WLan: Prism54 - USB

Dieses Thema im Forum "Internet, lokale Netzwerke und Wireless Lan" wurde erstellt von thalys, 09.08.2006.

  1. thalys

    thalys Grünschnabel

    Dabei seit:
    07.08.2006
    Beiträge:
    2
    Zustimmungen:
    0
    hi
    ich habe vor mich vor längerer zeit schonmal ein bisschen mit linux beschäftigt, da ich mir wohl bald ein laptop anschaffen werde, will ich auf meinem alten pc ubuntu installieren (bzw hab ich)
    da wir in unserem haus keine kabelkanäle haben muss ich über Wlan ins inet gehen,
    ich habe einen "Siemens Gigaset 54 USB Adapter"
    ich hab schon ewig bei google und hier im Forum gesucht...

    Prism54.org treiberliste:
    USB: 083A 4521
    Name: Siemens Gigaset USB Adapter 54 (new version)
    Chip: GW3887

    im netzwerk manager wird eine wlankarte angezeigt, der kann aber keine verbindung aufbauen...

    noch ein paar sachen:

    1. eth2 wird im gnome-netzwerk manager als funkverbindung angezeigt
    2. die MAC die ifconfig eth2 ausgibt ist falsch....
    3. ich hab den neuesten kernel aus dem ubuntu archiven: 2.6.15-26
    4. manuell einstellen hab ich versucht.. irgendwann findet er sogar die richtige MAC des ap.. aber verbinden geht nicht..
    5. verschiedene USB ports hab ich getestet
    6. von der ubuntu live cd starten führt zum gleichem problem....
    sagt mir wenn noch was wichtiges fehlt.


    iwconfig eth2: (nachdem ich ESSID, channel, mode, und ap auto eingestellt hab)

    Code:
    eth2      IEEE 802.11b  ESSID:"mein wlan"
              Mode:Managed  Channel=11  Access Point: *richtige MAC*
              Sensitivity=0/200
              Link Quality:0  Signal level:0  Noise level:0
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:0   Missed beacon:0
    hab jetz irgendwo gelesen das ich eine firmware brauche.....
    hab mir auf http://www.prism54.org/newdrivers.html die version 2.5.8.0 runtergeladen... hab jetz ne datei "2.5.8.0.arm" .... die hab ich in den ordner /usr/lib/hotplug/firmware/isl3887usb_bare kopiert (stand irgendwo so)


    ich hab keine Verschlüsselung aktiviert.

    neuerdings hab ich auch irgendwie geschafft die LED vom Wlan adapter ans laufen zu bekommen, leuchtet jetz dauerthaft, fragt mich nicht wie.. vorher war die die ganze zeit aus. auf http://jbnote.free.fr/ stand das die nicht unterstützt wird.

    ok dann poste ich mal noch ein paar ausgaben:

    wenn ich nur ifconfig eingebe kommen nur eth0 und lo
    bei ifconfig eth2
    Code:
    eth2      Protokoll:Ethernet  Hardware Adresse 00:3D:B4:00:00:00
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              Kollisionen:0 Sendewarteschlangenlänge:1000
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    bei ifconfig wlan0
    Code:
    wlan0: Fehler beim Auslesen der Schnittstelleninformation: Gerät nicht gefunden
    
    iwconfig wlan0
    Code:
     wlan0     No such device
    
    lsmod | islsm
    Code:
    islsm_usb              32260  0
    islsm_device           12040  1 islsm_usb
    islsm                  37644  2 islsm_usb,islsm_device
    ieee80211softmac       29696  1 islsm
    ieee80211              37064  2 islsm,ieee80211softmac
    crc_ccitt               2304  1 islsm
    usbcore               130692  6 islsm_usb,usb_storage,usbhid,ehci_hcd,uhci_hcd
    
    /etc/init.d/networking start (nach einem stop natürlich)
    Code:
     * Configuring network interfaces... Internet Systems Consortium DHCP Client V3.0.3
    Copyright 2004-2005 Internet Systems Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/products/DHCP
    
    SIOCSIFADDR: No such device
    eth1: ERROR while getting interface flags: No such device
    eth1: ERROR while getting interface flags: No such device
    Bind socket to interface: No such device
    Failed to bring up eth1.
    Internet Systems Consortium DHCP Client V3.0.3
    Copyright 2004-2005 Internet Systems Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/products/DHCP
    
