Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 Nvidia ) @ 0x000f73c0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7700
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount acpi=ht resume=/dev/hda7
Found and enabled local APIC!
Initializing CPU#0
Detected 1797.307 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3578.26 BogoMIPS
Memory: 514544k/524224k available (1508k kernel code, 9292k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1797.3053 MHz.
..... host bus clock speed is 266.2675 MHz.
cpu: 0, clocks: 2662675, slice: 1331337
CPU0<T0:2662672,T1:1331328,D:7,S:1331337,C:2662675>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: nVidia Corporation nForce2 IDE UDMA133 (rev a2) UDMA100 controller on pci00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdb: Maxtor 32049H2, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0180e5c, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG SV1203N, ATA DISK drive
hdd: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive
blk: queue c0181174, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(100)
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p3 < p5 p6 p7 >
/dev/ide/host0/bus0/target1/lun0: p1
/dev/ide/host0/bus1/target0/lun0: p1 < p5 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Resume Machine: This is normal swap space
Swsusp 1.0.3: kswsuspd starting
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 402k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
sym.1.7.0: setting PCI_COMMAND_PARITY...
sym0: <815> rev 0x4 on pci bus 1 device 7 function 0 irq 11
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: SCSI BUS has been reset.
spurious 8259A interrupt: IRQ7.
scsi0 : sym-2.1.17a
blk: queue c15aa474, I/O limit 4095Mb (mask 0xffffffff)
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
blk: queue c15aa374, I/O limit 4095Mb (mask 0xffffffff)
Vendor: GENERIC Model: CRD-BP4 Rev: 4.28
Type: CD-ROM ANSI SCSI revision: 02
blk: queue c15aa574, I/O limit 4095Mb (mask 0xffffffff)
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe086e000, IRQ 5
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB 1.1 OHCI Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe0870000, IRQ 10
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB 1.1 OHCI Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: nVidia Corporation nForce2 USB 2.0 EHCI Controller
ehci_hcd 00:02.2: irq 11, pci mem e0878000
usb.c: new USB bus registered, assigned bus number 3
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 32.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Adding Swap: 730916k swap-space (priority -1)
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-15
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
[url]http://www.scyld.com/network/via-rhine.html[/url]
eth0: VIA VT86C100A Rhine at 0xd400, 00:50:ba:bc:c5:80, IRQ 10.
eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 45e1.
inserting floppy driver for 2.4.22-10mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
sym0:1: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
sym0:2: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
eth0: Setting full-duplex based on MII #8 link partner capability of 45e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 Aperture @ 0xe0000000 64MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
hub.c: new USB device 00:02.2-4, assigned address 2
usb.c: USB device not accepting new address=2 (error=-71)
hub.c: new USB device 00:02.2-4, assigned address 3
usb.c: USB device not accepting new address=3 (error=-71)