xfig und drucken

Dieses Thema im Forum "Anwendungen" wurde erstellt von tzzaetaynzz, 19.10.2004.

  1. #1 tzzaetaynzz, 19.10.2004
    tzzaetaynzz

    tzzaetaynzz Tripel-As

    Dabei seit:
    31.01.2004
    Beiträge:
    153
    Zustimmungen:
    0
    hallo an alle,

    ich habe mir gerade xfig installiert.
    soweit so gut.
    kann aber nicht drucken. :(
    wenn ich den druckauftrag absetze dann startet mein brother 1430,
    aber druckt nicht.

    cups schreibt in das logfile
    Code:
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Page = 595x842; 0,0 to 595,842
    D [19/Oct/2004:23:20:30 +0200] [Job 35] slowcollate=0, slowduplex=0, sloworder=0D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Title: netzwerkplan_hartmut-20041019.figD [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Creator: fig2dev Version 3.2 Patchlevel 4D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%CreationDate: Tue Oct 19 23:20:30 2004D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%For: admin@emma.as-datentechnik.net (Administrator)
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Orientation: Landscape
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Pages: 1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%BoundingBox: 0 0 595 842
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%DocumentPaperSizes: a4
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%BeginSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%EndSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Magnification: 1.0000
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%EndComments
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Page: 1 1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%Page: 1 1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] pw = 481.0, pl = 684.0
    D [19/Oct/2004:23:20:30 +0200] [Job 35] PageLeft = 57.0, PageRight = 538.0
    D [19/Oct/2004:23:20:30 +0200] [Job 35] PageTop = 770.0, PageBottom = 86.0
    D [19/Oct/2004:23:20:30 +0200] [Job 35] PageWidth = 595.0, PageLength = 842.0
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%BeginPageSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35] 0 %%EndPageSetup
    D [19/Oct/2004:23:20:30 +0200] AcceptClient() 9 from localhost:631.
    D [19/Oct/2004:23:20:30 +0200] CloseClient() 6
    D [19/Oct/2004:23:20:30 +0200] ReadClient() 9 POST / HTTP/1.1
    D [19/Oct/2004:23:20:30 +0200] ProcessIPPRequest: 9 status_code=1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] foomatic-rip version $Revision: 3.30 $ running...D [19/Oct/2004:23:20:30 +0200] [Job 35] Parsing PPD file ...
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option ColorSpace
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option PageSize
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option PageRegion
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option ImageableArea
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option PaperDimension
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option InputSlot
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option MediaType
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option Resolution
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option EconoMode
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Added option Font
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Parameter Summary
    D [19/Oct/2004:23:20:30 +0200] [Job 35] -----------------
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Spooler: cups
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Printer: brother_1430
    D [19/Oct/2004:23:20:30 +0200] [Job 35] PPD file: /etc/cups/ppd/brother_1430.ppdD [19/Oct/2004:23:20:30 +0200] [Job 35] Printer model: Brother HL-1440, Foomatic + hl1250 (recommended)
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Job title: (stdin)
    D [19/Oct/2004:23:20:30 +0200] [Job 35] File(s) to be printed:
    D [19/Oct/2004:23:20:30 +0200] [Job 35] <STDIN>
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'cpi=12'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option cpi=12.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'lpi=7'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option lpi=7.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'page-bottom=86'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option page-bottom=86.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'page-left=57'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option page-left=57.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'page-right=57'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option page-right=57.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'page-top=72'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option page-top=72.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'scaling=100'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown option scaling=100.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Pondering option 'wrap'
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Unknown boolean option "wrap".
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] ================================================D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] File: <STDIN>
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] ================================================D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Reading PostScript input ...
    D [19/Oct/2004:23:20:30 +0200] [Job 35] --> This document is DSC-conforming!
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] -----------
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35] "Prolog" section is missing, inserting it.D [19/Oct/2004:23:20:30 +0200] [Job 35] Inserting PostScript code for CUPS' page accountingD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginFeature: *PageRegion A4
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Option: PageRegion=A4 --> Option will be set by PostScript interpreter
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginFeature: *EconoMode off
