Festplatte stirbt, dd funktioniert nicht

Dieses Thema im Forum "Linux OS" wurde erstellt von BloodyMary, 22.02.2012.

  1. #1 BloodyMary, 22.02.2012
    BloodyMary

    BloodyMary Pornophon

    Dabei seit:
    15.03.2005
    Beiträge:
    615
    Zustimmungen:
    1
    Ort:
    Bayern
    Hallo Allerseits,

    meine Festplatte scheint ihren Geist auf zu geben.

    Mein System:
    Acer Travelmate 6292
    Festplatte: WDC WD6400BPVT-00HXZT0

    Archlinux, letztes pacman -Syu ca. vor einer Woche

    Partitionierung:
    /dev/sda1 /boot ext2
    /dev/sda2 swap
    /dev/sda3 / ext4

    Gestern Abend wollte ich noch schnell meine E-Mails nachschauen. Der Rechner fing mit der Standardüberprüfung von /dev/sda3 an. Die brach nach 2% ab. Die jetzt in der Ausgabe von dmesg zu sehenden wiederkehrenden Fehlermeldungen tauchten auf. Ich habe den Rechner daraufhin ausgeschaltet.
    Nach einem Neustart, gleiches Verhalten. Notkonsole tauchte auf. Manuelles mounten führte zu den gleichen meldungen.
    Heute habe ich es dann mit einem Arch Installationssystem versucht. Beim starten tauchen auch diese wiederkehrenden Meldungen auf. Allerdings hatte ich irgendwann die Gelegenheit, mich anzumelden und verschiedene Tests zu machen. Dabei tauchen immerwieder die Meldungen auf (mit der Zeit vorne weg "[700.432] Blabbakak")
    Hier meine Ergebnisse:

