Problem mit PCI

Dieses Thema im Forum "Sonstiges" wurde erstellt von Wicked, 03.10.2007.

  1. Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
    Moin moin an alle hardware spezies^^
    habe ein merkwürdiges problem:
    wenn meine pci-tv karte steckt werden auf einmal meine LanKarten (sowohl onboard als auch die 2te PCI karte) nicht mehr erkannt.
    welche ursachen kann das haben????
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. Mike1

    Mike1 Niederösterreicher

    Dabei seit:
    21.12.2006
    Beiträge:
    1.376
    Zustimmungen:
    0
    Ort:
    Österreich
    woran genau es liegt weiß ich auch nicht, es kann aber vorkommen. Am besten mal nen andren PCI-Steckplatz probieren falls die Möglichkeit besteht.
     
  4. #3 Wicked, 03.10.2007
    Zuletzt bearbeitet: 03.10.2007
    Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
    vielleicht liegts auch an spannungswechslern oder spannungsausgleichern...ich hab nämlich keinen anderen pc wo ich das testen könnte vllt hat die karte ja nen kurzen irgentwo in der pci brücke verursacht
     
  5. #4 Athur Dent, 03.10.2007
    Athur Dent

    Athur Dent Handtuchhalter

    Dabei seit:
    08.12.2006
    Beiträge:
    662
    Zustimmungen:
    0
    Ort:
    Hannover
    Ich kann Dir leider auch nicht direkt helfen, aber ich denke mehr Informationen wären sicherlich sinnvoll (mir fehlt hier auch die Erfahrung).

    Welche TV- Lankarte und welcher onboard Lanchip? Welches OS, welcher Kernel?

    Hast Du schon verschiedene Bootconfigurationen (nur TV ohne Lan, TV nur Lan Chip usw.) ausprobiert?

    Poste mal die Ausgabe von:
    (Befehl)
    Code:
    lspci
    (Datei)
    Code:
    /var/log/messages
    Benutzt Du auch Windows? Besteht dort auch das Problem?
     
  6. Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
    jaja die infos werden dir nix nützen da das problem selbst im bios auftriit es ist also definitiv ein hardware problem.
    ich nutze ubuntu studios und windows xp media center edition
    da ich im mom auf windows bin um das problem hier zu lösen kann ich dir die ausgaben im mom net posten sry

    die lan karten laufen über den Realtek Semiconductor Corp. treiber kp welcher chip dahinter steckt warn komplett system und komme hier an keine infos
     
  7. Mike1

    Mike1 Niederösterreicher

    Dabei seit:
    21.12.2006
    Beiträge:
    1.376
    Zustimmungen:
    0
    Ort:
    Österreich
    Meine Soundkarte wollte schon auf mehreren Boards nicht im untersten PCI-Slot, darum einfach meinen Tipp von vorhin befolgen und mal andren PCI-Slot probieren...
     
  8. #7 Wicked, 03.10.2007
    Zuletzt bearbeitet: 03.10.2007
    Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
     
  9. #8 Athur Dent, 03.10.2007
    Athur Dent

    Athur Dent Handtuchhalter

    Dabei seit:
    08.12.2006
    Beiträge:
    662
    Zustimmungen:
    0
    Ort:
    Hannover
    Das hört sich schon schlecht an.

    Da bleiben ja gerade noch "Biosupdate" und "Firmware updaten" UND OB DAS HILFT IST AUCH FRAGLICH.
     
  10. #9 Wicked, 03.10.2007
    Zuletzt bearbeitet: 03.10.2007
    Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
    wicked@ubuntu:~$ lspci
    00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
    00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
    00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    01:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
    01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    06:00.0 VGA compatible controller: ATI Technologies Inc R430 [Radeon X800 (PCIE)]
    06:00.1 Display controller: ATI Technologies Inc R430 [Radeon X800 (PCIE) Secondary]

    Oct 3 19:56:40 ubuntu syslogd 1.4.1#20ubuntu4: restart.
    Oct 3 19:56:40 ubuntu kernel: Inspecting /boot/System.map-2.6.20-15-lowlatency
    Oct 3 19:56:41 ubuntu kernel: Loaded 24997 symbols from /boot/System.map-2.6.20-15-lowlatency.
    Oct 3 19:56:41 ubuntu kernel: Symbols match kernel version 2.6.20.
    Oct 3 19:56:41 ubuntu kernel: No module symbols loaded - kernel modules not enabled.
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Linux version 2.6.20-15-lowlatency (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP PREEMPT Sun Apr 15 07:39:03 UTC 2007 (Ubuntu Unofficial)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-provided physical RAM map:
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] sanitize start
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] sanitize end
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() type is E820_RAM
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fec0000 end: 000000003ffc0000 type: 1
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() type is E820_RAM
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 000000000000e000 end: 000000003ffce000 type: 3
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 000000003ffce000 size: 0000000000022000 end: 000000003fff0000 type: 4
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000 end: 0000000040000000 type: 2
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] 127MB HIGHMEM available.
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] 896MB LOWMEM available.
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] found SMP MP-table at 000ff780
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Zone PFN ranges:
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] DMA 0 -> 4096
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Normal 4096 -> 229376
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] HighMem 229376 -> 262080
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] early_node_map[1] active PFN ranges
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] 0: 0 -> 262080
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] DMI 2.3 present.
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Processor #0 15:4 APIC version 20
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Processor #1 15:4 APIC version 20
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
    Oct 3 19:56:41 ubuntu kernel: [ 0.000000] Detected 3591.235 MHz processor.
    Oct 3 19:56:41 ubuntu kernel: [ 30.098983] Built 1 zonelists. Total pages: 260033
    Oct 3 19:56:41 ubuntu kernel: [ 30.098987] Kernel command line: find=/wubi/boot/linux ro quiet splash
    Oct 3 19:56:41 ubuntu kernel: [ 30.099122] Enabling fast FPU save and restore... done.
    Oct 3 19:56:41 ubuntu kernel: [ 30.099125] Enabling unmasked SIMD FPU exception support... done.
    Oct 3 19:56:41 ubuntu kernel: [ 30.099132] Initializing CPU#0
    Oct 3 19:56:41 ubuntu kernel: [ 30.099186] PID hash table entries: 4096 (order: 12, 16384 bytes)
    Oct 3 19:56:41 ubuntu kernel: [ 30.100165] Console: colour VGA+ 80x25
    Oct 3 19:56:41 ubuntu kernel: [ 30.100475] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Oct 3 19:56:41 ubuntu kernel: [ 30.100777] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118322] Memory: 1027340k/1048320k available (2018k kernel code, 20264k reserved, 898k data, 328k init, 130816k highmem)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118330] virtual kernel memory layout:
    Oct 3 19:56:41 ubuntu kernel: [ 30.118331] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118332] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118333] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118334] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118335] .init : 0xc03df000 - 0xc0431000 ( 328 kB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118335] .data : 0xc02f8b15 - 0xc03d96d4 ( 898 kB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118336] .text : 0xc0100000 - 0xc02f8b15 (2018 kB)
    Oct 3 19:56:41 ubuntu kernel: [ 30.118339] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Oct 3 19:56:41 ubuntu kernel: [ 30.178136] Calibrating delay using timer specific routine.. 7185.54 BogoMIPS (lpj=3592771)
    Oct 3 19:56:41 ubuntu kernel: [ 30.178176] Security Framework v1.0.0 initialized
    Oct 3 19:56:41 ubuntu kernel: [ 30.178181] SELinux: Disabled at boot.
    Oct 3 19:56:41 ubuntu kernel: [ 30.178197] Mount-cache hash table entries: 512
    Oct 3 19:56:41 ubuntu kernel: [ 30.178325] monitor/mwait feature present.
    Oct 3 19:56:41 ubuntu kernel: [ 30.178327] using mwait in idle threads.
    Oct 3 19:56:41 ubuntu kernel: [ 30.178333] CPU: Trace cache: 12K uops, L1 D cache: 16K
    Oct 3 19:56:41 ubuntu kernel: [ 30.178335] CPU: L2 cache: 1024K
    Oct 3 19:56:41 ubuntu kernel: [ 30.178337] CPU: Physical Processor ID: 0
    Oct 3 19:56:41 ubuntu kernel: [ 30.178349] Compat vDSO mapped to ffffe000.
    Oct 3 19:56:41 ubuntu kernel: [ 30.178352] Remapping vsyscall page to ffffe000
    Oct 3 19:56:41 ubuntu kernel: [ 30.178365] Checking 'hlt' instruction... OK.
    Oct 3 19:56:41 ubuntu kernel: [ 30.182226] SMP alternatives: switching to UP code
    Oct 3 19:56:41 ubuntu kernel: [ 30.182512] Early unpacking initramfs... done
    Oct 3 19:56:41 ubuntu kernel: [ 30.431799] ACPI: Core revision 20060707
    Oct 3 19:56:41 ubuntu kernel: [ 30.431933] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
    Oct 3 19:56:41 ubuntu kernel: [ 30.444846] CPU0: Intel(R) Pentium(R) 4 CPU 3.60GHz stepping 01
    Oct 3 19:56:41 ubuntu kernel: [ 30.444865] SMP alternatives: switching to SMP code
    Oct 3 19:56:41 ubuntu kernel: [ 30.444955] Booting processor 1/1 eip 3000
    Oct 3 19:56:41 ubuntu kernel: [ 30.455307] Initializing CPU#1
    Oct 3 19:56:41 ubuntu kernel: [ 30.515896] Calibrating delay using timer specific routine.. 7181.02 BogoMIPS (lpj=3590510)
    Oct 3 19:56:41 ubuntu kernel: [ 30.515911] monitor/mwait feature present.
    Oct 3 19:56:41 ubuntu kernel: [ 30.515917] CPU: Trace cache: 12K uops, L1 D cache: 16K
    Oct 3 19:56:41 ubuntu kernel: [ 30.515919] CPU: L2 cache: 1024K