    SIOCSIFADDR: No such device
    ath0: ERROR while getting interface flags: No such device
    ath0: ERROR while getting interface flags: No such device
    Bind socket to interface: No such device
    Failed to bring up ath0.
    Internet Systems Consortium DHCP Client V3.0.3
    Copyright 2004-2005 Internet Systems Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/products/DHCP
    
    SIOCSIFADDR: No such device
    wlan0: ERROR while getting interface flags: No such device
    wlan0: ERROR while getting interface flags: No such device
    Bind socket to interface: No such device
    Failed to bring up wlan0.
    Internet Systems Consortium DHCP Client V3.0.3
    Copyright 2004-2005 Internet Systems Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/products/DHCP
    
    Listening on LPF/eth0/00:11:09:b2:6e:88
    Sending on   LPF/eth0/00:11:09:b2:6e:88
    Sending on   Socket/fallback
    DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
    DHCPOFFER from 192.168.1.2
    DHCPREQUEST on eth0 to 255.255.255.255 port 67
    DHCPACK from 192.168.1.2
    bound to 192.168.1.144 -- renewal in 281 seconds.
                                                                             [ ok ]
    
    ifconfig eth2 up
    Code:
    SIOCSIFFLAGS: Connection timed out
    dmesg:
    Code:
    [17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
    [17179569.184000] BIOS-provided physical RAM map:
    [17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [17179569.184000]  BIOS-e820: 00000000000d0000 - 00000000000da000 (reserved)
    [17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    [17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
    [17179569.184000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
    [17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [17179569.184000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    [17179569.184000] 127MB HIGHMEM available.
    [17179569.184000] 896MB LOWMEM available.
    [17179569.184000] found SMP MP-table at 000fb930
    [17179569.184000] On node 0 totalpages: 262128
    [17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
    [17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
    [17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
    [17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
    [17179569.184000] DMI 2.3 present.
    [17179569.184000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa560
    [17179569.184000] ACPI: RSDT (v001 AMIINT VIA_K8   0x00000010 MSFT 0x00000097) @ 0x3fff0000
    [17179569.184000] ACPI: FADT (v001 AMIINT VIA_K8   0x00000011 MSFT 0x00000097) @ 0x3fff0030
    [17179569.184000] ACPI: MADT (v001 AMIINT VIA_K8   0x00000009 MSFT 0x00000097) @ 0x3fff00c0
    [17179569.184000] ACPI: DSDT (v001    VIA   VIA_K8 0x00001000 MSFT 0x0100000d) @ 0x00000000
    [17179569.184000] ACPI: PM-Timer IO Port: 0x808
    [17179569.184000] ACPI: Local APIC address 0xfee00000
    [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [17179569.184000] Processor #0 15:12 APIC version 16
    [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
    [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [17179569.184000] ACPI: IRQ0 used by override.
    [17179569.184000] ACPI: IRQ2 used by override.
    [17179569.184000] ACPI: IRQ9 used by override.
    [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [17179569.184000] Using ACPI (MADT) for SMP configuration information
    [17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
    [17179569.184000] Built 1 zonelists
    [17179569.184000] Kernel command line: root=/dev/hdc5 ro quiet splash
    [17179569.184000] mapped APIC to ffffd000 (fee00000)
    [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
    [17179569.184000] Initializing CPU#0
    [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
    [17179569.184000] Detected 2200.666 MHz processor.
    [17179569.184000] Using pmtmr for high-res timesource
    [17179569.184000] Console: colour VGA+ 80x25
    [17179570.504000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [17179570.504000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179570.524000] Memory: 1028816k/1048512k available (1976k kernel code, 18936k reserved, 606k data, 288k init, 131008k highmem)
    [17179570.524000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [17179570.604000] Calibrating delay using timer specific routine.. 4405.27 BogoMIPS (lpj=8810553)
    [17179570.604000] Security Framework v1.0.0 initialized
    [17179570.604000] SELinux:  Disabled at boot.
    [17179570.604000] Mount-cache hash table entries: 512
    [17179570.604000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
    [17179570.604000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
    [17179570.604000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [17179570.604000] CPU: L2 Cache: 512K (64 bytes/line)
    [17179570.604000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
    [17179570.604000] mtrr: v2.0 (20020519)
    [17179570.604000] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
    [17179570.604000] Enabling fast FPU save and restore... done.
    [17179570.604000] Enabling unmasked SIMD FPU exception support... done.
    [17179570.604000] Checking 'hlt' instruction... OK.
    [17179570.620000] checking if image is initramfs... it is
    [17179571.068000] Freeing initrd memory: 6617k freed
    [17179571.076000] ACPI: Looking for DSDT ... not found!
    [17179571.080000] ENABLING IO-APIC IRQs
    [17179571.080000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [17179571.224000] NET: Registered protocol family 16
    [17179571.224000] EISA bus registered
    [17179571.224000] ACPI: bus type pci registered
    [17179571.224000] PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=1
    [17179571.224000] PCI: Using configuration type 1
    [17179571.224000] ACPI: Subsystem revision 20051216
    [17179571.228000] ACPI: Interpreter enabled
    [17179571.228000] ACPI: Using IOAPIC for interrupt routing
    [17179571.228000] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [17179571.228000] PCI: Probing PCI hardware (bus 00)
    [17179571.232000] Boot video device is 0000:01:00.0
    [17179571.232000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [17179571.248000] ACPI: Power Resource [URP1] (off)
    [17179571.248000] ACPI: Power Resource [URP2] (off)
    [17179571.248000] ACPI: Power Resource [FDDP] (off)
    [17179571.248000] ACPI: Power Resource [LPTP] (off)
    [17179571.252000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [17179571.252000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [17179571.252000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [17179571.252000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [17179571.252000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [17179571.252000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [17179571.252000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [17179571.252000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [17179571.252000] Linux Plug and Play Support v0.97 (c) Adam Belay
    [17179571.252000] pnp: PnP ACPI init
    [17179571.252000] pnp: PnP ACPI: found 9 devices
    [17179571.252000] PnPBIOS: Disabled by ACPI PNP
    [17179571.252000] PCI: Using ACPI for IRQ routing
    [17179571.252000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    [17179571.256000] PCI: Bridge: 0000:00:01.0
    [17179571.256000]   IO window: b000-bfff
    [17179571.256000]   MEM window: cfe00000-cfefffff
    [17179571.256000]   PREFETCH window: afd00000-cfcfffff
    [17179571.256000] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [17179571.256000] audit: initializing netlink socket (disabled)
    [17179571.256000] audit(1154783989.256:1): initialized
    [17179571.256000] highmem bounce pool size: 64 pages
    [17179571.256000] VFS: Disk quotas dquot_6.5.1
    [17179571.256000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [17179571.256000] Initializing Cryptographic API
    [17179571.256000] io scheduler noop registered
    [17179571.256000] io scheduler anticipatory registered
    [17179571.256000] io scheduler deadline registered
    [17179571.256000] io scheduler cfq registered
    [17179571.256000] isapnp: Scanning for PnP cards...
    [17179571.940000] isapnp: No Plug & Play device found
    [17179571.952000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [17179571.952000] PNP: PS/2 controller doesn't have AUX irq; using default 12
    [17179571.952000] serio: i8042 AUX port at 0x60,0x64 irq 12
    [17179571.952000] serio: i8042 KBD port at 0x60,0x64 irq 1
    [17179571.952000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    [17179571.952000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [17179571.952000] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [17179571.952000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    [17179571.952000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    [17179571.952000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [17179571.952000] mice: PS/2 mouse device common for all mice
    [17179571.952000] EISA: Probing bus 0 at eisa.0
    [17179571.952000] EISA: Detected 0 cards.
    [17179571.952000] NET: Registered protocol family 2
    [17179571.992000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
    [17179571.992000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
    [17179571.992000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    [17179571.992000] TCP: Hash tables configured (established 262144 bind 65536)
    [17179571.992000] TCP reno registered
    [17179571.992000] TCP bic registered
    [17179571.992000] NET: Registered protocol family 1
    [17179571.992000] NET: Registered protocol family 8
    [17179571.992000] NET: Registered protocol family 20
    [17179571.992000] Using IPI Shortcut mode
    [17179571.992000] ACPI wakeup devices:
    [17179571.992000] PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD  AC9  MC9 ILAN SLPB
    [17179571.992000] ACPI: (supports S0 S3 S4 S5)
    [17179571.992000] Freeing unused kernel memory: 288k freed
    [17179572.008000] input: AT Translated Set 2 keyboard as /class/input/input0
    [17179572.032000] vga16fb: initializing
    [17179572.032000] vga16fb: mapped to 0xc00a0000
    [17179572.132000] Console: switching to colour frame buffer device 80x25
    [17179572.132000] fb0: VGA16 VGA frame buffer device
    [17179573.244000] Capability LSM initialized
    [17179573.688000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
    [17179573.688000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 169
    [17179573.688000] PCI: VIA IRQ fixup for 0000:00:0f.0, from 255 to 9
    [17179573.688000] VP_IDE: chipset revision 6
    [17179573.688000] VP_IDE: not 100% native mode: will probe irqs later
    [17179573.688000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
    [17179573.688000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    [17179573.688000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
    [17179573.688000] Probing IDE interface ide0...
    [17179574.552000] hda: ATAPI DVD DUAL 16X4X12, ATAPI CD/DVD-ROM drive
    [17179575.224000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [17179575.224000] Probing IDE interface ide1...
    [17179575.640000] hdc: HDS722516VLAT20, ATA DISK drive
    [17179576.312000] ide1 at 0x170-0x177,0x376 on irq 15
    [17179576.332000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    [17179576.332000] Uniform CD-ROM driver Revision: 3.20
    [17179576.340000] hdc: max request size: 1024KiB
    [17179576.340000] hdc: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(33)
    [17179576.340000] hdc: cache flushes supported
    [17179576.344000]  hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
    [17179576.716000] usbcore: registered new driver usbfs
    [17179576.716000] usbcore: registered new driver hub
    [17179576.716000] USB Universal Host Controller Interface driver v2.3
    [17179576.716000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177
    [17179576.716000] PCI: VIA IRQ fixup for 0000:00:06.0, from 10 to 1
    [17179576.716000] uhci_hcd 0000:00:06.0: UHCI Host Controller
    [17179576.716000] uhci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
    [17179576.716000] uhci_hcd 0000:00:06.0: irq 177, io base 0x0000ec00
    [17179576.716000] hub 1-0:1.0: USB hub found
    [17179576.716000] hub 1-0:1.0: 2 ports detected
    [17179576.728000] ieee1394: Initialized config rom entry `ip1394'
    [17179576.820000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
    [17179576.820000] PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9
    [17179576.820000] uhci_hcd 0000:00:10.0: UHCI Host Controller
    [17179576.820000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    [17179576.820000] uhci_hcd 0000:00:10.0: irq 185, io base 0x0000d800
    [17179576.820000] hub 2-0:1.0: USB hub found
    [17179576.820000] hub 2-0:1.0: 2 ports detected
    [17179576.820000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
    [17179576.820000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 193
    [17179576.872000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193]  MMIO=[cfffb800-cfffbfff]  Max Packet=[2048]
    [17179576.924000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
    [17179576.924000] PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 9
    [17179576.924000] uhci_hcd 0000:00:10.1: UHCI Host Controller
    [17179576.924000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    [17179576.924000] uhci_hcd 0000:00:10.1: irq 185, io base 0x0000dc00
    [17179576.924000] hub 3-0:1.0: USB hub found
    [17179576.924000] hub 3-0:1.0: 2 ports detected
    [17179577.028000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
    [17179577.028000] PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 9
    [17179577.028000] uhci_hcd 0000:00:10.2: UHCI Host Controller
    [17179577.028000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    [17179577.028000] uhci_hcd 0000:00:10.2: irq 185, io base 0x0000e000
    [17179577.028000] hub 4-0:1.0: USB hub found
    [17179577.028000] hub 4-0:1.0: 2 ports detected
    [17179577.132000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
    [17179577.132000] PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9
    [17179577.132000] uhci_hcd 0000:00:10.3: UHCI Host Controller
    [17179577.132000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
    [17179577.132000] uhci_hcd 0000:00:10.3: irq 185, io base 0x0000e400
    [17179577.132000] hub 5-0:1.0: USB hub found
    [17179577.132000] hub 5-0:1.0: 2 ports detected
    [17179577.236000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
    [17179577.236000] ehci_hcd 0000:00:10.4: EHCI Host Controller
    [17179577.236000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 6
    [17179577.236000] ehci_hcd 0000:00:10.4: irq 185, io mem 0xcffffe00
    [17179577.236000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [17179577.236000] hub 6-0:1.0: USB hub found
    [17179577.236000] hub 6-0:1.0: 8 ports detected
    [17179577.464000] Attempting manual resume
    [17179577.496000] EXT3-fs: mounted filesystem with ordered data mode.
    [17179577.512000] kjournald starting.  Commit interval 5 seconds
    [17179578.148000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc00008bb89c]
    [17179578.396000] usb 6-1: new high speed USB device using ehci_hcd and address 2
    [17179578.768000] usb 6-2: new high speed USB device using ehci_hcd and address 3
    [17179579.088000] hub 6-0:1.0: over-current change on port 5
    [17179579.192000] hub 6-0:1.0: over-current change on port 6
    [17179579.296000] hub 6-0:1.0: over-current change on port 7
    [17179579.400000] hub 6-0:1.0: over-current change on port 8
    [17179579.744000] usb 3-2: new low speed USB device using uhci_hcd and address 2[17179586.348000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [17179586.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [17179586.492000] Linux agpgart interface v0.101 (c) Dave Jones
    [17179586.500000] agpgart: Detected AGP bridge 0
    [17179586.508000] agpgart: AGP aperture is 128M @ 0xd0000000
    [17179587.124000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
    [17179587.124000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201
    [17179587.128000] eth0: VIA Rhine II at 0x1d000, 00:11:09:b2:6e:88, IRQ 201.
    [17179587.128000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
    [17179587.176000] Real Time Clock Driver v1.12
    [17179587.232000] input: PC Speaker as /class/input/input1
    [17179587.276000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
    [17179587.276000] PCI: Setting latency timer of device 0000:00:11.5 to 64
    [17179587.332000] SCSI subsystem initialized
    [17179587.344000] parport: PnPBIOS parport detected.
    [17179587.344000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    [17179587.380000] ieee80211_crypt: registered algorithm 'NULL'
    [17179587.380000] ieee80211: 802.11 data/management/control stack, git-1.1.7
    [17179587.380000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    [17179587.400000] Initializing USB Mass Storage driver...
    [17179587.400000] scsi0 : SCSI emulation for USB Mass Storage devices
    [17179587.400000] usb-storage: device found at 2
    [17179587.400000] usb-storage: waiting for device to settle before scanning
    [17179587.400000] usbcore: registered new driver usb-storage
    [17179587.400000] USB Mass Storage support registered.
    [17179587.404000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    [17179587.476000] islusb: No suitable configuration found, trying 3887 support
    [17179587.476000] usbcore: registered new driver islusb
    [17179587.556000] usbcore: registered new driver hiddev
    [17179587.576000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
    [17179587.576000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2
    [17179587.576000] usbcore: registered new driver usbhid
    [17179587.576000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    [17179587.596000] ts: Compaq touchscreen protocol output
    [17179588.292000] NET: Registered protocol family 10
    [17179588.484000] lo: Disabled Privacy Extensions
    [17179588.484000] ADDRCONF(NETDEV_UP): eth2: link is not ready
    [17179588.484000] IPv6 over IPv4 tunneling driver
    [17179590.240000] floppy0: no floppy controllers found
    [17179590.512000] lp0: using parport0 (interrupt-driven).
    [17179590.540000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
    [17179590.540000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    [17179590.540000] ieee1394: sbp2: Try serialize_io=0 for better performance
    [17179590.596000] Adding 2562328k swap on /dev/hdc6.  Priority:-1 extents:1 across:2562328k
    [17179590.712000] EXT3 FS on hdc5, internal journal
    [17179590.840000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    [17179590.840000] md: bitmap version 4.39
    [17179591.344000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
    [17179591.956000] cdrom: open failed.
    [17179592.400000]   Vendor: SAMSUNG   Model: J1FL402423        Rev: 0-12
    [17179592.400000]   Type:   Direct-Access                      ANSI SCSI revision: 02
    [17179592.416000] usb-storage: device scan complete
    [17179592.584000] Driver 'sd' needs updating - please use bus_type methods
    [17179592.584000] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
    [17179592.584000] sda: assuming drive cache: write through
    [17179592.588000] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
    [17179592.588000] sda: assuming drive cache: write through
    [17179592.588000]  sda: sda1 < sda5 >
    [17179592.596000] sd 0:0:0:0: Attached scsi disk sda
    [17179592.612000] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [17179594.236000] NET: Registered protocol family 17
    [17179597.104000] ACPI: Power Button (FF) [PWRF]
    [17179597.108000] ACPI: Power Button (CM) [PWRB]
    [17179597.108000] ACPI: Sleep Button (CM) [SLPB]
    [17179597.184000] ibm_acpi: ec object not found
    [17179597.208000] pcc_acpi: loading...
    [17179597.656000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
    [17179597.656000] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
    [17179597.656000] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
    [17179597.656000] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
    [17179597.656000] cpu_init done, current fid 0xe, vid 0x2
    [17179598.496000] eth0: no IPv6 routers present
    [17179600.492000] [drm] Initialized drm 1.0.1 20051102
    [17179600.500000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217
    [17179600.500000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
    [17179601.108000] ppdev: user-space parallel port driver
    [17179601.400000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [17179601.400000] apm: overridden by ACPI.
    [17179601.580000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    [17179601.580000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
    [17179601.580000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
    [17179601.904000] [drm] Setting GART location based on new memory map
    [17179601.904000] [drm] Loading R300 Microcode
    [17179601.908000] [drm] writeback test succeeded in 1 usecs
    [17179603.852000] Bluetooth: Core ver 2.8
    [17179603.852000] NET: Registered protocol family 31
    [17179603.852000] Bluetooth: HCI device and connection manager initialized
    [17179603.852000] Bluetooth: HCI socket layer initialized
    [17179603.864000] Bluetooth: L2CAP ver 2.8
    [17179603.864000] Bluetooth: L2CAP socket layer initialized
    [17179603.880000] Bluetooth: RFCOMM socket layer initialized
    [17179603.880000] Bluetooth: RFCOMM TTY layer initialized
    [17179603.880000] Bluetooth: RFCOMM ver 1.7
    [17179617.720000] NTFS driver 2.1.25 [Flags: R/O MODULE].
    [17179617.732000] NTFS-fs warning (device sda5): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
    [17179617.860000] NTFS volume version 3.1.
    
