Festplatte friert ein nach suspend/resume

Dieses Thema im Forum "Mobile / PDA / Notebook" wurde erstellt von Aracon, 17.08.2011.

  1. Aracon

    Aracon Routinier

    Dabei seit:
    12.10.2003
    Beiträge:
    438
    Zustimmungen:
    0
    Hallo,

    ich habe ein altes Macbook 3.1 mit einer Vertex 2. Ich benutze Archlinux mit kernel 3.0.2, wenn ich das Macbook mit den pm-utils zum schlafen schicke bekomme ich merkwürde Fehler:

    Code:
    Aug 11 23:28:36 localhost kernel: [ 115.612306] ata3.00: exception Emask 0x0
    SAct 0x0 SErr 0x0 action 0x6
    Aug 11 23:28:36 localhost kernel: [ 115.612313] ata3.00: BMDMA stat 0x6
    Aug 11 23:28:36 localhost kernel: [ 115.612318] ata3.00: failed command: READ
    DMA
    Aug 11 23:28:36 localhost kernel: [ 115.612327] ata3.00: cmd
    c8/00:00:ba:9b:56/00:00:00:00:00/e9 tag 0 dma 131072 in
    Aug 11 23:28:36 localhost kernel: [ 115.612329] res
    51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
    Aug 11 23:28:36 localhost kernel: [ 115.612334] ata3.00: status: { DRDY ERR }
    Aug 11 23:28:36 localhost kernel: [ 115.612337] ata3.00: error: { ICRC ABRT }
    Aug 11 23:28:37 localhost kernel: [ 115.956326] ata3.00: exception Emask 0x0
    SAct 0x0 SErr 0x0 action 0x6
    Aug 11 23:28:37 localhost kernel: [ 115.956336] ata3.00: BMDMA stat 0x6
    Aug 11 23:28:37 localhost kernel: [ 115.956344] ata3.00: failed command: READ
    DMA
    Aug 11 23:28:37 localhost kernel: [ 115.956357] ata3.00: cmd
    c8/00:d0:da:fb:30/00:00:00:00:00/e0 tag 0 dma 106496 in
    Aug 11 23:28:37 localhost kernel: [ 115.956360] res
    51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
    Aug 11 23:28:37 localhost kernel: [ 115.956367] ata3.00: status: { DRDY ERR }
    Aug 11 23:28:37 localhost kernel: [ 115.956372] ata3.00: error: { ICRC ABRT }
    
    oder in lang:

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:18:35 CEST 2011
    [    0.000000] Command line: root=/dev/sda3 ro vga=792
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdcf4000 (usable)
    [    0.000000]  BIOS-e820: 00000000bdcf4000 - 00000000bdef5000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000bdef5000 - 00000000beec2000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000beec2000 - 00000000beec4000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000beec4000 - 00000000beec7000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000beec7000 - 00000000beeca000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000beeca000 - 00000000beecb000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000beecb000 - 00000000beedf000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000beedf000 - 00000000beef9000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000beef9000 - 00000000beeff000 (reserved)
    [    0.000000]  BIOS-e820: 00000000beeff000 - 00000000bef00000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000bef00000 - 00000000c0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI 2.4 present.
    [    0.000000] DMI: Apple Inc. MacBook3,1/Mac-F22788C8, BIOS     MB31.88Z.008E.B02.0803051832 03/05/08
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CFFFF write-protect
    [    0.000000]   D0000-DFFFF uncachable
    [    0.000000]   E0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
    [    0.000000]   1 base 000000000 mask F80000000 write-back
    [    0.000000]   2 base 080000000 mask FC0000000 write-back
    [    0.000000]   3 base 100000000 mask FC0000000 write-back
    [    0.000000]   4 base 0BF000000 mask FFF000000 uncachable
    [    0.000000]   5 base 0BEF00000 mask FFFF00000 uncachable
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] last_pfn = 0xbdcf4 max_arch_pfn = 0x400000000
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [    0.000000] init_memory_mapping: 0000000000000000-00000000bdcf4000
    [    0.000000]  0000000000 - 00bdc00000 page 2M
    [    0.000000]  00bdc00000 - 00bdcf4000 page 4k
    [    0.000000] kernel direct mapping tables up to bdcf4000 @ bdcef000-bdcf4000
    [    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
    [    0.000000]  0100000000 - 0140000000 page 2M
    [    0.000000] kernel direct mapping tables up to 140000000 @ 13fffa000-140000000
    [    0.000000] RAMDISK: 37dda000 - 37ff0000
    [    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
    [    0.000000] ACPI: XSDT 00000000beeee1c0 00084 (v01 APPLE   Apple00 0000008E      01000013)
    [    0.000000] ACPI: FACP 00000000beeec000 000F4 (v03 APPLE   Apple00 0000008E Loki 0000005F)
    [    0.000000] ACPI: DSDT 00000000beee1000 045B6 (v01 APPLE   MacBook 00030001 INTL 20061109)
    [    0.000000] ACPI: FACS 00000000beecb000 00040
    [    0.000000] ACPI: HPET 00000000beeeb000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
    [    0.000000] ACPI: APIC 00000000beeea000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
    [    0.000000] ACPI: MCFG 00000000beee9000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
    [    0.000000] ACPI: ASF! 00000000beee8000 000A5 (v32 APPLE   Apple00 00000001 Loki 0000005F)
    [    0.000000] ACPI: SBST 00000000beee7000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
    [    0.000000] ACPI: ECDT 00000000beee6000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
    [    0.000000] ACPI: SSDT 00000000beec6000 004DC (v01  APPLE    CpuPm 00003000 INTL 20061109)
    [    0.000000] ACPI: SSDT 00000000beec5000 0025F (v01  APPLE  Cpu0Tst 00003000 INTL 20061109)
    [    0.000000] ACPI: SSDT 00000000beec4000 000A6 (v01  APPLE  Cpu1Tst 00003000 INTL 20061109)
    [    0.000000] ACPI: SSDT 00000000beee0000 00544 (v01 SataRe  SataPri 00001000 INTL 20061109)
    [    0.000000] ACPI: SSDT 00000000beedf000 00477 (v01 SataRe  SataSec 00001000 INTL 20061109)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-0000000140000000
    [    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
    [    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
    [    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x00140000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[3] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000bdcf4
    [    0.000000]     0: 0x00100000 -> 0x00140000
    [    0.000000] On node 0 totalpages: 1039491
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 5 pages reserved
    [    0.000000]   DMA zone: 3922 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 14280 pages used for memmap
    [    0.000000]   DMA32 zone: 759084 pages, LIFO batch:31
    [    0.000000]   Normal zone: 3584 pages used for memmap
    [    0.000000]   Normal zone: 258560 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x408
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000bdcf4000 - 00000000bdef5000
    [    0.000000] PM: Registered nosave memory: 00000000bdef5000 - 00000000beec2000
    [    0.000000] PM: Registered nosave memory: 00000000beec2000 - 00000000beec4000
    [    0.000000] PM: Registered nosave memory: 00000000beec4000 - 00000000beec7000
    [    0.000000] PM: Registered nosave memory: 00000000beec7000 - 00000000beeca000
    [    0.000000] PM: Registered nosave memory: 00000000beeca000 - 00000000beecb000
    [    0.000000] PM: Registered nosave memory: 00000000beecb000 - 00000000beedf000
    [    0.000000] PM: Registered nosave memory: 00000000beedf000 - 00000000beef9000
    [    0.000000] PM: Registered nosave memory: 00000000beef9000 - 00000000beeff000
    [    0.000000] PM: Registered nosave memory: 00000000beeff000 - 00000000bef00000
    [    0.000000] PM: Registered nosave memory: 00000000bef00000 - 00000000c0000000
    [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
    [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
    [    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed14000
    [    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
    [    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
    [    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u1048576
    [    0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1021566
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: root=/dev/sda3 ro vga=792
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] Memory: 4022504k/5242880k available (4062k kernel code, 1084916k absent, 135460k reserved, 3306k data, 712k init)
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000] 	Verbose stalled-CPUs detection is disabled.
    [    0.000000] NR_IRQS:2304
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 33554432 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2194.720 MHz processor.
    [    0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.33 BogoMIPS (lpj=7315733)
    [    0.003342] pid_max: default: 32768 minimum: 301
    [    0.003459] Security Framework initialized
    [    0.003465] AppArmor: AppArmor disabled by boot time parameter
    [    0.004063] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.007743] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.008877] Mount-cache hash table entries: 256
    [    0.009329] Initializing cgroup subsys cpuacct
    [    0.009365] Initializing cgroup subsys memory
    [    0.009385] Initializing cgroup subsys devices
    [    0.009387] Initializing cgroup subsys freezer
    [    0.009389] Initializing cgroup subsys net_cls
    [    0.009391] Initializing cgroup subsys blkio
    [    0.009449] CPU: Physical Processor ID: 0
    [    0.009451] CPU: Processor Core ID: 0
    [    0.009453] mce: CPU supports 6 MCE banks
    [    0.009462] CPU0: Thermal monitoring enabled (TM2)
    [    0.009467] using mwait in idle threads.
    [    0.010648] ACPI: Core revision 20110413
    [    0.013943] ftrace: allocating 16144 entries in 64 pages
    [    0.017067] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.050344] CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
    [    0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.053330] PEBS disabled due to CPU errata.
    [    0.053330] ... version:                2
    [    0.053330] ... bit width:              40
    [    0.053330] ... generic registers:      2
    [    0.053330] ... value mask:             000000ffffffffff
    [    0.053330] ... max period:             000000007fffffff
    [    0.053330] ... fixed-purpose events:   3
    [    0.053330] ... event mask:             0000000700000003
    [    0.070108] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.096673] Booting Node   0, Processors  #1 Ok.
    [    0.096676] smpboot cpu 1: start_ip = 9a000
    [    0.193350] NMI watchdog enabled, takes one hw-pmu counter.
    [    0.199992] Brought up 2 CPUs
    [    0.199994] Total of 2 processors activated (8781.21 BogoMIPS).
    [    0.201409] devtmpfs: initialized
    [    0.201409] PM: Registering ACPI NVS region at bdcf4000 (2101248 bytes)
    [    0.201409] PM: Registering ACPI NVS region at beec2000 (8192 bytes)
    [    0.201409] PM: Registering ACPI NVS region at beec7000 (12288 bytes)
    [    0.201409] PM: Registering ACPI NVS region at beecb000 (81920 bytes)
    [    0.203521] print_constraints: dummy: 
    [    0.203603] NET: Registered protocol family 16
    [    0.203715] ACPI: bus type pci registered
    [    0.203879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
    [    0.203882] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
    [    0.203887] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
    [    0.221713] PCI: Using configuration type 1 for base access
    [    0.222146] bio: create slab <bio-0> at 0
    [    0.223437] ACPI: EC: EC description table is found, configuring boot EC
    [    0.224793] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [    0.233606] ACPI: SSDT 00000000beec9a98 002FE (v01  APPLE  Cpu0Ist 00003000 INTL 20061109)
    [    0.233825] ACPI: Dynamic OEM Table Load:
    [    0.233828] ACPI: SSDT           (null) 002FE (v01  APPLE  Cpu0Ist 00003000 INTL 20061109)
    [    0.233916] ACPI: SSDT 00000000beec7c98 00222 (v01  APPLE  Cpu0Cst 00003001 INTL 20061109)
    [    0.234123] ACPI: Dynamic OEM Table Load:
    [    0.234126] ACPI: SSDT           (null) 00222 (v01  APPLE  Cpu0Cst 00003001 INTL 20061109)
    [    0.253500] ACPI: SSDT 00000000beec8f18 000C8 (v01  APPLE  Cpu1Ist 00003000 INTL 20061109)
    [    0.253713] ACPI: Dynamic OEM Table Load:
    [    0.253716] ACPI: SSDT           (null) 000C8 (v01  APPLE  Cpu1Ist 00003000 INTL 20061109)
    [    0.253793] ACPI: SSDT 00000000beec7f18 00085 (v01  APPLE  Cpu1Cst 00003000 INTL 20061109)
    [    0.253999] ACPI: Dynamic OEM Table Load:
    [    0.254002] ACPI: SSDT           (null) 00085 (v01  APPLE  Cpu1Cst 00003000 INTL 20061109)
    [    0.273456] ACPI: Interpreter enabled
    [    0.273459] ACPI: (supports S0 S3 S4 S5)
    [    0.273476] ACPI: Using IOAPIC for interrupt routing
    [    0.290124] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    0.290265] ACPI: No dock devices found.
    [    0.290267] HEST: Table not found.
    [    0.290269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.290597] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.291109] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.291112] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.291114] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.291118] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
    [    0.291130] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [    0.291174] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
    [    0.291188] pci 0000:00:02.0: reg 10: [mem 0xd0100000-0xd01fffff 64bit]
    [    0.291196] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [    0.291203] pci 0000:00:02.0: reg 20: [io  0x3110-0x3117]
    [    0.291235] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
    [    0.291246] pci 0000:00:02.1: reg 10: [mem 0xd0200000-0xd02fffff 64bit]
    [    0.291333] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [    0.291391] pci 0000:00:1a.0: reg 20: [io  0x30c0-0x30df]
    [    0.291432] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [    0.291489] pci 0000:00:1a.1: reg 20: [io  0x30a0-0x30bf]
    [    0.291547] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [    0.291572] pci 0000:00:1a.7: reg 10: [mem 0xd0704c00-0xd0704fff]
    [    0.291663] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [    0.291669] pci 0000:00:1a.7: PME# disabled
    [    0.291698] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [    0.291721] pci 0000:00:1b.0: reg 10: [mem 0xd0700000-0xd0703fff 64bit]
    [    0.291806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.291811] pci 0000:00:1b.0: PME# disabled
    [    0.291840] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [    0.291928] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.291933] pci 0000:00:1c.0: PME# disabled
    [    0.291968] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [    0.292055] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [    0.292060] pci 0000:00:1c.4: PME# disabled
    [    0.292092] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [    0.292180] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [    0.292184] pci 0000:00:1c.5: PME# disabled
    [    0.292215] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [    0.292273] pci 0000:00:1d.0: reg 20: [io  0x3080-0x309f]
    [    0.292313] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [    0.292371] pci 0000:00:1d.1: reg 20: [io  0x3060-0x307f]
    [    0.292411] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [    0.292468] pci 0000:00:1d.2: reg 20: [io  0x3040-0x305f]
    [    0.292524] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [    0.292548] pci 0000:00:1d.7: reg 10: [mem 0xd0704800-0xd0704bff]
    [    0.292640] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.292645] pci 0000:00:1d.7: PME# disabled
    [    0.292669] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [    0.292757] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [    0.292876] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
    [    0.292880] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    [    0.292886] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
    [    0.292928] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [    0.292945] pci 0000:00:1f.1: reg 10: [io  0x3108-0x310f]
    [    0.292957] pci 0000:00:1f.1: reg 14: [io  0x3124-0x3127]
    [    0.292970] pci 0000:00:1f.1: reg 18: [io  0x3100-0x3107]
    [    0.292982] pci 0000:00:1f.1: reg 1c: [io  0x3120-0x3123]
    [    0.292994] pci 0000:00:1f.1: reg 20: [io  0x30e0-0x30ef]
    [    0.293040] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101
    [    0.293062] pci 0000:00:1f.2: reg 10: [io  0x30f8-0x30ff]
    [    0.293074] pci 0000:00:1f.2: reg 14: [io  0x311c-0x311f]
    [    0.293086] pci 0000:00:1f.2: reg 18: [io  0x30f0-0x30f7]
    [    0.293099] pci 0000:00:1f.2: reg 1c: [io  0x3118-0x311b]
    [    0.293111] pci 0000:00:1f.2: reg 20: [io  0x3020-0x302f]
    [    0.293123] pci 0000:00:1f.2: reg 24: [io  0x4000-0x400f]
    [    0.293158] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.293163] pci 0000:00:1f.2: PME# disabled
    [    0.293179] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [    0.293196] pci 0000:00:1f.3: reg 10: [mem 0xd0705000-0xd07050ff]
    [    0.293238] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
    [    0.293345] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [    0.293351] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.293356] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
    [    0.293364] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.293455] pci 0000:02:00.0: [14e4:4328] type 0 class 0x000280
    [    0.293487] pci 0000:02:00.0: reg 10: [mem 0xd0500000-0xd0503fff 64bit]
    [    0.293512] pci 0000:02:00.0: reg 18: [mem 0xd0000000-0xd00fffff 64bit pref]
    [    0.293613] pci 0000:02:00.0: supports D1 D2
    [    0.293615] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [    0.293621] pci 0000:02:00.0: PME# disabled
    [    0.300000] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [    0.300005] pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.300010] pci 0000:00:1c.4:   bridge window [mem 0xd0500000-0xd05fffff]
    [    0.300018] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [    0.300223] pci 0000:03:00.0: [11ab:436a] type 0 class 0x000200
    [    0.300369] pci 0000:03:00.0: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
    [    0.300440] pci 0000:03:00.0: reg 18: [io  0x2000-0x20ff]
    [    0.300761] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [    0.301048] pci 0000:03:00.0: supports D1 D2
    [    0.301050] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.301071] pci 0000:03:00.0: PME# disabled
    [    0.301259] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [    0.301264] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
    [    0.301269] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff]
    [    0.301278] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.301332] pci 0000:04:03.0: [11c1:5811] type 0 class 0x000c00
    [    0.301356] pci 0000:04:03.0: reg 10: [mem 0xd0300000-0xd0300fff]
    [    0.301447] pci 0000:04:03.0: supports D1 D2
    [    0.301449] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
    [    0.301455] pci 0000:04:03.0: PME# disabled
    [    0.301516] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [    0.301521] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.301526] pci 0000:00:1e.0:   bridge window [mem 0xd0300000-0xd03fffff]
    [    0.301534] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.301537] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.301539] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.301542] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.301544] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
    [    0.301573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.301689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [    0.301727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [    0.301783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [    0.301921]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.302160]  pci0000:00: ACPI _OSC control (0x1d) granted
    [    0.306138] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [    0.306185] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [    0.306229] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [    0.306272] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [    0.306316] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [    0.306359] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
    [    0.306404] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [    0.306448] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [    0.306536] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.306548] vgaarb: loaded
    [    0.306549] vgaarb: bridge control possible 0000:00:02.0
    [    0.306634] PCI: Using ACPI for IRQ routing
    [    0.309181] PCI: pci_cache_line_size set to 64 bytes
    [    0.309292] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
    [    0.309294] reserve RAM buffer: 00000000bdcf4000 - 00000000bfffffff 
    [    0.309423] NetLabel: Initializing
    [    0.309424] NetLabel:  domain hash size = 128
    [    0.309426] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.309439] NetLabel:  unlabeled traffic allowed by default
    [    0.309452] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.309457] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.309462] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.319996] Switching to clocksource hpet
    [    0.323172] Switched to NOHz mode on CPU #0
    [    0.323290] Switched to NOHz mode on CPU #1
    [    0.326697] pnp: PnP ACPI init
    [    0.326713] ACPI: bus type pnp registered
    [    0.327016] pnp 00:00: [bus 00-ff]
    [    0.327018] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.327021] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.327023] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.327025] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.327027] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [    0.327029] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [    0.327034] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [    0.327036] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [    0.327038] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [    0.327040] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [    0.327042] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [    0.327044] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [    0.327046] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [    0.327048] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [    0.327050] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [    0.327052] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [    0.327054] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [    0.327056] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
    [    0.327127] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.327200] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [    0.327202] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [    0.327204] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [    0.327206] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [    0.327208] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
