nemesis@Nemesis-Mobil:~$ dmesg
um(R) M processor 2.00GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: Looking for DSDT in initrd... not found!
ACPI: setting ELCR to 0200 (from 00b0)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4260k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050125
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:09: ioport range 0x400-0x47f could not be reserved
pnp: 00:09: ioport range 0xc00-0xc0f has been reserved
pnp: 00:09: ioport range 0x500-0x53f has been reserved
pnp: 00:09: ioport range 0x4c0-0x4cf has been reserved
pnp: 00:0a: ioport range 0x540-0x55f has been reserved
audit: initializing netlink socket (disabled)
audit(1120418399.964:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
inotify device minor=63
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 5 (level, low) -> IRQ 5
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
AUDI P0P2 MODM USB1 USB2 USB3 EHCI SLPB
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4260KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
ACPI: Fan [FN00] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (58 C)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 4 (level, low) -> IRQ 4
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HTS548080M9AT00, ATA DISK drive
hdb: PIONEER DVD-RW DVR-K14AS, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (425 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 1269092k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
lp: driver loaded but no devices found
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> four buttons
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ts: Compaq touchscreen protocol output
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
Real Time Clock Driver v1.12
input: PC Speaker
irda_init()
NET: Registered protocol family 23
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 5, io base 0xe800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0xe880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 4, io base 0xec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 7, pci mem 0xffaffc00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 1-1: new low speed USB device using uhci_hcd and address 3
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
intel8x0_measure_ac97_clock: measured 49487 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:02:01.0 [1043:1844]
Yenta: ISA IRQ mask 0x0408, PCI irq 5
Socket status: 30000006
ACPI: PCI interrupt 0000:02:01.1[B] -> GSI 4 (level, low) -> IRQ 4
Yenta: CardBus bridge found at 0000:02:01.1 [1043:1844]
Yenta: ISA IRQ mask 0x0408, PCI irq 4
Socket status: 30000006
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ff9fb800-ff9fbfff] Max Packet=[2048]
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.12 loaded
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 4 (level, low) -> IRQ 4
saa7133[0]: found at 0000:02:02.0, rev: 240, irq: 4, latency: 64, mmio: 0xff9fb000
saa7133[0]: subsystem: 5168:0212, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 10400
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: i2c eeprom 00: 68 51 12 02 10 28 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
ieee80211_crypt: registered algorithm 'NULL'
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.4
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003256142]
ieee80211: eth1: Unknown management packet: 0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fb040(lo)
IPv6 over IPv4 tunneling driver
Asus Laptop ACPI Extras version 0.29
BSTS called, 0x0d returned
W1N model detected, supported
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x290-0x297 0x370-0x377 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x290-0x297 0x370-0x377 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
eth1: no IPv6 routers present
------------[ cut here ]------------
kernel BUG at <bad filename>:64129!
invalid operand: 0000 [#1]
PREEMPT
Modules linked in: speedstep_centrino cpufreq_stats freq_table cpufreq_userspace cpufreq_ondemand cpufreq_powersave pcmcia video sony_acpi pcc_acpi button battery container ac asus_acpi ipv6 ipw2200 firmware_class ieee80211 ieee80211_crypt saa7134 video_buf v4l2_common v4l1_compat i2c_core ir_common videodev ohci1394 yenta_socket rsrc_nonstatic pcmcia_core sk98lin usbhid snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc ehci_hcd uhci_hcd usbcore shpchp pci_hotplug intel_agp agpgart irtty_sir sir_dev irda crc_ccitt pcspkr rtc nls_iso8859_1 nls_cp437 vfat fat md dm_mod evdev joydev tsdev sr_mod sbp2 scsi_mod ieee1394 psmouse mousedev parport_pc lp parport ide_cd cdrom ext3 jbd ide_generic piix ide_disk ide_core unix thermal processor fan
CPU: 0
EIP: 0060:[<c01133e9>] Not tainted VLI
EFLAGS: 00010202 (2.6.11)
EIP is at sub_preempt_count+0x11/0x2f
eax: d8d24000 ebx: d8d3f108 ecx: c037f660 edx: 00000001
esi: d5b5b6a8 edi: 00000000 ebp: d8d25f10 esp: d8d25f10
ds: 007b es: 007b ss: 0068
Process gam_server (pid: 7332, threadinfo=d8d24000 task=d91da5a0)
Stack: 80045102 c01de080 ffffffe7 dac0f400 08074254 c01de116 dac0f400 00000004
00000000 00000004 d5c05500 c0159b67 ffffffe7 d93be200 08074254 c01588b5
df1559d0 d93be200 80045102 08074254 08074254 00000000 d93be200 00000003
Call Trace:
[<c01de080>] inotify_ignore+0x5f/0x78
[<c01de116>] inotify_ioctl+0x7d/0xd3
[<c0159b67>] do_pollfd+0x59/0x80
[<c01588b5>] do_ioctl+0x55/0x66
[<c0158bfb>] vfs_ioctl+0x17a/0x188
[<c0158c4f>] sys_ioctl+0x46/0x63
[<c01030c5>] sysenter_past_esp+0x52/0x75
Code: 21 e2 8b 42 14 85 c0 89 e5 79 02 0f 0b 01 c8 3c f4 89 42 14 76 02 0f 0b c9 c3 55 89 c2 b8 00 e0 ff ff 21 e0 3b 50 14 89 e5 7e 02 <0f> 0b 81 fa fe 00 00 00 77 08 80 78 14 00 75 02 0f 0b b8 00 e0