A
a0er
Grünschnabel
Hallo,
ich habe von einem Arbeitskollegen eine USB Festplatte bekommen, diese wird seit kurzem nichtmehr erkannt, er hat da noch ungesicherte Daten drauf, von denen er gerne welche wieder haben würde.
Ich habe diese jetzt versucht mit hilfe der Suse 11.1 einzubinden und irgendetwas zu retten, bekomme sie aber nicht eingebunden.
Festplatte ist eine TrekStore Movie Station maxi t.u.
Beim Einschalten kann man deutlich das Rotieren der Disks fühlen
Ich kann nicht 100% garantieren dass das Kabel in Ordnung ist, es funktioniert direkt am TV allerdings auch nicht.
Ich habe es nach der Beschreibung aus der Hakin9 versucht zu lösen, allerdings gehen die nicht weiter darauf ein was man machen kann wenn die Festplatte nicht erkannt wird, oder ich habs überlesen.
ich habe von einem Arbeitskollegen eine USB Festplatte bekommen, diese wird seit kurzem nichtmehr erkannt, er hat da noch ungesicherte Daten drauf, von denen er gerne welche wieder haben würde.
Ich habe diese jetzt versucht mit hilfe der Suse 11.1 einzubinden und irgendetwas zu retten, bekomme sie aber nicht eingebunden.
Festplatte ist eine TrekStore Movie Station maxi t.u.
Beim Einschalten kann man deutlich das Rotieren der Disks fühlen
Code:
linux-n2gj:/dev/disk/by-id # lsusb
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
linux-n2gj:/dev/disk/by-id #
Code:
linux-n2gj:/dev/disk/by-id # ls
ata-FUJITSU_MHW2120BH_NZ0MT762CSDK edd-int13_dev80-part3
ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part1 edd-int13_dev80-part4
ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part2 edd-int13_dev80-part5
ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part3 scsi-SATA_FUJITSU_MHW2120_NZ0MT762CSDK
ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part4 scsi-SATA_FUJITSU_MHW2120_NZ0MT762CSDK-part1
ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part5 scsi-SATA_FUJITSU_MHW2120_NZ0MT762CSDK-part2
edd-int13_dev80 scsi-SATA_FUJITSU_MHW2120_NZ0MT762CSDK-part3
edd-int13_dev80-part1 scsi-SATA_FUJITSU_MHW2120_NZ0MT762CSDK-part4
edd-int13_dev80-part2 scsi-SATA_FUJITSU_MHW2120_NZ0MT762CSDK-part5
Code:
fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00046af6
Device Boot Start End Blocks Id System
/dev/sda1 1 7300 58637218+ f W95 Ext'd (LBA)
/dev/sda2 7301 7487 1502077+ 82 Linux swap / Solaris
/dev/sda3 * 7488 10099 20972857 83 Linux
/dev/sda4 10099 14593 36098727+ 83 Linux
/dev/sda5 1 7300 58637187 83 Linux
Code:
linux-n2gj:/dev/disk/by-id # cat /etc/fstab
/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part2 swap swap defaults 0 0
/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part3 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part4 /data ext3 defaults 1 2
/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part5 /home ext3 defaults 1 2
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
devpts /dev/pts
Code:
linux-n2gj:/dev/disk/by-id # dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.39-0.2-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-11-23 12:57:38 +0100
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7c0000 (usable)
BIOS-e820: 000000003f7c0000 - 000000003f7ce000 (ACPI data)
BIOS-e820: 000000003f7ce000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x3f7c0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 10000-15000
RAMDISK: 37a14000 - 37fef8a8
ACPI: RSDP 000F7DF0, 0024 (r2 TOSASU)
ACPI: XSDT 3F7C0100, 006C (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: FACP 3F7C0290, 00F4 (r3 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: DSDT 3F7C05E0, 7845 (r1 TOSASU TOSASU00 5 INTL 20051117)
ACPI: FACS 3F7CE000, 0040
ACPI: APIC 3F7C0390, 005C (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: MCFG 3F7C03F0, 003C (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: BOOT 3F7C05B0, 0028 (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: SLIC 3F7C0430, 0176 (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: OEMB 3F7CE040, 004B (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: HPET 3F7C7E30, 0038 (r1 TOSASU TOSASU00 6000702 MSFT 97)
ACPI: TCPA 3F7C7E70, 0032 (r1 TOSASU TOSASU00 1 MSFT 97)
ACPI: SSDT 3F7C7EB0, 086D (r1 AMI CPU_CST 1 INTL 20051117)
ACPI: DMI detected: Toshiba
ACPI: Local APIC address 0xfee00000
119MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00011000 - 00018000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000638a5c] TEXT DATA BSS ==> [0000100000 - 0000638a5c]
#4 [0037a14000 - 0037fef8a8] RAMDISK ==> [0037a14000 - 0037fef8a8]
#5 [0000639000 - 000063c000] INIT_PG_TABLE ==> [0000639000 - 000063c000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003f7c0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003f7c0
On node 0 totalpages: 259919
free_area_init_node: node 0, pgdat c050d300, node_mem_map c1000240
DMA zone: 3947 pages, LIFO batch:0
Normal zone: 223300 pages, LIFO batch:31
HighMem zone: 30386 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
PERCPU: Allocating 37916 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257633
Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part3 resume=/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ0MT762CSDK-part2 splash=silent vga=0x361
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 1595.998 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1017884k/1040128k available (2303k kernel code, 21416k reserved, 1931k data, 280k init, 122624k highmem)
virtual kernel memory layout:
fixmap : 0xffdf7000 - 0xfffff000 (2080 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc052b000 - 0xc0571000 ( 280 kB)
.data : 0xc033ff93 - 0xc0522cd0 (1931 kB)
.text : 0xc0100000 - 0xc033ff93 (2303 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.99 BogoMIPS (lpj=6383992)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 1160 Objects with 63 Devices 390 Methods 40 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz stepping 06
Brought up 1 CPUs
Total of 1 processors activated (3191.99 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1044 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
PCI: Using configuration type 1 for base access
perfmon: version 2.82
perfmon: CPU hotplug support enabled
evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:...............................................................................................................