    Oct 3 19:56:41 ubuntu kernel: [ 30.515922] CPU: Physical Processor ID: 0
    Oct 3 19:56:41 ubuntu kernel: [ 30.516170] CPU1: Intel(R) Pentium(R) 4 CPU 3.60GHz stepping 01
    Oct 3 19:56:41 ubuntu kernel: [ 30.516206] Total of 2 processors activated (14366.56 BogoMIPS).
    Oct 3 19:56:41 ubuntu kernel: [ 30.516351] ENABLING IO-APIC IRQs
    Oct 3 19:56:41 ubuntu kernel: [ 30.516526] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Oct 3 19:56:41 ubuntu kernel: [ 30.627829] checking TSC synchronization across 2 CPUs: passed.
    Oct 3 19:56:41 ubuntu kernel: [ 0.000997] Brought up 2 CPUs
    Oct 3 19:56:41 ubuntu kernel: [ 0.079565] migration_cost=44
    Oct 3 19:56:41 ubuntu kernel: [ 0.079819] Booting paravirtualized kernel on bare hardware
    Oct 3 19:56:41 ubuntu kernel: [ 0.079893] Time: 19:56:08 Date: 09/03/107
    Oct 3 19:56:41 ubuntu kernel: [ 0.079921] NET: Registered protocol family 16
    Oct 3 19:56:41 ubuntu kernel: [ 0.080014] EISA bus registered
    Oct 3 19:56:41 ubuntu kernel: [ 0.080019] ACPI: bus type pci registered
    Oct 3 19:56:41 ubuntu kernel: [ 0.080276] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=6
    Oct 3 19:56:41 ubuntu kernel: [ 0.080278] PCI: Using configuration type 1
    Oct 3 19:56:41 ubuntu kernel: [ 0.080279] Setting up standard PCI resources
    Oct 3 19:56:41 ubuntu kernel: [ 0.094207] ACPI: Interpreter enabled
    Oct 3 19:56:41 ubuntu kernel: [ 0.094210] ACPI: Using IOAPIC for interrupt routing
    Oct 3 19:56:41 ubuntu kernel: [ 0.095205] ACPI: PCI Root Bridge [PCI0] (0000:00)
    Oct 3 19:56:41 ubuntu kernel: [ 0.095941] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    Oct 3 19:56:41 ubuntu kernel: [ 0.095945] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    Oct 3 19:56:41 ubuntu kernel: [ 0.096806] PCI: Transparent bridge - 0000:00:1e.0
    Oct 3 19:56:42 ubuntu kernel: [ 0.105560] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.105794] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.106037] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.106264] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.106489] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.106713] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.106947] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.107170] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Oct 3 19:56:42 ubuntu kernel: [ 0.107265] Linux Plug and Play Support v0.97 (c) Adam Belay
    Oct 3 19:56:42 ubuntu kernel: [ 0.107275] pnp: PnP ACPI init
    Oct 3 19:56:42 ubuntu kernel: [ 0.111069] pnp: PnP ACPI: found 16 devices
    Oct 3 19:56:42 ubuntu kernel: [ 0.111074] PnPBIOS: Disabled by ACPI PNP
    Oct 3 19:56:42 ubuntu kernel: [ 0.111122] PCI: Using ACPI for IRQ routing
    Oct 3 19:56:42 ubuntu kernel: [ 0.111125] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    Oct 3 19:56:42 ubuntu kernel: [ 0.128463] NET: Registered protocol family 8
    Oct 3 19:56:42 ubuntu kernel: [ 0.128465] NET: Registered protocol family 20
    Oct 3 19:56:42 ubuntu kernel: [ 0.129233] pnp: 00:07: ioport range 0x290-0x297 has been reserved
    Oct 3 19:56:42 ubuntu kernel: [ 0.129575] PCI: Bridge: 0000:00:01.0
    Oct 3 19:56:42 ubuntu kernel: [ 0.129579] IO window: e000-efff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129583] MEM window: cff00000-cfffffff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129586] PREFETCH window: d0000000-dfffffff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129589] PCI: Bridge: 0000:00:1c.0
    Oct 3 19:56:42 ubuntu kernel: [ 0.129592] IO window: d000-dfff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129596] MEM window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129599] PREFETCH window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129603] PCI: Bridge: 0000:00:1c.1
    Oct 3 19:56:42 ubuntu kernel: [ 0.129606] IO window: c000-cfff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129610] MEM window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129613] PREFETCH window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129617] PCI: Bridge: 0000:00:1c.2
    Oct 3 19:56:42 ubuntu kernel: [ 0.129620] IO window: b000-bfff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129624] MEM window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129627] PREFETCH window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129631] PCI: Bridge: 0000:00:1c.3
    Oct 3 19:56:42 ubuntu kernel: [ 0.129634] IO window: a000-afff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129638] MEM window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129641] PREFETCH window: disabled.
    Oct 3 19:56:42 ubuntu kernel: [ 0.129647] PCI: Bridge: 0000:00:1e.0
    Oct 3 19:56:42 ubuntu kernel: [ 0.129649] IO window: 9000-9fff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129654] MEM window: cfe00000-cfefffff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129657] PREFETCH window: 50000000-500fffff
    Oct 3 19:56:42 ubuntu kernel: [ 0.129673] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    Oct 3 19:56:42 ubuntu kernel: [ 0.129695] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    Oct 3 19:56:42 ubuntu kernel: [ 0.129717] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
    Oct 3 19:56:42 ubuntu kernel: [ 0.129738] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    Oct 3 19:56:42 ubuntu kernel: [ 0.129760] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
    Oct 3 19:56:42 ubuntu kernel: [ 0.129807] NET: Registered protocol family 2
    Oct 3 19:56:42 ubuntu kernel: [ 0.142966] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    Oct 3 19:56:42 ubuntu kernel: [ 0.143103] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    Oct 3 19:56:42 ubuntu kernel: [ 0.143771] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    Oct 3 19:56:42 ubuntu kernel: [ 0.144169] TCP: Hash tables configured (established 131072 bind 65536)
    Oct 3 19:56:42 ubuntu kernel: [ 0.144172] TCP reno registered
    Oct 3 19:56:42 ubuntu kernel: [ 0.147076] checking if image is initramfs... it is
    Oct 3 19:56:42 ubuntu kernel: [ 0.638313] Freeing initrd memory: 7506k freed
    Oct 3 19:56:42 ubuntu kernel: [ 0.638883] audit: initializing netlink socket (disabled)
    Oct 3 19:56:42 ubuntu kernel: [ 0.638898] audit(1191441368.352:1): initialized
    Oct 3 19:56:42 ubuntu kernel: [ 0.638996] highmem bounce pool size: 64 pages
    Oct 3 19:56:42 ubuntu kernel: [ 0.639087] VFS: Disk quotas dquot_6.5.1
    Oct 3 19:56:42 ubuntu kernel: [ 0.639106] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Oct 3 19:56:42 ubuntu kernel: [ 0.639153] io scheduler noop registered
    Oct 3 19:56:42 ubuntu kernel: [ 0.639156] io scheduler anticipatory registered
    Oct 3 19:56:42 ubuntu kernel: [ 0.639158] io scheduler deadline registered
    Oct 3 19:56:42 ubuntu kernel: [ 0.639169] io scheduler cfq registered (default)
    Oct 3 19:56:42 ubuntu kernel: [ 0.639415] assign_interrupt_mode Found MSI capability
    Oct 3 19:56:42 ubuntu kernel: [ 0.639555] assign_interrupt_mode Found MSI capability
    Oct 3 19:56:42 ubuntu kernel: [ 0.639783] assign_interrupt_mode Found MSI capability
    Oct 3 19:56:42 ubuntu kernel: [ 0.639960] assign_interrupt_mode Found MSI capability
    Oct 3 19:56:42 ubuntu kernel: [ 0.640137] assign_interrupt_mode Found MSI capability
    Oct 3 19:56:42 ubuntu kernel: [ 0.640343] isapnp: Scanning for PnP cards...
    Oct 3 19:56:42 ubuntu kernel: [ 0.994830] isapnp: No Plug & Play device found
    Oct 3 19:56:42 ubuntu kernel: [ 1.019558] Real Time Clock Driver v1.12ac
    Oct 3 19:56:42 ubuntu kernel: [ 1.019608] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    Oct 3 19:56:42 ubuntu kernel: [ 1.019726] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Oct 3 19:56:42 ubuntu kernel: [ 1.020342] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Oct 3 19:56:42 ubuntu kernel: [ 1.020542] mice: PS/2 mouse device common for all mice
    Oct 3 19:56:42 ubuntu kernel: [ 1.021131] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    Oct 3 19:56:42 ubuntu kernel: [ 1.021279] input: Macintosh mouse button emulation as /class/input/input0
    Oct 3 19:56:42 ubuntu kernel: [ 1.021325] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Oct 3 19:56:42 ubuntu kernel: [ 1.021329] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Oct 3 19:56:42 ubuntu kernel: [ 1.021567] PNP: No PS/2 controller found. Probing ports directly.
    Oct 3 19:56:42 ubuntu kernel: [ 1.024676] serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 3 19:56:42 ubuntu kernel: [ 1.024681] serio: i8042 AUX port at 0x60,0x64 irq 12
    Oct 3 19:56:42 ubuntu kernel: [ 1.024775] EISA: Probing bus 0 at eisa.0
    Oct 3 19:56:42 ubuntu kernel: [ 1.024799] Cannot allocate resource for EISA slot 7
    Oct 3 19:56:42 ubuntu kernel: [ 1.024801] Cannot allocate resource for EISA slot 8
    Oct 3 19:56:42 ubuntu kernel: [ 1.024803] EISA: Detected 0 cards.
    Oct 3 19:56:42 ubuntu kernel: [ 1.054865] TCP cubic registered
    Oct 3 19:56:42 ubuntu kernel: [ 1.054876] NET: Registered protocol family 1
    Oct 3 19:56:42 ubuntu kernel: [ 1.054897] Starting balanced_irq
    Oct 3 19:56:42 ubuntu kernel: [ 1.054904] Using IPI No-Shortcut mode
    Oct 3 19:56:42 ubuntu kernel: [ 1.054976] ACPI: (supports S0 S1 S3 S4 S5)
    Oct 3 19:56:42 ubuntu kernel: [ 1.055017] Magic number: 11:156:950
    Oct 3 19:56:42 ubuntu kernel: [ 1.055033] hash matches device ttya5
    Oct 3 19:56:42 ubuntu kernel: [ 1.055123] hash matches device tty7
    Oct 3 19:56:42 ubuntu kernel: [ 1.055245] Time: tsc clocksource has been installed.
    Oct 3 19:56:42 ubuntu kernel: [ 1.055310] Freeing unused kernel memory: 328k freed
    Oct 3 19:56:42 ubuntu kernel: [ 2.239843] md: raid1 personality registered for level 1
    Oct 3 19:56:42 ubuntu kernel: [ 2.243344] md: raid0 personality registered for level 0
    Oct 3 19:56:42 ubuntu kernel: [ 2.248163] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    Oct 3 19:56:42 ubuntu kernel: [ 2.262579] SCSI subsystem initialized
    Oct 3 19:56:42 ubuntu kernel: [ 2.282513] usbcore: registered new interface driver usbfs
    Oct 3 19:56:42 ubuntu kernel: [ 2.282553] usbcore: registered new interface driver hub
    Oct 3 19:56:42 ubuntu kernel: [ 2.282602] usbcore: registered new device driver usb
    Oct 3 19:56:42 ubuntu kernel: [ 2.283489] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
    Oct 3 19:56:42 ubuntu kernel: [ 2.283503] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    Oct 3 19:56:42 ubuntu kernel: [ 2.283560] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    Oct 3 19:56:42 ubuntu kernel: [ 2.283590] ehci_hcd 0000:00:1d.7: debug port 1
    Oct 3 19:56:42 ubuntu kernel: [ 2.283604] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfdffc00
    Oct 3 19:56:42 ubuntu kernel: [ 2.287485] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    Oct 3 19:56:42 ubuntu kernel: [ 2.287599] usb usb1: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 2.287644] hub 1-0:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 2.287651] hub 1-0:1.0: 8 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 2.392882] USB Universal Host Controller Interface driver v3.0
    Oct 3 19:56:42 ubuntu kernel: [ 2.392960] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
    Oct 3 19:56:42 ubuntu kernel: [ 2.392973] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Oct 3 19:56:42 ubuntu kernel: [ 2.393017] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    Oct 3 19:56:42 ubuntu kernel: [ 2.393043] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007880
    Oct 3 19:56:42 ubuntu kernel: [ 2.393172] usb usb2: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 2.393216] hub 2-0:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 2.393223] hub 2-0:1.0: 2 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 2.493442] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
    Oct 3 19:56:42 ubuntu kernel: [ 2.493455] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Oct 3 19:56:42 ubuntu kernel: [ 2.493502] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    Oct 3 19:56:42 ubuntu kernel: [ 2.493527] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007c00
