SuSE 9.1 + 4 in 1 kartenleser

Dieses Thema im Forum "Laufwerke / Speichermedien" wurde erstellt von Seban, 16.07.2004.

  1. Seban

    Seban Grünschnabel

    Dabei seit:
    16.07.2004
    Beiträge:
    1
    Zustimmungen:
    0
    Hi ich hab einen 4 in 1 internen kartenleser und würde ihn gerne mounten, es erscheinen zwei scsi geräte einmal sda1 und sdb1,wenn ich sdb1 ohne karte mounte dann kommt der Fehler: no medium found wenn ich das gerät mit karte drinnen mounte kommt: is not a valid block device.

    Was mach ich falsch?

    Kann mir jemand helfen?

    Benutze SuSE 9.1

    Vielen Dank

    Seban
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 dumdidum, 05.04.2005
    Zuletzt bearbeitet: 05.04.2005
    dumdidum

    dumdidum Jungspund

    Dabei seit:
    18.03.2005
    Beiträge:
    14
    Zustimmungen:
    0
    Hallo, habe genau das selbe Problem. Vielleicht hat schon jemand eine Lösung gefunden?

    Frage: Hab ein internen Cardreader für Speicherkarten von z.B. Sony Digitalkameras. Wie kann ich auf die Karte im Cardreader zugreifen? in /var/log/messages wird er jedoch nicht erkannt ls devices ...?

