Suspend <----> WPA/PSK

Dieses Thema im Forum "SuSE / OpenSuSE" wurde erstellt von Aldaris, 12.01.2006.

  1. #1 Aldaris, 12.01.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Hi Leute, nachdem ich meinen Kampf mit WLAN und WPA und verschiedenen Profilen dank der großartigen Hilfe von devilz mit Hilfe des Profil-Managers gelöst habe, stoße ich auf das nächste Problem.
    Wenn ich das System in der Ruhezustand oder Suspend oder Standby oder was auch immer versetzte, funktioniert das mit dem Wiederhochfahren auch sehr gut, aber mein Internet geht nicht mehr.
    Hab im Suse Forum irgendwo gelesen, dass das was mit der WPA Verschlüsselung zu tun hat, diese soll man irgendwo ausschalten können, aber das hilft mir nicht, da ich diese ja benutze. Auch ein Profilwechsel löst das Problem nicht.

    (IBM Thinkpad, Suse 10.0, ipw2200, mit YOU Up-To-Date)

    Danke

    Btw: Wie Editier ich eigentlich Beiträge, hab da irgendwie ein Brett vorm Kopf

    P.S.: Ihr habt hier echt ein total tolles Forum, was mir schon sehr oft geholfen hat und mich mittlerweile dazu gebracht hat, Windows komplett von meinem Laptop zu verbannen.
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Hmmm ... auch ein rcnetwork restart bringt es nicht ?
    Eventl. ist das auch ein Bug im ipw2200 Treiber :/
     
  4. #3 Aldaris, 12.01.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Danke für den Versuch, also renetwork restart hilft leider nicht, spricht von keiner Fehlermeldung, ist alles OK, allerdings kein Netzwerk, kann mich selber pingen, sonst niemanden, werder Router geschweige denn andere Rechner. Ich hatte vergessen zu sagen, dass die einzige Möglichkeit das Netzwerk einzurichten darin bestand, es mit Yast zu konfigurieren (Oder dann mit dem Profilmanager)
     
  5. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Kannst du mal schauen ob du was im syslog (dmesg) dazu findest?
    Eventl. lässt sich der Treiber nach dem suspend nicht mehr richtig ansprechen - falls das so sein sollte, würde ich mal eine Bugmeldung machen.
     