    Oct 3 19:56:42 ubuntu kernel: [ 2.493667] usb usb3: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 2.493708] hub 3-0:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 2.493715] hub 3-0:1.0: 2 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 2.594381] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    Oct 3 19:56:42 ubuntu kernel: [ 2.594393] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Oct 3 19:56:42 ubuntu kernel: [ 2.594436] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    Oct 3 19:56:42 ubuntu kernel: [ 2.594460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008000
    Oct 3 19:56:42 ubuntu kernel: [ 2.594575] usb usb4: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 2.594616] hub 4-0:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 2.594622] hub 4-0:1.0: 2 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 2.695321] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    Oct 3 19:56:42 ubuntu kernel: [ 2.695338] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Oct 3 19:56:42 ubuntu kernel: [ 2.695378] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    Oct 3 19:56:42 ubuntu kernel: [ 2.695403] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00008080
    Oct 3 19:56:42 ubuntu kernel: [ 2.695520] usb usb5: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 2.695561] hub 5-0:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 2.695567] hub 5-0:1.0: 2 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 3.213879] usb 2-2: new full speed USB device using uhci_hcd and address 2
    Oct 3 19:56:42 ubuntu kernel: [ 3.364701] usb 2-2: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 3.367624] hub 2-2:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 3.370569] hub 2-2:1.0: 4 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 3.682573] usb 3-2: new full speed USB device using uhci_hcd and address 2
    Oct 3 19:56:42 ubuntu kernel: [ 3.867955] usb 3-2: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 4.076312] usb 4-1: new low speed USB device using uhci_hcd and address 2
    Oct 3 19:56:42 ubuntu kernel: [ 4.239746] usb 4-1: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 4.448063] usb 4-2: new full speed USB device using uhci_hcd and address 3
    Oct 3 19:56:42 ubuntu kernel: [ 4.587566] usb 4-2: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 4.590504] hub 4-2:1.0: USB hub found
    Oct 3 19:56:42 ubuntu kernel: [ 4.593453] hub 4-2:1.0: 4 ports detected
    Oct 3 19:56:42 ubuntu kernel: [ 4.885784] usb 2-2.4: new full speed USB device using uhci_hcd and address 3
    Oct 3 19:56:42 ubuntu kernel: [ 5.013828] usb 2-2.4: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 5.193142] usb 4-2.1: new low speed USB device using uhci_hcd and address 4
    Oct 3 19:56:42 ubuntu kernel: [ 5.321183] usb 4-2.1: configuration #1 chosen from 1 choice
    Oct 3 19:56:42 ubuntu kernel: [ 5.540442] usb 2-2.2: new full speed USB device using uhci_hcd and address 4
    Oct 3 19:56:43 ubuntu kernel: [ 5.678476] usb 2-2.2: configuration #1 chosen from 1 choice
    Oct 3 19:56:43 ubuntu kernel: [ 5.684375] usbcore: registered new interface driver libusual
    Oct 3 19:56:43 ubuntu kernel: [ 5.689253] Initializing USB Mass Storage driver...
    Oct 3 19:56:43 ubuntu kernel: [ 5.689324] usbcore: registered new interface driver usb-storage
    Oct 3 19:56:43 ubuntu kernel: [ 5.689328] USB Mass Storage support registered.
    Oct 3 19:56:43 ubuntu kernel: [ 5.700726] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    Oct 3 19:56:43 ubuntu kernel: [ 5.700798] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
    Oct 3 19:56:43 ubuntu kernel: [ 5.700835] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
    Oct 3 19:56:43 ubuntu kernel: [ 5.700853] scsi0 : ata_piix
    Oct 3 19:56:43 ubuntu kernel: [ 6.176184] ata1.00: ATAPI, max UDMA/33
    Oct 3 19:56:43 ubuntu kernel: [ 6.176187] ata1.01: ATAPI, max UDMA/33
    Oct 3 19:56:43 ubuntu kernel: [ 6.332092] ata1.00: configured for UDMA/33
    Oct 3 19:56:43 ubuntu kernel: [ 6.442797] usb 4-2: USB disconnect, address 3
    Oct 3 19:56:43 ubuntu kernel: [ 6.442800] usb 4-2.1: USB disconnect, address 4
    Oct 3 19:56:43 ubuntu kernel: [ 6.486031] ata1.01: configured for UDMA/33
    Oct 3 19:56:43 ubuntu kernel: [ 6.486039] scsi1 : ata_piix
    Oct 3 19:56:43 ubuntu kernel: [ 6.494191] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0F21 PQ: 0 ANSI: 5
    Oct 3 19:56:43 ubuntu kernel: [ 6.495108] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.88 PQ: 0 ANSI: 5
    Oct 3 19:56:43 ubuntu kernel: [ 6.496141] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    Oct 3 19:56:43 ubuntu kernel: [ 6.496163] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 19
    Oct 3 19:56:43 ubuntu kernel: [ 6.496207] ata3: SATA max UDMA/133 cmd 0x00018c00 ctl 0x00018882 bmdma 0x00018400 irq 19
    Oct 3 19:56:43 ubuntu kernel: [ 6.496236] ata4: SATA max UDMA/133 cmd 0x00018800 ctl 0x00018482 bmdma 0x00018408 irq 19
    Oct 3 19:56:43 ubuntu kernel: [ 6.496245] scsi2 : ata_piix
    Oct 3 19:56:43 ubuntu kernel: [ 6.651175] ata3.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
    Oct 3 19:56:43 ubuntu kernel: [ 6.651179] ata3.00: ATA-6: WDC WD2000JD-55HBB0, 08.02D08, max UDMA/133
    Oct 3 19:56:43 ubuntu kernel: [ 6.651183] ata3.00: 390721968 sectors, multi 16: LBA48
    Oct 3 19:56:43 ubuntu kernel: [ 6.657181] ata3.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
    Oct 3 19:56:43 ubuntu kernel: [ 6.657185] ata3.00: configured for UDMA/133
    Oct 3 19:56:43 ubuntu kernel: [ 6.657192] scsi3 : ata_piix
    Oct 3 19:56:43 ubuntu kernel: [ 6.813104] ata4.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
    Oct 3 19:56:43 ubuntu kernel: [ 6.813107] ata4.00: ATA-6: WDC WD2000JD-55HBB0, 08.02D08, max UDMA/133
    Oct 3 19:56:43 ubuntu kernel: [ 6.813110] ata4.00: 390721968 sectors, multi 16: LBA48
    Oct 3 19:56:43 ubuntu kernel: [ 6.819114] ata4.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
    Oct 3 19:56:43 ubuntu kernel: [ 6.819117] ata4.00: configured for UDMA/133
    Oct 3 19:56:43 ubuntu kernel: [ 6.819231] scsi 2:0:0:0: Direct-Access ATA WDC WD2000JD-55H 08.0 PQ: 0 ANSI: 5
