.0: reg 14: [mem 0xe0202000-0xe02020ff]
[ 0.059503] pci 0000:02:00.0: supports D1 D2
[ 0.059506] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.059512] pci 0000:02:00.0: PME# disabled
[ 0.059534] pci 0000:02:05.0: [104c:ac50] type 2 class 0x000607
[ 0.059552] pci 0000:02:05.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.059570] pci 0000:02:05.0: supports D1 D2
[ 0.059574] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.059579] pci 0000:02:05.0: PME# disabled
[ 0.059594] pci 0000:02:06.0: [14e4:4320] type 0 class 0x000280
[ 0.059608] pci 0000:02:06.0: reg 10: [mem 0xe0200000-0xe0201fff]
[ 0.059682] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.059690] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.059696] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.059702] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.059706] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.059711] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.059747] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[ 0.059758] pci_bus 0000:00: on NUMA node 0
[ 0.059763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.059933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.060173] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.063832] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.063909] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.063981] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
[ 0.064076] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.064149] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.064223] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 0.064297] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
[ 0.064378] ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
[ 0.064534] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.064547] vgaarb: loaded
[ 0.064549] vgaarb: bridge control possible 0000:00:02.0
[ 0.064912] SCSI subsystem initialized
[ 0.065026] libata version 3.00 loaded.
[ 0.065100] usbcore: registered new interface driver usbfs
[ 0.065122] usbcore: registered new interface driver hub
[ 0.065166] usbcore: registered new device driver usb
[ 0.065308] PCI: Using ACPI for IRQ routing
[ 0.065342] PCI: pci_cache_line_size set to 64 bytes
[ 0.065415] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.065420] reserve RAM buffer: 000000001dee0000 - 000000001fffffff
[ 0.065584] NetLabel: Initializing
[ 0.065587] NetLabel: domain hash size = 128
[ 0.065590] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.065610] NetLabel: unlabeled traffic allowed by default
[ 0.065694] Switching to clocksource pit
[ 0.076725] AppArmor: AppArmor Filesystem Enabled
[ 0.076788] pnp: PnP ACPI init
[ 0.076822] ACPI: bus type pnp registered
[ 0.078161] pnp 00:00: [bus 00-ff]
[ 0.078167] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.078172] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.078176] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.078180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.078184] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.078188] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.078191] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.078195] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.078199] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.078203] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.078207] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.078211] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.078215] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.078218] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.078222] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.078226] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.078230] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.078234] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[ 0.078238] pnp 00:00: [mem 0x00000000 window]
[ 0.078386] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.078628] pnp 00:01: [io 0x0070-0x0077]
[ 0.078634] pnp 00:01: [irq 8]
[ 0.078683] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.078697] pnp 00:02: [io 0x00f0]
[ 0.078701] pnp 00:02: [irq 13]
[ 0.078745] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.078761] pnp 00:03: [io 0x0000-0x001f]
[ 0.078765] pnp 00:03: [io 0x0081-0x008f]
[ 0.078775] pnp 00:03: [io 0x0090-0x0091]
[ 0.078779] pnp 00:03: [io 0x0093-0x009f]
[ 0.078782] pnp 00:03: [io 0x00c0-0x00df]
[ 0.078786] pnp 00:03: [dma 4]
[ 0.078829] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.078849] pnp 00:04: [io 0x002e-0x002f]
[ 0.078852] pnp 00:04: [io 0x004e-0x004f]
[ 0.078855] pnp 00:04: [io 0x0068]
[ 0.078858] pnp 00:04: [io 0x006c]
[ 0.078861] pnp 00:04: [io 0x0061]
[ 0.078865] pnp 00:04: [io 0x0063]
[ 0.078868] pnp 00:04: [io 0x0065]
[ 0.078871] pnp 00:04: [io 0x0067]
[ 0.078874] pnp 00:04: [io 0x0080]
[ 0.078877] pnp 00:04: [io 0x0092]
[ 0.078880] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.078883] pnp 00:04: [io 0x0600-0x060f]
[ 0.078887] pnp 00:04: [io 0x0800-0x080f]
[ 0.078890] pnp 00:04: [io 0x1000-0x107f]
[ 0.078894] pnp 00:04: [io 0x1180-0x11bf]
[ 0.078897] pnp 00:04: [mem 0xfec10000-0xfec1ffff]