  6. #5 Aldaris, 13.01.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    öhm, dass hier:
    dmesg:
    Code:
    Linux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
     BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
     BIOS-e820: 000000001f6e0000 - 000000001f6f7000 (ACPI data)
     BIOS-e820: 000000001f6f7000 - 000000001f6f9000 (ACPI NVS)
     BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    502MB LOWMEM available.
    On node 0 totalpages: 128736
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 124640 pages, LIFO batch:31
      HighMem zone: 0 pages, LIFO batch:1
    DMI present.
    ACPI: RSDP (v002 IBM                                   ) @ 0x000f6fa0
    ACPI: XSDT (v001 IBM    TP-1U    0x00001650  LTP 0x00000000) @ 0x1f6e822e
    ACPI: FADT (v003 IBM    TP-1U    0x00001650 IBM  0x00000001) @ 0x1f6e8300
    ACPI: SSDT (v001 IBM    TP-1U    0x00001650 MSFT 0x0100000e) @ 0x1f6e84b4
    ACPI: ECDT (v001 IBM    TP-1U    0x00001650 IBM  0x00000001) @ 0x1f6f6df9
    ACPI: TCPA (v001 IBM    TP-1U    0x00001650 PTL  0x00000001) @ 0x1f6f6e4b
    ACPI: MADT (v001 IBM    TP-1U    0x00001650 IBM  0x00000001) @ 0x1f6f6e7d
    ACPI: BOOT (v001 IBM    TP-1U    0x00001650  LTP 0x00000001) @ 0x1f6f6fd8
    ACPI: DSDT (v001 IBM    TP-1U    0x00001650 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: local apic disabled
    Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda2 vga=0x314 selinux=0    resume=/dev/hda1  splash=silent PROFILE=Aachen
    bootsplash: silent mode.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 1196.270 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 504920k/514944k available (2029k kernel code, 9508k reserved, 695k data, 204k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 2394.35 BogoMIPS (lpj=4788711)
    Security Framework v1.0.0 initialized
    SELinux:  Disabled at boot.
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 1024K
    CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    mtrr: v2.0 (20020519)
    CPU: Intel(R) Pentium(R) M processor 1200MHz stepping 05
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    checking if image is initramfs... it is
    Freeing initrd memory: 1700k freed
    ACPI: Looking for DSDT in initrd... not found!
     not found!
    ACPI: setting ELCR to 0200 (from 0800)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8c8, last bus=5
    PCI: Using configuration type 1
    ACPI: Subsystem revision 20050408
    ACPI: Found ECDT
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
    Boot video device is 0000:00:02.0
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: Embedded Controller [EC] (gpe 28)
    ACPI: Power Resource [PUBS] (on)
    request_module: runaway loop modprobe char-major-1-11
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    TC classifier action (bugs to [email]netdev@vger.kernel.org[/email] cc [email]hadi@cyberus.ca[/email])
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bus 3, cardbus bridge: 0000:02:00.0
      IO window: 00003000-00003fff
      IO window: 00004000-00004fff
      PREFETCH window: f0000000-f1ffffff
      MEM window: d2000000-d3ffffff
    PCI: Bridge: 0000:00:1e.0
      IO window: 3000-7fff
      MEM window: d0200000-dfffffff
      PREFETCH window: f0000000-f7ffffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
        ACPI-0212: *** Warning: Device is not power manageable
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1137175593.292:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    vesafb: framebuffer at 0xe0000000, mapped to 0xe0080000, using 3750k, total 8000k
    vesafb: mode is 800x600x16, linelength=1600, pages=7
    vesafb: protected mode interface info at 00ff:44f0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
    Console: switching to colour frame buffer device 99x34
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
        ACPI-0212: *** Warning: Device is not power manageable
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    loop: loaded (max 8 devices)
    mice: PS/2 mouse device common for all mice
    input: PC Speaker
    md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 3.38
    NET: Registered protocol family 2
    input: AT Translated Set 2 keyboard on isa0060/serio0
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Using IPI Shortcut mode
    ACPI wakeup devices:
     LID SLPB PCI0 PCI1 DOCK USB0 USB1 USB2 AC9M
    ACPI: (supports S0 S3 S4 S5)
    Freeing unused kernel memory: 204k freed
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH4: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    ICH4: chipset revision 1
    ICH4: not 100% native mode: will probe irqs later
        ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
        ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:pio, hdd:pio
    Probing IDE interface ide0...
    hda: HITACHI_DK13FA-40B, ATA DISK drive
    input: PS/2 Generic Mouse on isa0060/serio1
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 128KiB
    hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
    hda: cache flushes supported
     hda: hda1 hda2
    Probing IDE interface ide1...
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU] (supports 8 throttling states)
    ACPI: Thermal Zone [THM0] (32 C)
    Attempting manual resume
    swsusp: Suspend partition has wrong signature?
    ReiserFS: hda2: found reiserfs format "3.6" with standard journal
    ReiserFS: hda2: using ordered data mode
    ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda2: checking transaction log (hda2)
    ReiserFS: hda2: Using r5 hash to sort names
    bootsplash: status on console 0 changed to on
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    Adding 1020088k swap on /dev/hda1.  Priority:-1 extents:1
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email]dm-devel@redhat.com[/email]
    lp: driver loaded but no devices found
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel 855 Chipset.
    agpgart: Detected 8060K stolen memory.
    agpgart: AGP aperture is 128M @ 0xe0000000
    usb 2-1: new full speed USB device using uhci_hcd and address 2
    hw_random: RNG not detected
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
    shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
    shpchp: acpi_shpchprm:   Slot sun(1) at s:b:d:f=0x00:02:00:00
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    usb 2-1: USB disconnect, address 2
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:02:00.0 [1014:0555]
    ath_hal: module license 'Proprietary' taints kernel.
    ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