Initialized 38/40 Regions 13/13 Fields 32/33 Buffers 28/29 Packages (1177 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.....
Executed 5 _INI methods requiring 1 _STA executions (examined 68 objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 5 Runtime GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [ff680000, ff6fffff]
PCI: 0000:00:02.0 reg 14 io port: [ec00, ec07]
PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [ff640000, ff67ffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [ff580000, ff5fffff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [ff63c000, ff63ffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [e880, e89f]
PCI: 0000:00:1d.1 reg 20 io port: [e800, e81f]
PCI: 0000:00:1d.2 reg 20 io port: [e480, e49f]
PCI: 0000:00:1d.3 reg 20 io port: [e400, e41f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [ff63bc00, ff63bfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
PCI: 0000:00:1f.2 reg 20 io port: [ffa0, ffaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:02:00.0 reg 10 64bit mmio: [ff2f0000, ff2fffff]
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.1 32bit mmio: [ff200000, ff2fffff]
PCI: bridge 0000:00:1c.2 io port: [0, fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [0, fffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [0, fffff]
PCI: 0000:05:01.0 reg 10 32bit mmio: [0, fff]
pci 0000:05:01.0: supports D1
pci 0000:05:01.0: supports D2
pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:01.0: PME# disabled
PCI: 0000:05:07.0 reg 10 io port: [d800, d8ff]
PCI: 0000:05:07.0 reg 14 32bit mmio: [ff3ffc00, ff3ffcff]
pci 0000:05:07.0: supports D1
pci 0000:05:07.0: supports D2
pci 0000:05:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:07.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [d000, dfff]
PCI: bridge 0000:00:1e.0 32bit mmio: [ff300000, ff3fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x22-0x3f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x44-0x5f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x63-0x63) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x65-0x65) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x67-0x6f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x72-0x7f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x250-0x25f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x800-0x87f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x400-0x41f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:08: io resource (0x480-0x4bf) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:0a: io resource (0x400-0x41f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:0a: io resource (0x250-0x25f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:1c.2 BAR 8 (0x0-0xfffff), disabling
pnp 00:0c: mem resource (0xc0000-0xcffff) overlaps 0000:00:1c.2 BAR 8 (0x0-0xfffff), disabling
pnp 00:0c: mem resource (0xe0000-0xfffff) overlaps 0000:00:1c.2 BAR 8 (0x0-0xfffff), disabling
pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:1c.2 BAR 9 (0x0-0xfffff), disabling
pnp 00:0c: mem resource (0xc0000-0xcffff) overlaps 0000:00:1c.2 BAR 9 (0x0-0xfffff), disabling
pnp 00:0c: mem resource (0xe0000-0xfffff) overlaps 0000:00:1c.2 BAR 9 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
pci 0000:00:1c.2: BAR 7: can't allocate resource
pci 0000:00:1c.2: BAR 8: can't allocate resource
pci 0000:00:1c.2: BAR 9: can't allocate resource
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0a: iomem range 0xfec18000-0xfec1ffff has been reserved
system 00:0a: iomem range 0xfec20000-0xfec27fff has been reserved
system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xff200000-0xff2fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: disabled
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:05:01.0: CardBus bridge, secondary bus 0000:06
pci 0000:05:01.0: IO window: 0x00d000-0x00d0ff
pci 0000:05:01.0: IO window: 0x00d400-0x00d4ff
pci 0000:05:01.0: PREFETCH window: 0x40000000-0x43ffffff
pci 0000:05:01.0: MEM window: 0x44000000-0x47ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: 0xd000-0xdfff
pci 0000:00:1e.0: MEM window: 0xff300000-0xff3fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x00000043ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
vendor=8086 device=2448
pci 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [0, 0]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [ff200000, ff2fffff]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, fff]
bus: 03 index 1 mmio: [0, fffff]
bus: 03 index 2 mmio: [0, fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [d000, dfff]
bus: 05 index 1 mmio: [ff300000, ff3fffff]
bus: 05 index 2 mmio: [40000000, 43ffffff]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffff]
bus: 06 index 0 io port: [d000, d0ff]
bus: 06 index 1 io port: [d400, d4ff]
bus: 06 index 2 mmio: [40000000, 43ffffff]
bus: 06 index 3 mmio: [44000000, 47ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...<7>Switched to high resolution mode on CPU 0
done
Freeing initrd memory: 5998k freed
Simple Boot Flag at 0x52 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1262473382.616:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 440
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
perfmon: added sampling format default
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7872k, total 7872k
vesafb: mode is 1280x800x16, linelength=2560, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 106656 bytes
bootsplash: ...found (1280x800, 40976 bytes, v3).
