rars

Dieses Thema im Forum "Games" wurde erstellt von kimi, 10.06.2008.

  1. kimi

    kimi blub

    Dabei seit:
    20.12.2006
    Beiträge:
    425
    Zustimmungen:
    0
    Ort:
    Tuttlingen
    hallo leute,

    hat hier noch jemand RARS installiert, den vorgänger von TORCS, oder es mal versucht? Mich würde es nämlich echt mal reizen, dieses Spiel auszuprobieren, nur um halt mal das zu sehen, ohne großen hintergrund. Herunterladen kann man einen Source noch, jedoch keine Pakete mehr.
    Ich bekomme schon Fehlermeldungen beim ./configure und wollte jetzt mal fragen ob es jemand schon versucht hat. ich habe kubuntu gutsy laufen.

    grüße

    kimi
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 kartoffel200, 10.06.2008
    Zuletzt bearbeitet: 10.06.2008
    kartoffel200

    kartoffel200 AMD Fanboy Since 2003

    Dabei seit:
    12.03.2007
    Beiträge:
    938
    Zustimmungen:
    0
    Ort:
    L wie localhost
    Poste bitte deine Fehlermeldung, dann kann dir sicherlich weitergeholfen werden.

    Edit:
    Hab eben mit Fedora 7 getestet der schmeißt keinen Fehler raus scheint also keine abhängigkeiten mit irgend welchen Programmversionen zu geben.


    Hast du alle wichtigen Compiler etc. , denn das ist ja bei Ubuntu nicht vorinstalliert?
     
  4. kimi

    kimi blub

    Dabei seit:
    20.12.2006
    Beiträge:
    425
    Zustimmungen:
    0
    Ort:
    Tuttlingen
    @kartoffel200:
    danke,
    ich habe die build-essentials installiert, die hierfür ja nötig wären. Die Fehlermeldung ist jedoch eine andere:
    Code:
     ...
    checking for libz... -lz
    checking for libpng... -lpng -lz -lm
    checking for libjpeg6b... no
    checking for libjpeg... -ljpeg
    checking for Qt... configure: error: Qt (>= Qt 3.0.3) (headers and libraries) not found. Please check your installation!
    For more details about this problem, look at the end of config.log.
    Mein Problem:
    ich habe die qt-pakete alle installiert (zumindest laut ubuntuusers.de).:
    Folgende Pakete müssen installiert [1] werden:
    Code:
        *
    
          libqt4-core
        *
    
          libqt4-dev
        *
    
          qt4-dev-tools (universe, [2])
        *
    
          qt4-designer
        *
    
          qt4-doc
    Nun weiß ich halt nicht, was ich in diesem fall machen soll? weil versionsprobleme sollte es ja eigentlich mit ">= 3.0.3" nicht geben...

    falls noch mehr infos gebraucht werden, dann bitte melden.

    In der Installationslanleitung finde ich folgendes:
    Jedoch peil ich da nicht ganz durch, auch wenn das wahrscheinlich mein problem ist. könnte mir das jemand erklären?

    config.log:

    Code:
    This file contains any messages produced by compilers while
    running configure, to aid debugging if configure makes a mistake.
    
    It was created by configure, which was
    generated by GNU Autoconf 2.52.  Invocation command line was
    
      $ ./configure 
    
    ## ---------- ##
    ## Platform.  ##
    ## ---------- ##
    
    hostname = Sebastian
    uname -m = i686
    uname -r = 2.6.22-14-generic
    uname -s = Linux
    uname -v = #1 SMP Tue Feb 12 07:42:25 UTC 2008
    
    /usr/bin/uname -p = unknown
    /bin/uname -X     = unknown
    
    /bin/arch              = unknown
    /usr/bin/arch -k       = unknown
    /usr/convex/getsysinfo = unknown
    hostinfo               = unknown
    /bin/machine           = unknown
    /usr/bin/oslevel       = unknown
    /bin/universe          = unknown
    
    PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
    
    ## ------------ ##
    ## Core tests.  ##
    ## ------------ ##
    
    configure:1162: PATH=".;."; conftest.sh
    ./configure: 1169: conftest.sh: not found
    configure:1165: $? = 127
    configure:1207: checking build system type
    configure:1225: result: i686-pc-linux-gnu
    configure:1235: checking host system type
    configure:1249: result: i686-pc-linux-gnu
    configure:1259: checking target system type
    configure:1273: result: i686-pc-linux-gnu
    configure:1317: checking for a BSD compatible install
    configure:1366: result: /usr/bin/install -c
    configure:1380: checking for -p flag to install
    configure:1393: result: yes
    configure:1404: checking whether build environment is sane
    configure:1447: result: yes
    configure:1468: checking for mawk
    configure:1483: found /usr/bin/mawk
    configure:1491: result: mawk
    configure:1501: checking whether make sets ${MAKE}
    configure:1521: result: yes
    configure:1646: checking for style of include used by make
    configure:1673: result: GNU
    configure:1794: checking for gcc
    configure:1809: found /usr/bin/gcc
    configure:1817: result: gcc
    configure:2045: checking for C compiler version
    configure:2048: gcc --version </dev/null >&5
    gcc (GCC) 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    configure:2051: $? = 0
    configure:2053: gcc -v </dev/null >&5
    Using built-in specs.
    Target: i486-linux-gnu
    Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.1.3 --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
    Thread model: posix
    gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
    configure:2056: $? = 0
    configure:2058: gcc -V </dev/null >&5
    gcc: '-V' option must have argument
    configure:2061: $? = 1
    configure:2081: checking for C compiler default output
    configure:2084: gcc     conftest.c  >&5
    configure:2087: $? = 0
    configure:2116: result: a.out
    configure:2121: checking whether the C compiler works
    configure:2127: ./a.out
    configure:2130: $? = 0
    configure:2145: result: yes
    configure:2152: checking whether we are cross compiling
    configure:2154: result: no
    configure:2157: checking for executable suffix
    configure:2159: gcc -o conftest     conftest.c  >&5
    configure:2162: $? = 0
    configure:2184: result: 
    configure:2190: checking for object suffix
    configure:2208: gcc -c    conftest.c >&5
    configure:2211: $? = 0
    configure:2230: result: o
    configure:2234: checking whether we are using the GNU C compiler
    configure:2255: gcc -c    conftest.c >&5
    configure:2258: $? = 0
    configure:2261: test -s conftest.o
    configure:2264: $? = 0
    configure:2276: result: yes
    configure:2282: checking whether gcc accepts -g
    configure:2300: gcc -c -g  conftest.c >&5
    configure:2303: $? = 0
    configure:2306: test -s conftest.o
    configure:2309: $? = 0
    configure:2319: result: yes
    configure:2346: gcc -c    conftest.c >&5
    conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
    configure:2349: $? = 1
    configure: failed program was:
    #ifndef __cplusplus
      choke me
    #endif
    configure:2449: checking dependency style of gcc
    configure:2511: result: gcc3
    configure:2520: checking how to run the C preprocessor
    configure:2546: gcc -E  conftest.c
    configure:2552: $? = 0
    configure:2579: gcc -E  conftest.c
    configure:2576:28: error: ac_nonexistent.h: No such file or directory
    configure:2585: $? = 1
    configure: failed program was:
    #line 2575 "configure"
    #include "confdefs.h"
    #include <ac_nonexistent.h>
    configure:2622: result: gcc -E
    configure:2637: gcc -E  conftest.c
    configure:2643: $? = 0
    configure:2670: gcc -E  conftest.c
    configure:2667:28: error: ac_nonexistent.h: No such file or directory
    configure:2676: $? = 1
    configure: failed program was:
    #line 2666 "configure"
    #include "confdefs.h"
    #include <ac_nonexistent.h>
    configure:2791: checking for g++
    configure:2806: found /usr/bin/g++
    configure:2814: result: g++
    configure:2829: checking for C++ compiler version
    configure:2832: g++ --version </dev/null >&5
    g++ (GCC) 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    configure:2835: $? = 0
    configure:2837: g++ -v </dev/null >&5
    Using built-in specs.
    Target: i486-linux-gnu
    Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.1.3 --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
    Thread model: posix
    gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
    configure:2840: $? = 0
    configure:2842: g++ -V </dev/null >&5
    g++: '-V' option must have argument
    configure:2845: $? = 1
    configure:2848: checking whether we are using the GNU C++ compiler
    configure:2869: g++ -c    conftest.cc >&5
    configure:2872: $? = 0
    configure:2875: test -s conftest.o
    configure:2878: $? = 0
    configure:2890: result: yes
    configure:2896: checking whether g++ accepts -g
    configure:2914: g++ -c -g  conftest.cc >&5
    configure:2917: $? = 0
    configure:2920: test -s conftest.o
    configure:2923: $? = 0
    configure:2933: result: yes
    configure:2973: g++ -c    conftest.cc >&5
    configure:2976: $? = 0
    configure:2979: test -s conftest.o
    configure:2982: $? = 0
    configure:3004: g++ -c    conftest.cc >&5
    configure: In function 'int main()':
    configure:2997: error: 'exit' was not declared in this scope
    configure:3007: $? = 1
    configure: failed program was:
    #line 2992 "configure"
    #include "confdefs.h"
    
    int
    main ()
    {
    exit (42);
      ;
      return 0;
    }
    configure:2973: g++ -c    conftest.cc >&5
    configure:2976: $? = 0
    configure:2979: test -s conftest.o
    configure:2982: $? = 0
    configure:3004: g++ -c    conftest.cc >&5
    configure:3007: $? = 0
    configure:3010: test -s conftest.o
    configure:3013: $? = 0
    configure:3037: checking dependency style of g++
    configure:3099: result: gcc3
    configure:3630: checking whether g++ supports -fno-exceptions
    configure:3660: rm -rf SunWS_cache; g++ -o conftest -O2   -fno-exceptions   conftest.cc  1>&5
    configure:3663: $? = 0
    configure:3666: test -s conftest
    configure:3669: $? = 0
    configure:3687: result: yes
    configure:3698: checking whether g++ supports -fno-check-new
    configure:3728: rm -rf SunWS_cache; g++ -o conftest -O2   -fno-exceptions -fno-check-new   conftest.cc  1>&5
    configure:3731: $? = 0
    configure:3734: test -s conftest
    configure:3737: $? = 0
    configure:3755: result: yes
    configure:3766: checking whether g++ supports -fexceptions
    configure:3796: rm -rf SunWS_cache; g++ -o conftest -O2   -fno-exceptions -fno-check-new -fexceptions   conftest.cc  1>&5
    configure:3799: $? = 0
    configure:3802: test -s conftest
    configure:3805: $? = 0
    configure:3823: result: yes
    configure:4364: checking how to run the C++ preprocessor
    configure:4386: g++ -E  conftest.cc
    configure:4392: $? = 0
    configure:4419: g++ -E  conftest.cc
    configure:4416:28: error: ac_nonexistent.h: No such file or directory
    configure:4425: $? = 1
    configure: failed program was:
    #line 4415 "configure"
    #include "confdefs.h"
    #include <ac_nonexistent.h>
    configure:4462: result: g++ -E
    configure:4477: g++ -E  conftest.cc
    configure:4483: $? = 0
    configure:4510: g++ -E  conftest.cc
    configure:4507:28: error: ac_nonexistent.h: No such file or directory
    configure:4516: $? = 1
    configure: failed program was:
    #line 4506 "configure"
    #include "confdefs.h"
    #include <ac_nonexistent.h>
    configure:4604: checking whether g++ supports -frepo
    configure:4634: rm -rf SunWS_cache; g++ -o conftest -O2 -fno-exceptions -fno-check-new -frepo   conftest.cc  1>&5
    In file included from <built-in>:0:
    <built-in>:0: warning: -frepo must be used with -c
    configure:4637: $? = 0
    configure:4640: test -s conftest
    configure:4643: $? = 0
    configure:4661: result: yes
    configure:4867: checking for ld used by GCC
    configure:4931: result: /usr/bin/ld
    configure:4940: checking if the linker (/usr/bin/ld) is GNU ld
    GNU ld (GNU Binutils for Ubuntu) 2.18
    configure:4952: result: yes
    configure:4956: checking for /usr/bin/ld option to reload object files
    configure:4963: result: -r
    configure:4972: checking for BSD-compatible nm
    configure:5007: result: /usr/bin/nm -B
    configure:5011: checking for a sed that does not truncate output
    configure:5087: result: 
    configure:5090: checking whether ln -s works
    configure:5094: result: yes
    configure:5101: checking how to recognise dependant libraries
    configure:5288: result: pass_all
    configure:5421: checking for dlfcn.h
    configure:5431: gcc -E  conftest.c
    configure:5437: $? = 0
    configure:5456: result: yes
    configure:5469: checking the maximum length of command line arguments
    configure:5517: result: 32768
    configure:5525: checking command to parse /usr/bin/nm -B output from gcc object
    configure:5610: gcc -c -O2    conftest.c >&5
    configure:5613: $? = 0
    configure:5617: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/  /p' \> conftest.nm
    configure:5620: $? = 0
    configure:5672: gcc -o conftest -O2     conftest.c conftstm.o >&5
    configure:5675: $? = 0
    configure:5713: result: ok
    configure:5717: checking for objdir
    configure:5732: result: .libs
    configure:5815: checking for ranlib
    configure:5830: found /usr/bin/ranlib
    configure:5839: result: ranlib
    configure:5889: checking for strip
    configure:5904: found /usr/bin/strip
    configure:5913: result: strip
    configure:6170: checking if gcc static flag  works
    configure:6193: result: yes
    configure:6207: checking if gcc supports -fno-rtti -fno-exceptions
    cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
    cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
    configure:6231: result: no
    configure:6246: checking for gcc option to produce PIC
    configure:6399: result: -fPIC
    configure:6406: checking if gcc PIC flag -fPIC works
    configure:6430: result: yes
    configure:6454: checking if gcc supports -c -o file.o
    configure:6495: result: yes
    configure:6520: checking whether the gcc linker (/usr/bin/ld) supports shared libraries
    configure:7293: result: yes
    configure:7315: checking whether -lc should be explicitly linked in
    configure:7320: gcc -c -O2    conftest.c >&5
    configure:7323: $? = 0
    configure:7337: gcc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
    configure:7340: $? = 0
    configure:7352: result: no
    configure:7358: checking how to hardcode library paths into programs
    configure:7382: result: immediate
    configure:7396: checking whether stripping libraries is possible
    configure:7401: result: yes
    configure:7408: checking dynamic linker characteristics
    configure:7850: result: GNU/Linux ld.so
    configure:7875: checking for shl_load
    configure:7912: gcc -o conftest -O2     conftest.c  >&5
    /tmp/cca3dJIi.o: In function `main':
    conftest.c:(.text+0x16): undefined reference to `shl_load'
    collect2: ld returned 1 exit status
    configure:7915: $? = 1
    configure: failed program was:
    #line 7881 "configure"
    #include "confdefs.h"
    /* System header to define __stub macros and hopefully few prototypes,
        which can conflict with char shl_load (); below.  */
    #include <assert.h>
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char shl_load ();
    char (*f) ();
    
    int
    main ()
    {
    /* The GNU C library defines this for functions which it implements
        to always fail with ENOSYS.  Some functions are actually named
        something starting with __ and the normal name is an alias.  */
    #if defined (__stub_shl_load) || defined (__stub___shl_load)
    choke me
    #else
    f = shl_load;
    #endif
    