    dmesg nach usb adapter rausnehmen und wieder einstecken:
    Code:
    [17179831.356000] usb 6-2: USB disconnect, address 3
    [17179834.116000] usb 6-2: new high speed USB device using ehci_hcd and address 5
    [17179834.252000] islusb: No suitable configuration found, trying 3887 support
    [17179835.408000] ADDRCONF(NETDEV_UP): eth2: link is not ready
    
    danke im voraus
    thalys
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
Thema:

WLan: Prism54 - USB

Die Seite wird geladen...

WLan: Prism54 - USB - Ähnliche Themen

  1. Ein HowTo für Wlan Prism54 PCMCIA unter Debian wär Super

    Ein HowTo für Wlan Prism54 PCMCIA unter Debian wär Super: Ein HowTo für Wlan Prism54 PCMCIA unter Debian wär Super. Ich selbst würde gerne mein Notebook ans Netz bringen. Habe eine Netgear WG511 mit...
  2. Problem mit "Prism54" WLAN-Card Driver

    Problem mit "Prism54" WLAN-Card Driver: [gelöst] Problem mit "Prism54" WLAN-Card Driver Hallo zusammen Gerade mal vorweg. Ich bin erst seit knapp 3 Wochen Linux User. (15 Jahre...
  3. Routing 2 Subnetze (WLAN und ETH)

    Routing 2 Subnetze (WLAN und ETH): Hallo, hoffe ich bin hier richtig. Ich habe ein Raspberry Pi welcher als WLAN-Accesspoint dient. Dabei sehen die Interfaces wie folgt aus: wlan1...
  4. Installation, aber wo hin mit dem WLAN Passwort?

    Installation, aber wo hin mit dem WLAN Passwort?: Hallo, ich hab nicht gewußt wohin mit dem Wlan-Passwort (WPA2). Dadurch habe ich MidnightBSD gefunden und da installier ich was, aber es ist...
  5. Raspberry Pi 3 mit WLAN und Bluetooth

    Raspberry Pi 3 mit WLAN und Bluetooth: Die Gerüchteküche um einen neuen Raspberry Pi köchelt schon seit einigen Monaten. Jetzt gibt es erste konkrete Hinweise, was Nutzer von dem neuen...