Textkonsole mit KMS zu klein

Dieses Thema im Forum "Arch Linux" wurde erstellt von plackets, 02.11.2009.

  1. #1 plackets, 02.11.2009
    Zuletzt bearbeitet: 14.11.2009
    plackets

    plackets Grünschnabel

    Dabei seit:
    06.07.2009
    Beiträge:
    3
    Zustimmungen:
    0
    KMS - X11 -> Einwandfrei, Textkonsole -> Bildschirm geht Standby

    Hallo Leute,
    kann mir hier bitte jemand sagen, wie ich auf meinem ArchLinux System mit dem nouveau Treiber und KMS die größe der Textkonsole verändern kann?

    Unter X11 funktioniert alles einwandfrei, aber die Textkonsole F1-F6 erstreckt sich nur über ca. ein Viertel meines Bildschirms. Mein Bildschirm sagt aber, dass beide unter der selben Auflösung und Bildwiederholfrequenz laufen --> KMS ist aktiv:

    Code:
    [ernst@myhost ~]$ cat /var/log/Xorg.0.log | grep modesetting
    (--) NOUVEAU(0): [drm] kernel modesetting in use
    ich bin ratlos, zumal die Textkonsole vorher in der selben auflösung mit uvesafb einwandfrei funktionierte. Hab uvesafb und den nvidia blob Treiber auch ordnungsgemäß deaktiviert.

    Danke für eure Hilfe

    Seit dem letzten Update von ArchLinux ist die Textkonsole ganz aus (der ganze Bildschirm geht in Standby). X11 funktioniert aber noch einwandfrei.

    Hier mal meine /var/log/Xorg.0.log

    Code:
    [root@myhost ernst]# cat /var/log/Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    
    X.Org X Server 1.7.1.901 (1.7.2 RC 1)
    Release Date: 2009-11-6
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.31-ARCH i686 
    Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
    Kernel command line: cryptdevice=/dev/sda7:root root=/dev/mapper/root ro
    Build Date: 08 November 2009  04:12:47PM
     
    Current version of pixman: 0.16.2
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 14 17:21:44 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AIGLX" "off"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    	/usr/share/fonts/misc,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled,
    	/usr/share/fonts/TTF,
    	/usr/share/fonts/Type1,
    	/usr/share/fonts/misc,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled,
    	/usr/share/fonts/TTF,
    	/usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x81e5d40
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 6.0
    	X.Org XInput driver : 7.0
    	X.Org Server Extension : 2.0
    (--) using VT number 7
    