    Oct 3 19:56:43 ubuntu kernel: [ 6.819334] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
    Oct 3 19:56:43 ubuntu kernel: [ 6.819350] sda: Write Protect is off
    Oct 3 19:56:43 ubuntu kernel: [ 6.819377] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Oct 3 19:56:43 ubuntu kernel: [ 6.819427] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
    Oct 3 19:56:43 ubuntu kernel: [ 6.819440] sda: Write Protect is off
    Oct 3 19:56:43 ubuntu kernel: [ 6.819466] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Oct 3 19:56:43 ubuntu kernel: [ 6.819469] sda: sda1
    Oct 3 19:56:43 ubuntu kernel: [ 6.844252] sd 2:0:0:0: Attached scsi disk sda
    Oct 3 19:56:43 ubuntu kernel: [ 6.844670] scsi 3:0:0:0: Direct-Access ATA WDC WD2000JD-55H 08.0 PQ: 0 ANSI: 5
    Oct 3 19:56:43 ubuntu kernel: [ 6.844765] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
    Oct 3 19:56:43 ubuntu kernel: [ 6.844779] sdb: Write Protect is off
    Oct 3 19:56:43 ubuntu kernel: [ 6.844805] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Oct 3 19:56:43 ubuntu kernel: [ 6.844849] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
    Oct 3 19:56:43 ubuntu kernel: [ 6.844862] sdb: Write Protect is off
    Oct 3 19:56:43 ubuntu kernel: [ 6.844888] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Oct 3 19:56:43 ubuntu kernel: [ 6.844891] sdb: sdb1 sdb2
    Oct 3 19:56:43 ubuntu kernel: [ 6.865030] sd 3:0:0:0: Attached scsi disk sdb
    Oct 3 19:56:43 ubuntu kernel: [ 6.962981] JFS: nTxBlock = 8089, nTxLock = 64719
    Oct 3 19:56:43 ubuntu kernel: [ 6.972015] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
    Oct 3 19:56:43 ubuntu kernel: [ 6.972222] SGI XFS Quota Management subsystem
    Oct 3 19:56:43 ubuntu kernel: [ 6.991266] NTFS driver 2.1.28 [Flags: R/O MODULE].
    Oct 3 19:56:43 ubuntu kernel: [ 6.997408] fuse init (API version 7.8)
    Oct 3 19:56:43 ubuntu kernel: [ 7.002194] loop: loaded (max 8 devices)
    Oct 3 19:56:43 ubuntu kernel: [ 7.006122] Registering unionfs 20060916-2203
    Oct 3 19:56:43 ubuntu kernel: [ 7.006127] unionfs: debugging is not enabled
    Oct 3 19:56:43 ubuntu kernel: [ 7.009772] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
    Oct 3 19:56:43 ubuntu kernel: [ 7.030829] Capability LSM initialized
    Oct 3 19:56:43 ubuntu kernel: [ 7.068457] ACPI: Processor [CPU1] (supports 8 throttling states)
    Oct 3 19:56:43 ubuntu kernel: [ 7.648123] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 21
    Oct 3 19:56:43 ubuntu kernel: [ 7.702713] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[cfeff000-cfeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
    Oct 3 19:56:43 ubuntu kernel: [ 7.703306] 8139too Fast Ethernet driver 0.9.28
    Oct 3 19:56:43 ubuntu kernel: [ 7.703368] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 17
    Oct 3 19:56:43 ubuntu kernel: [ 7.703726] eth0: RealTek RTL8139 at 0xf8fba800, 00:11:d8:7b:8d:24, IRQ 17
    Oct 3 19:56:43 ubuntu kernel: [ 7.703754] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    Oct 3 19:56:43 ubuntu kernel: [ 7.704117] eth1: RealTek RTL8139 at 0xf8fbcc00, 00:30:bd:b3:0f:5d, IRQ 22
    Oct 3 19:56:43 ubuntu kernel: [ 7.812055] Floppy drive(s): fd0 is 1.44M
    Oct 3 19:56:43 ubuntu kernel: [ 7.825297] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    Oct 3 19:56:43 ubuntu kernel: [ 7.845474] FDC 0 is a post-1991 82077
    Oct 3 19:56:43 ubuntu kernel: [ 7.849107] usbcore: registered new interface driver hiddev
    Oct 3 19:56:43 ubuntu kernel: [ 7.917122] sr 0:0:0:0: Attached scsi generic sg0 type 5
    Oct 3 19:56:43 ubuntu kernel: [ 7.917150] scsi 0:0:1:0: Attached scsi generic sg1 type 5
    Oct 3 19:56:43 ubuntu kernel: [ 7.917175] sd 2:0:0:0: Attached scsi generic sg2 type 0
    Oct 3 19:56:43 ubuntu kernel: [ 7.917199] sd 3:0:0:0: Attached scsi generic sg3 type 0
    Oct 3 19:56:43 ubuntu kernel: [ 7.925080] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
    Oct 3 19:56:43 ubuntu kernel: [ 7.925087] Uniform CD-ROM driver Revision: 3.20
    Oct 3 19:56:43 ubuntu kernel: [ 7.942574] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
    Oct 3 19:56:43 ubuntu kernel: [ 7.959827] input: Mega World USB Game Controllers as /class/input/input1
    Oct 3 19:56:43 ubuntu kernel: [ 7.959838] input: USB HID v1.10 Joystick [Mega World USB Game Controllers] on usb-0000:00:1d.2-1
    Oct 3 19:56:43 ubuntu kernel: [ 8.005507] input: Razer Razer Tarantula Keyboard as /class/input/input2
    Oct 3 19:56:43 ubuntu kernel: [ 8.005533] input: USB HID v1.00 Keyboard [Razer Razer Tarantula Keyboard] on usb-0000:00:1d.0-2.4
    Oct 3 19:56:43 ubuntu kernel: [ 8.009278] input: Razer Razer Tarantula Keyboard as /class/input/input3
    Oct 3 19:56:43 ubuntu kernel: [ 8.009302] input: USB HID v1.00 Device [Razer Razer Tarantula Keyboard] on usb-0000:00:1d.0-2.4
    Oct 3 19:56:43 ubuntu kernel: [ 8.056204] input: Razer Razer Copperhead Laser Mouse as /class/input/input4
    Oct 3 19:56:43 ubuntu kernel: [ 8.056242] input: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.0-2.2
    Oct 3 19:56:43 ubuntu kernel: [ 8.059258] input: Razer Razer Copperhead Laser Mouse as /class/input/input5
    Oct 3 19:56:43 ubuntu kernel: [ 8.059277] input: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1d.0-2.2
    Oct 3 19:56:43 ubuntu kernel: [ 8.059292] usbcore: registered new interface driver usbhid
    Oct 3 19:56:43 ubuntu kernel: [ 8.059296] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    Oct 3 19:56:43 ubuntu kernel: [ 8.632483] kjournald starting. Commit interval 5 seconds
    Oct 3 19:56:43 ubuntu kernel: [ 8.632497] EXT3-fs: mounted filesystem with ordered data mode.
    Oct 3 19:56:43 ubuntu kernel: [ 8.742254] EXT3 FS on loop0, internal journal
    Oct 3 19:56:43 ubuntu kernel: [ 16.321915] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Oct 3 19:56:43 ubuntu kernel: [ 17.505771] Linux agpgart interface v0.102 (c) Dave Jones
    Oct 3 19:56:43 ubuntu kernel: [ 17.647766] agpgart: Detected an Intel 915G Chipset.
    Oct 3 19:56:43 ubuntu kernel: [ 17.653985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Oct 3 19:56:43 ubuntu kernel: [ 17.681002] agpgart: AGP aperture is 256M @ 0x0
    Oct 3 19:56:43 ubuntu kernel: [ 17.681031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Oct 3 19:56:43 ubuntu kernel: [ 17.861455] NET: Registered protocol family 17
    Oct 3 19:56:43 ubuntu kernel: [ 17.980548] iTCO_vendor_support: vendor-support=0
    Oct 3 19:56:43 ubuntu kernel: [ 17.982739] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
    Oct 3 19:56:43 ubuntu kernel: [ 17.989599] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
    Oct 3 19:56:43 ubuntu kernel: [ 17.989666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Oct 3 19:56:43 ubuntu kernel: [ 18.085388] input: PC Speaker as /class/input/input6
    Oct 3 19:56:43 ubuntu kernel: [ 18.644612] drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
    Oct 3 19:56:43 ubuntu kernel: [ 18.654650] drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0204
    Oct 3 19:56:43 ubuntu kernel: [ 18.654671] usbcore: registered new interface driver usblp
    Oct 3 19:56:43 ubuntu kernel: [ 18.654675] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Oct 3 19:56:43 ubuntu kernel: [ 18.654688] usbcore: registered new interface driver xpad
    Oct 3 19:56:43 ubuntu kernel: [ 18.654692] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
    Oct 3 19:56:43 ubuntu kernel: [ 18.671148] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
    Oct 3 19:56:43 ubuntu kernel: [ 18.903704] lp: driver loaded but no devices found
    Oct 3 19:56:43 ubuntu kernel: [ 19.126327] EXT3 FS on loop0, internal journal
    Oct 3 19:56:43 ubuntu kernel: [ 19.431661] kjournald starting. Commit interval 5 seconds
    Oct 3 19:56:43 ubuntu kernel: [ 19.431910] EXT3 FS on loop1, internal journal
    Oct 3 19:56:43 ubuntu kernel: [ 19.431915] EXT3-fs: mounted filesystem with ordered data mode.
    Oct 3 19:56:43 ubuntu kernel: [ 25.006915] NET: Registered protocol family 10
    Oct 3 19:56:43 ubuntu kernel: [ 25.007051] lo: Disabled Privacy Extensions
    Oct 3 19:56:43 ubuntu kernel: [ 31.215250] Adding 976552k swap on /media/host/wubi/disks/swap.virtual.disk. Priority:-1 extents:1 across:976552k
    Oct 3 19:56:43 ubuntu kernel: [ 32.061196] Using specific hotkey driver
    Oct 3 19:56:43 ubuntu kernel: [ 32.090730] No dock devices found.
    Oct 3 19:56:43 ubuntu kernel: [ 32.198698] input: Power Button (FF) as /class/input/input7
    Oct 3 19:56:43 ubuntu kernel: [ 32.198729] ACPI: Power Button (FF) [PWRF]
    Oct 3 19:56:43 ubuntu kernel: [ 32.198797] input: Power Button (CM) as /class/input/input8
    Oct 3 19:56:43 ubuntu kernel: [ 32.198821] ACPI: Power Button (CM) [PWRB]
    Oct 3 19:56:43 ubuntu kernel: [ 32.324159] pcc_acpi: loading...
    Oct 3 19:56:45 ubuntu dhcdbd: Started up.
    Oct 3 19:56:46 ubuntu kernel: [ 37.928229] eth1: link down
    Oct 3 19:56:46 ubuntu kernel: [ 37.928623] ADDRCONF(NETDEV_UP): eth1: link is not ready
    Oct 3 19:56:46 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
    Oct 3 19:56:46 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
    Oct 3 19:56:48 ubuntu kernel: [ 40.661106] ppdev: user-space parallel port driver
    Oct 3 19:56:49 ubuntu hpiod: 1.7.3 accepting connections at 2208...
    Oct 3 19:56:50 ubuntu kernel: [ 42.002993] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    Oct 3 19:56:50 ubuntu kernel: [ 42.003799] apm: disabled - APM is not SMP safe.
    Oct 3 19:56:50 ubuntu kernel: [ 42.658251] Bluetooth: Core ver 2.11
    Oct 3 19:56:50 ubuntu kernel: [ 42.658321] NET: Registered protocol family 31
    Oct 3 19:56:50 ubuntu kernel: [ 42.658325] Bluetooth: HCI device and connection manager initialized
    Oct 3 19:56:50 ubuntu kernel: [ 42.658329] Bluetooth: HCI socket layer initialized
    Oct 3 19:56:51 ubuntu kernel: [ 42.689936] Bluetooth: L2CAP ver 2.8
    Oct 3 19:56:51 ubuntu kernel: [ 42.689941] Bluetooth: L2CAP socket layer initialized
    Oct 3 19:56:51 ubuntu kernel: [ 42.702579] Bluetooth: RFCOMM socket layer initialized
    Oct 3 19:56:51 ubuntu kernel: [ 42.702593] Bluetooth: RFCOMM TTY layer initialized
    Oct 3 19:56:51 ubuntu kernel: [ 42.702595] Bluetooth: RFCOMM ver 1.8
    Oct 3 19:56:51 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
    Oct 3 19:56:51 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
    Oct 3 19:56:51 ubuntu dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
    Oct 3 19:57:06 ubuntu gconfd (wicked-6631): starting (version 2.18.0.1), pid 6631 user 'wicked'
    Oct 3 19:57:06 ubuntu gconfd (wicked-6631): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
    Oct 3 19:57:07 ubuntu gconfd (wicked-6631): Resolved address "xml:readwrite:/home/wicked/.gconf" to a writable configuration source at position 1
    Oct 3 19:57:07 ubuntu gconfd (wicked-6631): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
    Oct 3 19:57:07 ubuntu gconfd (wicked-6631): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
    Oct 3 19:57:07 ubuntu gconfd (wicked-6631): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
    Oct 3 19:57:11 ubuntu kernel: [ 63.186755] UDF-fs: Partition marked readonly; forcing readonly mount
    Oct 3 19:57:11 ubuntu kernel: [ 63.212801] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'NFSMW', timestamp 2005/11/01 05:48 (1078)
    Oct 3 19:57:12 ubuntu gconfd (wicked-6631): Resolved address "xml:readwrite:/home/wicked/.gconf" to a writable configuration source at position 0
    Oct 3 20:00:37 ubuntu gconfd (root-6893): starting (version 2.18.0.1), pid 6893 user 'root'
    Oct 3 20:00:37 ubuntu gconfd (root-6893): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
    Oct 3 20:00:37 ubuntu gconfd (root-6893): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
    Oct 3 20:00:37 ubuntu gconfd (root-6893): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
    Oct 3 20:00:37 ubuntu gconfd (root-6893): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
    Oct 3 20:00:37 ubuntu gconfd (root-6893): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
    Oct 3 20:00:37 ubuntu kernel: [ 269.306971] NTFS volume version 3.1.
     