    [    0.327209] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [    0.327211] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [    0.327273] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.327276] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [    0.327279] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [    0.327281] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [    0.327284] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    [    0.327287] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.327290] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [    0.327293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.327458] pnp 00:02: [io  0x0300-0x031f]
    [    0.327470] pnp 00:02: [irq 6]
    [    0.327509] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
    [    0.327545] pnp 00:03: [io  0x0000-0x001f]
    [    0.327548] pnp 00:03: [io  0x0081-0x0091]
    [    0.327549] pnp 00:03: [io  0x0093-0x009f]
    [    0.327551] pnp 00:03: [io  0x00c0-0x00df]
    [    0.327553] pnp 00:03: [dma 4]
    [    0.327596] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.327605] pnp 00:04: [mem 0xff000000-0xffffffff]
    [    0.327645] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.327705] pnp 00:05: [irq 0 disabled]
    [    0.327711] pnp 00:05: [irq 8]
    [    0.327713] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [    0.327775] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
    [    0.327779] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [    0.327790] pnp 00:06: [io  0x00f0]
    [    0.327796] pnp 00:06: [irq 13]
    [    0.327839] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.327852] pnp 00:07: [io  0x002e-0x002f]
    [    0.327854] pnp 00:07: [io  0x004e-0x004f]
    [    0.327856] pnp 00:07: [io  0x0061]
    [    0.327858] pnp 00:07: [io  0x0063]
    [    0.327859] pnp 00:07: [io  0x0065]
    [    0.327861] pnp 00:07: [io  0x0067]
    [    0.327863] pnp 00:07: [io  0x0070]
    [    0.327864] pnp 00:07: [io  0x0080]
    [    0.327866] pnp 00:07: [io  0x0092]
    [    0.327867] pnp 00:07: [io  0x00b2-0x00b3]
    [    0.327872] pnp 00:07: [io  0x0680-0x069f]
    [    0.327873] pnp 00:07: [io  0x0800-0x080f]
    [    0.327875] pnp 00:07: [io  0x0810-0x0817]
    [    0.327877] pnp 00:07: [io  0x0400-0x047f]
    [    0.327878] pnp 00:07: [io  0x0500-0x053f]
    [    0.327880] pnp 00:07: [io  0x1640-0x164f]
    [    0.327947] system 00:07: [io  0x0680-0x069f] has been reserved
    [    0.327950] system 00:07: [io  0x0800-0x080f] has been reserved
    [    0.327952] system 00:07: [io  0x0810-0x0817] has been reserved
    [    0.327955] system 00:07: [io  0x0400-0x047f] has been reserved
    [    0.327957] system 00:07: [io  0x0500-0x053f] has been reserved
    [    0.327960] system 00:07: [io  0x1640-0x164f] has been reserved
    [    0.327963] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.327972] pnp 00:08: [io  0x0070-0x0077]
    [    0.328013] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.331790] pnp: PnP ACPI: found 9 devices
    [    0.331792] ACPI: ACPI bus type pnp unregistered
    [    0.337999] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [    0.338005] PCI: max bus depth: 1 pci_try_num: 2
    [    0.338055] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0800000-0xd08fffff pref]
    [    0.338059] pci 0000:00:1c.4: BAR 13: assigned [io  0x5000-0x5fff]
    [    0.338064] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff 64bit pref]
    [    0.338068] pci 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]
    [    0.338070] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [    0.338074] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
    [    0.338081] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
    [    0.338086] pci 0000:00:1c.0:   bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref]
    [    0.338094] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [    0.338098] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
    [    0.338104] pci 0000:00:1c.4:   bridge window [mem 0xd0500000-0xd05fffff]
    [    0.338109] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [    0.338118] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0800000-0xd081ffff pref]
    [    0.338121] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [    0.338124] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
    [    0.338130] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff]
    [    0.338136] pci 0000:00:1c.5:   bridge window [mem 0xd0800000-0xd09fffff pref]
    [    0.338144] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [    0.338146] pci 0000:00:1e.0:   bridge window [io  disabled]
    [    0.338152] pci 0000:00:1e.0:   bridge window [mem 0xd0300000-0xd03fffff]
    [    0.338157] pci 0000:00:1e.0:   bridge window [mem pref disabled]
    [    0.338170] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [    0.338179] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.338186] pci 0000:00:1c.0: setting latency timer to 64
    [    0.338194] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.338199] pci 0000:00:1c.4: setting latency timer to 64
    [    0.338209] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.338213] pci 0000:00:1c.5: setting latency timer to 64
    [    0.338237] pci 0000:00:1e.0: power state changed by ACPI to D0
    [    0.338241] pci 0000:00:1e.0: power state changed by ACPI to D0
    [    0.338247] pci 0000:00:1e.0: setting latency timer to 64
    [    0.338252] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.338254] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.338256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.338259] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
    [    0.338261] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
    [    0.338263] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
    [    0.338266] pci_bus 0000:01: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref]
    [    0.338268] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
    [    0.338270] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
    [    0.338273] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [    0.338275] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
    [    0.338277] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
    [    0.338279] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff pref]
    [    0.338282] pci_bus 0000:04: resource 1 [mem 0xd0300000-0xd03fffff]
    [    0.338284] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
    [    0.338286] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
    [    0.338288] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.338291] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
    [    0.338369] NET: Registered protocol family 2
    [    0.338560] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.339792] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.344198] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.344770] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.344773] TCP reno registered
    [    0.344784] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [    0.344830] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [    0.345138] NET: Registered protocol family 1
    [    0.345160] pci 0000:00:02.0: Boot video device
    [    0.345360] PCI: CLS mismatch (256 != 64), using 64 bytes
    [    0.345420] Unpacking initramfs...
    [    0.376695] Freeing initrd memory: 2136k freed
    [    0.377441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    0.377444] Placing 64MB software IO TLB between ffff8800b9cef000 - ffff8800bdcef000
    [    0.377447] software IO TLB at phys 0xb9cef000 - 0xbdcef000
    [    0.377889] audit: initializing netlink socket (disabled)
    [    0.377903] type=2000 audit(1313142520.376:1): initialized
    [    0.390496] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.415268] VFS: Disk quotas dquot_6.5.2
    [    0.415416] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.415585] msgmni has been set to 7860
    [    0.415821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.415861] io scheduler noop registered
    [    0.415863] io scheduler deadline registered
    [    0.415913] io scheduler cfq registered (default)
    [    0.416044] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.416103] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [    0.416224] pcieport 0000:00:1c.4: setting latency timer to 64
    [    0.416278] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
    [    0.416392] pcieport 0000:00:1c.5: setting latency timer to 64
    [    0.416446] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [    0.416580] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [    0.416586] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [    0.416607] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [    0.416609] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [    0.416614] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [    0.416635] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [    0.416638] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [    0.416643] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [    0.416724] vesafb: mode is 1024x768x32, linelength=4096, pages=4
    [    0.416726] vesafb: scrolling: redraw
    [    0.416729] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    0.418633] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90005100000, using 6144k, total 15808k
    [    0.442605] Console: switching to colour frame buffer device 128x48
    [    0.466512] fb0: VESA VGA frame buffer device
    [    0.466523] efifb: dmi detected MacBook3,1 - framebuffer at 0xc0000000 (1024x768, stride 4096)
    [    0.466526] intel_idle: MWAIT substates: 0x22220
    [    0.466528] intel_idle: does not run on family 6 model 15
    [    0.466532] ERST: Table is not found!
    [    0.466583] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.626975] Linux agpgart interface v0.103
    [    0.627067] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [    0.627927] i8042: No controller found
    [    0.628152] mousedev: PS/2 mouse device common for all mice
    [    0.628204] rtc_cmos 00:08: RTC can wake from S4
    [    0.628322] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [    0.628355] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    0.628364] cpuidle: using governor ladder
    [    0.628366] cpuidle: using governor menu
    [    0.628581] TCP cubic registered
    [    0.628584] NET: Registered protocol family 17
    [    0.628592] Registering the dns_resolver key type
    [    0.628690] PM: Hibernation image not present or could not be loaded.
