[root@john man]# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.40.4-5.fc15.x86_64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK5056GSY
Serial Number: 40UXTGNPT
LU WWN Device Id: 5 000039 272008f93
Firmware Version: LH003C
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Oct 8 16:47:24 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 2114
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 926
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 5787
10 Spin_Retry_Count 0x0013 118 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 835
183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 123
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 050 045 Old_age Always - 34 (Min/Max 27/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 19
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 786444
193 Load_Cycle_Count 0x0032 075 075 000 Old_age Always - 256372
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 126 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 126 occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 9f 52 0c 40 Error: UNC at LBA = 0x000c529f = 807583
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 98 52 0c 40 00 00:10:40.081 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:10:40.081 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:10:40.080 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:40.080 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:10:40.080 SET FEATURES [Reserved for Serial ATA]
Error 125 occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 9f 52 0c 40 Error: UNC at LBA = 0x000c529f = 807583
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 98 52 0c 40 00 00:10:37.006 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:10:37.006 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:10:37.005 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:37.005 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:10:37.005 SET FEATURES [Reserved for Serial ATA]
Error 124 occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 9f 52 0c 40 Error: UNC at LBA = 0x000c529f = 807583
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 98 52 0c 40 00 00:10:33.931 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:10:33.931 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:10:33.930 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:33.930 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:10:33.930 SET FEATURES [Reserved for Serial ATA]
Error 123 occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 9f 52 0c 40 Error: UNC at LBA = 0x000c529f = 807583
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 98 52 0c 40 00 00:10:30.864 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:10:30.864 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:10:30.863 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:30.863 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:10:30.863 SET FEATURES [Reserved for Serial ATA]
Error 122 occurred at disk power-on lifetime: 5784 hours (241 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 9f 52 0c 40 Error: WP at LBA = 0x000c529f = 807583
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 20 08 10 cb 23 40 00 00:10:27.782 WRITE FPDMA QUEUED
60 08 00 98 52 0c 40 00 00:10:27.780 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:10:27.780 SET FEATURES [Reserved for Serial ATA]
ec 00 00 00 00 00 a0 00 00:10:27.780 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:10:27.779 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 5785 873222815
# 2 Short offline Completed: read failure 90% 5784 873222815
# 3 Short offline Completed: read failure 90% 5783 873222815
# 4 Short offline Aborted by host 90% 1638 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@john man]#