Fehlercodes bei modemeinwahl

Dieses Thema im Forum "Internet, lokale Netzwerke und Wireless Lan" wurde erstellt von mirwald, 29.09.2004.

  1. #1 mirwald, 29.09.2004
    mirwald

    mirwald Mitglied

    Dabei seit:
    19.11.2003
    Beiträge:
    49
    Zustimmungen:
    0
    Ort:
    Oberfranken
    Moin kann mir mal jemand verraten wie ich rausbekomme was die Fehlercodes bedeuten die mein einwahlprotokoll (kinternet) produziert?
    Suse 9.1 Modem ist schon gelaufen. Hab ich wo nen eintrag vergesse?
    Apropos Eintrag: wo muß ich was eintragen damit das Modemmodul vom start weg geladen wird??
    Ist ein smartlink soft modem hab's zum laufen bekommen nu aber kommt im einwahlprotokoll "error 2".
    merde
    cu mirwald
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. Cyber

    Cyber .:DISTORTED:.

    Dabei seit:
    16.05.2003
    Beiträge:
    999
    Zustimmungen:
    0
    Ort:
    D -> BW -> Karlsruhe
    Moin moin.
    Was sagt denn die /var/log/messages ?
     
  4. #3 mirwald, 29.09.2004
    mirwald

    mirwald Mitglied

    Dabei seit:
    19.11.2003
    Beiträge:
    49
    Zustimmungen:
    0
    Ort:
    Oberfranken
    Also es ist soo.... wenn ich auf der Konsole "modprobe modem" und dann unter yast im Runleveleditor den slmodem eintrag aktiviere funktioniert die sache wieder....
    was muss ich wo(etc/modprobe.conf) eintragen vor allendingen was!?

    /var/log/localmessages:

    Sep 28 19:50:09 nope pppd[6311]: unrecognized option '/dev/ttySL0'
    Sep 28 19:51:39 nope startproc: startproc: exit status of parent of /usr/sbin/slmodemd: 255
    Sep 28 19:51:58 nope pppd[7392]: unrecognized option '/dev/ttySL0'
    Sep 28 19:52:04 nope pppd[7395]: unrecognized option '/dev/ttySL0'
    Sep 28 19:53:27 nope pppd[7485]: unrecognized option '/dev/ttySL0'
    Sep 28 19:54:17 nope pppd[7523]: unrecognized option '/dev/ttySL0'
    Sep 28 19:56:02 nope pppd[7731]: unrecognized option '/dev/ttySL0'
    Sep 28 19:56:12 nope pppd[7738]: unrecognized option '/dev/ttySL0'
    Sep 28 19:58:32 nope pppd[8801]: unrecognized option '/dev/ttySL0'
    Sep 29 14:57:47 nope pppd[6745]: unrecognized option '/dev/ttySL0'
    Sep 29 15:52:38 nope pppd[9269]: Plugin passwordfd.so loaded.
    Sep 29 15:52:38 nope pppd[9269]: pppd 2.4.2 started by root, uid 0
    Sep 29 15:53:01 nope pppd[9269]: Terminating on signal 15.
    Sep 29 15:53:01 nope pppd[9269]: Connect script failed
    Sep 29 15:53:02 nope pppd[9269]: Exit.
    Sep 29 15:53:29 nope pppd[9335]: Plugin passwordfd.so loaded.
    Sep 29 15:53:29 nope pppd[9335]: pppd 2.4.2 started by root, uid 0
    Sep 29 15:54:00 nope pppd[9335]: Serial connection established.
    Sep 29 15:54:00 nope pppd[9335]: Using interface ppp0
    Sep 29 15:54:00 nope pppd[9335]: Connect: ppp0 <--> /dev/ttySL0
    Sep 29 15:54:01 nope pppd[9335]: PAP authentication succeeded
    Sep 29 15:54:02 nope pppd[9335]: replacing old default route to eth0 [127.18.10.10]
    Sep 29 15:54:02 nope pppd[9335]: local IP address 217.250.142.61
    Sep 29 15:54:02 nope pppd[9335]: remote IP address 212.185.251.125
    Sep 29 15:54:02 nope pppd[9335]: primary DNS address 217.237.151.97
    Sep 29 15:54:02 nope pppd[9335]: secondary DNS address 217.237.150.33
    Sep 29 15:54:02 nope pppd[9335]: Script /etc/ppp/ip-up finished (pid 9371), status = 0x0
    Sep 29 16:07:11 nope pppd[9335]: Terminating on signal 15.
    Sep 29 16:07:11 nope pppd[9335]: restoring old default route to eth0 [127.18.10.10]
    Sep 29 16:07:11 nope pppd[9335]: Connection terminated.
    Sep 29 16:07:11 nope pppd[9335]: Connect time 13.2 minutes.
    Sep 29 16:07:11 nope pppd[9335]: Sent 371994 bytes, received 1760354 bytes.
    Sep 29 16:07:11 nope pppd[9335]: Script /etc/ppp/ip-down finished (pid 9808), status = 0x0
    Sep 29 16:07:11 nope pppd[9335]: Connect time 13.2 minutes.
    Sep 29 16:07:11 nope pppd[9335]: Sent 371994 bytes, received 1760354 bytes.
    Sep 29 16:07:11 nope pppd[9335]: Exit.