    [    0.628695] registered taskstats version 1
    [    0.640798] rtc_cmos 00:08: setting system clock to 2011-08-12 09:48:41 UTC (1313142521)
    [    0.640858] Initializing network drop monitor service
    [    0.642205] Freeing unused kernel memory: 712k freed
    [    0.642392] Write protecting the kernel read-only data: 6144k
    [    0.642535] Freeing unused kernel memory: 16k freed
    [    0.645230] Freeing unused kernel memory: 776k freed
    [    0.658238] udevd[58]: starting version 173
    [    0.716103] usbcore: registered new interface driver usbfs
    [    0.716129] usbcore: registered new interface driver hub
    [    0.719747] usbcore: registered new device driver usb
    [    0.729097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.729139] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
    [    0.729173] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    0.729178] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    0.729232] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    0.729276] ehci_hcd 0000:00:1a.7: debug port 1
    [    0.735097] SCSI subsystem initialized
    [    0.736705] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [    0.736728] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd0704c00
    [    0.746943] libata version 3.00 loaded.
    [    0.756696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [    0.756891] hub 1-0:1.0: USB hub found
    [    0.756896] hub 1-0:1.0: 4 ports detected
    [    0.756995] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
    [    0.757033] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.757037] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.757046] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    0.757081] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.760960] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [    0.760980] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0704800
    [    0.773352] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.773457] hub 2-0:1.0: USB hub found
    [    0.773460] hub 2-0:1.0: 6 ports detected
    [    0.773539] ata_piix 0000:00:1f.1: version 2.13
    [    0.773552] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [    0.773556] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [    0.773562] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [    0.773606] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.773940] scsi0 : ata_piix
    [    0.774208] scsi1 : ata_piix
    [    0.774534] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30e0 irq 14
    [    0.774537] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30e8 irq 15
    [    0.774563] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    0.774569] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
    [    0.774604] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    0.774964] scsi2 : ata_piix
    [    0.775043] scsi3 : ata_piix
    [    0.775471] ata3: SATA max UDMA/133 cmd 0x30f8 ctl 0x311c bmdma 0x3020 irq 18
    [    0.775474] ata4: SATA max UDMA/133 cmd 0x30f0 ctl 0x3118 bmdma 0x3028 irq 18
    [    0.850500] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.850552] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.850561] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [    0.850565] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    0.850576] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    0.850611] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000030c0
    [    0.850754] hub 3-0:1.0: USB hub found
    [    0.850759] hub 3-0:1.0: 2 ports detected
    [    0.850830] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    0.850836] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    0.850840] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    0.850847] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    0.850888] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000030a0
    [    0.851010] hub 4-0:1.0: USB hub found
    [    0.851014] hub 4-0:1.0: 2 ports detected
    [    0.851082] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.851089] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.851092] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.851100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [    0.851129] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
    [    0.851253] hub 5-0:1.0: USB hub found
    [    0.851257] hub 5-0:1.0: 2 ports detected
    [    0.851324] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    0.851333] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.851336] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.851344] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [    0.851372] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
    [    0.851489] hub 6-0:1.0: USB hub found
    [    0.851493] hub 6-0:1.0: 2 ports detected
    [    0.851570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
    [    0.851577] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.851580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.851587] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [    0.851617] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003040
    [    0.851743] hub 7-0:1.0: USB hub found
    [    0.851747] hub 7-0:1.0: 2 ports detected
    [    0.943701] ata1.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, BP10, max UDMA/33
    [    0.953499] ata3.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
    [    0.953503] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    0.956899] ata1.00: configured for UDMA/33
    [    0.963746] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP10 PQ: 0 ANSI: 5
    [    0.966835] ata3.00: configured for UDMA/133
    [    0.966972] scsi 2:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.33 PQ: 0 ANSI: 5
    [    0.972667] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [    0.972735] sd 2:0:0:0: [sda] Write Protect is off
    [    0.972738] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    0.972759] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    0.973211]  sda: sda1 sda2 sda3
    [    0.973606] sd 2:0:0:0: [sda] Attached SCSI disk
    [    0.976798] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
    [    0.976802] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    0.977010] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    1.099025] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [    1.280021] usb 2-4: new high speed USB device number 2 using ehci_hcd
    [    1.380021] Refined TSC clocksource calibration: 2194.499 MHz.
    [    1.380028] Switching to clocksource tsc
    [    1.411198] udevd[265]: starting version 173
    [    1.434648] lib80211: common routines for IEEE802.11 drivers
    [    1.434651] lib80211_crypt: registered algorithm 'NULL'
    [    1.472295] wl: module license 'Mixed/Proprietary' taints kernel.
    [    1.472299] Disabling lock debugging due to kernel taint
    [    1.481991] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.482001] wl 0000:02:00.0: setting latency timer to 64
    [    1.503073] lib80211_crypt: registered algorithm 'TKIP'
    [    1.503307] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.38
    [    1.507425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input0
    [    1.507434] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [    1.508556] ACPI: acpi_idle registered with cpuidle
    [    1.510824] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [    1.511551] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [    1.511831] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [    1.513139] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
    [    1.513262] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [    1.513540] ACPI: Lid Switch [LID0]
    [    1.513596] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [    1.513603] ACPI: Power Button [PWRB]
    [    1.513648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [    1.513652] ACPI: Sleep Button [SLPB]
    [    1.517729] Monitor-Mwait will be used to enter C-1 state
    [    1.518328] Monitor-Mwait will be used to enter C-2 state
    [    1.519498] Monitor-Mwait will be used to enter C-3 state
    [    1.519512] Marking TSC unstable due to TSC halts in idle
    [    1.519804] Switching to clocksource hpet
    [    1.521085] ACPI: EC: GPE storm detected, transactions will use polling mode
    [    1.531306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [    1.531316] ACPI: Power Button [PWRF]
    [    1.548839] sky2: driver version 1.28
    [    1.548913] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    1.548950] sky2 0000:03:00.0: setting latency timer to 64
    [    1.549045] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
    [    1.549646] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
    [    1.558328] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
    [    1.560398] iTCO_vendor_support: vendor-support=0
    [    1.566146] sky2 0000:03:00.0: eth1: addr 00:1b:63:b3:a4:b8
    [    1.569073] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [    1.609097] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    1.609187] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [    1.793441] usb 3-1: new full speed USB device number 2 using uhci_hcd
    [    2.193439] usb 3-2: new full speed USB device number 3 using uhci_hcd
    [    2.580132] usb 7-1: new low speed USB device number 2 using uhci_hcd
    [    2.990108] usb 7-2: new full speed USB device number 3 using uhci_hcd
    [    3.208685] appletouch: Geyser mode initialized.
    [    3.208752] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input6
    [    3.208852] usbcore: registered new interface driver appletouch
    [    3.210675] generic-usb: probe of 0003:05AC:1000.0001 failed with error -71
    [    3.215683] generic-usb: probe of 0003:05AC:1000.0002 failed with error -71
    [    3.219033] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input7
    [    3.219117] generic-usb 0003:045E:0745.0003: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1a.0-2/input0
    [    3.226449] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input8
    [    3.226561] generic-usb 0003:045E:0745.0004: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1a.0-2/input1
    [    3.251968] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/input/input9
    [    3.252095] generic-usb 0003:045E:0745.0005: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1a.0-2/input2
    [    3.252280] usbcore: registered new interface driver usbhid
    [    3.252282] usbhid: USB HID core driver
    [    3.274808] apple 0003:05AC:8242.0006: hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