[ 0.078997] system 00:04: [io 0x0600-0x060f] has been reserved
[ 0.079001] system 00:04: [io 0x0800-0x080f] has been reserved
[ 0.079006] system 00:04: [io 0x1000-0x107f] has been reserved
[ 0.079010] system 00:04: [io 0x1180-0x11bf] has been reserved
[ 0.079015] system 00:04: [mem 0xfec10000-0xfec1ffff] has been reserved
[ 0.079021] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.079254] pnp 00:05: [io 0x0060]
[ 0.079257] pnp 00:05: [io 0x0064]
[ 0.079261] pnp 00:05: [irq 1]
[ 0.079321] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.079362] pnp 00:06: [irq 12]
[ 0.079424] pnp 00:06: Plug and Play ACPI device, IDs SYN0117 SYN0100 SYN0002 PNP0f13 (active)
[ 0.079487] pnp: PnP ACPI: found 7 devices
[ 0.079490] ACPI: ACPI bus type pnp unregistered
[ 0.079496] PnPBIOS: Disabled by ACPI PNP
[ 0.116608] Switching to clocksource acpi_pm
[ 0.116658] PCI: max bus depth: 2 pci_try_num: 3
[ 0.116692] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.116698] pci 0000:00:1f.1: BAR 5: assigned [mem 0x24000000-0x240003ff]
[ 0.116708] pci 0000:00:1f.1: BAR 5: set to [mem 0x24000000-0x240003ff] (PCI address [0x24000000-0x240003ff])
[ 0.116715] pci 0000:02:05.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.116722] pci 0000:02:05.0: BAR 16: assigned [mem 0x28000000-0x2bffffff]
[ 0.116726] pci 0000:02:05.0: BAR 0: assigned [mem 0xe0203000-0xe0203fff]
[ 0.116733] pci 0000:02:05.0: BAR 0: set to [mem 0xe0203000-0xe0203fff] (PCI address [0xe0203000-0xe0203fff])
[ 0.116738] pci 0000:02:05.0: BAR 13: assigned [io 0x3400-0x34ff]
[ 0.116742] pci 0000:02:05.0: BAR 14: assigned [io 0x3800-0x38ff]
[ 0.116747] pci 0000:02:05.0: CardBus bridge to [bus 03-06]
[ 0.116751] pci 0000:02:05.0: bridge window [io 0x3400-0x34ff]
[ 0.116756] pci 0000:02:05.0: bridge window [io 0x3800-0x38ff]
[ 0.116762] pci 0000:02:05.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.116769] pci 0000:02:05.0: bridge window [mem 0x28000000-0x2bffffff]
[ 0.116775] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.116780] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
[ 0.116787] pci 0000:00:1e.0: bridge window [mem 0xe0200000-0xe02fffff]
[ 0.116793] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.116813] pci 0000:00:1e.0: setting latency timer to 64
[ 0.116976] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 0.116981] PCI: setting IRQ 11 as level-triggered
[ 0.116988] pci 0000:02:05.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 0.116996] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.117000] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.117004] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.117008] pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff]
[ 0.117013] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.117017] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.117021] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.117025] pci_bus 0000:03: resource 0 [io 0x3400-0x34ff]
[ 0.117029] pci_bus 0000:03: resource 1 [io 0x3800-0x38ff]
[ 0.117033] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.117037] pci_bus 0000:03: resource 3 [mem 0x28000000-0x2bffffff]
[ 0.117112] NET: Registered protocol family 2
[ 0.117221] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.117538] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.117673] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.117814] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.117818] TCP reno registered
[ 0.117822] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.117834] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.117991] NET: Registered protocol family 1
[ 0.118031] pci 0000:00:02.0: Boot video device
[ 0.118131] PCI: CLS 0 bytes, default 64
[ 0.118245] Simple Boot Flag at 0x36 set to 0x1
[ 0.118327] Switched to NOHz mode on CPU #0
[ 0.118743] audit: initializing netlink socket (disabled)
[ 0.118764] type=2000 audit(1326316420.116:1): initialized
[ 0.156571] Trying to unpack rootfs image as initramfs...
[ 0.202848] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.212733] VFS: Disk quotas dquot_6.5.2
[ 0.212864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.214198] fuse init (API version 7.16)
[ 0.214380] msgmni has been set to 909
[ 0.224634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.224706] io scheduler noop registered
[ 0.224709] io scheduler deadline registered
[ 0.224751] io scheduler cfq registered (default)
[ 0.224987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.225025] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.225544] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.226352] ACPI: AC Adapter [ACAD] (on-line)
[ 0.226482] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.226520] ACPI: Lid Switch [LID0]
[ 0.226589] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.226597] ACPI: Power Button [PWRB]
[ 0.226667] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.226672] ACPI: Power Button [PWRF]
[ 0.226704] ACPI: acpi_idle registered with cpuidle
[ 0.226743] Marking TSC unstable due to TSC halts in idle
[ 0.236413] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.236420] ACPI: Thermal Zone [THRM] (53 C)
[ 0.236482] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.236610] ERST: Table is not found!