    cs: IO port probe 0x3000-0x7fff: clean.
    pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
    pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
    wlan: 0.8.6.0 (EXPERIMENTAL)
    ath_rate_sample: module not supported by Novell, setting U taint flag.
    ath_rate_sample: no version for "ether_sprintf" found: kernel tainted.
    ath_rate_sample: 1.2
    ath_pci: 0.9.6.0 (EXPERIMENTAL)
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
    Build date: Nov 29 2005
    Debugging version (IEEE80211)
    ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    ath0: H/W encryption support: WEP AES AES_CCM TKIP
    ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
    ath0: Use hw queue 1 for WME_AC_BE traffic
    ath0: Use hw queue 0 for WME_AC_BK traffic
    ath0: Use hw queue 2 for WME_AC_VI traffic
    ath0: Use hw queue 3 for WME_AC_VO traffic
    ath0: Use hw queue 8 for CAB traffic
    ath0: Use hw queue 9 for beacons
    Debugging version (ATH)
    ath0: Atheros 5212: mem=0xd0200000, irq=11
    usb 4-3: new high speed USB device using ehci_hcd and address 2
    Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
    Copyright (c) 1999-2005 Intel Corporation.
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    SCSI subsystem initialized
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    Bluetooth: Core ver 2.7
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: HCI USB driver ver 2.8
    usbcore: registered new driver hci_usb
    Bluetooth: L2CAP ver 2.7
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    Bluetooth: RFCOMM ver 1.5
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
    cs: IO port probe 0xc00-0xcff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    intel8x0_measure_ac97_clock: measured 55439 usecs
    intel8x0: clocking to 48000
    bootsplash: status on console 0 changed to on
      Vendor: IOMEGA    Model: CDRW55292EXT3-C   Rev: 010W
      Type:   CD-ROM                             ANSI SCSI revision: 00
    usb-storage: device scan complete
    sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
    NET: Registered protocol family 17
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c036b920(lo)
    IPv6 over IPv4 tunneling driver
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    microcode: CPU0 not 'upgrading' to earlier revision 0x5 (current=0x7)
    microcode: No new microcode data for CPU0
    IA-32 Microcode Update Driver v1.14 unregistered
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Sleep Button (CM) [SLPB]
    slamr: module not supported by Novell, setting U taint flag.
    slamr: SmartLink AMRMO modem.
    slamr: probe 8086:24c6 ICH4 card...
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.6 to 64
    slamr: mc97 codec is CXT23
    slamr: slamr0 is ICH4 card.
    slusb: module not supported by Novell, setting U taint flag.
    ST7554 USB Modem.
    usbcore: registered new driver ST7554 USB Modem
    ibm_acpi: IBM ThinkPad ACPI Extras v0.11
    ibm_acpi: [url]http://ibm-acpi.sf.net/[/url]
        ACPI-0077: *** Warning: No context for object [df6c1ba0]
    ibm_acpi: dock device not present
        ACPI-0077: *** Warning: No context for object [df6c1620]
    ibm_acpi: bay device not present
    bootsplash: status on console 0 changed to on
    eth0: no IPv6 routers present
    ath0: no IPv6 routers present
    subfs 0.9
    ISO 9660 Extensions: Microsoft Joliet Level 1
    ISOFS: changing to secondary root
    bootsplash: status on console 0 changed to on
    [drm] Initialized drm 1.0.0 20040925
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x400000
    [drm] Initialized i915 1.1.0 20040405 on minor 0:
        ACPI-0212: *** Warning: Device is not power manageable
    mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x400000
    [drm] Initialized i915 1.1.0 20040405 on minor 1:
    mtrr: base(0xe0020000) is not aligned on a size(0x300000) boundary
    mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x400000
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    usbcore: deregistering driver ST7554 USB Modem
    usbcore: deregistering driver usb-storage
    uhci_hcd 0000:00:1d.2: remove, state 1
    usb usb3: USB disconnect, address 1
    usb 3-1: USB disconnect, address 2
    uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
    ACPI: PCI interrupt for device 0000:00:1d.2 disabled
    uhci_hcd 0000:00:1d.1: remove, state 1
    usb usb2: USB disconnect, address 1
    uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
    ACPI: PCI interrupt for device 0000:00:1d.1 disabled
    uhci_hcd 0000:00:1d.0: remove, state 1
    usb usb1: USB disconnect, address 1
    uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
    ACPI: PCI interrupt for device 0000:00:1d.0 disabled
    Stopping tasks: ===================================================================================|
    Freeing memory... done (94231 pages freed)
    ACPI: PCI interrupt for device 0000:02:02.0 disabled
    ACPI: PCI interrupt for device 0000:02:01.0 disabled
    ACPI: PCI interrupt for device 0000:02:00.0 disabled
    ACPI: PCI interrupt for device 0000:00:1f.5 disabled
    ACPI: PCI interrupt for device 0000:00:1d.7 disabled
    swsusp: Need to copy 26727 pages
    swsusp: Restoring Highmem
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    usb 4-3: USB disconnect, address 2
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
    usb 4-3: new high speed USB device using ehci_hcd and address 4
    ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
    Restarting tasks... done
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    Initializing USB Mass Storage driver...
    scsi1 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 4
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    slamr: module not supported by Novell, setting U taint flag.
    slamr: SmartLink AMRMO modem.
    slamr: probe 8086:24c6 ICH4 card...
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.6 to 64
    slamr: mc97 codec is CXT23
    slamr: slamr0 is ICH4 card.
    slusb: module not supported by Novell, setting U taint flag.
    ST7554 USB Modem.
    usbcore: registered new driver ST7554 USB Modem
      Vendor: IOMEGA    Model: CDRW55292EXT3-C   Rev: 010W
      Type:   CD-ROM                             ANSI SCSI revision: 00
    sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
    Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0,  type 5
    usb-storage: device scan complete
    ISO 9660 Extensions: Microsoft Joliet Level 1
    ISOFS: changing to secondary root
    ISO 9660 Extensions: Microsoft Joliet Level 1
    ISOFS: changing to secondary root
    
    
     
  7. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Code:
    wlan: 0.8.6.0 (EXPERIMENTAL)ath_rate_sample: module not supported by Novell, setting U taint flag.
    ath_rate_sample: no version for "ether_sprintf" found: kernel tainted.
    ath_rate_sample: 1.2ath_pci: 0.9.6.0 (EXPERIMENTAL)
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
    Build date: Nov 29 2005Debugging version (IEEE80211)
    ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbpsath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbpsath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    ath0: H/W encryption support: WEP AES AES_CCM TKIPath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
    ath0: Use hw queue 1 for WME_AC_BE traffic
    ath0: Use hw queue 0 for WME_AC_BK traffic
    ath0: Use hw queue 2 for WME_AC_VI traffic
    ath0: Use hw queue 3 for WME_AC_VO traffic
    ath0: Use hw queue 8 for CAB traffic
    ath0: Use hw queue 9 for beaconsDebugging version (ATH)
    ath0: Atheros 5212: mem=0xd0200000, irq=11
    
    Ich sehe jetzt nix extrem auffälliges ...
     
  8. #7 Aldaris, 13.01.2006
    Aldaris

    Aldaris Mitglied

    Dabei seit:
    23.11.2005
    Beiträge:
    34
    Zustimmungen:
    0
    Aber warum geht es dann nicht............seltsam. Werde mal weiter googlen
     
  9. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  10. #8 MrFenix, 13.01.2006
    MrFenix

    MrFenix Executor

    Dabei seit:
    16.10.2004
    Beiträge:
    480
    Zustimmungen:
    0
    Ort:
    Siegen, NRW
    Mal probiert jemanden im lokalen netzwerk zu pingen oder so?
    vielleicht geht ja nur das inet nicht mehr
     
  11. #9 Cappy, 13.01.2006
    Zuletzt bearbeitet: 13.01.2006
    Cappy

    Cappy Eroberer

    Dabei seit:
    13.06.2005
    Beiträge:
    73
    Zustimmungen:
    0
    Hallo !

    Ich hab' mir gerade mal die Dmesg- ausgabe angeschaut.
    Vielleicht liegt das Problem darin, das sich die WLan- Karte und der USB den IRQ teilen?
    Versuch mal, ob du im Bios einem der beiden Geräte einen anderen IRQ zuweisen kannst.
    Vielleicht kannst du die WLan Karte auf IRQ 5 (LTP2) legen?

    Gruß Cappy!
     
Thema:

Suspend <----> WPA/PSK

Die Seite wird geladen...

Suspend <----> WPA/PSK - Ähnliche Themen

  1. Linux Suspend Daemon vorgestellt

    Linux Suspend Daemon vorgestellt: Kernel-Hacker Neil Brown hat die erste Version eines Daemons entwickelt, der das System schlafen legt, wenn es nichts zu tun hat, und dem Benutzer...
  2. Festplatte friert ein nach suspend/resume

    Festplatte friert ein nach suspend/resume: Hallo, ich habe ein altes Macbook 3.1 mit einer Vertex 2. Ich benutze Archlinux mit kernel 3.0.2, wenn ich das Macbook mit den pm-utils zum...
  3. pm-suspend sehr langsam

    pm-suspend sehr langsam: Hallo zusammen Ich habe auf meinem neuen Sony Vaio VPCw12S1E ein CrunchBang 10 mit wmii installiert. Soweit funktioniert alles prächtig....
  4. Fehlermeldung bei boot und suspend (Debian)

    Fehlermeldung bei boot und suspend (Debian): Wenn ich meinen Rechner aus suspend to ram aufwache erhalte ich folgende Fehlermeldung und nix geht mehr, muss manuell aus und wieder einschalten:...
  5. Aus dem Suspend-To-Disk aufwachen

    Aus dem Suspend-To-Disk aufwachen: Hi ich habe heute mal mit den Energiesparfunktionen von kpowersave experimentiert, da ich auf die Macbook-User neidisch bin :) Ich wollte eig....