    [    3.279044] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input10
    [    3.279139] apple 0003:05AC:022A.0007: input,hidraw4: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
    [    3.282057] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input11
    [    3.282241] apple 0003:05AC:022A.0008: input,hidraw5: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
    [    3.463502] usb 3-1: USB disconnect, device number 2
    [    3.690127] usb 3-1: new full speed USB device number 4 using uhci_hcd
    [    3.894146] Bluetooth: Core ver 2.16
    [    3.894163] NET: Registered protocol family 31
    [    3.894165] Bluetooth: HCI device and connection manager initialized
    [    3.894168] Bluetooth: HCI socket layer initialized
    [    3.894169] Bluetooth: L2CAP socket layer initialized
    [    3.894210] Bluetooth: SCO socket layer initialized
    [    3.901731] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [    3.901952] usbcore: registered new interface driver btusb
    [    4.376895] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [    4.376909] ACPI: Battery Slot [BAT0] (battery present)
    [    4.377037] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [    4.377080] ACPI: AC Adapter [ADP1] (on-line)
    [    4.382347] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [    4.382467] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
    [    4.382548] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [    4.393881] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    4.400932] [drm] Initialized drm 1.1.0 20060810
    [    4.424751] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    4.424837] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [    4.424869] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [    4.446837] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
    [    4.470306] hda_codec: ALC889A: SKU not ready 0x400000f0
    [    4.470379] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
    [    4.472633] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    4.472639] i915 0000:00:02.0: setting latency timer to 64
    [    4.503234] applesmc: : read arg fail
    [    4.569915] i915 0000:00:02.0: irq 45 for MSI/MSI-X
    [    4.569922] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    4.569923] [drm] Driver supports precise vblank timestamp query.
    [    4.570074] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    4.649364] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
    [    4.649367] applesmc: init_smcreg() took 50 ms
    [    4.669988] input: applesmc as /devices/platform/applesmc.768/input/input13
    [    4.946829] firewire_core: created device fw0: GUID 001e52fffe3db702, S400
    [    5.024385] [drm] initialized overlay support
    [    5.187009] checking generic (c0000000 f70000) vs hw (c0000000 10000000)
    [    5.187013] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [    5.187041] Console: switching to colour dummy device 80x25
    [    5.188196] fbcon: inteldrmfb (fb0) is primary device
    [    5.240940] Console: switching to colour frame buffer device 160x50
    [    5.243719] fb0: inteldrmfb frame buffer device
    [    5.243720] drm: registered panic notifier
    [    5.243775] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [    5.312005] EXT4-fs (sda3): re-mounted. Opts: (null)
    [    5.724183] Adding 498008k swap on /dev/sda2.  Priority:-1 extents:1 across:498008k SS
    [    6.498209] sky2 0000:03:00.0: eth1: enabling interface
    [    8.053393] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
    [    8.054149] render error detected, EIR: 0x00000010
    [    8.054153] page table error
    [    8.054156]   PGTBL_ER: 0x00000100
    [    8.054161] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
    [    8.220394] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
    [    8.262010] uhci_hcd 0000:00:1a.1: PCI INT B disabled
    [    8.262423] ehci_hcd 0000:00:1a.7: PCI INT C disabled
    [    8.262474] ehci_hcd 0000:00:1a.7: PME# enabled
    [    8.276340] uhci_hcd 0000:00:1d.0: PCI INT A disabled
    [    8.277099] uhci_hcd 0000:00:1d.1: PCI INT B disabled
    [    8.420042] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd0704c00-0xd0704fff] (PCI address [0xd0704c00-0xd0704fff])
    [    8.420059] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x309)
    [    8.420084] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    [    8.420118] ehci_hcd 0000:00:1a.7: PME# disabled
    [    8.420129] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
    [    8.420137] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [    8.493154] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [    8.493172] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [    8.532482] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    8.532500] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    8.572522] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [    8.572539] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [   14.683472] EXT4-fs (sda3): re-mounted. Opts: commit=0
    [   16.572315] IPv6: Loaded, but administratively disabled, reboot required to enable
    [  979.720038] usb 2-1: new high speed USB device number 5 using ehci_hcd
    [  982.487914] Initializing USB Mass Storage driver...
    [  982.488148] scsi4 : usb-storage 2-1:1.0
    [  982.488442] usbcore: registered new interface driver usb-storage
    [  982.488445] USB Mass Storage support registered.
    [  982.491644] usbcore: registered new interface driver uas
    [  983.493281] scsi 4:0:0:0: Direct-Access     SAMSUNG  HN-M750MBB       2AR1 PQ: 0 ANSI: 0
    [  983.493519] sd 4:0:0:0: Attached scsi generic sg2 type 0
    [  983.494076] sd 4:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [  983.495955] sd 4:0:0:0: [sdb] Write Protect is off
    [  983.495959] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [  983.496700] sd 4:0:0:0: [sdb] No Caching mode page present
    [  983.496704] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [  983.498954] sd 4:0:0:0: [sdb] No Caching mode page present
    [  983.498959] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [  983.534747]  sdb: sdb1
    [  983.537333] sd 4:0:0:0: [sdb] No Caching mode page present
    [  983.537337] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [  983.537340] sd 4:0:0:0: [sdb] Attached SCSI disk
    [  990.256323] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4584.835642] EXT4-fs (sda3): re-mounted. Opts: commit=360
    [ 4584.852540] EXT4-fs (sdb1): re-mounted. Opts: commit=360
    [ 4585.268810] EXT4-fs (sda3): re-mounted. Opts: commit=360
    [ 4585.282222] EXT4-fs (sdb1): re-mounted. Opts: commit=360
    [ 4608.707550] EXT4-fs (sda3): re-mounted. Opts: commit=0
    [ 4608.710916] EXT4-fs (sdb1): re-mounted. Opts: commit=360,commit=0
    [ 4608.947828] PM: Syncing filesystems ... done.
    [ 4608.951429] PM: Preparing system for mem sleep
    [ 4609.886610] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [ 4609.899703] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    [ 4609.912998] PM: Entering mem sleep
    [ 4609.913264] Suspending console(s) (use no_console_suspend to debug)
    [ 4609.914569] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 4609.914685] sd 2:0:0:0: [sda] Stopping disk
    [ 4609.921725] wl 0000:02:00.0: PCI INT A disabled
    [ 4609.921939] ata_piix 0000:00:1f.1: PCI INT A disabled
    [ 4609.922032] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
    [ 4609.922145] uhci_hcd 0000:00:1d.1: PCI INT B disabled
    [ 4609.922167] uhci_hcd 0000:00:1d.0: PCI INT A disabled
    [ 4609.922888] uhci_hcd 0000:00:1a.1: PCI INT B disabled
    [ 4609.932941] ehci_hcd 0000:00:1a.7: PCI INT C disabled
    [ 4609.936266] uhci_hcd 0000:00:1a.0: PCI INT A disabled
    [ 4609.936284] uhci_hcd 0000:00:1d.2: PCI INT C disabled
    [ 4609.939575] ehci_hcd 0000:00:1d.7: PCI INT D disabled
    [ 4609.943244] ata_piix 0000:00:1f.2: PCI INT B disabled
    [ 4610.022994] HDA Intel 0000:00:1b.0: PCI INT A disabled
    [ 4610.036269] PM: suspend of devices complete after 122.339 msecs
    [ 4610.216370] PM: late suspend of devices complete after 180.094 msecs
    [ 4610.216798] ACPI: Preparing to enter system sleep state S3
    [ 4610.262968] PM: Saving platform NVS memory
    [ 4610.270101] Disabling non-boot CPUs ...
    [ 4610.372915] CPU 1 is now offline
    [ 4610.373400] Extended CMOS year: 2000
    [ 4610.373400] ACPI: Low-level resume complete
    [ 4610.373400] PM: Restoring platform NVS memory
    [ 4610.373400] Extended CMOS year: 2000
    [ 4610.373400] Enabling non-boot CPUs ...
    [ 4610.380241] Booting Node 0 Processor 1 APIC 0x1
    [ 4610.380243] smpboot cpu 1: start_ip = 9a000
    [ 4610.473243] NMI watchdog enabled, takes one hw-pmu counter.
    [ 4610.476222] Switched to NOHz mode on CPU #1
    [ 4610.479601] CPU1 is up
    [ 4610.481761] ACPI: Waking up from system sleep state S3
    [ 4610.752989] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    [ 4610.752997] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x3111)
    [ 4610.753001] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
    [ 4610.753007] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    [ 4610.753030] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xd0200004)
    [ 4610.753035] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
    [ 4610.753046] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
    [ 4610.753060] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x30c1)
    [ 4610.753074] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    [ 4610.753086] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
    [ 4610.753101] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x30a1)
    [ 4610.753114] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    [ 4610.753135] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x309)
    [ 4610.753155] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0704c00)
    [ 4610.753163] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    [ 4610.753195] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
    [ 4610.753215] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0700004)
    [ 4610.753221] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
    [ 4610.753227] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100002)
    [ 4610.753261] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    [ 4610.753273] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd0b1d0a1)
    [ 4610.753279] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd060d060)
    [ 4610.753284] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x6060)
    [ 4610.753289] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