      ;
      return 0;
    }
    configure:7931: result: no
    configure:7936: checking for shl_load in -ldld
    configure:7963: gcc -o conftest -O2     conftest.c -ldld   >&5
    /usr/bin/ld: cannot find -ldld
    collect2: ld returned 1 exit status
    configure:7966: $? = 1
    configure: failed program was:
    #line 7944 "configure"
    #include "confdefs.h"
    
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char shl_load ();
    int
    main ()
    {
    shl_load ();
      ;
      return 0;
    }
    configure:7983: result: no
    configure:7988: checking for dlopen
    configure:8025: gcc -o conftest -O2     conftest.c  >&5
    /tmp/ccOXDtDv.o: In function `main':
    conftest.c:(.text+0x16): undefined reference to `dlopen'
    collect2: ld returned 1 exit status
    configure:8028: $? = 1
    configure: failed program was:
    #line 7994 "configure"
    #include "confdefs.h"
    /* System header to define __stub macros and hopefully few prototypes,
        which can conflict with char dlopen (); below.  */
    #include <assert.h>
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char dlopen ();
    char (*f) ();
    
    int
    main ()
    {
    /* The GNU C library defines this for functions which it implements
        to always fail with ENOSYS.  Some functions are actually named
        something starting with __ and the normal name is an alias.  */
    #if defined (__stub_dlopen) || defined (__stub___dlopen)
    choke me
    #else
    f = dlopen;
    #endif
    
      ;
      return 0;
    }
    configure:8044: result: no
    configure:8049: checking for dlopen in -ldl
    configure:8076: gcc -o conftest -O2     conftest.c -ldl   >&5
    configure:8079: $? = 0
    configure:8082: test -s conftest
    configure:8085: $? = 0
    configure:8096: result: yes
    configure:8236: checking whether a program can dlopen itself
    configure:8308: gcc -o conftest -O2    -DHAVE_DLFCN_H  -Wl,--export-dynamic conftest.c -ldl  >&5
    configure: In function 'main':
    configure:8304: warning: incompatible implicit declaration of built-in function 'exit'
    configure:8311: $? = 0
    configure:8328: result: yes
    configure:8333: checking whether a statically linked program can dlopen itself
    configure:8405: gcc -o conftest -O2    -DHAVE_DLFCN_H  -Wl,--export-dynamic  conftest.c -ldl  >&5
    configure: In function 'main':
    configure:8401: warning: incompatible implicit declaration of built-in function 'exit'
    configure:8408: $? = 0
    configure:8425: result: yes
    configure:8447: checking if libtool supports shared libraries
    configure:8449: result: yes
    configure:8452: checking whether to build shared libraries
    configure:8473: result: yes
    configure:8476: checking whether to build static libraries
    configure:8480: result: no
    configure:8559: creating libtool
    configure:9277: checking whether the g++ linker (/usr/bin/ld) supports shared libraries
    configure:9922: result: yes
    configure:9938: g++ -c -O2 -fno-exceptions -fno-check-new  conftest.cc >&5
    configure:9941: $? = 0
    configure:10041: checking for g++ option to produce PIC
    configure:10277: result: -fPIC
    configure:10284: checking if g++ PIC flag -fPIC works
    configure:10308: result: yes
    configure:10332: checking if g++ supports -c -o file.o
    configure:10373: result: yes
    configure:10398: checking whether the g++ linker (/usr/bin/ld) supports shared libraries
    configure:10420: result: yes
    configure:10442: checking whether -lc should be explicitly linked in
    configure:10447: g++ -c -O2 -fno-exceptions -fno-check-new  conftest.cc >&5
    configure:10450: $? = 0
    configure:10464: g++ -shared -nostdlib  conftest.o   -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
    configure:10467: $? = 1
    configure:10479: result: yes
    configure:10485: checking how to hardcode library paths into programs
    configure:10509: result: immediate
    configure:10523: checking whether stripping libraries is possible
    configure:10528: result: yes
    configure:10535: checking dynamic linker characteristics
    configure:10977: result: GNU/Linux ld.so
    configure:11002: checking for shl_load
    configure:11058: result: no
    configure:11063: checking for shl_load in -ldld
    configure:11110: result: no
    configure:11115: checking for dlopen
    configure:11171: result: no
    configure:11176: checking for dlopen in -ldl
    configure:11223: result: yes
    configure:11363: checking whether a program can dlopen itself
    configure:11455: result: yes
    configure:11460: checking whether a statically linked program can dlopen itself
    configure:11552: result: yes
    configure:11984: checking if gcj supports -fno-rtti -fno-exceptions
    configure:12008: result: no
    configure:12023: checking for gcj option to produce PIC
    configure:12176: result: -fPIC
    configure:12183: checking if gcj PIC flag -fPIC works
    configure:12207: result: no
    configure:12231: checking if gcj supports -c -o file.o
    configure:12272: result: no
    configure:12297: checking whether the gcj linker (/usr/bin/ld) supports shared libraries
    configure:13070: result: yes
    configure:13092: checking whether -lc should be explicitly linked in
    configure:13097: gcj -c -O2    conftest.java >&5
    eval: 1: gcj: not found
    configure:13100: $? = 127
    configure:13129: result: yes
    configure:13135: checking how to hardcode library paths into programs
    configure:13159: result: immediate
    configure:13173: checking whether stripping libraries is possible
    configure:13178: result: yes
    configure:13185: checking dynamic linker characteristics
    configure:13627: result: GNU/Linux ld.so
    configure:13652: checking for shl_load
    configure:13708: result: no
    configure:13713: checking for shl_load in -ldld
    configure:13760: result: no
    configure:13765: checking for dlopen
    configure:13821: result: no
    configure:13826: checking for dlopen in -ldl
    configure:13873: result: yes
    configure:14013: checking whether a program can dlopen itself
    configure:14105: result: yes
    configure:14110: checking whether a statically linked program can dlopen itself
    configure:14202: result: yes
    configure:15134: checking for msgfmt
    configure:15161: result: /usr/bin/msgfmt
    configure:15170: checking for gmsgfmt
    configure:15199: result: /usr/bin/msgfmt
    configure:15215: checking for xgettext
    configure:15242: result: /usr/bin/xgettext
    configure:15320: checking for ANSI C header files
    configure:15334: gcc -E  conftest.c
    configure:15340: $? = 0
    configure:15427: gcc -o conftest -O2     conftest.c  >&5
    configure: In function 'main':
    configure:15419: warning: incompatible implicit declaration of built-in function 'exit'
    configure:15430: $? = 0
    configure:15432: ./conftest
    configure:15435: $? = 0
    configure:15448: result: yes
    configure:15464: checking for sys/types.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for sys/stat.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for stdlib.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for string.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for memory.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for strings.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for inttypes.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for stdint.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15464: checking for unistd.h
    configure:15476: gcc -c -O2    conftest.c >&5
    configure:15479: $? = 0
    configure:15482: test -s conftest.o
    configure:15485: $? = 0
    configure:15495: result: yes
    configure:15511: checking for main in -lutil
    configure:15531: gcc -o conftest -O2     conftest.c -lutil   >&5
    configure:15534: $? = 0
    configure:15537: test -s conftest
    configure:15540: $? = 0
    configure:15551: result: yes
    configure:15557: checking for main in -lcompat
    configure:15577: gcc -o conftest -O2     conftest.c -lcompat   >&5
    /usr/bin/ld: cannot find -lcompat
    collect2: ld returned 1 exit status
    configure:15580: $? = 1
    configure: failed program was:
    #line 15565 "configure"
    #include "confdefs.h"
    