    Hier nochmal nen Auszug:
    Code:
    linux:/home/eric # dmesg
    Linux version 2.6.8-24.13-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.
    5 20040809)) #1 Fri Mar 18 10:19:42 UTC 2005
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
     BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
     BIOS-e820: 000000001ff70000 - 000000001ff79000 (ACPI data)
     BIOS-e820: 000000001ff79000 - 000000001ff80000 (ACPI NVS)
     BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
     BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
    502MB vmalloc/ioremap area available.
    0MB HIGHMEM available.
    511MB LOWMEM available.
    On node 0 totalpages: 130928
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 126832 pages, LIFO batch:16
      HighMem zone: 0 pages, LIFO batch:1
    DMI present.
    ACPI: RSDP (v000 PTLTD                                     ) @ 0x000f6a10
    ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1ff741e7
    ACPI: FADT (v001 INTEL  SPDG     0x06040000 PTL  0x00000003) @ 0x1ff78f14
    ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 0x1ff78f88
    ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1ff78fd8
    ACPI: DSDT (v001   WIST      K2P 0x06040000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: local apic disabled
    Built 1 zonelists
    Kernel command line: root=/dev/hda3 vga=0x317 selinux=0 resume=/dev/hda4 desktop
     elevator=as splash=silent
    bootsplash: silent mode.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 2794.130 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 513484k/523712k available (2076k kernel code, 9576k reserved, 780k data,
     212k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896)
    Security Scaffold v1.0.0 initialized
    SELinux:  Disabled at boot.
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: After all inits, caps:        bfebfbff 00000000 00000000 00000080
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU0: Thermal monitoring enabled
    CPU: Intel Mobile Intel(R) Pentium(R) 4     CPU 2.80GHz stepping 09
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ACPI: Looking for DSDT in initrd... not found!
    ACPI: IRQ9 SCI: Edge set to Level Trigger.
    checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    Freeing initrd memory: 1167k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfd822, last bus=3
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040715
     exfldio-0194: *** Warning: The ACPI AML in your computer contains errors, pleas
    e nag the manufacturer to correct it.
     exfldio-0197: *** Warning: Allowing relaxed access to fields; turn on CONFIG_AC
    PI_DEBUG for details.
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11 14 15)
    ACPI: Embedded Controller [EC] (gpe 28)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    PCI: Using ACPI for IRQ routing
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
    ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    ACPI: PCI interrupt 0000:03:04.1[B] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt 0000:03:04.2[C] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
    ACPI: PCI interrupt 0000:03:04.3[D] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11 (level, low) -> IRQ 11
    TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1112691675.726:0): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 6144k, total 6553
    6k
    vesafb: mode is 1024x768x16, linelength=2048, pages=1
    vesafb: protected mode interface info at c000:f5f0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 35007 byt
    es,<6>...found (1024x768, 21643 bytes, v3).
    Console: switching to colour frame buffer device 127x43
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
    Using anticipatory io scheduler
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH5: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: IC25N060ATMR04-0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    ide2: Wait for ready failed before probe !
    Probing IDE interface ide3...
    ide3: Wait for ready failed before probe !
    Probing IDE interface ide4...
    ide4: Wait for ready failed before probe !
    Probing IDE interface ide5...
    ide5: Wait for ready failed before probe !
    hda: max request size: 1024KiB
    hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
    hda: cache flushes supported
     hda: hda1 hda2 hda3 hda4
    ide-floppy driver 0.99.newide
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    Synaptics Touchpad, model: 1
     Firmware: 5.8
     180 degree mounted touchpad
     Sensor: 18
     new absolute packet format
     Touchpad has extended capability bits
     -> 4 multi-buttons, i.e. besides standard buttons
     -> multifinger detection
     -> palm detection
    input: SynPS/2 Synaptics TouchPad on isa0060/serio4
    input: PC Speaker
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    NET: Registered protocol family 2
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    PM: Reading pmdisk image.
    swsusp: Resume From Partition: /dev/hda4
    <3>swsusp: Invalid partition type.
    pmdisk: Error -22 resuming
    PM: Resume from disk failed.
    ACPI: (supports S0 S3 S4 S5)
    ACPI wakeup devices:
    SLPB LID0 PCIB LANC MODM USB1 USB2 USB3 USB4 EUSB
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    RAMDISK: Compressed image found at block 0
    VFS: Mounted root (ext2 filesystem).
    ReiserFS: hda3: found reiserfs format "3.6" with standard journal
    ReiserFS: hda3: using ordered data mode
    reiserfs: using flush barriers
    ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,
    max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda3: checking transaction log (hda3)
    ReiserFS: hda3: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Trying to move old root to /initrd ... failed
    Unmounting old root
    Trying to free ramdisk memory ... okay
    Freeing unused kernel memory: 212k freed
    Adding 1582392k swap on /dev/hda4.  Priority:42 extents:1
    reiserfs: enabling write barrier flush mode
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 10 (level, low) -> IRQ 10
    eth0: RealTek RTL8139 at 0xe084e800, 00:0a:e4:46:6e:bb, IRQ 10
    eth0:  Identified 8139 chip type 'RTL-8101'
    NTFS driver 2.1.17 [Flags: R/O MODULE].
    NTFS volume version 3.1.
    subfs 0.9
    evdev_connect: evdev cdffc580 handle cdffc59c name event0
    evdev_connect: evdev c14d2a80 handle c14d2a9c name event1
    evdev_connect: evdev c14d2980 handle c14d299c name event2
    hw_random hardware driver 1.0.0 loaded
    Linux Kernel Card Services
      options:  [pci] [cardbus] [pm]
    ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:03:04.0 [17c0:17c0]
    Yenta: ISA IRQ mask 0x00f8, PCI irq 11
    Socket status: 30000006
    ACPI: PCI interrupt 0000:03:04.1[B] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:03:04.1 [17c0:17c0]
    Yenta: ISA IRQ mask 0x00f8, PCI irq 11
    Socket status: 30000006
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: irq 11, io base 00001cc0
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    usb usb1: Product: UHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.8-24.13-default uhci_hcd
    usb usb1: SerialNumber: 0000:00:1d.0
    Linux agpgart interface v0.100 (c) Dave Jones
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: irq 10, io base 00001ce0
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.8-24.13-default uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.1
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: irq 11, io base 00002000
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.8-24.13-default uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.2
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    usb 1-1: new full speed USB device using address 2
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: irq 11, io base 00002020
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.8-24.13-default uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.3
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    agpgart: Detected an Intel 865 Chipset.
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: AGP aperture is 128M @ 0x28000000
    usb 1-1: Product: USB2.0 Hub
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    usb 2-1: new low speed USB device using address 2
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: irq 10, pci mem e120e000
    usb 2-1: Product: Basic Optical Mouse
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    usb usb5: Product: EHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.8-24.13-default ehci_hcd
    usb usb5: SerialNumber: 0000:00:1d.7
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 8 ports detected
    usb 2-1: can't set config #1, error -71
    usb 1-1: USB disconnect, address 2
    usb 5-1: new high speed USB device using address 2
    usb 5-1: Product: USB2.0 Hub
    hub 5-1:1.0: USB hub found
    hub 5-1:1.0: 4 ports detected
    ieee1394: Initialized config rom entry `ip1394'
    ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:03:04.2[C] -> GSI 10 (level, low) -> IRQ 10
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d2007000-d20077ff]  Max
     Packet=[2048]
    Loaded prism54 driver, version 1.2
    ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11 (level, low) -> IRQ 11
    usb 2-1: new low speed USB device using address 4
    usb 2-1: Product: Basic Optical Mouse
    usb 2-1: Manufacturer: Microsoft
    hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000ae4033610200d]
    SCSI subsystem initialized
    st: Version 20040403, fixed bufsize 32768, s/g segs 256
    usbcore: registered new driver hiddev
    evdev_connect: evdev cdec4a80 handle cdec4a9c name event3
    input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    eth1: islpci_open()
    eth1: resetting device...
    eth1: uploading firmware...
    prism54: request_firmware() failed for 'isl3890'
    eth1: could not upload firmware ('isl3890')
    cs: IO port probe 0x0c00-0x0cff: clean.
    cs: IO port probe 0x0820-0x08ff: clean.
    cs: IO port probe 0x0800-0x080f: clean.
    cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f
    cs: IO port probe 0x0a00-0x0aff: clean.
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    NET: Registered protocol family 17
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c037f760(lo)
    IPv6 over IPv4 tunneling driver
    ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    intel8x0_measure_ac97_clock: measured 49390 usecs
    intel8x0: clocking to 48000
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Lid Switch [LID0]
    ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)
    ACPI: Thermal Zone [THM0] (42 C)
    cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
    powernow: This module only works with AMD K7 CPUs
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    lp0: using parport0 (polling).
    drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    usbcore: registered new driver usbserial_generic
    usbcore: registered new driver usbserial
    drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Disabled Privacy Extensions on device dd84e800(sit0)
    eth0: no IPv6 routers present
    Non-volatile memory driver v1.2
    module nvidia unsupported by SUSE/Novell, tainting kernel.
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
    NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
    agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
    agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
    bootsplash: status on console 0 changed to on
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISO 9660 Extensions: RRIP_1991A
    parport0: PC-style at 0x378 [PCSPP,TRISTATE]
    lp0: using parport0 (polling).
    ppa: Version 2.07 (for Linux 2.4.x)
    linux:/home/eric #
     