    dmesg
    Code:
    [...]
    [    3.172943] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [    3.216693] usb 2-2: new high speed USB device number 2 using ehci_hcd
    [    3.216808] firewire_ohci: Added fw-ohci device 0000:0a:09.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [    3.344996] Initializing USB Mass Storage driver...
    [    3.345113] scsi5 : usb-storage 2-2:1.0
    [    3.345217] usbcore: registered new interface driver usb-storage
    [    3.345219] USB Mass Storage support registered.
    [    3.446680] usb 2-3: new high speed USB device number 3 using ehci_hcd
    [    3.591827] scsi6 : usb-storage 2-3:1.0
    [    3.716753] firewire_core: created device fw0: GUID 001b24000161703e, S400
    [    4.343917] scsi 5:0:0:0: Direct-Access     takeMS   colorline        5.00 PQ: 0 ANSI: 2
    [    4.344130] sd 5:0:0:0: Attached scsi generic sg2 type 0
    [    4.344649] sd 5:0:0:0: [sdb] 3993600 512-byte logical blocks: (2.04 GB/1.90 GiB)
    [    4.345142] sd 5:0:0:0: [sdb] Write Protect is off
    [    4.345145] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
    [    4.345644] sd 5:0:0:0: [sdb] No Caching mode page present
    [    4.345696] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [    4.347640] sd 5:0:0:0: [sdb] No Caching mode page present
    [    4.347688] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [    4.348296]  sdb: sdb1
    [    4.350516] sd 5:0:0:0: [sdb] No Caching mode page present
    [    4.350567] sd 5:0:0:0: [sdb] Assuming drive cache: write through
    [    4.350616] sd 5:0:0:0: [sdb] Attached SCSI removable disk
    [    4.599038] scsi 6:0:0:0: Direct-Access     SAMSUNG  HD203WI               PQ: 0 ANSI: 2
    [    4.599268] sd 6:0:0:0: Attached scsi generic sg3 type 0
    [    4.600034] sd 6:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [    4.602268] sd 6:0:0:0: [sdc] Write Protect is off
    [    4.602272] sd 6:0:0:0: [sdc] Mode Sense: 38 00 00 00
    [    4.604517] sd 6:0:0:0: [sdc] No Caching mode page present
    [    4.604569] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    [    4.610027] sd 6:0:0:0: [sdc] No Caching mode page present
    [    4.610078] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    [    6.061201] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [    6.061252] ata1.00: irq_stat 0x40000008
    [    6.061298] ata1.00: failed command: READ FPDMA QUEUED
    [    6.061350] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [    6.061351]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [    6.061479] ata1.00: status: { DRDY ERR }
    [    6.061534] ata1.00: error: { UNC }
    [    6.069370] ata1.00: configured for UDMA/133
    [    6.069377] ata1: EH complete
    [    8.849985] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [    8.850052] ata1.00: irq_stat 0x40000008
    [    8.850108] ata1.00: failed command: READ FPDMA QUEUED
    [    8.850169] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [    8.850170]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [    8.850307] ata1.00: status: { DRDY ERR }
    [    8.850362] ata1.00: error: { UNC }
    [    8.858165] ata1.00: configured for UDMA/133
    [    8.858171] ata1: EH complete
    [   11.520680]  sdc: sdc1
    [   11.535147] sd 6:0:0:0: [sdc] No Caching mode page present
    [   11.535208] sd 6:0:0:0: [sdc] Assuming drive cache: write through
    [   11.535267] sd 6:0:0:0: [sdc] Attached SCSI disk
    [   11.650044] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   11.650106] ata1.00: irq_stat 0x40000008
    [   11.650168] ata1.00: failed command: READ FPDMA QUEUED
    [   11.650228] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   11.650230]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   11.650373] ata1.00: status: { DRDY ERR }
    [   11.650428] ata1.00: error: { UNC }
    [   11.657934] ata1.00: configured for UDMA/133
    [   11.657942] ata1: EH complete
    [   14.438953] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   14.439015] ata1.00: irq_stat 0x40000008
    [   14.439072] ata1.00: failed command: READ FPDMA QUEUED
    [   14.439133] ata1.00: cmd 60/08:10:30:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   14.439134]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   14.439272] ata1.00: status: { DRDY ERR }
    [   14.439328] ata1.00: error: { UNC }
    [   14.446791] ata1.00: configured for UDMA/133
    [   14.446799] ata1: EH complete
    [   17.216701] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   17.216761] ata1.00: irq_stat 0x40000008
    [   17.216817] ata1.00: failed command: READ FPDMA QUEUED
    [   17.216878] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   17.216879]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   17.217016] ata1.00: status: { DRDY ERR }
    [   17.217072] ata1.00: error: { UNC }
    [   17.224543] ata1.00: configured for UDMA/133
    [   17.224549] ata1: EH complete
    [   19.994361] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   19.994421] ata1.00: irq_stat 0x40000008
    [   19.994477] ata1.00: failed command: READ FPDMA QUEUED
    [   19.994537] ata1.00: cmd 60/08:10:30:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   19.994539]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   19.994676] ata1.00: status: { DRDY ERR }
    [   19.994732] ata1.00: error: { UNC }
    [   20.002246] ata1.00: configured for UDMA/133
    [   20.002257] sd 0:0:0:0: [sda] Unhandled sense code
    [   20.002259] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [   20.002263] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [   20.002267] Descriptor sense data with sense descriptors (in hex):
    [   20.002269]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [   20.002278]         00 89 46 30 
    [   20.002282] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [   20.002286] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 30 00 00 08 00
    [   20.002295] end_request: I/O error, dev sda, sector 8996400
    [   20.002354] Buffer I/O error on device sda3, logical block 0
    [   20.002413] Buffer I/O error on device sda3, logical block 1
    [   20.002471] Buffer I/O error on device sda3, logical block 2
    [   20.002529] Buffer I/O error on device sda3, logical block 3
    [   20.002587] Buffer I/O error on device sda3, logical block 4
    [   20.002645] Buffer I/O error on device sda3, logical block 5
    [   20.002703] Buffer I/O error on device sda3, logical block 6
    [   20.002761] Buffer I/O error on device sda3, logical block 7
    [   20.002826] ata1: EH complete
    [   22.783221] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   22.783281] ata1.00: irq_stat 0x40000008
    [   22.783343] ata1.00: failed command: READ FPDMA QUEUED
    [   22.783404] ata1.00: cmd 60/08:10:30:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   22.783405]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   22.783542] ata1.00: status: { DRDY ERR }
    [   22.783598] ata1.00: error: { UNC }
    [   22.791014] ata1.00: configured for UDMA/133
    [   22.791029] ata1: EH complete
    [   25.560945] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   25.561005] ata1.00: irq_stat 0x40000008
    [   25.561061] ata1.00: failed command: READ FPDMA QUEUED
    [   25.561122] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   25.561123]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   25.561261] ata1.00: status: { DRDY ERR }
    [   25.561316] ata1.00: error: { UNC }
    [   25.568774] ata1.00: configured for UDMA/133
    [   25.568789] ata1: EH complete
    [   28.338730] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   28.338790] ata1.00: irq_stat 0x40000008
    [   28.338846] ata1.00: failed command: READ FPDMA QUEUED
    [   28.338906] ata1.00: cmd 60/08:10:30:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   28.338908]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   28.339045] ata1.00: status: { DRDY ERR }
    [   28.339101] ata1.00: error: { UNC }
    [   28.346572] ata1.00: configured for UDMA/133
    [   28.346587] ata1: EH complete
    [   31.116507] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   31.116567] ata1.00: irq_stat 0x40000008
    [   31.116622] ata1.00: failed command: READ FPDMA QUEUED
    [   31.116690] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   31.116691]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   31.116829] ata1.00: status: { DRDY ERR }
    [   31.116885] ata1.00: error: { UNC }
    [   31.124313] ata1.00: configured for UDMA/133
    [   31.124328] ata1: EH complete
    [   33.894276] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   33.894336] ata1.00: irq_stat 0x40000008
    [   33.894392] ata1.00: failed command: READ FPDMA QUEUED
    [   33.894453] ata1.00: cmd 60/08:10:30:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   33.894454]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   33.894592] ata1.00: status: { DRDY ERR }
    [   33.894648] ata1.00: error: { UNC }
    [   33.902036] ata1.00: configured for UDMA/133
    [   33.902051] ata1: EH complete
    [   36.683082] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   36.683142] ata1.00: irq_stat 0x40000008
    [   36.683198] ata1.00: failed command: READ FPDMA QUEUED
    [   36.683259] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   36.683260]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   36.683403] ata1.00: status: { DRDY ERR }
    [   36.683459] ata1.00: error: { UNC }
    [   36.690870] ata1.00: configured for UDMA/133
    [   36.690877] sd 0:0:0:0: [sda] Unhandled sense code
    [   36.690880] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [   36.690883] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [   36.690887] Descriptor sense data with sense descriptors (in hex):
    [   36.690889]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [   36.690898]         00 89 46 30 
    [   36.690902] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [   36.690905] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 30 00 00 08 00
    [   36.690914] end_request: I/O error, dev sda, sector 8996400
    [   36.690973] Buffer I/O error on device sda3, logical block 0
    [   36.691031] Buffer I/O error on device sda3, logical block 1
    [   36.691089] Buffer I/O error on device sda3, logical block 2
    [   36.691147] Buffer I/O error on device sda3, logical block 3
    [   36.691205] Buffer I/O error on device sda3, logical block 4
    [   36.691263] Buffer I/O error on device sda3, logical block 5
    [   36.691321] Buffer I/O error on device sda3, logical block 6
    [   36.691379] Buffer I/O error on device sda3, logical block 7
    [   36.691450] ata1: EH complete
    [   39.483058] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   39.483118] ata1.00: irq_stat 0x40000008
    [   39.483174] ata1.00: failed command: READ FPDMA QUEUED
    [   39.483235] ata1.00: cmd 60/08:10:38:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   39.483236]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   39.483379] ata1.00: status: { DRDY ERR }
    [   39.483434] ata1.00: error: { UNC }
    [   39.490667] ata1.00: configured for UDMA/133
    [   39.490682] ata1: EH complete
    [   42.160880] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   42.160940] ata1.00: irq_stat 0x40000008
    [   42.160996] ata1.00: failed command: READ FPDMA QUEUED
    [   42.161057] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   42.161058]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   42.161195] ata1.00: status: { DRDY ERR }
    [   42.161251] ata1.00: error: { UNC }
    [   42.168383] ata1.00: configured for UDMA/133
    [   42.168398] ata1: EH complete
    [   44.838614] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   44.838674] ata1.00: irq_stat 0x40000008
    [   44.838730] ata1.00: failed command: READ FPDMA QUEUED
    [   44.838791] ata1.00: cmd 60/08:10:38:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   44.838792]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   44.838929] ata1.00: status: { DRDY ERR }
    [   44.838985] ata1.00: error: { UNC }
    [   44.846997] ata1.00: configured for UDMA/133
    [   44.847012] ata1: EH complete
    [   47.638569] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   47.638629] ata1.00: irq_stat 0x40000008
    [   47.638685] ata1.00: failed command: READ FPDMA QUEUED
    [   47.638746] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   47.638747]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   47.638885] ata1.00: status: { DRDY ERR }
    [   47.638940] ata1.00: error: { UNC }
    [   47.646781] ata1.00: configured for UDMA/133
    [   47.646796] ata1: EH complete
    [   50.438503] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   50.438563] ata1.00: irq_stat 0x40000008
    [   50.438619] ata1.00: failed command: READ FPDMA QUEUED
    [   50.438680] ata1.00: cmd 60/08:10:38:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   50.438681]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   50.438818] ata1.00: status: { DRDY ERR }
    [   50.438874] ata1.00: error: { UNC }
    [   50.446520] ata1.00: configured for UDMA/133