    [ 4610.753298] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
    [ 4610.753304] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    [ 4610.753357] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    [ 4610.753369] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd001d001)
    [ 4610.753375] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050)
    [ 4610.753380] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
    [ 4610.753385] pcieport 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
    [ 4610.753394] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
    [ 4610.753401] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    [ 4610.753452] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
    [ 4610.753465] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xd091d081)
    [ 4610.753470] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xd040d040)
    [ 4610.753475] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    [ 4610.753480] pcieport 0000:00:1c.5: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
    [ 4610.753488] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
    [ 4610.753495] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    [ 4610.753535] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    [ 4610.753549] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3081)
    [ 4610.753563] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    [ 4610.753575] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
    [ 4610.753589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x3061)
    [ 4610.753603] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    [ 4610.753614] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309)
    [ 4610.753628] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x3041)
    [ 4610.753643] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
    [ 4610.753663] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
    [ 4610.753683] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0704800)
    [ 4610.753691] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    [ 4610.753709] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 4610.753711] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 4610.753721] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
    [ 4610.753733] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    [ 4610.753738] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd030d030)
    [ 4610.753744] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
    [ 4610.753749] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x0, writing 0x20040400)
    [ 4610.753760] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
    [ 4610.753832] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 4610.753835] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 4610.753860] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005)
    [ 4610.753898] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
    [ 4610.753914] i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x300, writing 0x30a)
    [ 4610.753934] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xd0705000)
    [ 4610.753942] i801_smbus 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
    [ 4610.753981] wl 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
    [ 4610.754004] wl 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd000000c)
    [ 4610.754013] wl 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004)
    [ 4610.754020] wl 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
    [ 4610.754028] wl 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
    [ 4610.754229] sky2 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
    [ 4610.754281] sky2 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000)
    [ 4610.754382] sky2 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)
    [ 4610.754434] sky2 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0400004)
    [ 4610.754461] sky2 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
    [ 4610.754505] sky2 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    [ 4610.754813] firewire_ohci 0000:04:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0300000)
    [ 4610.754819] firewire_ohci 0000:04:03.0: restoring config space at offset 0x3 (was 0x0, writing 0xf810)
    [ 4610.754826] firewire_ohci 0000:04:03.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900216)
    [ 4610.755097] PM: early resume of devices complete after 2.189 msecs
    [ 4610.755413] i915 0000:00:02.0: setting latency timer to 64
    [ 4610.755888] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 4610.757230] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 4610.759539] usb usb3: root hub lost power or was reset
    [ 4610.759566] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 4610.759574] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
    [ 4610.759576] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 4610.759582] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 4610.759639] usb usb4: root hub lost power or was reset
    [ 4610.760030] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 4610.760037] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4610.760083] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 4610.760145] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4610.760153] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 4610.760155] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 4610.760162] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 4610.760187] usb usb5: root hub lost power or was reset
    [ 4610.760197] usb usb6: root hub lost power or was reset
    [ 4610.760201] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
    [ 4610.760211] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 4610.760213] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
    [ 4610.760223] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 4610.760239] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 4610.760241] usb usb7: root hub lost power or was reset
    [ 4610.760243] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 4610.760253] pci 0000:00:1e.0: setting latency timer to 64
    [ 4610.760255] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 4610.760258] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 4610.760273] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 4610.763315] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    [ 4610.763320] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 4610.763377] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 4610.763384] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [ 4610.763389] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 4610.763432] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4610.763478] wl 0000:02:00.0: setting latency timer to 64
    [ 4610.764610] sd 2:0:0:0: [sda] Starting disk
    [ 4610.816383] firewire_core: skipped bus generations, destroying all nodes
    [ 4611.033359] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
    [ 4611.033362] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
    [ 4611.046545] ata1.00: configured for UDMA/33
    [ 4611.089639] usb 7-2: reset full speed USB device number 3 using uhci_hcd
    [ 4611.242565] appletouch: Geyser mode initialized.
    [ 4611.316304] firewire_core: rediscovered device fw0
    [ 4611.389778] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
    [ 4611.389784] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
    [ 4611.463182] ata3.00: configured for UDMA/133
    [ 4611.476315] usb 7-1: reset low speed USB device number 2 using uhci_hcd
    [ 4611.863012] usb 3-2: reset full speed USB device number 3 using uhci_hcd
    [ 4612.099621] usb 3-1: reset full speed USB device number 4 using uhci_hcd
    [ 4613.659895] Extended CMOS year: 2000
    [ 4613.660479] PM: resume of devices complete after 2905.094 msecs
    [ 4613.660773] PM: Finishing wakeup.
    [ 4613.660774] Restarting tasks ... done.
    [ 4613.676356] video LNXVIDEO:00: Restoring backlight state
    [ 4613.729700] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [ 4613.729704] ata3.00: BMDMA stat 0x6
    [ 4613.729707] ata3.00: failed command: READ DMA
    [ 4613.729713] ata3.00: cmd c8/00:10:fa:5a:16/00:00:00:00:00/ec tag 0 dma 8192 in
    [ 4613.729714]          res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
    [ 4613.729717] ata3.00: status: { DRDY ERR }
    [ 4613.729719] ata3.00: error: { ICRC ABRT }
    [ 4613.729731] ata3: soft resetting link
    [ 4613.889666] usb 3-1: USB disconnect, device number 4
    [ 4613.983218] ata3.00: configured for UDMA/133
    [ 4613.983240] ata3: EH complete
    [ 4614.116241] usb 3-1: new full speed USB device number 5 using uhci_hcd
    [ 4614.291559] EXT4-fs (sda3): re-mounted. Opts: commit=0
    [ 4614.308154] EXT4-fs (sdb1): re-mounted. Opts: commit=360,commit=0,commit=0
    [ 4614.310608] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input14
    [ 4614.310748] generic-usb 0003:05AC:1000.0009: input,hidraw6: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
    [ 4614.342615] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input15
    [ 4614.342792] generic-usb 0003:05AC:1000.000A: input,hidraw7: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1
    [ 4614.502427] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [ 4614.502432] ata3.00: BMDMA stat 0x6
    [ 4614.502436] ata3.00: failed command: READ DMA
    [ 4614.502441] ata3.00: cmd c8/00:58:5a:61:16/00:00:00:00:00/ec tag 0 dma 45056 in
    [ 4614.502442]          res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
    [ 4614.502445] ata3.00: status: { DRDY ERR }
    [ 4614.502447] ata3.00: error: { ICRC ABRT }
    [ 4614.502460] ata3: soft resetting link
    [ 4614.632950] usb 3-1: USB disconnect, device number 5
    [ 4614.746420] ata3.00: configured for UDMA/133
    [ 4614.746476] ata3: EH complete
    [ 4614.818873] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [ 4614.818879] ata3.00: BMDMA stat 0x6
    [ 4614.818885] ata3.00: failed command: READ DMA
    [ 4614.818895] ata3.00: cmd c8/00:10:02:25:16/00:00:00:00:00/e5 tag 0 dma 8192 in
    [ 4614.818897]          res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
    [ 4614.818902] ata3.00: status: { DRDY ERR }
    [ 4614.818906] ata3.00: error: { ICRC ABRT }
    [ 4614.818921] ata3: soft resetting link
    [ 4614.912979] usb 3-1: new full speed USB device number 6 using uhci_hcd
    [ 4615.063085] ata3.00: configured for UDMA/133
    [ 4615.063104] ata3: EH complete
    [ 4615.528020] EXT4-fs (sda3): re-mounted. Opts: commit=360
    [ 4615.545594] EXT4-fs (sdb1): re-mounted. Opts: commit=0,commit=360
    