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Option: EconoMode=off --> Setting optionD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %% FoomaticRIPOptionSetting: EconoMode=offD [19/Oct/2004:23:20:30 +0200] [Job 35] Option: EconoMode=off --> Setting optionD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginFeature: *InputSlot auto
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Option: InputSlot=auto --> Setting optionD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %% FoomaticRIPOptionSetting: InputSlot=autoD [19/Oct/2004:23:20:30 +0200] [Job 35] Option: InputSlot=auto --> Setting optionD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginFeature: *Resolution 600x600dpiD [19/Oct/2004:23:20:30 +0200] [Job 35] Option: Resolution=600x600dpi --> Option will be set by PostScript interpreter
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginFeature: *MediaType plain
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Option: MediaType=plain --> Setting optionD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %% FoomaticRIPOptionSetting: MediaType=plainD [19/Oct/2004:23:20:30 +0200] [Job 35] Option: MediaType=plain --> Setting optionD [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%EndSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] -----------
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginProlog
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%EndProlog
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] -----------
    D [19/Oct/2004:23:20:30 +0200] [Job 35] New page:  1 1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Inserting option code into "PageSetup" section.D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%BeginPageSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found: %%EndPageSetup
    D [19/Oct/2004:23:20:30 +0200] [Job 35] End of page header
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Stopping search for page header options
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Found:
    D [19/Oct/2004:23:20:30 +0200] [Job 35] n 0 0 220 251 0 360 DrawEllipse 354.999 rot
    D [19/Oct/2004:23:20:30 +0200] [Job 35] --> Output goes directly to the renderer now.D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Starting renderer
    D [19/Oct/2004:23:20:30 +0200] [Job 35] JCL: <job data>
    D [19/Oct/2004:23:20:30 +0200] [Job 35]
    D [19/Oct/2004:23:20:30 +0200] [Job 35] renderer PID pid4=24635
    D [19/Oct/2004:23:20:30 +0200] [Job 35] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dNOPAUSE -sDEVICE=hl1250 -dEconoMode=0 -dSourceTray=0 -dPaperType=0 -sOutputFile=- -
    D [19/Oct/2004:23:20:30 +0200] [Job 35] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dNOPAUSE' '-sDEVICE=hl1250' '-dEconoMode=0' '-dSourceTray=0' '-dPaperType=0' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
    D [19/Oct/2004:23:20:30 +0200] [Job 35] GNU Ghostscript 7.07 (2003-05-17)
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Copyright (C) 2003 artofcode LLC, Benicia, CA.  All rights reserved.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] This software comes with NO WARRANTY: see the file PUBLIC for details.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Loading NimbusRomNo9L-Regu font from /usr/share/fonts/default/Type1/n021003l.pfb... 2595320 1221145 1662616 356238 0 done.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Loading NimbusSanL-Regu font from /usr/share/fonts/default/Type1/n019003l.pfb... 2950184 1534337 1682712 367446 0 done.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Error: /limitcheck in --arcn--
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Operand stack:
    D [19/Oct/2004:23:20:30 +0200] [Job 35] --nostringval--   -1.36992e+08   -1.36234e+08   291.5   -157.8   99.8
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Execution stack:
    D [19/Oct/2004:23:20:30 +0200] [Job 35] %interp_exit   .runexec2   --nostringval--   --nostringval--   --nostringval--   2   %stopped_push   --nostringval--   --nostringval--   --nostringval--  false   1   %stopped_push   1   3   %oparray_pop   1   3   %oparray_pop   1   3   %oparray_pop 1   3   %oparray_pop   .runexec2   --nostringval--   --nostringval--   --nostringval--   2   %stopped_push   --nostringval--   --nostringval--   --nostringval--
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Dictionary stack:
    D [19/Oct/2004:23:20:30 +0200] [Job 35] --dict:1074/1123(ro)(G)--   --dict:0/20(G)--   --dict:126/200(L)--   --dict:77/200(L)--
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Current allocation mode is local
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Last OS error: 2
    D [19/Oct/2004:23:20:30 +0200] [Job 35] GNU Ghostscript 7.07: Unrecoverable error, exit code 1D [19/Oct/2004:23:20:30 +0200] [Job 35] renderer return value: 1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] renderer received signal: 1
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Process dieing with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [19/Oct/2004:23:20:30 +0200] [Job 35] Possible error on renderer command line or PostScript err or. Check options.
    D [19/Oct/2004:23:20:30 +0200] [Job 35] tail process done writing data to STDOUTD [19/Oct/2004:23:20:30 +0200] [Job 35] KID4 finished
    D [19/Oct/2004:23:20:31 +0200] [Job 35] Flushing FIFO.
    D [19/Oct/2004:23:20:31 +0200] [Job 35]
    D [19/Oct/2004:23:20:31 +0200] [Job 35] Closing renderer
    D [19/Oct/2004:23:20:31 +0200] [Job 35] KID3 exited with status 3
    D [19/Oct/2004:23:20:31 +0200] [Job 35] Renderer exit stat: 3
    D [19/Oct/2004:23:20:31 +0200] [Job 35] Renderer process finished
    D [19/Oct/2004:23:20:31 +0200] [Job 35] Process dieing with "Error closing renderer", exit stat:3
    D [19/Oct/2004:23:20:31 +0200] [Job 35] Error closing renderer
    E [19/Oct/2004:23:20:31 +0200] PID 24632 stopped with status 3!
    D [19/Oct/2004:23:20:31 +0200] UpdateJob: job 35, file 0 is complete.
    D [19/Oct/2004:23:20:31 +0200] CancelJob: id = 35
    D [19/Oct/2004:23:20:31 +0200] StopJob: id = 35, force = 0
    D [19/Oct/2004:23:20:31 +0200] StopJob: printer state is 3
    D [19/Oct/2004:23:20:31 +0200] ReadClient() 9 POST / HTTP/1.1
    D [19/Oct/2004:23:20:31 +0200] ProcessIPPRequest: 9 status_code=1
    
    weiter versuche ich dateien zu exportieren
    und bekomme folgende fehlermeldung:
    Code:
    Error during EXPORT.  Messages:
     GNU Ghostscript 7.07: Unrecoverable error, exit code 1
     fig2dev: broken pipe (GhostScript aborted?)
     command was: gs -q -dNOPAUSE -sAutoRotatePages=None -sDEVICE=pdfwrite -sOutputFile=netzwerkplan_hartmut-20041019.pdf - -c quit
    
    warscheinlich das selbe thema.
    hat jemand eine idee?
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
Thema:

xfig und drucken

Die Seite wird geladen...

xfig und drucken - Ähnliche Themen

  1. xfig und alpha-Kanal

    xfig und alpha-Kanal: Kennt jemand eine Moeglichkeit, bei xfig/ fig2dev den Alpha-Kanal (d.h., die Transparenz) eines Bildes (in PNG-Format) zu erhalten, dass man...
  2. Schrift in xfig verrutscht

    Schrift in xfig verrutscht: Hallo, mir passiert etwas mir unerklaerliches: Die Schrift in den eingebundenen xfig Graphiken verrutscht in allen um den selben Abstand,...
  3. xfig+reportclass: Schrift verrutscht

    xfig+reportclass: Schrift verrutscht: Hallo, erfolgreich habe ich xfig Graphiken in mein Reportdokument eingebunden. Nur leider verrutschen alle Beschriftungen nach unten. Dies ist...
  4. xfig Linie so anpassen, dass man sie in Latex importieren kann

    xfig Linie so anpassen, dass man sie in Latex importieren kann: Ist es möglich eine Linie in xfig so anzupassen, dass sie dort genau so erscheint, dass bei der LaTeX-Export-Funktion keine Fehlermeldung (Not a...
  5. xfig verwenden

    xfig verwenden: Hallo! Kann jemand mir dabei helfen. Ich möchte eine Abbildung mit xfig zeichnen. Es handelt sich genau um Button1 und Button2. Ich bin bei der...