Fluxbox localhost

Diskutiere Fluxbox localhost im Web- & File-Services Forum im Bereich Netzwerke & Serverdienste; Hallo Leute, also ich bin vor 2 Tage von Gnome auf Fluxbox umgestiegen. Jetzt habe ich mein Webserver (lampp den ich auch unter Gnome...

  1. #1 freak_out, 05.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    Hallo Leute,


    also ich bin vor 2 Tage von Gnome auf Fluxbox umgestiegen.

    Jetzt habe ich mein Webserver (lampp den ich auch unter Gnome verwendet habe) gestartet. Alle Dienste laufen auch (Mysql, FTp usw.)

    Nur wenn ich jetzt in mein Browser localhost oder 127.0.0.1 aufrufe, lädt er und lädt und lädt und kommt einfach nichts.
    Hab erstmal gedacht okay könnt am Browser liegen also mal mit Opera drauf. Das selbe.
    Also kann es würklich daran liegen das ich Fluxbox installiert habe? :think:

    Oder könnte es vllt daran liegen das ich am Montag von Ubuntu 8.04 auf 8.10 upgraded habe?
    MfG Freak_out
     
  2. Anzeige

    Anzeige

    Wenn du mehr über Linux erfahren möchtest, dann solltest du dir mal folgende Shellkommandos anschauen.


    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 hagbard celine, 05.11.2008
    hagbard celine

    hagbard celine Routinier

    Dabei seit:
    02.06.2005
    Beiträge:
    251
    Zustimmungen:
    0
    Ort:
    Chemnitz
    ich denke es liegt kaum an der Desktopoberfläche. Der Browser wäre ne Fehlermöglichkeit, wobei wenn du es auf mehrer unterschiedliche Browser getestet hast, kann man dies auch ausschliessen.
    Wie hast du den Update vollzogen? Hast du zuerst das alte Ubuntu runter gehauen und neu aufgesetzt? Oder hast du die Updatefunktion genutzt?
     
  4. #3 freak_out, 05.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    Ich habe die Update Funktion genutzt Habe auch lampp nicht neu installiert.
     
  5. #4 hagbard celine, 05.11.2008
    hagbard celine

    hagbard celine Routinier

    Dabei seit:
    02.06.2005
    Beiträge:
    251
    Zustimmungen:
    0
    Ort:
    Chemnitz
    installier dir mal "lynx", falls du es nicht drauf hast und versuch über ihn den localhost aufzurufen. Wenn es dort auch kracht, dann ist evtl. irgendwas beim Update schief gegangen. Schau dir dazu mal die Logs an. Sonst hätte ich jetzt gerade keine Idee mehr bzw. ne Möglichkeit es zu testen, da ich endlich Zuhause bin. Könnte höchstens morgen auf Arbeit mal nachschauen ....
     
  6. #5 saeckereier, 05.11.2008
    saeckereier

    saeckereier Graue Eminenz

    Dabei seit:
    08.05.2005
    Beiträge:
    1.920
    Zustimmungen:
    0
    Ort:
    Im schönen Norden
    /etc/hosts kontrolliert?
     
  7. #6 liquidnight, 06.11.2008
    liquidnight

    liquidnight Routinier

    Dabei seit:
    16.04.2005
    Beiträge:
    430
    Zustimmungen:
    0
    ruf das mal mit wget -v auf und zeig mal die antwort ...
     
  8. #7 freak_out, 06.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    @Saeckereier

    die /etc/host sind ganz normal aus. Localhost wird als 127.0.0.1 aufgelöst.

    @liquidnight

    --2008-11-06 14:19:41-- http://localhost/
    Auflösen des Hostnamen »localhost«.... 127.0.0.1
    Verbindungsaufbau zu localhost|127.0.0.1|:80... fehlgeschlagen: Connection timed out.
    Erneuter Versuch.

    --2008-11-06 14:22:51-- (Versuch: 2) http://localhost/
    Verbindungsaufbau zu localhost|127.0.0.1|:80... fehlgeschlagen: Connection timed out.
    Erneuter Versuch.

    --2008-11-06 14:26:02-- (Versuch: 3) http://localhost/
    Verbindungsaufbau zu localhost|127.0.0.1|:80... fehlgeschlagen: Connection timed out.
    Erneuter Versuch.

    --2008-11-06 14:29:14-- (Versuch: 4) http://localhost/
    Verbindungsaufbau zu localhost|127.0.0.1|:80... fehlgeschlagen: Connection timed out.
    Erneuter Versuch.

    --2008-11-06 14:32:27-- (Versuch: 5) http://localhost/
    Verbindungsaufbau zu localhost|127.0.0.1|:80...
     