    int
    main ()
    {
    main ();
      ;
      return 0;
    }
    configure:15597: result: no
    configure:15604: checking for crypt in -lcrypt
    configure:15631: gcc -o conftest -O2     conftest.c -lcrypt   >&5
    configure:15634: $? = 0
    configure:15637: test -s conftest
    configure:15640: $? = 0
    configure:15651: result: yes
    configure:15729: checking for socklen_t
    configure:15762: g++ -c -O2 -fno-exceptions -fno-check-new  conftest.cc >&5
    configure:15765: $? = 0
    configure:15768: test -s conftest.o
    configure:15771: $? = 0
    configure:15826: result: socklen_t
    configure:15846: checking for dnet_ntoa in -ldnet
    configure:15873: gcc -o conftest -O2     conftest.c -ldnet   >&5
    /usr/bin/ld: cannot find -ldnet
    collect2: ld returned 1 exit status
    configure:15876: $? = 1
    configure: failed program was:
    #line 15854 "configure"
    #include "confdefs.h"
    
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char dnet_ntoa ();
    int
    main ()
    {
    dnet_ntoa ();
      ;
      return 0;
    }
    configure:15893: result: no
    configure:15900: checking for dnet_ntoa in -ldnet_stub
    configure:15927: gcc -o conftest -O2     conftest.c -ldnet_stub   >&5
    /usr/bin/ld: cannot find -ldnet_stub
    collect2: ld returned 1 exit status
    configure:15930: $? = 1
    configure: failed program was:
    #line 15908 "configure"
    #include "confdefs.h"
    
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char dnet_ntoa ();
    int
    main ()
    {
    dnet_ntoa ();
      ;
      return 0;
    }
    configure:15947: result: no
    configure:15954: checking for inet_ntoa
    configure:15991: gcc -o conftest -O2     conftest.c  >&5
    configure:15994: $? = 0
    configure:15997: test -s conftest
    configure:16000: $? = 0
    configure:16010: result: yes
    configure:16068: checking for connect
    configure:16105: gcc -o conftest -O2     conftest.c  >&5
    configure:16108: $? = 0
    configure:16111: test -s conftest
    configure:16114: $? = 0
    configure:16124: result: yes
    configure:16183: checking for remove
    configure:16220: gcc -o conftest -O2     conftest.c  >&5
    configure:16223: $? = 0
    configure:16226: test -s conftest
    configure:16229: $? = 0
    configure:16239: result: yes
    configure:16299: checking for shmat
    configure:16336: gcc -o conftest -O2     conftest.c  >&5
    configure:16339: $? = 0
    configure:16342: test -s conftest
    configure:16345: $? = 0
    configure:16355: result: yes
    configure:16420: checking for res_init
    configure:16457: gcc -o conftest -O2     conftest.c  >&5
    /tmp/ccCXuIAh.o: In function `main':
    conftest.c:(.text+0x16): undefined reference to `res_init'
    collect2: ld returned 1 exit status
    configure:16460: $? = 1
    configure: failed program was:
    #line 16426 "configure"
    #include "confdefs.h"
    /* System header to define __stub macros and hopefully few prototypes,
        which can conflict with char res_init (); below.  */
    #include <assert.h>
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char res_init ();
    char (*f) ();
    
    int
    main ()
    {
    /* The GNU C library defines this for functions which it implements
        to always fail with ENOSYS.  Some functions are actually named
        something starting with __ and the normal name is an alias.  */
    #if defined (__stub_res_init) || defined (__stub___res_init)
    choke me
    #else
    f = res_init;
    #endif
    
      ;
      return 0;
    }
    configure:16476: result: no
    configure:16504: gcc -o conftest -O2     conftest.c   -lresolv >&5
    configure:16507: $? = 0
    configure:16510: test -s conftest
    configure:16513: $? = 0
    configure:16534: checking for killpg in -lucb
    configure:16561: gcc -o conftest -O2     conftest.c -lucb   >&5
    /usr/bin/ld: cannot find -lucb
    collect2: ld returned 1 exit status
    configure:16564: $? = 1
    configure: failed program was:
    #line 16542 "configure"
    #include "confdefs.h"
    
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char killpg ();
    int
    main ()
    {
    killpg ();
      ;
      return 0;
    }
    configure:16581: result: no
    configure:16648: checking for int
    configure:16669: gcc -c -O2    conftest.c >&5
    configure:16672: $? = 0
    configure:16675: test -s conftest.o
    configure:16678: $? = 0
    configure:16688: result: yes
    configure:16691: checking size of int
    configure:16855: gcc -o conftest -O2     conftest.c  >&5
    configure:16858: $? = 0
    configure:16860: ./conftest
    configure:16863: $? = 0
    configure:16879: result: 4
    configure:16885: checking for long
    configure:16906: gcc -c -O2    conftest.c >&5
    configure:16909: $? = 0
    configure:16912: test -s conftest.o
    configure:16915: $? = 0
    configure:16925: result: yes
    configure:16928: checking size of long
    configure:17092: gcc -o conftest -O2     conftest.c  >&5
    configure:17095: $? = 0
    configure:17097: ./conftest
    configure:17100: $? = 0
    configure:17116: result: 4
    configure:17122: checking for char *
    configure:17143: gcc -c -O2    conftest.c >&5
    configure:17146: $? = 0
    configure:17149: test -s conftest.o
    configure:17152: $? = 0
    configure:17162: result: yes
    configure:17165: checking size of char *
    configure:17329: gcc -o conftest -O2     conftest.c  >&5
    configure:17332: $? = 0
    configure:17334: ./conftest
    configure:17337: $? = 0
    configure:17353: result: 4
    configure:17359: checking for char
    configure:17380: gcc -c -O2    conftest.c >&5
    configure:17383: $? = 0
    configure:17386: test -s conftest.o
    configure:17389: $? = 0
    configure:17399: result: yes
    configure:17402: checking size of char
    configure:17566: gcc -o conftest -O2     conftest.c  >&5
    configure:17569: $? = 0
    configure:17571: ./conftest
    configure:17574: $? = 0
    configure:17590: result: 1
    configure:17596: checking for dlopen in -ldl
    configure:17643: result: yes
    configure:17652: checking for shl_unload in -ldld
    configure:17679: gcc -o conftest -O2     conftest.c -ldld   >&5
    /usr/bin/ld: cannot find -ldld
    collect2: ld returned 1 exit status
    configure:17682: $? = 1
    configure: failed program was:
    #line 17660 "configure"
    #include "confdefs.h"
    
    /* Override any gcc2 internal prototype to avoid an error.  */
    #ifdef __cplusplus
    extern "C"
    #endif
    /* We use char because int might match the return type of a gcc2
       builtin and then its argument prototype would still apply.  */
    char shl_unload ();
    int
    main ()
    {
    shl_unload ();
      ;
      return 0;
    }
    configure:17699: result: no
    configure:17728: checking for X
    configure:17766: gcc -E  conftest.c
    configure:17772: $? = 0
    configure:17858: gcc -o conftest -O2     conftest.c -lXt  >&5
    configure:17861: $? = 0
    configure:17864: test -s conftest
    configure:17867: $? = 0
    configure:18011: result: libraries /usr/lib, headers .
    configure:18040: checking for IceConnectionNumber in -lICE
    configure:18067: gcc -o conftest -O2     -L/usr/lib conftest.c -lICE  -lresolv  >&5
    configure:18070: $? = 0
    configure:18073: test -s conftest
    configure:18076: $? = 0
    configure:18087: result: yes
    configure:18097: checking for libXext
    configure:18129: gcc -o conftest -O2     -L/usr/lib  conftest.c -lXext -lX11  -lresolv >&5
    configure:18132: $? = 0
    configure:18135: test -s conftest
    configure:18138: $? = 0
    configure:18154: result: yes
    configure:18167: checking for Xinerama
    configure:18234: result: no
    configure:18277: checking for pthread_create in -lpthread
    configure:18304: gcc -o conftest -O2     conftest.c -lpthread   >&5
    configure:18307: $? = 0
    configure:18310: test -s conftest
    configure:18313: $? = 0
    configure:18324: result: yes
    configure:18620: checking for extra includes
    configure:18647: result: no
    configure:18651: checking for extra libs
    configure:18678: result: no
    configure:18681: checking for libz
    configure:18712: gcc -o conftest -O2   -I.   -D_REENTRANT  conftest.c -L/usr/lib  -lz  -lresolv >&5
    configure:18715: $? = 0
    configure:18718: test -s conftest
    configure:18721: $? = 0
    configure:18742: result: -lz
    configure:18752: checking for libpng
    configure:18791: gcc -o conftest -O2   -I.   -D_REENTRANT  conftest.c  -L/usr/lib  -lpng -lz -lm -lX11  -lresolv >&5
    configure:18794: $? = 0
    configure:18797: test -s conftest
    configure:18800: $? = 0
    configure:18822: result: -lpng -lz -lm
    configure:18831: checking for libjpeg6b
    configure:18874: gcc -o conftest -O2   -I.   -D_REENTRANT  conftest.c -L/usr/lib  -ljpeg6b -lm >&5
    /usr/bin/ld: cannot find -ljpeg6b
    collect2: ld returned 1 exit status
    configure:18877: $? = 1
    configure: failed program was:
    #line 18848 "configure"
    #include "confdefs.h"
    /* Override any gcc2 internal prototype to avoid an error.  */
    struct jpeg_decompress_struct;
    typedef struct jpeg_decompress_struct * j_decompress_ptr;
    typedef int size_t;
    #ifdef __cplusplus
    extern "C" {
    #endif
        void jpeg_CreateDecompress(j_decompress_ptr cinfo,
                                        int version, size_t structsize);
    #ifdef __cplusplus
    }
    #endif
    /* We use char because int might match the return type of a gcc2
        builtin and then its argument prototype would still apply.  */
    
    int
    main ()
    {
    jpeg_CreateDecompress(0L, 0, 0);
      ;
      return 0;
    }
    configure:18902: result: no
    configure:18905: checking for libjpeg
    configure:18948: gcc -o conftest -O2   -I.   -D_REENTRANT  conftest.c -L/usr/lib  -ljpeg -lm >&5
    configure:18951: $? = 0
    configure:18954: test -s conftest
    configure:18957: $? = 0
    configure:18973: result: -ljpeg
    configure: 18992: /usr/include/jpeglib.h
    taking that
    configure:19145: checking for Qt
    configure: 19207: /usr/lib/qt3/include/qstyle.h
    configure: 19207: /usr/lib/qt3/qstyle.h
    configure: 19207: /usr/lib/qt/include/qstyle.h
    configure: 19207: /usr/lib/qt/qstyle.h
    configure: 19207: /usr/local/qt/include/qstyle.h
    configure: 19207: /usr/include/qt/qstyle.h
    configure: 19207: /usr/include/qstyle.h
    configure: 19207: /usr/X11R6/include/X11/qt/qstyle.h
    configure: 19207: /usr/X11R6/include/qt/qstyle.h
    configure: 19207: /usr/X11R6/include/qt2/qstyle.h
    configure: 19207: ./qstyle.h
    tried NO
    tried /usr/lib/qt3/lib
    tried /usr/lib/qt3
    tried /usr/lib/qt/lib
    tried /usr/lib/qt
    tried /usr/X11R6/lib
    configure:19312: rm -rf SunWS_cache; g++ -o conftest -O2 -fno-exceptions -fno-check-new -INO -I.  -DQT_THREAD_SUPPORT  -D_REENTRANT  -L/usr/lib -L/usr/lib   conftest.cc  -lqt-mt -lpng -lz -lm -ljpeg -ldl  -lXext -lX11 -lSM -lICE  -lresolv -lpthread 1>&5
    conftest.cc:2:21: error: qglobal.h: No such file or directory
    conftest.cc:3:26: error: qapplication.h: No such file or directory
    conftest.cc:4:21: error: qcursor.h: No such file or directory
    conftest.cc:5:27: error: qstylefactory.h: No such file or directory
    conftest.cc:6:34: error: private/qucomextra_p.h: No such file or directory
    conftest.cc:8:2: error: #error 1
    conftest.cc: In function 'int main()':
    conftest.cc:12: error: 'QStyleFactory' was not declared in this scope
    conftest.cc:12: error: expected `;' before '::' token
    conftest.cc:13: error: 'QCursor' was not declared in this scope
    conftest.cc:13: error: expected `;' before 'c'
    configure:19315: $? = 1
    configure: failed program was:
    #include "confdefs.h"
    #include <qglobal.h>
    #include <qapplication.h>
    #include <qcursor.h>
    #include <qstylefactory.h>
    #include <private/qucomextra_p.h>
    #if ! (QT_VERSION >= 303)
    #error 1
    #endif
    
    int main() {
        (void)QStyleFactory::create(QString::null);
        QCursor c(Qt::WhatsThisCursor);
        return 0;
    }
    configure:19354: error: Qt (>= Qt 3.0.3) (headers and libraries) not found. Please check your installation!
    For more details about this problem, look at the end of config.log.
    
