Z
Z_Man
Grünschnabel
Probleme mit nforce 590 treiber bei SuSE
Hallo, hab da ein Problem mit dem installieren von dem nForce 590 LAN treiber bei SuSE 10.1 64 bit version, und zwar hab ich alles in der 2. Sektion gemacht, aber jetzt brauch ich Hilfe weil ich noch nicht ins Internet kann und ich weiss nicht was ich in der 3. Sektion machen muss. Hat das mit dem forcedeth zu tun? Brauche Hilfe.
Hier ist die ReadMe:
Linux Driver Disk Readme
For SuSE 10
Version 1.21 [Oct. 21th,2006]
=============================
INTRODUCTION
============
This archive provides drivers for SATA and LAN controller of NVIDIA nForce 550/570/590
and NVIDIA nForce professional 3600/3400/3050.
This Linux distribution ships with the in-box SATA & PATA & LAN drivers which include
the above chipsets support. As such, a driver disk for installation of Linux is unneccesary.
After installing Linux, please update the LAN & SATA driver to latest version with rpm package
provided, and the 'initrd.img' file will be updated as part of the installation of the
driver rpm package so that the new SATA driver will be combined into the pre-existing
'initrd.img' image file
If need to create a driver disk, refer to section 1.
Section 2 provides instructions for installing latest SATA and LAN drivers onto an existing
Linux installation.
Section 3 list the miscellaneous problem and information when running the SuSE10 on NVIDIA platform.
1) INSTALL Linux with driver disk
================================
Prepare a SATA driver diskette and load the driver during OS installation
1.1) Copy the folder located at ./floppy-files/32bit or ./floppy-files/64bit to a formatted diskette.
1.2) Disable SATA raid in BIOS and start the linux Installation with SLES9 SP3 disc.
1.3) Insert your SATA driver diskette into floppy drive when the first installation
screen appear.
1.4) Continue with the installation as normal.
2) Install the SATA and LAN driver package on existing system
==============================================================
2.1) If you install the SuSE 10 before, you just need to run below command:
in 32bit OS: rpm -ivh nvlan-suse10-0.60-1.21.i686.rpm
rpm -ivh nvsata-suse10-0.60-1.21.i686.rpm
in 64bit OS: rpm -ivh nvlan-suse10-0.60-1.21.x86_64.rpm
rpm -ivh nvsata-suse10-0.60-1.21.x86_64.rpm
Please append '--replacefiles' or '--force' parameter if it reports file conflict.
note:
'initrd.img' file will be updated as part of the installation of the SATA driver rpm
package so that the new SATA driver will be combined into the pre-existing 'initrd.img'
image file, the original file will be backuped with '-nv' extension,
for example: initrd-2.6.13-15-default.img-nv, please specify the old initrd image
file in grub options if encounter the problem with the new one.
3) Miscellaneous
===============================
3.1) If need compile the sata_nv.ko file from source we provided with your Makefile, please make sure
the necessary Kernel header files ('scsi.h','scsi_typedefs.h','scsi_obsolete.h') are copied from the Kernel source directory. (For SuSE 10, you can select to install the kernel source when OS
installation)
For forcedeth.ko, just copy the forcedeth.c and Makefile to same directory then make it.
3.2) List the driver modules for your information:
sata_nv.ko: nVidia SATA controller driver, locate at /lib/modules/2.6.13-15-default/kernel/drivers/scsi/
forcedeth.ko: nVidia LAN controller driver, locate at /lib/modules/2.6.13-15-default/kernel/drivers/net/
Meine Specs:
Mobo: Asus m2n32 sli- deluxe
Version: 2.6.16.13-4-smp
Vielen Dank im Voraus, was auch immer sich ergeben wird.
Hallo, hab da ein Problem mit dem installieren von dem nForce 590 LAN treiber bei SuSE 10.1 64 bit version, und zwar hab ich alles in der 2. Sektion gemacht, aber jetzt brauch ich Hilfe weil ich noch nicht ins Internet kann und ich weiss nicht was ich in der 3. Sektion machen muss. Hat das mit dem forcedeth zu tun? Brauche Hilfe.
Hier ist die ReadMe:
Linux Driver Disk Readme
For SuSE 10
Version 1.21 [Oct. 21th,2006]
=============================
INTRODUCTION
============
This archive provides drivers for SATA and LAN controller of NVIDIA nForce 550/570/590
and NVIDIA nForce professional 3600/3400/3050.
This Linux distribution ships with the in-box SATA & PATA & LAN drivers which include
the above chipsets support. As such, a driver disk for installation of Linux is unneccesary.
After installing Linux, please update the LAN & SATA driver to latest version with rpm package
provided, and the 'initrd.img' file will be updated as part of the installation of the
driver rpm package so that the new SATA driver will be combined into the pre-existing
'initrd.img' image file
If need to create a driver disk, refer to section 1.
Section 2 provides instructions for installing latest SATA and LAN drivers onto an existing
Linux installation.
Section 3 list the miscellaneous problem and information when running the SuSE10 on NVIDIA platform.
1) INSTALL Linux with driver disk
================================
Prepare a SATA driver diskette and load the driver during OS installation
1.1) Copy the folder located at ./floppy-files/32bit or ./floppy-files/64bit to a formatted diskette.
1.2) Disable SATA raid in BIOS and start the linux Installation with SLES9 SP3 disc.
1.3) Insert your SATA driver diskette into floppy drive when the first installation
screen appear.
1.4) Continue with the installation as normal.
2) Install the SATA and LAN driver package on existing system
==============================================================
2.1) If you install the SuSE 10 before, you just need to run below command:
in 32bit OS: rpm -ivh nvlan-suse10-0.60-1.21.i686.rpm
rpm -ivh nvsata-suse10-0.60-1.21.i686.rpm
in 64bit OS: rpm -ivh nvlan-suse10-0.60-1.21.x86_64.rpm
rpm -ivh nvsata-suse10-0.60-1.21.x86_64.rpm
Please append '--replacefiles' or '--force' parameter if it reports file conflict.
note:
'initrd.img' file will be updated as part of the installation of the SATA driver rpm
package so that the new SATA driver will be combined into the pre-existing 'initrd.img'
image file, the original file will be backuped with '-nv' extension,
for example: initrd-2.6.13-15-default.img-nv, please specify the old initrd image
file in grub options if encounter the problem with the new one.
3) Miscellaneous
===============================
3.1) If need compile the sata_nv.ko file from source we provided with your Makefile, please make sure
the necessary Kernel header files ('scsi.h','scsi_typedefs.h','scsi_obsolete.h') are copied from the Kernel source directory. (For SuSE 10, you can select to install the kernel source when OS
installation)
For forcedeth.ko, just copy the forcedeth.c and Makefile to same directory then make it.
3.2) List the driver modules for your information:
sata_nv.ko: nVidia SATA controller driver, locate at /lib/modules/2.6.13-15-default/kernel/drivers/scsi/
forcedeth.ko: nVidia LAN controller driver, locate at /lib/modules/2.6.13-15-default/kernel/drivers/net/
Meine Specs:
Mobo: Asus m2n32 sli- deluxe
Version: 2.6.16.13-4-smp
Vielen Dank im Voraus, was auch immer sich ergeben wird.
Zuletzt bearbeitet: