S
shino
Tripel-As
Hallo.
Mal wieder ein Problem mit dem Drucker...
Wie gesagt Scanner funktioniert... Drucker allerdings tot... regt sich gar nicht... keine Testseite, kein gar nichts...
Die Ausgabe von 45-libsane.rules:
Die Ausgabe von epson.conf:
wäre super wenn jemand weiter weiss!
Danke.
LG
shino
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
aso ja.. das System ist Linux Mint... auf Ubuntubasis.
Mal wieder ein Problem mit dem Drucker...
Wie gesagt Scanner funktioniert... Drucker allerdings tot... regt sich gar nicht... keine Testseite, kein gar nichts...
Die Ausgabe von 45-libsane.rules:
SYSFS{idVendor}=="04b8", SYSFS{idProduct}=="082e", MODE="664", GROUP="scanner"
Die Ausgabe von epson.conf:
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend.
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0
usb 0x4b8 0x082e
wäre super wenn jemand weiter weiss!
Danke.
LG
shino
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
aso ja.. das System ist Linux Mint... auf Ubuntubasis.
Zuletzt bearbeitet: