Samba nicht mal Local-Connect...

Diskutiere Samba nicht mal Local-Connect... im Samba Forum im Bereich Netzwerke & Serverdienste; Tach... hab seit neustem ein Problem mit dem Samba-Server. Eigentlich ist alles so eingestellt, dass es funktionieren sollte, aber ich kann nicht...

  1. aer

    aer Pogotopia

    Dabei seit:
    07.08.2007
    Beiträge:
    49
    Zustimmungen:
    0
    Ort:
    SZB
    Tach... hab seit neustem ein Problem mit dem Samba-Server.
    Eigentlich ist alles so eingestellt, dass es funktionieren sollte, aber ich kann nicht connecten (nicht Lokal und auch nicht von dem WinXP-Rechner meines Nachbars über W-Lan).

    Code:
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentary and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.
    #
    
    #======================= Global Settings =======================
    
    [global]
    
    ## Browsing/Identification ###
    
    # Change this to the workgroup/NT-domain name your Samba server will part of
    
    
    # server string is the equivalent of the NT Description field
    
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    ;   wins support = no
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no
    
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
    
    #### Networking ####
    
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
    
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = true
    
    
    
    #### Debugging/Accounting ####
    
    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m
    
    # Put a capping on the size of the log files (in Kb).
    max log size = 1000
    
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    ;   syslog only = no
    
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0
    
    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d
    
    
    ####### Authentication #######
    
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
    ;   security = user
    
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
    encrypt passwords = no
    
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    passdb backend = tdbsam
    
    obey pam restrictions = yes
    
    ;   guest account = nobody
    invalid users = root
    
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    ;   unix password sync = no
    
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
    
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    ;   pam password change = no
    
    ########## Domains ###########
    
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    ;   logon path = \\%N\%U\profile
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    ;   logon home = \\%N\%U
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
    
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
    
    ########## Printing ##########
    
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ;   load printers = yes
    
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/printcap
    
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    ;   printing = cups
    ;   printcap name = cups
    
    # When using [print$], root is implicitly a 'printer admin', but you can
    # also give this right to other users to add drivers and set printer
    # properties
    ;   printer admin = @lpadmin
    
    
    ############ Misc ############
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
    
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
    socket options = TCP_NODELAY 
    restrict anonymous = no
    domain master = no
    preferred master = no
    netbios name = aer-linux
    workgroup = asdf
    max protocol = NT
    acl compatibility = winnt
    ldap ssl = No
    server signing = Auto
    map to guest = Bad User
    guest ok = yes
    case sensitive = no
    strict locking = no
    guest only = yes
    msdfs proxy = no
    security = share
    disable netbios = yes
    
    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
    
    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    ;   domain master = auto
    
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    
    #======================= Share Definitions =======================
    
    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares.  This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no
    
    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.  Un-comment the following parameter
    # to make sure that only "username" can connect to \\server\username
    ;   valid users = %S
    
    # By default, the home directories are exported read-only. Change next
    # parameter to 'yes' if you want to be able to write to them.
    ;   writable = no
    
    # File creation mask is set to 0600 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0664.
    ;   create mask = 0600
    
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700
    
    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   writable = no
    ;   share modes = no
    
    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700
    
    [printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    create mask = 0700
    
    [Apps]
    path = /media/sda2/Files/Apps
    
    [Games]
    path = /media/sda2/Files/Games
    
    []
    path = /media/sda2/Files/Music
    
    []
    path = /media/sda2/Files/Music
    
    [Stuff]
    path = /media/sda2/Files/Stuff
    
    [Public]
    read only = no
    path = /home/aer/Public
    
    [Movies]
    path = /media/sda2/Files/Movies
    
    Der Server soll ausschließlich zum Datenaustausch herhalten.

    Wo liegt das Problem?
     
Thema:

Samba nicht mal Local-Connect...

Die Seite wird geladen...

Samba nicht mal Local-Connect... - Ähnliche Themen

  1. [SOLVED][CentOS 7] Samba server nicht erreichbar trotz firewall regeln.

    [SOLVED][CentOS 7] Samba server nicht erreichbar trotz firewall regeln.: Hallo zusammen, ich habe auf einem XenServer (CentOS 7) einen Samba Server installiert und eingerichtet. Ich habe auch entsprechende Regeln in...
  2. Nach Update debian 8 ist der Zugriff auf samba4 nicht möglich

    Nach Update debian 8 ist der Zugriff auf samba4 nicht möglich: Gerade habe ich debian mit dem Befehl "apt-get ugrade" aktualisiert. Es gab zahlreiche neue Daten unteranderen samba files. Nach neuem Start kann...
  3. Sambaserver im Netzwerk nicht sichtbar

    Sambaserver im Netzwerk nicht sichtbar: Hallo liebe Forengemeinde, mein Name ist Oliver, bin 47 Jahre "jung" ;) und habe vor vielen Jahren eine Zeit lang mit Suse, Debian, Fedora &...
  4. PDF Dokumente vom Samba 4 server aus könen nicht geöffnet werden.

    PDF Dokumente vom Samba 4 server aus könen nicht geöffnet werden.: Ich habe 3 Rechner. Der erste ist wo samba 4 als AD Dc installiert und gleichzeitig Datenfreigabe im smb.conf konfiguriert ist. Die anderen 2...
  5. Samba 4.1.11 Domänen anbindung funktioniert nicht !!!

    Samba 4.1.11 Domänen anbindung funktioniert nicht !!!: Hallo liebe Ubixboard - User, ich hoffe ihr könnt mir helfen habe schon mehrere Foren durchstöbert und echt zahlreiche Tutorials angeschaut und...