    [   50.446535] ata1: EH complete
    [   53.249578] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   53.249637] ata1.00: irq_stat 0x40000008
    [   53.249694] ata1.00: failed command: READ FPDMA QUEUED
    [   53.249754] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   53.249756]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   53.249894] ata1.00: status: { DRDY ERR }
    [   53.249949] ata1.00: error: { UNC }
    [   53.258356] ata1.00: configured for UDMA/133
    [   53.258363] sd 0:0:0:0: [sda] Unhandled sense code
    [   53.258365] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [   53.258369] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [   53.258373] Descriptor sense data with sense descriptors (in hex):
    [   53.258375]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [   53.258384]         00 89 46 38 
    [   53.258388] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [   53.258391] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 38 00 00 08 00
    [   53.258399] end_request: I/O error, dev sda, sector 8996408
    [   53.258458] Buffer I/O error on device sda3, logical block 8
    [   53.258517] Buffer I/O error on device sda3, logical block 9
    [   53.258575] Buffer I/O error on device sda3, logical block 10
    [   53.258633] Buffer I/O error on device sda3, logical block 11
    [   53.258691] Buffer I/O error on device sda3, logical block 12
    [   53.258749] Buffer I/O error on device sda3, logical block 13
    [   53.258807] Buffer I/O error on device sda3, logical block 14
    [   53.258865] Buffer I/O error on device sda3, logical block 15
    [   53.258938] ata1: EH complete
    [   56.049576] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   56.049636] ata1.00: irq_stat 0x40000008
    [   56.049692] ata1.00: failed command: READ FPDMA QUEUED
    [   56.049753] ata1.00: cmd 60/08:10:38:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   56.049754]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   56.049891] ata1.00: status: { DRDY ERR }
    [   56.049946] ata1.00: error: { UNC }
    [   56.057145] ata1.00: configured for UDMA/133
    [   56.057160] ata1: EH complete
    [   58.627364] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   58.627423] ata1.00: irq_stat 0x40000008
    [   58.627480] ata1.00: failed command: READ FPDMA QUEUED
    [   58.627540] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   58.627542]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   58.627679] ata1.00: status: { DRDY ERR }
    [   58.627735] ata1.00: error: { UNC }
    [   58.635707] ata1.00: configured for UDMA/133
    [   58.635721] ata1: EH complete
    [   61.416206] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   61.416266] ata1.00: irq_stat 0x40000008
    [   61.416322] ata1.00: failed command: READ FPDMA QUEUED
    [   61.416383] ata1.00: cmd 60/08:10:38:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   61.416384]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   61.416522] ata1.00: status: { DRDY ERR }
    [   61.416577] ata1.00: error: { UNC }
    [   61.424501] ata1.00: configured for UDMA/133
    [   61.424516] ata1: EH complete
    [   64.094028] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   64.094088] ata1.00: irq_stat 0x40000008
    [   64.094144] ata1.00: failed command: READ FPDMA QUEUED
    [   64.094205] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   64.094206]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   64.094344] ata1.00: status: { DRDY ERR }
    [   64.094399] ata1.00: error: { UNC }
    [   64.102207] ata1.00: configured for UDMA/133
    [   64.102222] ata1: EH complete
    [   66.894007] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   66.894067] ata1.00: irq_stat 0x40000008
    [   66.894123] ata1.00: failed command: READ FPDMA QUEUED
    [   66.894184] ata1.00: cmd 60/08:10:38:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   66.894185]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   66.894323] ata1.00: status: { DRDY ERR }
    [   66.894378] ata1.00: error: { UNC }
    [   66.902016] ata1.00: configured for UDMA/133
    [   66.902031] ata1: EH complete
    [   69.705042] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   69.705103] ata1.00: irq_stat 0x40000008
    [   69.705159] ata1.00: failed command: READ FPDMA QUEUED
    [   69.705219] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   69.705221]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   69.705358] ata1.00: status: { DRDY ERR }
    [   69.705414] ata1.00: error: { UNC }
    [   69.712798] ata1.00: configured for UDMA/133
    [   69.712806] sd 0:0:0:0: [sda] Unhandled sense code
    [   69.712808] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [   69.712811] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [   69.712816] Descriptor sense data with sense descriptors (in hex):
    [   69.712818]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [   69.712827]         00 89 46 38 
    [   69.712831] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [   69.712834] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 38 00 00 08 00
    [   69.712843] end_request: I/O error, dev sda, sector 8996408
    [   69.712902] Buffer I/O error on device sda3, logical block 8
    [   69.712961] Buffer I/O error on device sda3, logical block 9
    [   69.713019] Buffer I/O error on device sda3, logical block 10
    [   69.713077] Buffer I/O error on device sda3, logical block 11
    [   69.713134] Buffer I/O error on device sda3, logical block 12
    [   69.713193] Buffer I/O error on device sda3, logical block 13
    [   69.713251] Buffer I/O error on device sda3, logical block 14
    [   69.713309] Buffer I/O error on device sda3, logical block 15
    [   69.713387] ata1: EH complete
    [   69.827586] loop: module loaded
    [   69.903807] UDF-fs: Partition marked readonly; forcing readonly mount
    [   69.914428] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [   69.944998] device-mapper: uevent: version 1.0.3
    [   69.945513] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
    [   69.970637] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
    [   70.024457] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
    [   70.067816] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
    [   70.921904] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,acl,barrier=1
    [   71.150985] udevd[486]: starting version 173
    [   71.404369] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f
    [   71.406452] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
    