    
    Der Fehler tritt nur auf wenn ich das Macbook vorher auch zum schlafen geschickt habe.

    Ich habe auch mal einen Bugreport auf dem Kernel Bugzilla aufgemacht. (https://bugzilla.kernel.org/show_bug.cgi?id=41022)

    Habt ihr evtl. eine Idee?
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. Aracon

    Aracon Routinier

    Dabei seit:
    12.10.2003
    Beiträge:
    438
    Zustimmungen:
    0
Thema:

Festplatte friert ein nach suspend/resume

Die Seite wird geladen...

Festplatte friert ein nach suspend/resume - Ähnliche Themen

  1. Festplatte auf SD Karte umziehen

    Festplatte auf SD Karte umziehen: Hi zusammen, ich habe einen alten Laptop zum Server umfunktioniert. habe bei der Installation von CentOS bzw. der Partitionierung die...
  2. Western Digital widmet dem Raspberry Pi eine eigene Festplatte

    Western Digital widmet dem Raspberry Pi eine eigene Festplatte: Der Festplattenhersteller Western Digital (WD) gibt die Verfügbarkeit einer 314 GByte großen Festplatte für den Raspberry Pi bekannt. Weiterlesen...
  3. Festplatte wird nicht erkannt

    Festplatte wird nicht erkannt: Hallo, ich habe auf meinem HTPC (Mainboard IOM330-ITX von Zotac) XBMCbuntu installiert, das ist ein Lubuntu mit XBMC als HTPC-Oberfläche. Das...
  4. Indiegogo-Kampagne für Ubuntu-Tablet mit großer Festplatte

    Indiegogo-Kampagne für Ubuntu-Tablet mit großer Festplatte: Das UbuTab getaufte Gerät, für das seit einer Woche eine Finanzierungskampagne auf der Crowdfundingplattform Indiegogo läuft, soll eine 1 TB...
  5. Kurztipp: Clonezilla: Festplatten per Klick kopieren

    Kurztipp: Clonezilla: Festplatten per Klick kopieren: Auf der bisherigen Festplatte ist kein Platz mehr, und der Inhalt soll auf eine neue Platte umziehen. Bei dieser Aufgabe und bei der...