Console: switching to colour frame buffer device 156x46
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver8 ports, IRQ sharing enabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 280k freed
Write protecting the kernel text: 2304k
Write protecting the kernel read-only data: 1740k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: EC: non-query interrupt received, switching to interrupt mode
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (27 C)
ACPI: No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATA-8: FUJITSU MHW2120BH, 00400013, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: clearing spurious IRQ
ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
ata2: clearing spurious IRQ
ata2: clearing spurious IRQ
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0040 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5 > sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.39-0.2-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
synaptics: Toshiba Satellite L40 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.39-0.2-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.39-0.2-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000e400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.39-0.2-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff63bc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.39-0.2-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 128 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input2
intel_rng: FWH not detected
Linux agpgart interface v0.103
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, hpet irqs
ACPI: Power Button (CM) [PWRB]
asus-laptop: Asus Laptop Support version 0.42
asus-laptop: Teresa model detected
asus-laptop: Brightness ignored, must be controlled by ACPI video driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_codec.c:2505: hda_codec: model '3stack' is selected
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
vendor=8086 device=27d2
ath5k_pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath5k_pci 0000:02:00.0: setting latency timer to 64
ath5k_pci 0000:02:00.0: registered as 'phy0'
ath5k phy0: Support for RF2425 is under development.
phy0: Selected rate control algorithm 'pid'
acpi device:1f: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/input/input6
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Yenta: CardBus bridge found at 0000:05:01.0 [1179:ff40]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
cs: IO port probe 0xd000-0xdfff: clean.
pcmcia: parent PCI bridge Memory window: 0xff300000 - 0xff3fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:05:07.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
vendor=8086 device=2448
8139too 0000:05:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xf937ec00, 00:1a:92:a9:5f:af, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
cs: IO port probe 0x100-0x3af: excluding 0x258-0x25f
cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 1502068k swap on /dev/sda2. Priority:-1 extents:1 across:1502068k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
[drm:i915_getparam] *ERROR* Unknown parameter 5
[drm:i915_getparam] *ERROR* Unknown parameter 5
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
wlan0: authenticate with AP 00:1f:3f:69:7c:1f
wlan0: authenticated
wlan0: associate with AP 00:1f:3f:69:7c:1f
wlan0: RX AssocResp from 00:1f:3f:69:7c:1f (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0 (WE) : Wireless Event too big (314)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
padlock: VIA PadLock not detected.
martian source 255.255.255.255 from 192.168.2.1, on dev wlan0
ll header: ff:ff:ff:ff:ff:ff:00:1f:3f:69:7c:1d:08:00
martian source 255.255.255.255 from 192.168.2.1, on dev wlan0
ll header: ff:ff:ff:ff:ff:ff:00:1f:3f:69:7c:1d:08:00
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=488 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=468
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=488 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=468
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=488 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=468
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=452 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=432
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=452 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=432
wlan0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=394
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.102 DST=224.0.0.251 LEN=452 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=432
HDA Intel 0000:00:1b.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_codec.c:2505: hda_codec: model '3stack' is selected
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
[drm:i915_getparam] *ERROR* Unknown parameter 5
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:69:7c:1d:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF OPT (94040000) PROTO=2Ich kann nicht 100% garantieren dass das Kabel in Ordnung ist, es funktioniert direkt am TV allerdings auch nicht.
Ich habe es nach der Beschreibung aus der Hakin9 versucht zu lösen, allerdings gehen die nicht weiter darauf ein was man machen kann wenn die Festplatte nicht erkannt wird, oder ich habs überlesen.