  9. #8 saeckereier, 06.11.2008
    Zuletzt bearbeitet: 06.11.2008
    saeckereier

    saeckereier Graue Eminenz

    Dabei seit:
    08.05.2005
    Beiträge:
    1.920
    Zustimmungen:
    0
    Ort:
    Im schönen Norden
    a) probier mal localhost:8080
    b) zeig mal netstat -tulpen
    .
    .
    .
    EDIT (autom. Beitragszusammenführung) :
    .

    c) Und dann noch iptables -L -v -n
     
  10. #9 liquidnight, 07.11.2008
    liquidnight

    liquidnight Routinier

    Dabei seit:
    16.04.2005
    Beiträge:
    430
    Zustimmungen:
    0
    dein apache läuft nicht. d.h. nichts verbindet sich auf port 80. oder im schlimmsten fall hängt der apache an irgendwas andrem. da guckst du ins access_log des apache rein. wenn dort nichts auftaucht ist entweder der apache fehlkonfiguriert oder läuft nicht.
     
  11. #10 freak_out, 07.11.2008
    Zuletzt bearbeitet: 07.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    Es kann nur mit Fluxbopx zutun haben. Weil im access_log war der letzte Zugriff am:

    [04/Nov/2008:16:18:15 +0100]
    Und am 3.Nov hab ich auf 8.10 upgraded. Und am Abend des 4. November habe ich Fluxbox drauf installiert.

    da ich nichts wichtiges Installiert habe werde ich jetzt mal versuchen Apache neu zu installieren.

    Melde mich dann nochmal.

    EDIT:

    Die neuinstallation hat nichts gebracht:
    @Saeckereier
    1. Geht auch nicht
    2.
    Code:
    netstat -tulpen 
    Aktive Internetverbindungen (Nur Server)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode       PID/Program name
    tcp        0      0 0.0.0.0:3306            0.0.0.0:*               LISTEN      65534      97458451    13781/mysqld    
    tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN      65534      97364063    13755/proftpd: (acc
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          21348       7458/sshd       
    tcp6       0      0 :::80                   :::*                    LISTEN      0          97248758    13723/httpd     
    tcp6       0      0 :::22                   :::*                    LISTEN      0          21346       7458/sshd       
    tcp6       0      0 :::443                  :::*                    LISTEN      0          97248877    13723/httpd     
    udp        0      0 0.0.0.0:47716           0.0.0.0:*                           109        21243       7409/avahi-daemon: 
    udp        0      0 0.0.0.0:5353            0.0.0.0:*                           109        21242       7409/avahi-daemon: 
    
    3,
    Code:
    Chain INPUT (policy ACCEPT 48202 packets, 69M bytes)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain OUTPUT (policy ACCEPT 27069 packets, 1767K bytes)
     pkts bytes target     prot opt in     out     source               destination   
     
  12. marce

    marce Kaiser

    Dabei seit:
    01.08.2007
    Beiträge:
    1.283
    Zustimmungen:
    21
    Poste doch einfach mal die Augabe von
    Code:
    ps -fe
     