[ 0.236796] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.238847] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.238852] PCI: setting IRQ 5 as level-triggered
[ 0.238860] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.238870] serial 0000:00:1f.6: PCI INT B disabled
[ 0.239093] Linux agpgart interface v0.103
[ 0.239175] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 0.239202] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 0.239392] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.239573] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.240224] isapnp: Scanning for PnP cards...
[ 0.290910] brd: module loaded
[ 0.291856] loop: module loaded
[ 0.296795] ata_piix 0000:00:1f.1: version 2.13
[ 0.296817] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.296970] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.296977] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.297035] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.297622] scsi0 : ata_piix
[ 0.297987] scsi1 : ata_piix
[ 0.299631] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.299636] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.301978] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.302612] Fixed MDIO Bus: probed
[ 0.302655] PPP generic driver version 2.4.2
[ 0.302776] tun: Universal TUN/TAP device driver, 1.6
[ 0.302779] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.302928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.303110] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.303119] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.303142] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.303148] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.303221] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.303262] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.307136] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.312400] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
[ 0.328183] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.328508] hub 1-0:1.0: USB hub found
[ 0.328517] hub 1-0:1.0: 6 ports detected
[ 0.328647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.328678] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.328964] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.328969] PCI: setting IRQ 10 as level-triggered
[ 0.328976] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.328991] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.328996] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.329096] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.329134] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
[ 0.329353] hub 2-0:1.0: USB hub found
[ 0.329360] hub 2-0:1.0: 2 ports detected
[ 0.329575] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.329581] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.329590] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.329595] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.329659] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.329690] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 0.329885] hub 3-0:1.0: USB hub found
[ 0.329891] hub 3-0:1.0: 2 ports detected
[ 0.329979] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.329988] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.329993] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.330055] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.330081] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[ 0.330275] hub 4-0:1.0: USB hub found
[ 0.330281] hub 4-0:1.0: 2 ports detected
[ 0.330442] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 0.336934] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.336950] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.337248] mousedev: PS/2 mouse device common for all mice
[ 0.337518] rtc_cmos 00:01: RTC can wake from S4
[ 0.337643] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.337665] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 0.337898] device-mapper: uevent: version 1.0.3
[ 0.338042] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.338101] EISA: Probing bus 0 at eisa.0
[ 0.338110] Cannot allocate resource for EISA slot 1
[ 0.338115] Cannot allocate resource for EISA slot 2
[ 0.338118] Cannot allocate resource for EISA slot 3
[ 0.338140] EISA: Detected 0 cards.
[ 0.338158] cpufreq-nforce2: No nForce2 chipset.
[ 0.338201] cpuidle: using governor ladder
[ 0.338260] cpuidle: using governor menu
[ 0.338263] EFI Variables Facility v0.08 2004-May-17
[ 0.338733] TCP cubic registered
[ 0.338986] NET: Registered protocol family 10
[ 0.339934] NET: Registered protocol family 17
[ 0.339968] Registering the dns_resolver key type
[ 0.340000] Using IPI No-Shortcut mode
[ 0.344430] PM: Hibernation image not present or could not be loaded.
[ 0.344461] registered taskstats version 1
[ 0.573030] ata2.00: ATAPI: DV-W24EW, C.0D, max MWDMA2
[ 0.579159] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.640474] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
[ 0.640480] ata1.00: 488397168 sectors, multi 16: LBA48
[ 0.640591] ata2.00: configured for MWDMA2
[ 0.688385] ata1.00: configured for UDMA/100
[ 0.736047] isapnp: No Plug & Play device found
[ 0.736308] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
[ 0.736644] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.736895] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.736971] sd 0:0:0:0: [sda] Write Protect is off
[ 0.736976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.737008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.751441] sda: sda1 sda2 sda3
[ 0.752075] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.816973] scsi 1:0:0:0: CD-ROM TEAC DV-W24EW C.0D PQ: 0 ANSI: 5
[ 0.902598] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.902606] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.902866] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.903018] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.929544] Freeing initrd memory: 8624k freed
[ 0.950235] Magic number: 12:191:247
[ 0.950407] rtc_cmos 00:01: setting system clock to 2012-01-11 21:13:41 UTC (1326316421)
[ 0.950435] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.950438] EDD information not available.
[ 0.950625] Freeing unused kernel memory: 696k freed
[ 0.951158] Write protecting the kernel text: 5300k
[ 0.951217] Write protecting the kernel read-only data: 2180k
[ 0.980555] udev: starting version 151
[ 0.980661] udevd (79): /proc/79/oom_adj is deprecated, please use /proc/79/oom_score_adj instead.
[ 1.276154] ACPI: Battery Slot [BAT0] (battery present)
[ 1.458861] b43-pci-bridge 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 1.458899] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 1.458906] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 1.458913] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 1.458919] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 1.458926] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 1.481828] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.496696] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.510077] ssb: Sonics Silicon Backplane found on PCI device 0000:02:06.0
[ 1.510110] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.511014] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.511077] 8139too 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 1.524624] 8139too 0000:02:00.0: eth0: RealTek RTL8139 at 0x3000, 00:c0:9f:5d:c6:ce, IRQ 10
[ 8.362793] Adding 976892k swap on /dev/sda3. Priority:-1 extents:1 across:976892k
[ 8.422748] udev: starting version 151
[ 8.587893] lp: driver loaded but no devices found
[ 8.681241] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 8.681642] acpi device:04: registered as cooling_device1
[ 8.681817] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 8.693941] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 8.873796] intel_rng: FWH not detected
[ 8.922544] wmi: Mapper loaded
[ 8.934448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.094839] [drm] Initialized drm 1.1.0 20060810
[ 9.196916] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.241005] type=1400 audit(1326316429.786:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=408 comm="apparmor_parser"
[ 9.241904] type=1400 audit(1326316429.786:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=408 comm="apparmor_parser"
[ 9.242420] type=1400 audit(1326316429.786:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=408 comm="apparmor_parser"
[ 9.245256] type=1400 audit(1326316429.790:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=420 comm="apparmor_parser"
[ 9.246161] type=1400 audit(1326316429.790:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
[ 9.246677] type=1400 audit(1326316429.790:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
[ 9.370862] cfg80211: Calling CRDA to update world regulatory domain
[ 9.381665] yenta_cardbus 0000:02:05.0: CardBus bridge found [103c:3084]
[ 9.381684] yenta_cardbus 0000:02:05.0: Using CSCINT to route CSC interrupts to PCI
[ 9.381689] yenta_cardbus 0000:02:05.0: Routing CardBus interrupts to PCI
[ 9.381695] yenta_cardbus 0000:02:05.0: TI: mfunc 0x01111112, devctl 0x64
[ 9.550089] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 9.550099] i915 0000:00:02.0: setting latency timer to 64
[ 9.572629] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.572634] [drm] Driver supports precise vblank timestamp query.
[ 9.572819] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.647356] yenta_cardbus 0000:02:05.0: ISA IRQ mask 0x00d8, PCI irq 11
[ 9.647363] yenta_cardbus 0000:02:05.0: Socket status: 30000006
[ 9.647370] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 9.647385] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 9.647391] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
[ 9.654142] cfg80211: World regulatory domain updated:
[ 9.654149] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.654154] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.654158] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.654163] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.654167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.654171] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.665611]
[ 9.665624] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe02fffff]
[ 9.665632] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
[ 9.665649] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[ 9.665654] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
[ 9.669422] fixme: max PWM is zero.