Thema:

SuSE 9.1 + 4 in 1 kartenleser

Die Seite wird geladen...

SuSE 9.1 + 4 in 1 kartenleser - Ähnliche Themen

  1. Kartenleser geht nicht unter suse 10.0

    Kartenleser geht nicht unter suse 10.0: hab nen neuen USB kartenleser von Mobile Action Technology MA800 gekauft und der geht nicht unter suse 10.0 linux.. suse zeigt diese infos an:...
  2. SD Kartenleser unter SuSE 10

    SD Kartenleser unter SuSE 10: Hallo, ich befasse mich erst seit kurzem mit Linux und habe ein kleines Problem: ich habe den Laptop X20 von Samsung mit integriertem SD -...
  3. SUSE 13.2 Bumblebee dual monitor

    SUSE 13.2 Bumblebee dual monitor: Folgendes Problem: weder am VGA noch HDMI-Ausgang ist ein Signal für den Beamer vorhanden. Rechner: Lenovo Z70 SUSE 13.2 Kernel...
  4. Suse: Tomas Di Giacomo wird neuer CTO

    Suse: Tomas Di Giacomo wird neuer CTO: Suse hat seinen Vorstand um Dr. Tomas Di Giacomo erweitert, der als Chief Technology Officer ab sofort dem Unternehmen angehört. In der neu...
  5. OpenSuse Conference vom 22. bis 26. Juni in Nürnberg

    OpenSuse Conference vom 22. bis 26. Juni in Nürnberg: Zum mittlerweile achten Mal findet die OpenSuse Conference statt. In diesem Jahr wird sie vom 22. bis 26. Juni in Nürnberg abgehalten. Der Call...