  13. #12 freak_out, 07.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    UID PID PPID C STIME TTY TIME CMD
    root 13511 13445 0 17:15 pts/1 00:00:00 su
    root 13529 13511 0 17:15 pts/1 00:00:00 bash
    root 13641 1 0 17:15 pts/1 00:00:00 /bin/sh /opt/lampp/bin/mysqld_sa
    root 13740 13529 0 17:15 pts/1 00:00:00 ps -f
    root@abbi:/home/freakout/Desktop/scripts# ps -fe
    UID PID PPID C STIME TTY TIME CMD
    root 1 0 0 17:08 ? 00:00:01 /sbin/init
    root 2 0 0 17:08 ? 00:00:00 [kthreadd]
    root 3 2 0 17:08 ? 00:00:00 [migration/0]
    root 4 2 0 17:08 ? 00:00:00 [ksoftirqd/0]
    root 5 2 0 17:08 ? 00:00:00 [watchdog/0]
    root 6 2 0 17:08 ? 00:00:00 [migration/1]
    root 7 2 0 17:08 ? 00:00:00 [ksoftirqd/1]
    root 8 2 0 17:08 ? 00:00:00 [watchdog/1]
    root 9 2 0 17:08 ? 00:00:00 [events/0]
    root 10 2 0 17:08 ? 00:00:00 [events/1]
    root 11 2 0 17:08 ? 00:00:00 [khelper]
    root 51 2 0 17:08 ? 00:00:00 [kintegrityd/0]
    root 52 2 0 17:08 ? 00:00:00 [kintegrityd/1]
    root 54 2 0 17:08 ? 00:00:00 [kblockd/0]
    root 55 2 0 17:08 ? 00:00:00 [kblockd/1]
    root 57 2 0 17:08 ? 00:00:00 [kacpid]
    root 58 2 0 17:08 ? 00:00:00 [kacpi_notify]
    root 141 2 0 17:08 ? 00:00:00 [cqueue]
    root 145 2 0 17:08 ? 00:00:00 [kseriod]
    root 191 2 0 17:08 ? 00:00:00 [pdflush]
    root 192 2 0 17:08 ? 00:00:00 [pdflush]
    root 193 2 0 17:08 ? 00:00:00 [kswapd0]
    root 235 2 0 17:08 ? 00:00:00 [aio/0]
    root 236 2 0 17:08 ? 00:00:00 [aio/1]
    root 1077 2 0 17:08 ? 00:00:00 [kstriped]
    root 1085 2 0 17:08 ? 00:00:00 [ksnapd]
    root 1322 2 0 17:08 ? 00:00:00 [ksuspend_usbd]
    root 1323 2 0 17:08 ? 00:00:00 [khubd]
    root 1368 2 0 17:08 ? 00:00:00 [ata/0]
    root 1376 2 0 17:08 ? 00:00:00 [ata/1]
    root 1384 2 0 17:08 ? 00:00:00 [ata_aux]
    root 2171 2 0 17:08 ? 00:00:00 [scsi_eh_0]
    root 2175 2 0 17:08 ? 00:00:00 [scsi_eh_1]
    root 2238 2 0 17:08 ? 00:00:00 [scsi_eh_2]
    root 2239 2 0 17:08 ? 00:00:00 [scsi_eh_3]
    root 2426 2 0 17:08 ? 00:00:00 [scsi_eh_4]
    root 2428 2 0 17:08 ? 00:00:00 [usb-storage]
    root 5218 2 0 17:09 ? 00:00:00 [kdmflush]
    root 5219 2 0 17:09 ? 00:00:00 [kcryptd_io]
    root 5221 2 1 17:09 ? 00:00:06 [kcryptd]
    root 5244 2 0 17:09 ? 00:00:00 [kdmflush]
    root 5252 2 0 17:09 ? 00:00:00 [kdmflush]
    root 6263 2 0 17:10 ? 00:00:00 [kjournald]
    root 6746 1 0 17:10 ? 00:00:00 /sbin/udevd --daemon
    root 7278 2 0 17:10 ? 00:00:00 [kpsmoused]
    root 8957 2 0 17:10 ? 00:00:00 [kjournald]
    root 9229 1 0 17:10 tty4 00:00:00 /sbin/getty 38400 tty4
    root 9230 1 0 17:10 tty5 00:00:00 /sbin/getty 38400 tty5
    root 9235 1 0 17:10 tty2 00:00:00 /sbin/getty 38400 tty2
    root 9236 1 0 17:10 tty3 00:00:00 /sbin/getty 38400 tty3
    root 9237 1 0 17:10 tty6 00:00:00 /sbin/getty 38400 tty6
    root 9422 1 0 17:10 ? 00:00:00 /usr/sbin/acpid -c /etc/acpi/eve
    root 9478 2 0 17:10 ? 00:00:00 [kondemand/0]
    root 9479 2 0 17:10 ? 00:00:00 [kondemand/1]
    syslog 9556 1 0 17:10 ? 00:00:00 /sbin/syslogd -u syslog
    root 9610 1 0 17:10 ? 00:00:00 /bin/dd bs 1 if /proc/kmsg of /v
    klog 9615 1 0 17:10 ? 00:00:00 /sbin/klogd -P /var/run/klogd/km
    108 9654 1 0 17:10 ? 00:00:00 /bin/dbus-daemon --system
    avahi 9674 1 0 17:10 ? 00:00:00 avahi-daemon: running [abbi.loca
    avahi 9675 9674 0 17:10 ? 00:00:00 avahi-daemon: chroot helper
    root 9721 1 0 17:10 ? 00:00:00 /usr/sbin/sshd
    root 9807 1 0 17:10 ? 00:00:00 /usr/bin/vmnet-bridge -s 6 -d /v
    root 10672 1 0 17:10 ? 00:00:00 /usr/bin/vmnet-dhcpd -s 6 -cf /e
    root 10681 1 0 17:10 ? 00:00:00 /usr/bin/vmnet-netifup -s 6 -d /
    root 10683 1 0 17:10 ? 00:00:00 /usr/bin/vmnet-dhcpd -s 6 -cf /e
    root 10691 1 0 17:10 ? 00:00:00 /usr/bin/vmnet-natd -s 6 -d /var
    root 10699 1 0 17:10 ? 00:00:00 /usr/bin/vmnet-netifup -s 6 -d /
    root 10856 1 0 17:10 ? 00:00:00 /usr/sbin/console-kit-daemon
    clamav 10930 1 0 17:10 ? 00:00:00 /usr/bin/freshclam -d --quiet
    root 10964 1 0 17:10 ? 00:00:00 /usr/sbin/cupsd
    privoxy 11209 1 98 17:10 ? 00:05:14 /usr/sbin/privoxy --pidfile /var
    uml-net 11393 1 0 17:10 ? 00:00:00 /usr/bin/uml_switch -unix /var/r
    root 11714 1 0 17:10 ? 00:00:00 python /usr/lib/wicd/wicd-daemon
    root 11761 1 0 17:10 ? 00:00:00 /usr/sbin/winbindd
    root 11786 11761 0 17:10 ? 00:00:00 /usr/sbin/winbindd
    111 11787 1 0 17:10 ? 00:00:00 /usr/sbin/hald
    root 11788 11787 0 17:10 ? 00:00:00 hald-runner
    root 11824 1 0 17:10 ? 00:00:00 python /usr/lib/wicd/monitor.py
    root 11837 11788 0 17:10 ? 00:00:00 hald-addon-input: Listening on /
    111 11843 11788 0 17:10 ? 00:00:00 hald-addon-acpi: listening on ac
    root 11860 11788 0 17:10 ? 00:00:00 hald-addon-storage: polling /dev
    root 11884 11788 0 17:10 ? 00:00:00 hald-addon-storage: polling /dev
    root 11890 11788 0 17:10 ? 00:00:00 hald-addon-storage: polling /dev
    root 11893 11788 0 17:10 ? 00:00:00 hald-addon-storage: polling /dev
    root 11896 11788 0 17:10 ? 00:00:00 hald-addon-storage: polling /dev
    root 11952 1 0 17:10 ? 00:00:00 /usr/sbin/bluetoothd
    root 11958 2 0 17:10 ? 00:00:00 [btaddconn]
    root 11960 2 0 17:10 ? 00:00:00 [btdelconn]
    root 12000 2 0 17:10 ? 00:00:00 [krfcommd]
    root 12031 1 0 17:10 ? 00:00:00 /usr/sbin/gdm
    root 12032 12031 0 17:10 ? 00:00:00 /usr/sbin/gdm
    root 12041 12032 8 17:10 tty7 00:00:27 /usr/X11R6/bin/X :0 -br -audit 0
    root 12055 1 0 17:10 ? 00:00:00 /usr/bin/system-tools-backends
    daemon 12096 1 0 17:10 ? 00:00:00 /usr/sbin/atd
    root 12133 1 0 17:10 ? 00:00:00 /usr/sbin/cron
    freakout 12315 1 0 17:10 ? 00:00:00 /usr/bin/gnome-keyring-daemon -d
    freakout 12331 12032 0 17:10 ? 00:00:01 /usr/bin/fluxbox
    root 12396 1 0 17:10 ? 00:00:00 /usr/bin/timidity -Os -iAD
    root 12401 1 0 17:10 tty1 00:00:00 /sbin/getty 38400 tty1
    freakout 12418 1 0 17:10 ? 00:00:00 /usr/bin/dbus-launch --exit-with
    freakout 12419 1 0 17:10 ? 00:00:00 //bin/dbus-daemon --fork --print
    freakout 12445 12331 0 17:10 ? 00:00:00 Eterm
    freakout 12446 12331 0 17:10 ? 00:00:00 xconsole
    freakout 12450 1 0 17:10 ? 00:00:00 conky
    freakout 12451 12445 0 17:10 pts/0 00:00:00 -bash
    root 12531 1 0 17:11 ? 00:00:00 python /usr/lib/wicd/wicd-daemon
    root 12574 1 0 17:11 ? 00:00:00 wpa_supplicant -B -i ath0 -c /va
    root 12584 1 0 17:11 ? 00:00:00 python /usr/lib/wicd/monitor.py
    freakout 12652 12451 0 17:11 pts/0 00:00:01 gajim -OO gajim.py
    freakout 12665 1 0 17:11 ? 00:00:00 /usr/lib/libgconf2-4/gconfd-2
    freakout 12672 12451 0 17:11 pts/0 00:00:00 /bin/sh /usr/bin/thunderbird
    freakout 12684 12672 0 17:11 pts/0 00:00:00 /bin/sh /usr/lib/thunderbird/run
    freakout 12688 12684 1 17:11 pts/0 00:00:03 /usr/lib/thunderbird/thunderbird
    freakout 12720 12331 0 17:11 ? 00:00:00 /usr/bin/pidgin
    freakout 12736 1 0 17:11 ? 00:00:00 /usr/lib/gvfs/gvfsd
    freakout 12742 1 0 17:11 ? 00:00:00 /usr/lib/gvfs//gvfs-fuse-daemon
    freakout 12814 12331 14 17:11 ? 00:00:34 /usr/lib/firefox-3.0.3/firefox
    freakout 12965 12331 0 17:12 ? 00:00:01 /usr/bin/xchat
    freakout 13432 12331 0 17:14 ? 00:00:00 /usr/bin/gnome-terminal
    freakout 13434 1 0 17:14 ? 00:00:00 /usr/lib/bonobo-activation/bonob
    freakout 13444 13432 0 17:15 ? 00:00:00 gnome-pty-helper
    freakout 13445 13432 0 17:15 pts/1 00:00:00 bash
    root 13511 13445 0 17:15 pts/1 00:00:00 su
    root 13529 13511 0 17:15 pts/1 00:00:00 bash
    root 13616 1 1 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    root 13641 1 0 17:15 pts/1 00:00:00 /bin/sh /opt/lampp/bin/mysqld_sa
    nobody 13662 1 0 17:15 ? 00:00:00 proftpd: (accepting connections)
    nobody 13679 13641 0 17:15 pts/1 00:00:00 /opt/lampp/sbin/mysqld --basedir
    nobody 13681 13616 0 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    nobody 13699 13616 0 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    nobody 13700 13616 0 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    nobody 13701 13616 0 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    nobody 13702 13616 0 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    nobody 13703 13616 0 17:15 ? 00:00:00 /opt/lampp/bin/httpd -k start -D
    root 13759 13529 0 17:15 pts/1 00:00:00 ps -fe

    So bitte schön
     
  14. #13 saeckereier, 07.11.2008
    saeckereier

    saeckereier Graue Eminenz

    Dabei seit:
    08.05.2005
    Beiträge:
    1.920
    Zustimmungen:
    0
    Ort:
    Im schönen Norden
    Sag mal lest ihr eigentich was er postet?

    Der Apache lauscht nur auf IPv6 und in der hosts ist IPv4 drin, schätze das ist der Grund. Füge mal in der httpd.conf Listen 127.0.0.1:80 oder Listen 0.0.0.0:80 hinzu
     
  15. #14 freak_out, 07.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    Also hab es mal genau so gemacht wie du es gesagt hast. Bei Listen 127.0.0.1:80 kommt wenn ich Apache Starte:

    Code:
    Starte XAMPP fuer Linux 1.6.8a...
    XAMPP: Starte Apache mit SSL (und PHP5)...
    XAMPP: Fehler 1 beim Starten vom Apache!
    XAMPP: Starte Diagnose...
    XAMPP: Sorry, ich weiss nicht was da schief laeuft.
    XAMPP: Bitte wende Dich ans Forum http://www.apachefriends.org/f/
    XAMPP: Starte MySQL...
    XAMPP: Starte ProFTPD...
    XAMPP fuer Linux gestartet.
    
    Geht nicht.

    Und bei 0.0.0.0:80 komtm zwar die Fehlermeldung beim Starten von Apache nicht aber kann trotzdem nicht drauf zugreifen.
     
  16. .mike.

    .mike. Doppel-As

    Dabei seit:
    27.08.2006
    Beiträge:
    207
    Zustimmungen:
    0
    dann zeig doch mal die apache-konfiguration
     
  17. #16 freak_out, 07.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    Meintes du die httpd.conf?


    Code:
    # This is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see 
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/opt/lampp" will be interpreted by the
    # server as "/opt/lampp/logs/foo.log".
    
    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk.  If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    #
    ServerRoot "/opt/lampp"
    
    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to 
    # prevent Apache from glomming onto all bound IP addresses.
    #
    Listen 0.0.0.0:80
    Listen 80
    
    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    # mod_dbd doesn't work in Apache 2.2.3: getting always heaps of "glibc detected *** corrupted double-linked list" on shutdown - oswald, 10sep06
    #LoadModule dbd_module modules/mod_dbd.so
    LoadModule bucketeer_module modules/mod_bucketeer.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule echo_module modules/mod_echo.so
    LoadModule case_filter_module modules/mod_case_filter.so
    LoadModule case_filter_in_module modules/mod_case_filter_in.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule charset_lite_module modules/mod_charset_lite.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule apreq_module modules/mod_apreq2.so
    LoadModule ssl_module modules/mod_ssl.so
    
    <IfDefine JUSTTOMAKEAPXSHAPPY>
    LoadModule php4_module        modules/libphp4.so
    LoadModule php5_module        modules/libphp5.so
    </IfDefine>
    
    <IfModule !mpm_winnt_module>
    <IfModule !mpm_netware_module>
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.  
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    User nobody
    Group nogroup
    </IfModule>
    </IfModule>
    
    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    
    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. admin@your-domain.com
    #
    ServerAdmin you@example.com
    
    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    #ServerName www.example.com:80
    # XAMPP
    ServerName localhost
    
    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/opt/lampp/htdocs"
    
    #
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories). 
    #
    # First, we configure the "default" to be a very restrictive set of 
    # features.  
    #
    <Directory />
        Options FollowSymLinks
        AllowOverride None
        #XAMPP
        #Order deny,allow
        #Deny from all
    </Directory>
    
    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #
    
    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory "/opt/lampp/htdocs">
        #
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        #
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        #
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.2/mod/core.html#options
        # for more information.
        #
        #Options Indexes FollowSymLinks
        # XAMPP
        Options Indexes FollowSymLinks ExecCGI Includes
    
    
        #
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
        #
        #AllowOverride None
        # since XAMPP 1.4:
        AllowOverride All
    
    
        #
        # Controls who can get stuff from this server.
        #
        Order allow,deny
        Allow from all
    
    </Directory>
    
    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    <IfModule dir_module>
        #DirectoryIndex index.html
        # XAMPP
        DirectoryIndex index.html index.html.var index.php index.php3 index.php4
    </IfModule>
    
    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    <FilesMatch "^\.ht">
        Order allow,deny
        Deny from all
    </FilesMatch>
    
    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog logs/error_log
    
    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn
    
    <IfModule log_config_module>
        #
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        #
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common
    
        <IfModule logio_module>
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        </IfModule>
    
        #
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a <VirtualHost>
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per-<VirtualHost> access logfiles, transactions will be
        # logged therein and *not* in this file.
        #
        CustomLog logs/access_log common
    
        #
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #
        #CustomLog logs/access_log combined
    </IfModule>
    
    <IfModule alias_module>
        #
        # Redirect: Allows you to tell clients about documents that used to 
        # exist in your server's namespace, but do not anymore. The client 
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://www.example.com/bar
    
        #
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        #
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a <Directory> section to allow access to
        # the filesystem path.
    
        #
        # ScriptAlias: This controls which directories contain server scripts. 
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        #
        ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/"
    
    </IfModule>
    
    <IfModule cgid_module>
        #
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #
        #Scriptsock logs/cgisock
    </IfModule>
    
    #
    # "/opt/lampp/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/opt/lampp/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>
    
    #
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain
    
    <IfModule mime_module>
        #
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        #
        TypesConfig etc/mime.types
    
        #
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #
        #AddType application/x-gzip .tgz
        #
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        #
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        #
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz
    
        #
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        #
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #
        #AddHandler cgi-script .cgi
        # XAMPP, since LAMPP 0.9.8:
        AddHandler cgi-script .cgi .pl
    
        # For files that include their own HTTP headers:
        #AddHandler send-as-is asis
    
        # For server-parsed imagemap files:
        #AddHandler imap-file map
    
        # For type maps (negotiated resources):
        #AddHandler type-map var
    
        #
        # Filters allow you to process content before it is sent to the client.
        #
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #
        # XAMPP
        AddType text/html .shtml
        AddOutputFilter INCLUDES .shtml
    </IfModule>
    
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile etc/magic
    
    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    #
    
    #
    # EnableMMAP and EnableSendfile: On systems that support it, 
    # memory-mapping or the sendfile syscall is used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted 
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #
    EnableMMAP off
    EnableSendfile off
    
    # Supplemental configuration
    #
    # The configuration files in the etc/extra/ directory can be 
    # included to add extra features or to modify the default configuration of 
    # the server, or you may simply copy their contents here and change as 
    # necessary.
    