[ 9.780253] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0
[ 9.803481] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 9.815743] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 9.848352] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848359] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848364] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848368] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848372] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848377] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848380] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848385] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848389] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848393] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848397] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848401] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848405] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848410] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848413] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848418] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848422] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848426] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848430] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848434] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848438] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848443] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848447] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848451] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848455] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848459] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.848463] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 9.848468] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.882309] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 9.883974] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 9.884732] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 9.885332] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 9.885989] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[ 9.886067] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 9.886141] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 9.886219] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 9.966946] [drm] initialized overlay support
[ 10.099435] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.110399] Registered led device: b43-phy0::tx
[ 10.110739] Registered led device: b43-phy0::rx
[ 10.111038] Registered led device: b43-phy0::radio
[ 10.111274] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
[ 10.125330] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.181973] fbcon: inteldrmfb (fb0) is primary device
[ 10.289875] Console: switching to colour frame buffer device 128x48
[ 10.295277] fb0: inteldrmfb frame buffer device
[ 10.295280] drm: registered panic notifier
[ 10.345177] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.417463] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 10.417500] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.466637] type=1400 audit(1326316431.010:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=585 comm="apparmor_parser"
[ 10.475387] type=1400 audit(1326316431.018:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=586 comm="apparmor_parser"
[ 10.485470] type=1400 audit(1326316431.030:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
[ 10.486001] type=1400 audit(1326316431.030:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
[ 10.736099] intel8x0_measure_ac97_clock: measured 53419 usecs (2574 samples)
[ 10.736106] intel8x0: clocking to 48000
[ 10.977947] ppdev: user-space parallel port driver
[ 317.080837] 8139too 0000:02:00.0: eth0: link down
[ 317.080930] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 317.344051] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 317.428174] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 332.652235] wlan0: deauthenticating from 00:1c:f0:f7:ec:91 by local choice (reason=3)
[ 332.652901] wlan0: authenticate with 00:1c:f0:f7:ec:91 (try 1)
[ 332.656526] wlan0: authenticated
[ 332.656916] wlan0: associate with 00:1c:f0:f7:ec:91 (try 1)
[ 332.659740] wlan0: RX AssocResp from 00:1c:f0:f7:ec:91 (capab=0x431 status=0 aid=2)
[ 332.659747] wlan0: associated
[ 332.668772] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 343.048037] wlan0: no IPv6 routers present
[ 519.969484] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 1534.177182] [drm:i915_gem_mmap_gtt] *ERROR* Attempting to mmap a purgeable buffer
[ 1534.192252] [drm:i915_gem_mmap_gtt] *ERROR* Attempting to mmap a purgeable bufferhier mein boot.log
hierbei zu beachten init dbus ... ^^
Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
/dev/sda1: sauber, 167561/1921360 Dateien, 826439/7678720 Blöcke
/dev/sda2: sauber, 381/13287424 Dateien, 887707/53126400 Blöcke
init: dbus pre-start process (535) terminated with status 1
* Starting AppArmor profiles [128G Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
[122G[ OK ]
* Setting sensors limits [128G
[122G[ OK ]
[33m*[39;49m Speech-dispatcher configured for user sessions
* Starting Common Unix Printing System: cupsd [128G
[122G[ OK ]
[33m*[39;49m PulseAudio configured for per-user sessions
* Enabling additional executable binary formats binfmt-support [128G
[122G[ OK ]
* Checking battery state... [128G
[122G[ OK ]Xorg.0.log :
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
Current Operating System: Linux Pusteblume 3.0.0-14-generic #23~lucid1-Ubuntu SMP Thu Dec 8 13:06:17 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=f084b3b6-07d0-4e7d-8cbc-06278927acbb ro quiet splash
Build Date: 20 October 2011 03:05:54PM
xorg-server 2:1.7.6-2ubuntu7.10 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 11 22:15:27 2012
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:3582:103c:3084 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xe0000000/524288, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:3582:103c:3084 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xe0080000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM
(--) intel(0): Chipset: "852GM/855GM"
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: QDS Model: 11 Serial#: 0
(II) intel(0): Year: 2004 Week: 51
(II) intel(0): EDID Version: 1.2
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.591 redY: 0.325 greenX: 0.314 greenY: 0.562
(II) intel(0): blueX: 0.137 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): JFN4A1P015278
(II) intel(0): QD15XL061
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004493110000000000
(II) intel(0): 330e0102801e17780a58209753509023
(II) intel(0): 1e505400000001010101010101010101
(II) intel(0): 01010101010164190040410026301888
(II) intel(0): 360030e4100000190000000f0004c02e
(II) intel(0): c00211111176c0126301000000fe004a
(II) intel(0): 464e34413150303135323738000000fe
(II) intel(0): 0051443135584c3036310a20202000bc
(II) intel(0): EDID vendor "QDS", prod id 17
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (300, 230) mm
(**) intel(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) XKB: reuse xkmfile /var/lib/xkb/server-32CF54508D1127B0F32CA64F4D9024E09F623E78.xkm
(II) config/udev: Adding input device Video Bus (/dev/input/event4)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event4"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
(II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "QDS", prod id 17
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "QDS", prod id 17
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "QDS", prod id 17
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "QDS", prod id 17
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "QDS", prod id 17
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(WW) intel(0): i830_uxa_prepare_access: bo map failed
(WW) intel(0): i830_uxa_prepare_access: bo map failedDa ich mir nicht total klar bin was die aufgabe des dbus ist, aber meine vermutung ist das es falsch konfiguriert (warscheinlich configured fuer den alten kernel) ist und deshalb rumspackt.
Falls ihr ne idee habt ,was es sein koennte, lasst es mich wissen. Ansonsten wird meine Mitbewohnerin sauer^^