    var/log/messages:

    Sep 29 14:52:23 nope su: pam_unix2: session started for user root, service su
    Sep 29 14:55:11 nope kernel: NET: Registered protocol family 23
    Sep 29 14:55:11 nope kernel: IrCOMM protocol (Dag Brattli)
    Sep 29 14:55:17 nope kernel: ltmodem: no version for "struct_module" found: kernel tainted.
    Sep 29 14:55:17 nope kernel: ltmodem: module license 'Proprietary' taints kernel.
    Sep 29 14:55:17 nope kernel: Loading Lucent Modem Controller driver version 8.26
    Sep 29 14:55:17 nope kernel: ltserial: No device detected
    Sep 29 14:55:17 nope modprobe: FATAL: Error inserting ltserial (/lib/modules/2.6.4-override-smp/ltserial.ko): No such device
    Sep 29 14:55:58 nope kernel: slamr: module license 'Smart Link Ltd.' taints kernel.
    Sep 29 14:55:58 nope kernel: slamr: SmartLink AMRMO modem.
    Sep 29 14:55:58 nope kernel: slamr: probe 1039:7013 SiS630 card...
    Sep 29 14:55:58 nope kernel: slamr: mc97 codec is SIL22
    Sep 29 14:55:58 nope kernel: slamr: slamr0 is SiS630 card.
    Sep 29 14:56:21 nope kernel: ltserial: No device detected
    Sep 29 14:56:21 nope modprobe: FATAL: Error inserting ltserial (/lib/modules/2.6.4-override-smp/ltserial.ko): No such device
    Sep 29 14:56:27 nope kernel: ircomm_tty_change_speed(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)
    Sep 29 14:56:27 nope last message repeated 3 times
    Sep 29 14:57:47 nope pppd[6745]: unrecognized option '/dev/ttySL0'
    Sep 29 14:59:00 nope /USR/SBIN/CRON[6748]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Sep 29 15:09:58 nope -- MARK --
    Sep 29 15:13:07 nope kernel: mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
    Sep 29 15:13:08 nope su: pam_unix2: session finished for user root, service su
    Sep 29 15:13:18 nope kdm: :1[7104]: pam_unix2: session started for user root, service xdm
    Sep 29 15:15:26 nope gconfd (root-7341): starting (version 2.4.0.1), pid 7341 user 'root'
    Sep 29 15:15:26 nope gconfd (root-7341): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0
    Sep 29 15:15:26 nope gconfd (root-7341): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1
    Sep 29 15:15:26 nope gconfd (root-7341): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only config source at position 2
    Sep 29 15:29:58 nope -- MARK --
    Sep 29 15:31:26 nope gconfd (root-7341): GConf server is not in use, shutting down.
    Sep 29 15:31:26 nope gconfd (root-7341): Exiting
    Sep 29 15:45:59 nope kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Sep 29 15:45:59 nope kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Sep 29 15:45:59 nope kernel: ip_conntrack version 2.1 (8175 buckets, 65400 max) - 300 bytes per conntrack
    Sep 29 15:47:26 nope kernel: eth0: link down
    Sep 29 15:47:28 nope kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Sep 29 15:50:03 nope kernel: ltserial: No device detected
    Sep 29 15:50:03 nope modprobe: FATAL: Error inserting ltserial (/lib/modules/2.6.4-override-smp/ltserial.ko): No such device
    Sep 29 15:52:38 nope pppd[9269]: Plugin passwordfd.so loaded.
    Sep 29 15:52:38 nope kernel: CSLIP: code copyright 1989 Regents of the University of California
    Sep 29 15:52:38 nope kernel: PPP generic driver version 2.4.2
    Sep 29 15:52:38 nope pppd[9269]: pppd 2.4.2 started by root, uid 0
    Sep 29 15:52:39 nope wvdial[9287]: WvDial: Internet dialer version 1.54.0
    Sep 29 15:52:39 nope wvdial[9287]: Initializing modem.
    Sep 29 15:52:39 nope wvdial[9287]: Sending: ATM1
    Sep 29 15:52:39 nope wvdial[9287]: ATM1
    Sep 29 15:52:39 nope wvdial[9287]: OK
    Sep 29 15:52:39 nope wvdial[9287]: Sending: ATX3
    Sep 29 15:52:39 nope wvdial[9287]: ATX3
    Sep 29 15:52:39 nope wvdial[9287]: OK
    Sep 29 15:52:39 nope wvdial[9287]: Modem initialized.
    Sep 29 15:52:39 nope wvdial[9287]: Sending: ATDT0191011
    Sep 29 15:52:39 nope wvdial[9287]: Waiting for carrier.
    Sep 29 15:52:39 nope wvdial[9287]: ATDT0191011
    Sep 29 15:53:01 nope pppd[9269]: Terminating on signal 15.
    Sep 29 15:53:01 nope pppd[9269]: Connect script failed
    Sep 29 15:53:02 nope pppd[9269]: Exit.