    # Server-pool management (MPM specific)
    #Include etc/extra/httpd-mpm.conf
    
    # Multi-language error messages
    #Include etc/extra/httpd-multilang-errordoc.conf
    
    # Fancy directory listings
    Include etc/extra/httpd-autoindex.conf
    
    # Language settings
    #Include etc/extra/httpd-languages.conf
    
    # User home directories
    #Include etc/extra/httpd-userdir.conf
    
    # Real-time info on requests and configuration
    #Include etc/extra/httpd-info.conf
    
    # Virtual hosts
    #Include etc/extra/httpd-vhosts.conf
    
    # Local access to the Apache HTTP Server Manual
    #Include etc/extra/httpd-manual.conf
    
    # Distributed authoring and versioning (WebDAV)
    #Include etc/extra/httpd-dav.conf
    
    # Various default settings
    Include etc/extra/httpd-default.conf
    
    # Secure (SSL/TLS) connections
    <IfModule ssl_module>
    # XAMPP
    <IfDefine SSL>
    Include etc/extra/httpd-ssl.conf
    </IfDefine>
    </IfModule>
    #
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    
    # XAMPP
    Include etc/extra/httpd-xampp.conf
     
  18. #17 saeckereier, 07.11.2008
    saeckereier

    saeckereier Graue Eminenz

    Dabei seit:
    08.05.2005
    Beiträge:
    1.920
    Zustimmungen:
    0
    Ort:
    Im schönen Norden
    Zeig mal ifconfig lo bzw. ip addr show dev lo
    Dazu wäre es toll, wenn du mal die Apache error log posten könntest. Ich hab mit sowas auch mal ein Problem gehabt, habs dadurch gelöst, dass ich den Dienst ohne IPv& Unterstützung neu installiert habe, ist aber nicht wirklich eine Lösung...
     
  19. doc

    doc Kaffeetrinker

    Dabei seit:
    26.08.2006
    Beiträge:
    586
    Zustimmungen:
    0
    Ort:
    bremen
    laut "netstat -tulpen" lauscht mein apache auch nur auf ipv6, auch wenn ich in der hosts alle ipv6 einträge entferne, und trotzdem funktioniert alles wunderbar.

    also das ist nicht zwingend der fehler ...

    vieleicht steht dort ja noch was interessantes drin!
     
  20. #19 freak_out, 08.11.2008
    freak_out

    freak_out Cookie

    Dabei seit:
    01.12.2007
    Beiträge:
    234
    Zustimmungen:
    0
    Ort:
    Nachbar von Tux (Aufn Mars)
    ifconfig lo:
    Code:
    lo        Link encap:Lokale Schleife  
              LOOPBACK  MTU:16436  Metrik:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              Kollisionen:0 Sendewarteschlangenlänge:0 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B
    ip addr show dev lo
    Code:
    1: lo: <LOOPBACK> mtu 16436 qdisc noop state DOWN 
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    
    Und einmal die error log:
    Code:
    [Fri Nov 07 12:26:21 2008] [notice] suEXEC mechanism enabled (wrapper: /opt/lampp/bin/suexec)
    [Fri Nov 07 12:26:21 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 12:26:21 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 12:26:21 2008] [notice] Digest: generating secret for digest authentication ...
    [Fri Nov 07 12:26:21 2008] [notice] Digest: done
    [Fri Nov 07 12:26:22 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 12:26:22 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 12:26:22 2008] [notice] Apache/2.2.9 (Unix) DAV/2 mod_ssl/2.2.9 OpenSSL/0.9.8h PHP/5.2.6 mod_apreq2-20051231/2.6.0 mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations
    [Fri Nov 07 12:29:22 2008] [notice] caught SIGTERM, shutting down
    [Fri Nov 07 17:15:29 2008] [notice] suEXEC mechanism enabled (wrapper: /opt/lampp/bin/suexec)
    [Fri Nov 07 17:15:29 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 17:15:29 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 17:15:30 2008] [notice] Digest: generating secret for digest authentication ...
    [Fri Nov 07 17:15:30 2008] [notice] Digest: done
    [Fri Nov 07 17:15:31 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 17:15:31 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 17:15:31 2008] [notice] Apache/2.2.9 (Unix) DAV/2 mod_ssl/2.2.9 OpenSSL/0.9.8h PHP/5.2.6 mod_apreq2-20051231/2.6.0 mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations
    [Fri Nov 07 17:59:52 2008] [notice] caught SIGTERM, shutting down
    [Fri Nov 07 19:16:53 2008] [notice] suEXEC mechanism enabled (wrapper: /opt/lampp/bin/suexec)
    [Fri Nov 07 19:16:53 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:16:53 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:16:54 2008] [notice] Digest: generating secret for digest authentication ...
    [Fri Nov 07 19:16:54 2008] [notice] Digest: done
    [Fri Nov 07 19:16:55 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:16:55 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:16:55 2008] [notice] Apache/2.2.9 (Unix) DAV/2 mod_ssl/2.2.9 OpenSSL/0.9.8h PHP/5.2.6 mod_apreq2-20051231/2.6.0 mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations
    [Fri Nov 07 19:17:49 2008] [notice] caught SIGTERM, shutting down
    [Fri Nov 07 19:18:51 2008] [notice] suEXEC mechanism enabled (wrapper: /opt/lampp/bin/suexec)
    [Fri Nov 07 19:18:51 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:18:51 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:18:52 2008] [notice] Digest: generating secret for digest authentication ...
    [Fri Nov 07 19:18:52 2008] [notice] Digest: done
    [Fri Nov 07 19:18:53 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:18:53 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:18:53 2008] [notice] Apache/2.2.9 (Unix) DAV/2 mod_ssl/2.2.9 OpenSSL/0.9.8h PHP/5.2.6 mod_apreq2-20051231/2.6.0 mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations
    [Fri Nov 07 19:18:57 2008] [notice] caught SIGTERM, shutting down
    [Fri Nov 07 19:21:16 2008] [notice] suEXEC mechanism enabled (wrapper: /opt/lampp/bin/suexec)
    [Fri Nov 07 19:21:16 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:21:16 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:21:17 2008] [notice] Digest: generating secret for digest authentication ...
    [Fri Nov 07 19:21:17 2008] [notice] Digest: done
    [Fri Nov 07 19:21:18 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:21:18 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:21:18 2008] [notice] Apache/2.2.9 (Unix) DAV/2 mod_ssl/2.2.9 OpenSSL/0.9.8h PHP/5.2.6 mod_apreq2-20051231/2.6.0 mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations
    [Fri Nov 07 19:22:53 2008] [notice] caught SIGTERM, shutting down
    [Fri Nov 07 19:26:07 2008] [notice] suEXEC mechanism enabled (wrapper: /opt/lampp/bin/suexec)
    [Fri Nov 07 19:26:08 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:26:08 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:26:09 2008] [notice] Digest: generating secret for digest authentication ...
    [Fri Nov 07 19:26:09 2008] [notice] Digest: done
    [Fri Nov 07 19:26:10 2008] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
    [Fri Nov 07 19:26:10 2008] [warn] RSA server certificate CommonName (CN) `localhost' does NOT match server name!?
    [Fri Nov 07 19:26:10 2008] [notice] Apache/2.2.9 (Unix) DAV/2 mod_ssl/2.2.9 OpenSSL/0.9.8h PHP/5.2.6 mod_apreq2-20051231/2.6.0 mod_perl/2.0.4 Perl/v5.10.0 configured -- resuming normal operations
    [Fri Nov 07 19:58:07 2008] [notice] caught SIGTERM, shutting down
    