    (--) PCI:*(0:1:0:0) 10de:0312:0000:0000 nVidia Corporation NV31 [GeForce FX 5600] rev 161, Mem @ 0xce000000/16777216, 0xb0000000/268435456, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 2.0
    (**) AIGLX disabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.1.0
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nouveau"
    (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    (II) Module nouveau: vendor="X.Org Foundation"
    	compiled for 1.7.1, module version = 0.0.10
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 6.0
    (II) NOUVEAU driver 
    (II) NOUVEAU driver for NVIDIA chipset families :
    	RIVA TNT    (NV04)
    	RIVA TNT2   (NV05)
    	GeForce 256 (NV10)
    	GeForce 2   (NV11, NV15)
    	GeForce 4MX (NV17, NV18)
    	GeForce 3   (NV20)
    	GeForce 4Ti (NV25, NV28)
    	GeForce FX  (NV3x)
    	GeForce 6   (NV4x)
    	GeForce 7   (G7x)
    	GeForce 8   (G8x)
    (II) Primary Device is: PCI 01@00:00:0
    (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
    (--) NOUVEAU(0): Chipset: "NVIDIA NV31"
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 6.0
    (II) NOUVEAU(0): Initializing int10
    (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
    (II) NOUVEAU(0): Loaded DRI module
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15
    (--) NOUVEAU(0): [drm] kernel modesetting in use
    (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    (==) NOUVEAU(0): RGB weight 888
    (==) NOUVEAU(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 6.0
    (==) NOUVEAU(0): Using HW cursor
    (--) NOUVEAU(0): Linear framebuffer at 0xB0000000
    (--) NOUVEAU(0): MMIO registers at 0xCE000000
    (II) NOUVEAU(0): Output VGA-0 using monitor section Monitor0
    (II) NOUVEAU(0): Output DVI-I-0 has no monitor section
    (II) NOUVEAU(0): Output TV-0 has no monitor section
    (II) NOUVEAU(0): EDID vendor "STC", prod id 5906
    (II) NOUVEAU(0): Using hsync ranges from config file
    (II) NOUVEAU(0): Using vrefresh ranges from config file
    (II) NOUVEAU(0): Printing DDC gathered Modelines:
    (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) NOUVEAU(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
    (II) NOUVEAU(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) NOUVEAU(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) NOUVEAU(0): Modeline "1280x1024"x0.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
    (II) NOUVEAU(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
    (II) NOUVEAU(0): Output VGA-0 connected
    (II) NOUVEAU(0): Output DVI-I-0 connected
    (II) NOUVEAU(0): Output TV-0 connected
    (II) NOUVEAU(0): Using user preference for initial modes
    (II) NOUVEAU(0): Output VGA-0 using initial mode 1280x1024
    (II) NOUVEAU(0): Output DVI-I-0 using initial mode 800x600
    (II) NOUVEAU(0): Output TV-0 using initial mode 1024x768
    (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) NOUVEAU(0): Initial CRTC_OWNER is 3
    (--) NOUVEAU(0): VideoRAM: 262144 kBytes
    (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 1280)
    (**) NOUVEAU(0):  Driver mode "1024x768": 54.2 MHz (scaled from 0.0 MHz), 40.3 kHz, 50.0 Hz
    (II) NOUVEAU(0): Modeline "1024x768"x50.0   54.16  1024 1064 1200 1344  768 768 777 806 -hsync -vsync (40.3 kHz)
    (**) NOUVEAU(0):  Driver mode "800x600": 32.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
    (II) NOUVEAU(0): Modeline "800x600"x50.0   32.14  800 840 920 1040  600 600 604 618 +hsync +vsync (30.9 kHz)
    (**) NOUVEAU(0):  Driver mode "720x480": 25.2 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
    (II) NOUVEAU(0): Modeline "720x480"x50.0   25.20  720 752 872 960  480 480 493 525 -hsync -vsync (26.2 kHz)
    (**) NOUVEAU(0):  Driver mode "640x480": 23.1 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
    (II) NOUVEAU(0): Modeline "640x480"x50.0   23.10  640 672 768 880  480 480 492 525 -hsync -vsync (26.2 kHz)
    (**) NOUVEAU(0):  Driver mode "720x576": 28.7 MHz (scaled from 0.0 MHz), 29.9 kHz, 50.0 Hz
    (II) NOUVEAU(0): Modeline "720x576"x50.0   28.66  720 776 856 960  576 576 588 597 -hsync -vsync (29.9 kHz)
    (**) NOUVEAU(0): Display dimensions: (320, 240) mm
    (**) NOUVEAU(0): DPI set to (101, 108)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules/libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 2.5.0
    	ABI class: X.Org Video Driver, version 6.0
    (II) Loading sub module "shadowfb"
    (II) LoadModule: "shadowfb"
    (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    (II) Module shadowfb: vendor="X.Org Foundation"
    	compiled for 1.7.1.901, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (--) Depth 24 pixmap format is 32 bpp
    (II) NOUVEAU(0): Opened GPU channel 1
    (II) NOUVEAU(0): [DRI2] Setup complete
    (II) NOUVEAU(0): AGPGART: 64MiB available
    (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
    (II) EXA(0): Driver allocated offscreen pixmaps
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (II)         UploadToScreen
    (II)         DownloadFromScreen
    (==) NOUVEAU(0): Backing store disabled
    (==) NOUVEAU(0): Silken mouse enabled
    (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
    (II) NOUVEAU(0): [XvMC] Extension initialized.
    (II) NOUVEAU(0): NVEnterVT is called.
    (**) NOUVEAU(0): DPMS enabled
    (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    record: RECORD extension enabled at configure time.
    record: This extension is known to be broken, disabling extension now..
    record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) NOUVEAU(0): Setting screen physical size to 338 x 270
    resize called 1280 1024
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    	compiled for 1.7.0.901, module version = 2.3.0
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
    (**) ImExPS/2 Generic Explorer Mouse: always reports core events
    (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
    (II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
    (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
    (II) ImExPS/2 Generic Explorer Mouse: Found relative axes
    (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
    (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
    (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
    (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
    (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
    (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
    (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_variant" "nodeadkeys"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_variant" "nodeadkeys"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "de"
    (**) Option "xkb_variant" "nodeadkeys"
    (II) NOUVEAU(0): NVLeaveVT is called.
    (II) NOUVEAU(0): NVEnterVT is called.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) ImExPS/2 Generic Explorer Mouse: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    Und dmesg sagt mir:

    Code:
    [root@myhost ernst]# dmesg
    Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
    KERNEL supported cpus:
      Intel GenuineIntel
      AMD AuthenticAMD
      NSC Geode by NSC
      Cyrix CyrixInstead
      Centaur CentaurHauls
      Transmeta GenuineTMx86
      Transmeta TransmetaCPU
      UMC UMC UMC UMC
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
     BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
     BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
     BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
     BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    DMI 2.3 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
      00000-9FFFF write-back
      A0000-BFFFF uncachable
      C0000-DFFFF write-protect
      E0000-EFFFF uncachable
      F0000-FFFFF write-protect
    MTRR variable ranges enabled:
      0 base 000000000 mask FE0000000 write-back
      1 disabled
      2 disabled
      3 disabled
      4 disabled
      5 disabled
      6 disabled
      7 base 0D0000000 mask FF0000000 write-combining
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
     modified: 0000000000000000 - 0000000000010000 (reserved)
     modified: 0000000000010000 - 000000000009fc00 (usable)
     modified: 000000000009fc00 - 00000000000a0000 (reserved)
     modified: 00000000000f0000 - 0000000000100000 (reserved)
     modified: 0000000000100000 - 000000001fff0000 (usable)
     modified: 000000001fff0000 - 000000001fff8000 (ACPI data)
     modified: 000000001fff8000 - 0000000020000000 (ACPI NVS)
     modified: 00000000fec00000 - 00000000fec01000 (reserved)
     modified: 00000000fee00000 - 00000000fee01000 (reserved)
     modified: 00000000ffee0000 - 00000000fff00000 (reserved)
     modified: 00000000fffc0000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-000000001fff0000
     0000000000 - 0000400000 page 4k
     0000400000 - 001fc00000 page 2M
     001fc00000 - 001fff0000 page 4k
    kernel direct mapping tables up to 1fff0000 @ 10000-15000
    RAMDISK: 1fe01000 - 1ffdf712
    ACPI: RSDP 000fab70 00014 (v00 AMI   )
    ACPI: RSDT 1fff0000 0002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
    ACPI: FACP 1fff0030 00081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B)
    ACPI: DSDT 1fff0120 032D2 (v01    SiS      746 00000100 INTL 02002024)
    ACPI: FACS 1fff8000 00040
    ACPI: APIC 1fff00c0 0005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
    ACPI: Local APIC address 0xfee00000
    0MB HIGHMEM available.
    511MB LOWMEM available.
      mapped low ram: 0 - 1fff0000
      low ram: 0 - 1fff0000
      node 0 low ram: 00000000 - 1fff0000
      node 0 bootmap 00011000 - 00015000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
      #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
      #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
      #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
      #3 [0001000000 - 000156da44]    TEXT DATA BSS ==> [0001000000 - 000156da44]
      #4 [001fe01000 - 001ffdf712]          RAMDISK ==> [001fe01000 - 001ffdf712]
      #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
      #6 [000156e000 - 00015740c4]              BRK ==> [000156e000 - 00015740c4]
      #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
      #8 [0000011000 - 0000015000]          BOOTMAP ==> [0000011000 - 0000015000]
    Zone PFN ranges:
      DMA      0x00000010 -> 0x00001000
      Normal   0x00001000 -> 0x0001fff0
      HighMem  0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
        0: 0x00000010 -> 0x0000009f
        0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130943
    free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575200
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 3951 pages, LIFO batch:0
      Normal zone: 992 pages used for memmap
      Normal zone: 125968 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 14 pages at c1977000, static data 34332 bytes
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129919
    Kernel command line: cryptdevice=/dev/sda7:root root=/dev/mapper/root ro
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    Initializing HighMem for node 0 (00000000:00000000)
    Memory: 511524k/524224k available (3111k kernel code, 12084k reserved, 1120k data, 416k init, 0k highmem)
    virtual kernel memory layout:
        fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
        lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
          .init : 0xc1422000 - 0xc148a000   ( 416 kB)
          .data : 0xc1309ddd - 0xc1421ea8   (1120 kB)
          .text : 0xc1000000 - 0xc1309ddd   (3111 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    NR_IRQS:512
    Fast TSC calibration using PIT
    Detected 2186.615 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4374.44 BogoMIPS (lpj=7288716)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    mce: CPU supports 4 MCE banks
    Performance Counters: AMD PMU driver.
    ... version:                 0
    ... bit width:               48
    ... generic counters:        4
    ... value mask:              0000ffffffffffff
    ... max period:              00007fffffffffff
    ... fixed-purpose counters:  0
    ... counter mask:            000000000000000f
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    ACPI: Core revision 20090521
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Athlon(tm) XP 3000+ stepping 00
    Brought up 1 CPUs
    Total of 1 processors activated (4374.44 BogoMIPS).
    CPU0 attaching NULL sched-domain.
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:00:02.0: Enabling SiS 96x SMBus
    pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
    pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f]
    pci 0000:00:02.7: reg 10 io port: [0xdc00-0xdcff]
    pci 0000:00:02.7: reg 14 io port: [0xd800-0xd87f]
    pci 0000:00:02.7: supports D1 D2
    pci 0000:00:02.7: PME# supported from D3hot D3cold
    pci 0000:00:02.7: PME# disabled
    pci 0000:00:03.0: reg 10 32bit mmio: [0xcfffd000-0xcfffdfff]
    pci 0000:00:03.1: reg 10 32bit mmio: [0xcfffe000-0xcfffefff]
    pci 0000:00:03.2: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
    pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
    pci 0000:00:04.0: reg 14 32bit mmio: [0xcfffc000-0xcfffcfff]
    pci 0000:00:04.0: reg 30 32bit mmio: [0xcffc0000-0xcffdffff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
    pci 0000:01:00.0: reg 14 32bit mmio: [0xb0000000-0xbfffffff]
    pci 0000:01:00.0: reg 30 32bit mmio: [0xcfee0000-0xcfefffff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcdd00000-0xcfefffff]
    pci 0000:00:01.0: bridge 32bit mmio pref: [0xada00000-0xcdbfffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    system 00:01: ioport range 0x295-0x296 has been reserved
    system 00:01: ioport range 0x800-0x87f has been reserved
    system 00:01: ioport range 0x880-0x8ff has been reserved
    system 00:01: ioport range 0xc00-0xc1f has been reserved
    system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0:   IO window: disabled
    pci 0000:00:01.0:   MEM window: 0xcdd00000-0xcfefffff
    pci 0000:00:01.0:   PREFETCH window: 0xada00000-0xcdbfffff
    pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 1 mem: [0xcdd00000-0xcfefffff]
    pci_bus 0000:01: resource 2 pref mem [0xada00000-0xcdbfffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 1913k freed
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1258141588.176:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1003
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 416k freed
    Linux agpgart interface v0.103
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [drm] Initialized drm 1.1.0 20060810
    nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031200a1)
    [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
    Switched to high resolution mode on CPU 0
    [drm] nouveau 0000:01:00.0: ... appears to be valid
    [drm] nouveau 0000:01:00.0: BMP BIOS found
    [drm] nouveau 0000:01:00.0: BMP version 5.39
    [drm] nouveau 0000:01:00.0: Bios version 04.31.20.38
    [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
    [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
    [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
    [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 03010312 00000000
    [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000003
    [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE3C0
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE712
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE875
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE9E5
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA02
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xEA1F
    [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xEBFE
    [TTM] Zone  kernel: Available graphics memory: 257016 kiB.
    [drm] nouveau 0000:01:00.0: 256 MiB VRAM
    [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
    [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
    [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
    [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
    [drm] nouveau 0000:01:00.0: Detected a VGA connector
    [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
    [drm] nouveau 0000:01:00.0: Detected a TV connector
    [drm] nouveau 0000:01:00.0: Saving VGA fonts
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: allocated 800x600 fb: 0x49000, bo dedaaf00
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
    [drm] nouveau 0000:01:00.0: vpll: n1 25 n2 4 m1 6 m2 1 log2p 3
    [drm] DAC-8: set mode 800x600 40
    [drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
    [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
    [drm] nouveau 0000:01:00.0: vpll: n1 16 n2 5 m1 3 m2 1 log2p 3
    [drm] TV-10: set mode 720x576 41
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
    Console: switching to colour frame buffer device 90x36
    fb0: nouveaufb frame buffer device
    registered panic notifier
    [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_sis 0000:00:02.5: version 0.5.2
    scsi0 : pata_sis
    scsi1 : pata_sis
    ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    ata1.00: ATA-6: ST3160021A, 3.06, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48 
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access     ATA      ST3160021A       3.06 PQ: 0 ANSI: 5
    ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202J, SB02, max UDMA/66
    ata2.00: limited to UDMA/33 due to 40-wire cable
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S202J  SB02 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    padlock: VIA PadLock not detected.
    EXT4-fs (dm-0): barriers enabled
    kjournald2 starting: pid 496, dev dm-0:8, commit interval 5 seconds
    EXT4-fs (dm-0): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (dm-0): mounted filesystem with ordered data mode
    rtc_cmos 00:03: RTC can wake from S4
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, 114 bytes nvram
    udev: starting version 146
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 917kHz
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    processor LNXCPU:00: registered as cooling_device0
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    ACPI: Power Button [PWRB]
    lp: driver loaded but no devices found
    parport_pc 00:0a: reported by Plug and Play ACPI
    parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    psmouse serio1: ID: 10 00 64
    input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
    agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    agpgart-sis 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
    ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    usbcore: registered new device driver usb
    sis900.c: v1.08.10 Apr. 2 2006
    sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
    0000:00:04.0: Using transceiver found at address 1 as default
    eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 19, 00:0c:6e:10:95:97
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:03.2: EHCI Host Controller
    ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:03.2: cache line size of 64 is not supported
    ehci_hcd 0000:00:03.2: irq 23, io mem 0xcffff000
    ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:03.0: OHCI Host Controller
    ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:03.0: irq 20, io mem 0xcfffd000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    ohci_hcd 0000:00:03.1: OHCI Host Controller
    ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffe000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 3 ports detected
    usb 3-1: new full speed USB device using ohci_hcd and address 2
    Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    usb 3-1: configuration #1 chosen from 1 choice
    usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
    usbcore: registered new interface driver usblp
    usb 3-2: new full speed USB device using ohci_hcd and address 3
    intel8x0_measure_ac97_clock: measured 50792 usecs (2444 samples)
    intel8x0: clocking to 48000
    usb 3-2: configuration #1 chosen from 1 choice
    EXT4-fs (dm-0): internal journal on dm-0:8
    EXT4-fs (sda5): barriers enabled
    kjournald2 starting: pid 971, dev sda5:8, commit interval 5 seconds
    EXT4-fs (sda5): internal journal on sda5:8
    EXT4-fs (sda5): delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs (sda5): mounted filesystem with ordered data mode
    Adding 1052216k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:1052216k 
    eth0: Media Link On 100mbps full-duplex 
    w83627hf: Found W83697HF chip at 0x290
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
    [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
    [drm] nouveau 0000:01:00.0: vpll: n1 14 n2 5 m1 3 m2 1 log2p 2
    [drm] DAC-7: set mode 1280x1024 42
    [drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 0
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
    [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
    [drm] nouveau 0000:01:00.0: vpll: n1 16 n2 5 m1 3 m2 1 log2p 3
    [drm] TV-10: set mode 1024x768 43
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
    eth0: no IPv6 routers present
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
    [drm] nouveau 0000:01:00.0: vpll: n1 25 n2 4 m1 6 m2 1 log2p 3
    [drm] DAC-8: set mode 800x600 40
    [drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 1)
    [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output B
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
    [drm] nouveau 0000:01:00.0: vpll: n1 16 n2 5 m1 3 m2 1 log2p 3
    [drm] TV-10: set mode 720x576 41
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
    [drm] nouveau 0000:01:00.0: vpll: n1 14 n2 5 m1 3 m2 1 log2p 2
    [drm] DAC-7: set mode  44
    [drm] nouveau 0000:01:00.0: nv04_dac_mode_set called for encoder 0
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
    [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
    [drm] nouveau 0000:01:00.0: vpll: n1 16 n2 5 m1 3 m2 1 log2p 3
    [drm] TV-10: set mode 800x600 45
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 1
    [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on TV encoder (output 3)
    [drm] nouveau 0000:01:00.0: Output TV-1 is running on CRTC 1 using output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    [drm] nouveau 0000:01:00.0: Load detected on output B
    Danke
    euer pklackts
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 Finest Bug, 30.01.2010
    Finest Bug