    [...]
    
    [   73.267788] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [   73.267896] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [   74.416144] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [   74.416234] ata1.00: irq_stat 0x40000008
    [   74.416288] ata1.00: failed command: READ FPDMA QUEUED
    [   74.416350] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   74.416351]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   74.416469] ata1.00: status: { DRDY ERR }
    [   74.416500] ata1.00: error: { UNC }
    [   74.424479] ata1.00: configured for UDMA/133
    [   74.424495] ata1: EH complete
    [   77.204960] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   77.205015] ata1.00: irq_stat 0x40000008
    [   77.205051] ata1.00: failed command: READ FPDMA QUEUED
    [   77.205097] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [   77.205098]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   77.205218] ata1.00: status: { DRDY ERR }
    [   77.205250] ata1.00: error: { UNC }
    [   77.213237] ata1.00: configured for UDMA/133
    [   77.213252] ata1: EH complete
    [   79.993868] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   79.993956] ata1.00: irq_stat 0x40000008
    [   79.994009] ata1.00: failed command: READ FPDMA QUEUED
    [   79.994072] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [   79.994073]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   79.994193] ata1.00: status: { DRDY ERR }
    [   79.994224] ata1.00: error: { UNC }
    [   80.002019] ata1.00: configured for UDMA/133
    [   80.002034] ata1: EH complete
    [   82.782735] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   82.782820] ata1.00: irq_stat 0x40000008
    [   82.782873] ata1.00: failed command: READ FPDMA QUEUED
    [   82.782938] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [   82.782940]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   82.784870] ata1.00: status: { DRDY ERR }
    [   82.786722] ata1.00: error: { UNC }
    [   82.794834] ata1.00: configured for UDMA/133
    [   82.794862] ata1: EH complete
    [   85.571588] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   85.573495] ata1.00: irq_stat 0x40000008
    [   85.575288] ata1.00: failed command: READ FPDMA QUEUED
    [   85.577092] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [   85.577093]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   85.580703] ata1.00: status: { DRDY ERR }
    [   85.582452] ata1.00: error: { UNC }
    [   85.590589] ata1.00: configured for UDMA/133
    [   85.590615] ata1: EH complete
    [   88.360471] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0
    [   88.362287] ata1.00: irq_stat 0x40000008
    [   88.364031] ata1.00: failed command: READ FPDMA QUEUED
    [   88.365746] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [   88.365748]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   88.369287] ata1.00: status: { DRDY ERR }
    [   88.371073] ata1.00: error: { UNC }
    [   88.379365] ata1.00: configured for UDMA/133
    [   88.379390] sd 0:0:0:0: [sda] Unhandled sense code
    [   88.379394] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [   88.379400] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [   88.379406] Descriptor sense data with sense descriptors (in hex):
    [   88.379410]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [   88.379425]         00 89 46 30 
    [   88.379432] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [   88.379437] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 30 00 00 08 00
    [   88.379457] end_request: I/O error, dev sda, sector 8996400
    [   88.381297] Buffer I/O error on device sda3, logical block 0
    [   88.383125] Buffer I/O error on device sda3, logical block 1
    [   88.384958] Buffer I/O error on device sda3, logical block 2
    [   88.386742] Buffer I/O error on device sda3, logical block 3
    [   88.388481] Buffer I/O error on device sda3, logical block 4
    [   88.390205] Buffer I/O error on device sda3, logical block 5
    [   88.391904] Buffer I/O error on device sda3, logical block 6
    [   88.393554] Buffer I/O error on device sda3, logical block 7
    [   88.395139] ata1: EH complete
    [   91.271495] ata1.00: exception Emask 0x0 SAct 0x5 SErr 0x0 action 0x0
    [   91.273159] ata1.00: irq_stat 0x40000008
    [   91.274742] ata1.00: failed command: READ FPDMA QUEUED
    [   91.276319] ata1.00: cmd 60/08:10:30:46:89/00:00:00:00:00/40 tag 2 ncq 4096 in
    [   91.276320]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   91.279499] ata1.00: status: { DRDY ERR }
    [   91.281079] ata1.00: error: { UNC }
    [   91.290272] ata1.00: configured for UDMA/133
    [   91.290295] ata1: EH complete
    [   94.115966] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [   94.117636] ata1.00: irq_stat 0x40000008
    [   94.119204] ata1.00: failed command: READ FPDMA QUEUED
    [   94.120794] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   94.120795]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   94.123960] ata1.00: status: { DRDY ERR }
    [   94.125535] ata1.00: error: { UNC }
    [   94.134113] ata1.00: configured for UDMA/133
    [   94.134135] ata1: EH complete
    [   96.971485] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [   96.973153] ata1.00: irq_stat 0x40000008
    [   96.974753] ata1.00: failed command: READ FPDMA QUEUED
    [   96.976330] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [   96.976331]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   96.979538] ata1.00: status: { DRDY ERR }
    [   96.981142] ata1.00: error: { UNC }
    [   96.988965] ata1.00: configured for UDMA/133
    [   96.988987] ata1: EH complete
    [   99.804795] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [   99.806457] ata1.00: irq_stat 0x40000008
    [   99.808056] ata1.00: failed command: READ FPDMA QUEUED
    [   99.809644] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [   99.809646]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [   99.812853] ata1.00: status: { DRDY ERR }
    [   99.814457] ata1.00: error: { UNC }
    [   99.823798] ata1.00: configured for UDMA/133
    [   99.823820] ata1: EH complete
    [  101.467154] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,acl,barrier=1
    [  102.660284] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  102.661835] ata1.00: irq_stat 0x40000008
    [  102.663349] ata1.00: failed command: READ FPDMA QUEUED
    [  102.664910] ata1.00: cmd 60/08:08:30:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [  102.664911]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  102.667988] ata1.00: status: { DRDY ERR }
    [  102.669504] ata1.00: error: { UNC }
    [  102.678607] ata1.00: configured for UDMA/133
    [  102.678636] ata1: EH complete
    [  105.515867] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  105.517452] ata1.00: irq_stat 0x40000008
    [  105.518973] ata1.00: failed command: READ FPDMA QUEUED
    [  105.520494] ata1.00: cmd 60/08:00:30:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  105.520495]          res 41/40:00:30:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  105.523555] ata1.00: status: { DRDY ERR }
    [  105.525073] ata1.00: error: { UNC }
    [  105.534468] ata1.00: configured for UDMA/133
    [  105.534486] sd 0:0:0:0: [sda] Unhandled sense code
    [  105.534490] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [  105.534496] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [  105.534502] Descriptor sense data with sense descriptors (in hex):
    [  105.534506]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [  105.534521]         00 89 46 30 
    [  105.534528] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [  105.534533] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 30 00 00 08 00
    [  105.534548] end_request: I/O error, dev sda, sector 8996400
    [  105.536050] Buffer I/O error on device sda3, logical block 0
    [  105.537593] Buffer I/O error on device sda3, logical block 1
    [  105.539067] Buffer I/O error on device sda3, logical block 2
    [  105.540543] Buffer I/O error on device sda3, logical block 3
    [  105.541987] Buffer I/O error on device sda3, logical block 4
    [  105.543438] Buffer I/O error on device sda3, logical block 5
    [  105.544860] Buffer I/O error on device sda3, logical block 6
    [  105.546269] Buffer I/O error on device sda3, logical block 7
    [  105.547705] ata1: EH complete
    [  108.315793] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  108.317311] ata1.00: irq_stat 0x40000008
    [  108.318750] ata1.00: failed command: READ FPDMA QUEUED
    [  108.320230] ata1.00: cmd 60/08:08:38:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [  108.320231]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  108.323227] ata1.00: status: { DRDY ERR }
    [  108.324765] ata1.00: error: { UNC }
    [  108.334250] ata1.00: configured for UDMA/133
    [  108.334273] ata1: EH complete
    [  111.160243] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  111.161941] ata1.00: irq_stat 0x40000008
    [  111.163502] ata1.00: failed command: READ FPDMA QUEUED
    [  111.165068] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  111.165069]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  111.168237] ata1.00: status: { DRDY ERR }
    [  111.169808] ata1.00: error: { UNC }
    [  111.179093] ata1.00: configured for UDMA/133
    [  111.179114] ata1: EH complete
    [  114.015753] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
    [  114.017434] ata1.00: irq_stat 0x40000008
    [  114.019007] ata1.00: failed command: READ FPDMA QUEUED
    [  114.020572] ata1.00: cmd 60/08:08:38:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [  114.020574]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  114.023822] ata1.00: status: { DRDY ERR }
    [  114.025420] ata1.00: error: { UNC }
    [  114.033899] ata1.00: configured for UDMA/133
    [  114.033915] ata1: EH complete
    [  116.871269] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  116.872946] ata1.00: irq_stat 0x40000008
    [  116.874570] ata1.00: failed command: READ FPDMA QUEUED
    [  116.876191] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  116.876192]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  116.879489] ata1.00: status: { DRDY ERR }
    [  116.881102] ata1.00: error: { UNC }
    [  116.889771] ata1.00: configured for UDMA/133
    [  116.889793] ata1: EH complete
    [  119.726839] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  119.728450] ata1.00: irq_stat 0x40000008
    [  119.730057] ata1.00: failed command: READ FPDMA QUEUED
    [  119.731642] ata1.00: cmd 60/08:08:38:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [  119.731644]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  119.734852] ata1.00: status: { DRDY ERR }
    [  119.736431] ata1.00: error: { UNC }
    [  119.745618] ata1.00: configured for UDMA/133
    [  119.745639] ata1: EH complete
    [  122.593482] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  122.595108] ata1.00: irq_stat 0x40000008
    [  122.596702] ata1.00: failed command: READ FPDMA QUEUED
    [  122.598283] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  122.598284]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  122.598287] ata1.00: status: { DRDY ERR }
    [  122.598289] ata1.00: error: { UNC }
    [  122.604535] ata1.00: configured for UDMA/133
    [  122.604545] sd 0:0:0:0: [sda] Unhandled sense code
    [  122.604547] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [  122.604550] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [  122.604554] Descriptor sense data with sense descriptors (in hex):
    [  122.604556]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [  122.604561]         00 89 46 38 
    [  122.604564] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [  122.604568] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 38 00 00 08 00
    [  122.604574] end_request: I/O error, dev sda, sector 8996408
    [  122.604577] Buffer I/O error on device sda3, logical block 8
    [  122.604580] Buffer I/O error on device sda3, logical block 9
    [  122.604583] Buffer I/O error on device sda3, logical block 10
    [  122.604585] Buffer I/O error on device sda3, logical block 11
    [  122.604587] Buffer I/O error on device sda3, logical block 12
    [  122.604589] Buffer I/O error on device sda3, logical block 13
    [  122.604592] Buffer I/O error on device sda3, logical block 14
    [  122.604594] Buffer I/O error on device sda3, logical block 15
    [  122.604608] ata1: EH complete
    [  125.382349] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
    [  125.384015] ata1.00: irq_stat 0x40000008
    [  125.385572] ata1.00: failed command: READ FPDMA QUEUED
    [  125.387157] ata1.00: cmd 60/08:08:38:46:89/00:00:00:00:00/40 tag 1 ncq 4096 in
    [  125.387159]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  125.390331] ata1.00: status: { DRDY ERR }
    [  125.391899] ata1.00: error: { UNC }
    [  125.401261] ata1.00: configured for UDMA/133
    [  125.401282] ata1: EH complete
    [  128.215602] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [  128.217281] ata1.00: irq_stat 0x40000008
    [  128.218832] ata1.00: failed command: READ FPDMA QUEUED
    [  128.220416] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  128.220418]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  128.223574] ata1.00: status: { DRDY ERR }
    [  128.225151] ata1.00: error: { UNC }
    [  128.234089] ata1.00: configured for UDMA/133
    [  128.234105] ata1: EH complete
    [  131.004507] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [  131.006161] ata1.00: irq_stat 0x40000008
    [  131.007745] ata1.00: failed command: READ FPDMA QUEUED
    [  131.009304] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  131.009305]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  131.012477] ata1.00: status: { DRDY ERR }
    [  131.014055] ata1.00: error: { UNC }
    [  131.021851] ata1.00: configured for UDMA/133
    [  131.021867] ata1: EH complete
    [  133.804486] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [  133.806145] ata1.00: irq_stat 0x40000008
    [  133.807737] ata1.00: failed command: READ FPDMA QUEUED
    [  133.809284] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  133.809286]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  133.812467] ata1.00: status: { DRDY ERR }
    [  133.814043] ata1.00: error: { UNC }
    [  133.822632] ata1.00: configured for UDMA/133
    [  133.822651] ata1: EH complete
    [  136.604455] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [  136.606119] ata1.00: irq_stat 0x40000008
    [  136.607815] ata1.00: failed command: READ FPDMA QUEUED
    [  136.609396] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  136.609397]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  136.612568] ata1.00: status: { DRDY ERR }
    [  136.614126] ata1.00: error: { UNC }
    [  136.623455] ata1.00: configured for UDMA/133
    [  136.623477] ata1: EH complete
    [  139.393369] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
    [  139.395019] ata1.00: irq_stat 0x40000008
    [  139.396581] ata1.00: failed command: READ FPDMA QUEUED
    [  139.398173] ata1.00: cmd 60/08:00:38:46:89/00:00:00:00:00/40 tag 0 ncq 4096 in
    [  139.398174]          res 41/40:00:38:46:89/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    [  139.401358] ata1.00: status: { DRDY ERR }
    [  139.401360] ata1.00: error: { UNC }
    [  139.408238] ata1.00: configured for UDMA/133
    [  139.408255] sd 0:0:0:0: [sda] Unhandled sense code
    [  139.408259] sd 0:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [  139.408265] sd 0:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [  139.408272] Descriptor sense data with sense descriptors (in hex):
    [  139.408276]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [  139.408291]         00 89 46 38 
    [  139.408298] sd 0:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [  139.408303] sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 38 00 00 08 00
    [  139.408320] end_request: I/O error, dev sda, sector 8996408
    [  139.409893] Buffer I/O error on device sda3, logical block 8
    [  139.411541] Buffer I/O error on device sda3, logical block 9
    [  139.413161] Buffer I/O error on device sda3, logical block 10
    [  139.414818] Buffer I/O error on device sda3, logical block 11
    [  139.416450] Buffer I/O error on device sda3, logical block 12
    [  139.418098] Buffer I/O error on device sda3, logical block 13
    [  139.419748] Buffer I/O error on device sda3, logical block 14
    [  139.421379] Buffer I/O error on device sda3, logical block 15
    [  139.422981] ata1: EH complete
    [  333.660614] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,acl,barrier=1
    