    Sep 29 15:53:18 nope kdm: :1[7104]: pam_unix2: session finished for user root, service xdm
    Sep 29 15:53:29 nope pppd[9335]: Plugin passwordfd.so loaded.
    Sep 29 15:53:29 nope pppd[9335]: pppd 2.4.2 started by root, uid 0
    Sep 29 15:53:30 nope wvdial[9336]: WvDial: Internet dialer version 1.54.0
    Sep 29 15:53:30 nope wvdial[9336]: Initializing modem.
    Sep 29 15:53:30 nope wvdial[9336]: Sending: ATM1
    Sep 29 15:53:31 nope wvdial[9336]: ATM1
    Sep 29 15:53:31 nope wvdial[9336]: OK
    Sep 29 15:53:31 nope wvdial[9336]: Sending: ATX3
    Sep 29 15:53:31 nope wvdial[9336]: ATX3
    Sep 29 15:53:31 nope wvdial[9336]: OK
    Sep 29 15:53:31 nope wvdial[9336]: Modem initialized.
    Sep 29 15:53:31 nope wvdial[9336]: Sending: ATDT0191011
    Sep 29 15:53:31 nope wvdial[9336]: Waiting for carrier.
    Sep 29 15:53:31 nope wvdial[9336]: ATDT0191011
    Sep 29 15:54:00 nope wvdial[9336]: CONNECT 44000
    Sep 29 15:54:00 nope wvdial[9336]: Carrier detected. Chatmode finished.
    Sep 29 15:54:00 nope pppd[9335]: Serial connection established.
    Sep 29 15:54:00 nope pppd[9335]: Using interface ppp0
    Sep 29 15:54:00 nope pppd[9335]: Connect: ppp0 <--> /dev/ttySL0
    Sep 29 15:54:01 nope pppd[9335]: PAP authentication succeeded
    Sep 29 15:54:01 nope kernel: PPP BSD Compression module registered
    Sep 29 15:54:01 nope kernel: PPP Deflate Compression module registered
    Sep 29 15:54:02 nope pppd[9335]: replacing old default route to eth0 [192.168.0.2]
    Sep 29 15:54:02 nope pppd[9335]: local IP address 217.250.142.61
    Sep 29 15:54:02 nope pppd[9335]: remote IP address 212.185.251.125
    Sep 29 15:54:02 nope pppd[9335]: primary DNS address 217.237.151.97
    Sep 29 15:54:02 nope pppd[9335]: secondary DNS address 217.237.150.33
    Sep 29 15:54:02 nope modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
    Sep 29 15:54:02 nope pppd[9335]: Script /etc/ppp/ip-up finished (pid 9371), status = 0x0
    Sep 29 15:54:35 nope gconfd (nope-9457): (Version 2.4.0.1) wird gestartet, Prozesskennung 9457, Benutzer »nope«
    Sep 29 15:54:35 nope gconfd (nope-9457): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Sep 29 15:54:35 nope gconfd (nope-9457): Die Adresse »xml:readwrite:/home/nope/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
    Sep 29 15:54:35 nope gconfd (nope-9457): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
    Sep 29 15:55:00 nope kernel: eth0: link down
    Sep 29 15:55:01 nope kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Sep 29 15:59:00 nope /USR/SBIN/CRON[9537]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Sep 29 16:02:35 nope gconfd (nope-9457): Der GConf-Server wird nicht verwendet und daher beendet.
    Sep 29 16:02:35 nope gconfd (nope-9457): Beenden
    Sep 29 16:07:11 nope pppd[9335]: Terminating on signal 15.
    Sep 29 16:07:11 nope pppd[9335]: restoring old default route to eth0 [192.168.0.2]
    Sep 29 16:07:11 nope modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
    Sep 29 16:07:11 nope pppd[9335]: Connection terminated.
    Sep 29 16:07:11 nope pppd[9335]: Connect time 13.2 minutes.
    Sep 29 16:07:11 nope pppd[9335]: Sent 371994 bytes, received 1760354 bytes.
    Sep 29 16:07:11 nope pppd[9335]: Script /etc/ppp/ip-down finished (pid 9808), status = 0x0
    Sep 29 16:07:11 nope pppd[9335]: Connect time 13.2 minutes.
    Sep 29 16:07:11 nope pppd[9335]: Sent 371994 bytes, received 1760354 bytes.
    Sep 29 16:07:11 nope pppd[9335]: Exit.
    Sep 29 16:10:08 nope kernel: mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
    Sep 29 16:10:18 nope kdm: :1[9981]: pam_unix2: session started for user root, service xdm



    ach eines noch ist mir aufgefallen wenn ich ne webseite unter Konquerer archiviere macht er keine umlaute mehr obwohl im normalen Betrieb geht alles???

    io und thx erstmal mirwald
     
Thema:

Fehlercodes bei modemeinwahl

Die Seite wird geladen...

Fehlercodes bei modemeinwahl - Ähnliche Themen

  1. open suse 10.0 modemeinwahl

    open suse 10.0 modemeinwahl: hallo! ich ahbe problem mich mit dem modem ins internet einzuwählen. modem ist erkannt worden und provider ist installiert. wie wähle ich mich...