    Finest Bug FreakydicA

    Dabei seit:
    25.01.2010
    Beiträge:
    11
    Zustimmungen:
    0
Thema:

Textkonsole mit KMS zu klein

Die Seite wird geladen...

Textkonsole mit KMS zu klein - Ähnliche Themen

  1. Zeichencodierung Textkonsole squeeze

    Zeichencodierung Textkonsole squeeze: So, ich weiss wieder mal nicht weiter. Die Textkonsole unter squeeze gibt mir Rätsel auf. Bis zur Lenny habe ich die Konsolenauflösung im...
  2. Textkonsole auf F1 abgestürzt

    Textkonsole auf F1 abgestürzt: Hallo liebes Forum, hat jemand von euch eine Ahnung, wie ich die Textkonsole auf F1 neustarte? Die ist nach dem Beenden eines Shellskripts...
  3. Textkonsole

    Textkonsole: Hab mal zwei, drei kleinere Fragen die ich durch die Suchfunktion nicht gefunden habe. Ich wollt mal Fragen wie man die "Begrüßungsmeldung" in...
  4. zu Textkonsolen wechseln....

    zu Textkonsolen wechseln....: Seit meinem Wechsel von suse 8.0 zu 8.1 kann ich nicht mehr mit den Tastenkombis Alt + F1......usw. in die Terminals wechseln. Daher nehme ich...
  5. Kleinigkeiten für Euch, mich nicht :-) pkg_add ; DVD rw mounten

    Kleinigkeiten für Euch, mich nicht :-) pkg_add ; DVD rw mounten: Hallo, ich habe 2 Problemchen. Ich kann nichts mehr installieren. Ich brauche aber unbedingt ein Brenn-Programm. Ein schönen Partitionierer usw....