    In voller Länge: Den Anhang dmesg.log.txt betrachten

    smartctl
    Code:
    smartctl 5.42 2011-10-20 r3458 [i686-linux-3.0-ARCH] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Model Family:     Western Digital Scorpio Blue Serial ATA (Adv. Format)
    Device Model:     WDC WD6400BPVT-00HXZT0
    Serial Number:    WD-WXF1A2094879
    LU WWN Device Id: 5 0014ee 2aee13d28
    Firmware Version: 01.01A01
    User Capacity:    640,135,028,736 bytes [640 GB]
    Sector Size:      512 bytes logical/physical
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   8
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Wed Feb 22 06:11:29 2012 PST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x00)	Offline data collection activity
    					was never started.
    					Auto Offline Data Collection: Disabled.
    Self-test execution status:      (   0)	The previous self-test routine completed
    					without error or no self-test has ever 
    					been run.
    Total time to complete Offline 
    data collection: 		(15600) seconds.
    Offline data collection
    capabilities: 			 (0x7b) SMART execute Offline immediate.
    					Auto Offline data collection on/off support.
    					Suspend Offline collection upon new
    					command.
    					Offline surface scan supported.
    					Self-test supported.
    					Conveyance Self-test supported.
    					Selective Self-test supported.
    SMART capabilities:            (0x0003)	Saves SMART data before entering
    					power-saving mode.
    					Supports SMART auto save timer.
    Error logging capability:        (0x01)	Error logging supported.
    					General Purpose Logging supported.
    Short self-test routine 
    recommended polling time: 	 (   2) minutes.
    Extended self-test routine
    recommended polling time: 	 ( 181) minutes.
    Conveyance self-test routine
    recommended polling time: 	 (   5) minutes.
    SCT capabilities: 	       (0x7031)	SCT Status supported.
    					SCT Feature Control supported.
    					SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   199   199   051    Pre-fail  Always       -       487
      3 Spin_Up_Time            0x0027   188   183   021    Pre-fail  Always       -       1575
      4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2126
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
      9 Power_On_Hours          0x0032   092   092   000    Old_age   Always       -       6113
     10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2124
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       410
    193 Load_Cycle_Count        0x0032   079   079   000    Old_age   Always       -       365357
    194 Temperature_Celsius     0x0022   103   083   000    Old_age   Always       -       44
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       25
    198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    No self-tests have been logged.  [To run self-tests, use: smartctl -t]
    
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    hdparm /dev/sda
    Code:
    /dev/sda:
     multcount     = 16 (on)
     IO_support    =  1 (32-bit)
     readonly      =  0 (off)
     readahead     = 256 (on)
     geometry      = 77825/255/63, sectors = 1250263728, start = 0
    
    hdparm /dev/sda1
    Code:
    
    /dev/sda1:
     multcount     = 16 (on)
     IO_support    =  1 (32-bit)
     readonly      =  0 (off)
     readahead     = 256 (on)
     geometry      = 12289/255/63, sectors = 995967, start = 63
    
    
    hdparm /dev/sda2
    Code:
    
    /dev/sda2:
     multcount     = 16 (on)
     IO_support    =  1 (32-bit)
     readonly      =  0 (off)
     readahead     = 256 (on)
     geometry      = 12289/255/63, sectors = 8000370, start = 996030
    
    
    hdparm /dev/sda3
    Code:
    
    /dev/sda3:
     multcount     = 16 (on)
     IO_support    =  1 (32-bit)
     readonly      =  0 (off)
     readahead     = 256 (on)
     geometry      = 77265/255/63, sectors = 1241262225, start = 8996400
    
    
    fsck.ext4 /dev/sda3
    Code:
    e2fsck 1.41.14 (22-Dec-2010)
    fsck.ext4: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda3
    Could this be a zero-length partition?
    