  11. #10 Athur Dent, 03.10.2007
    Athur Dent

    Athur Dent Handtuchhalter

    Dabei seit:
    08.12.2006
    Beiträge:
    662
    Zustimmungen:
    0
    Ort:
    Hannover
    Nutze das nächste mal bitte die Codeklammern (# oben im Editor).

    Sonst fällt mir nur noch ein die IRQ`s der Hardware anzuschauen und bei gleicher belegung, einen zu ändern - aber auch das halte ich nicht für vielversprechend - würde sich auch nicht im BIOS bemerkbarmachen.

    Ich denke an den BIOS Einstellungen wirst Du Dich schon selber versucht haben.
     
  12. #11 Wicked, 04.10.2007
    Zuletzt bearbeitet: 04.10.2007
    Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
    ja im bios ist nicht viel zu wollen...
    sobald die tv karte steckt sind im bios meine lan karten futsch und auch bei boot konfiguration und so wird die lan karte nicht mehr als möglich angezeigt
    folgendes hatte ich gestern abend nochmal aus der lspci gezogen weils in der anderen geposteten nicht drinwar:
     
  13. #12 Athur Dent, 04.10.2007
    Zuletzt bearbeitet: 04.10.2007
    Athur Dent

    Athur Dent Handtuchhalter

    Dabei seit:
    08.12.2006
    Beiträge:
    662
    Zustimmungen:
    0
    Ort:
    Hannover
    Ne vergess das mit den Abfragen (lspci usw.) das ist kein Softwareproblem.

    Für mich schreit es nach einem neuen TV - Controller. Und den Alten versuchen mit anderen Rechnern auf dieses Verhalten zutesten.

    Evtl. ist es in deisem Fall Ratsam das TV - Teil gleich mit seinem Hardwarehändler zu installieren (zumindestens in Windows) mag zwar etwas kosten, könnte aber davor bewahren selbst bald zum HardwareTV - KartenHändler zu werden. :-)
     
  14. Wicked

    Wicked Jungspund

    Dabei seit:
    07.06.2007
    Beiträge:
    24
    Zustimmungen:
    0
    xD alles kla^^
    hab das proble allerdings nach längerem studieren der karte entdeckt
    es fehlen ob mans glauben will oder nicht 13 sicherungen xD
    also ist denke ich klar was das hardware problem ist...
    verhandle grade noch wegen garantie weil ich hab mit der karte eigntl nix gemacht aber die sicherungen sind weg...
    trotzdem danke an euch
    LG WicKeD
     
  15. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  16. Mike1

    Mike1 Niederösterreicher

    Dabei seit:
    21.12.2006
    Beiträge:
    1.376
    Zustimmungen:
    0
    Ort:
    Österreich
    Sicherungen??(
    seit wann sind auf handelsüblichen PCI-Karten Sicherungen verbaut? ?(
     
  17. #15 Athur Dent, 07.10.2007
    Athur Dent

    Athur Dent Handtuchhalter

    Dabei seit:
    08.12.2006
    Beiträge:
    662
    Zustimmungen:
    0
    Ort:
    Hannover
    Wieß ich auch nicht, hoffendlich werden wir noch Aufgeklärt.
     
Thema:

Problem mit PCI

Die Seite wird geladen...

Problem mit PCI - Ähnliche Themen

  1. Virtualboxproblem

    Virtualboxproblem: Hallo Folgnedes Problem: Ich kann ohne Probleme In Debian-Sid, 64Bit und virtualbox-dkms Unixoide installieren, wenn es sich um eine...
  2. grub-pc Probleme bei upgrade

    grub-pc Probleme bei upgrade: Hallo, ich habe beim dist-upgrade folgendes Problem: ---------- Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt. Trigger für...
  3. Problem bei apt-get upgrade (Kali 2.0)

    Problem bei apt-get upgrade (Kali 2.0): Hi, seit paar Tagen habe ich einige Probs. Dachte es sei mal an der Zeit für ein Update und nun tauchen da einige Fehler auf: Es müssen noch 0 B...
  4. Probleme mit YUM

    Probleme mit YUM: Hallo, ich habe CentOs 7 als Dualboot mit Windows 7 auf einen Dell Latitude E5510 installiert. Dies hat soweit auch alles geklappt. Leider habe...
  5. Problem mit Win-Zugriff auf SAMBA

    Problem mit Win-Zugriff auf SAMBA: Hallo rundherum, vielleicht hat jemand eine Idee... Habe jetzt schon 1 1/2 Tage damit verbraten und den Fehler nicht gefunden. Problem:...