     
Thema: Fluxbox localhost
Besucher kamen mit folgenden Suchen
  1. filetype:txt .de @live.com.au mail

Die Seite wird geladen...

Fluxbox localhost - Ähnliche Themen

  1. Fluxbox: Neue Version 1.3.6 korrigiert Fehler

    Fluxbox: Neue Version 1.3.6 korrigiert Fehler: Fast vier Jahre nach der stabilen Version 1.3 und fast zwei Jahre nach der letzten Version 1.3.5 haben die Entwickler des schlanken...
  2. Fluxbox Schriften unscharf

    Fluxbox Schriften unscharf: Hallo, habe mir letzte Woche Slackware 13.1 mit Fluxbox auf meinem alten Rechner installiert. Aus irgend einem Grund ist die Schriftdarstellung...
  3. Ubuntu 9.10 minimal Autologin und X starten (Fluxbox)

    Ubuntu 9.10 minimal Autologin und X starten (Fluxbox): Hallo, ich habe eine Ubuntu 9.10 minimal Installation und muss nach dem einloggen Fluxbox mit startx starten. Ich hätte gerne einen Autologin,...
  4. [Fluxbox] Zwei kleine Probleme

    [Fluxbox] Zwei kleine Probleme: Hallo, nutze seit kurzen wieder Fluxbox für Ubuntu und bin soweit eigentlich ziemlich zufrieden. wBar läuft, conky hab ich auch nen schön...
  5. Fluxbox: Menüeinträge ändern

    Fluxbox: Menüeinträge ändern: Hallo, ich nutze Fluxbox und stelle fest, dass bereits deinstallierte Programme immer noch im Menü auftauchen. Die möchte ich entfernen und mir...
  1. Diese Seite verwendet Cookies um Inhalte zu personalisieren. Außerdem werden auch Cookies von Diensten Dritter gesetzt. Mit dem weiteren Aufenthalt akzeptierst du diesen Einsatz von Cookies.
    Information ausblenden