    Das sichern der partition mittels dd funktioniert ebenfalls nicht:
    dd if=/dev/sda3 of=/mnt/usbhdd/ext3.img
    Code:
    dd: reading `/dev/sda3´: Input/output error
    0+0 records in
    0+0 records out
    0 bytes (0 B) copied, 31.7979 s, 0.0 kB/s
    
    mount -t ext4 -r /dev/sda3 /mnt/sda3
    Code:
    mount: wrong fs type, bad option, bad superblock on /dev/sda3,
    missing codepage or helper program, or other error
    in some cases useful info is found in syslog - try
    dmesg | tail or so
    
    dmesg | tail
    Code:
    [ 1221.330384] sd 2:0:0:0: [sda]  Result: hostbyte=0x00 driverbyte=0x08
    [ 1221.330390] sd 2:0:0:0: [sda]  Sense Key : 0x3 [current] [descriptor]
    [ 1221.330397] Descriptor sense data with sense descriptors (in hex):
    [ 1221.330400]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
    [ 1221.330416]         00 89 46 32 
    [ 1221.330422] sd 2:0:0:0: [sda]  ASC=0x11 ASCQ=0x4
    [ 1221.330428] sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 89 46 32 00 00 02 00
    [ 1221.330442] end_request: I/O error, dev sda, sector 8996402
    [ 1221.332036] ata3: EH complete
    [ 1221.332041] EXT4-fs (sda3): unable to read superblock
    


    Am Liebsten würde ich gerne mittels fsck meine festplatte vorläufig reparieren und eine geordnete Sicherung begehen, aber ro mounten würde mir auch schon vollkommen ausreichen.
    Was kann ich tun?
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. Emess

    Emess Turmspringer

    Dabei seit:
    08.10.2006
    Beiträge:
    1.045
    Zustimmungen:
    0
    Ort:
    Odenwald
    ich würde es mit einem Live-System und "testdisk" probieren. Und wenn das klappen würde Daten sichern!
     
  4. #3 tgruene, 22.02.2012
    tgruene

    tgruene Routinier

    Dabei seit:
    02.02.2012
    Beiträge:
    418
    Zustimmungen:
    0
    Solche Kernel-Nachrichten deuten meiner Erfahrung ein recht schnelles und baldiges Ende der Platte an. In so einem Fall solltest Du sie so schnell wie moeglich nur lesbar einhaengen und versuchen, die Daten zu sichern. dd kennt auch die Option 'conv=noerror'. Vielleicht kommst Du damit weiter. Du kannst auch mal die Tools auf der SysRescueCD durchschauen, ob sie Dir weiterhelfen. Wenn das alles nicht hilft (was zu befuerchten ist), kann ich das Programm von Stellar Phoenix empfehlen. Das kostet zwar Geld, hat uns jedoch schon ein oder zweimal weitergeholfen.
    Soweit ich weiss, kann man eine Version runterladen, die anzeigt, welche Daten sie retten kann, und erst dann entscheiden, ob man das Programm kauft oder nicht.

    Viel Glueck!
     
  5. #4 BloodyMary, 02.03.2012
    BloodyMary

    BloodyMary Pornophon

    Dabei seit:
    15.03.2005
    Beiträge:
    615
    Zustimmungen:
    1
    Ort:
    Bayern
    Ich habe es bis jetzt ruhen lassen.
    "Vor der Eigenen Haustür" habe ich in der Wiki von Archlinux einen guten Artikel zu File-Recorvery gefunden: https://wiki.archlinux.org/index.php/File_Recovery
    Momentan habe ich die platte in ein externes gehäuse eingebaut und mache mit ddrescue ein vollständiges image.
    Garantie ist auchnoch auf der Platte, also kann ich die zumindest umtauschen.
     
  6. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
Thema:

Festplatte stirbt, dd funktioniert nicht

Die Seite wird geladen...

Festplatte stirbt, dd funktioniert nicht - Ähnliche Themen

  1. Festplatte auf SD Karte umziehen

    Festplatte auf SD Karte umziehen: Hi zusammen, ich habe einen alten Laptop zum Server umfunktioniert. habe bei der Installation von CentOS bzw. der Partitionierung die...
  2. Western Digital widmet dem Raspberry Pi eine eigene Festplatte

    Western Digital widmet dem Raspberry Pi eine eigene Festplatte: Der Festplattenhersteller Western Digital (WD) gibt die Verfügbarkeit einer 314 GByte großen Festplatte für den Raspberry Pi bekannt. Weiterlesen...
  3. Festplatte wird nicht erkannt

    Festplatte wird nicht erkannt: Hallo, ich habe auf meinem HTPC (Mainboard IOM330-ITX von Zotac) XBMCbuntu installiert, das ist ein Lubuntu mit XBMC als HTPC-Oberfläche. Das...
  4. Indiegogo-Kampagne für Ubuntu-Tablet mit großer Festplatte

    Indiegogo-Kampagne für Ubuntu-Tablet mit großer Festplatte: Das UbuTab getaufte Gerät, für das seit einer Woche eine Finanzierungskampagne auf der Crowdfundingplattform Indiegogo läuft, soll eine 1 TB...
  5. Kurztipp: Clonezilla: Festplatten per Klick kopieren

    Kurztipp: Clonezilla: Festplatten per Klick kopieren: Auf der bisherigen Festplatte ist kein Platz mehr, und der Inhalt soll auf eine neue Platte umziehen. Bei dieser Aufgabe und bei der...