    ## ----------------- ##
    ## Cache variables.  ##
    ## ----------------- ##
    
    ac_cv_build='i686-pc-linux-gnu'
    ac_cv_build_alias='i686-pc-linux-gnu'
    ac_cv_c_compiler_gnu='yes'
    ac_cv_cxx_compiler_gnu='yes'
    ac_cv_env_CC_set=''
    ac_cv_env_CC_value=''
    ac_cv_env_CFLAGS_set=''
    ac_cv_env_CFLAGS_value=''
    ac_cv_env_CPPFLAGS_set=''
    ac_cv_env_CPPFLAGS_value=''
    ac_cv_env_CPP_set=''
    ac_cv_env_CPP_value=''
    ac_cv_env_CXXCPP_set=''
    ac_cv_env_CXXCPP_value=''
    ac_cv_env_CXXFLAGS_set=''
    ac_cv_env_CXXFLAGS_value=''
    ac_cv_env_CXX_set=''
    ac_cv_env_CXX_value=''
    ac_cv_env_LDFLAGS_set=''
    ac_cv_env_LDFLAGS_value=''
    ac_cv_env_build_alias_set=''
    ac_cv_env_build_alias_value=''
    ac_cv_env_host_alias_set=''
    ac_cv_env_host_alias_value=''
    ac_cv_env_target_alias_set=''
    ac_cv_env_target_alias_value=''
    ac_cv_func_connect='yes'
    ac_cv_func_dlopen='no'
    ac_cv_func_inet_ntoa='yes'
    ac_cv_func_remove='yes'
    ac_cv_func_res_init='no'
    ac_cv_func_shl_load='no'
    ac_cv_func_shmat='yes'
    ac_cv_have_dlfcn='yes'
    ac_cv_have_qt='have_qt=no'
    ac_cv_have_xinerama='no'
    ac_cv_header_dlfcn_h='yes'
    ac_cv_header_inttypes_h='yes'
    ac_cv_header_memory_h='yes'
    ac_cv_header_stdc='yes'
    ac_cv_header_stdint_h='yes'
    ac_cv_header_stdlib_h='yes'
    ac_cv_header_string_h='yes'
    ac_cv_header_strings_h='yes'
    ac_cv_header_sys_stat_h='yes'
    ac_cv_header_sys_types_h='yes'
    ac_cv_header_unistd_h='yes'
    ac_cv_host='i686-pc-linux-gnu'
    ac_cv_host_alias='i686-pc-linux-gnu'
    ac_cv_lib_ICE_IceConnectionNumber='yes'
    ac_cv_lib_compat_main='no'
    ac_cv_lib_crypt_crypt='yes'
    ac_cv_lib_dl_dlopen='yes'
    ac_cv_lib_dld_shl_load='no'
    ac_cv_lib_dld_shl_unload='no'
    ac_cv_lib_dnet_dnet_ntoa='no'
    ac_cv_lib_dnet_stub_dnet_ntoa='no'
    ac_cv_lib_jpeg_6b='no'
    ac_cv_lib_jpeg_normal='-ljpeg'
    ac_cv_lib_png='-lpng -lz -lm'
    ac_cv_lib_pthread_pthread_create='yes'
    ac_cv_lib_ucb_killpg='no'
    ac_cv_lib_util_main='yes'
    ac_cv_lib_z='-lz'
    ac_cv_objext='o'
    ac_cv_path_GMSGFMT='/usr/bin/msgfmt'
    ac_cv_path_MSGFMT='/usr/bin/msgfmt'
    ac_cv_path_XGETTEXT='/usr/bin/xgettext'
    ac_cv_path_install='/usr/bin/install -c'
    ac_cv_prog_AWK='mawk'
    ac_cv_prog_CPP='gcc -E'
    ac_cv_prog_CXXCPP='g++ -E'
    ac_cv_prog_ac_ct_CC='gcc'
    ac_cv_prog_ac_ct_CXX='g++'
    ac_cv_prog_ac_ct_RANLIB='ranlib'
    ac_cv_prog_ac_ct_STRIP='strip'
    ac_cv_prog_cc_g='yes'
    ac_cv_prog_cxx_g='yes'
    ac_cv_prog_make_make_set='yes'
    ac_cv_sizeof_char='1'
    ac_cv_sizeof_char_p='4'
    ac_cv_sizeof_int='4'
    ac_cv_sizeof_long='4'
    ac_cv_socklen_t='socklen_t'
    ac_cv_target='i686-pc-linux-gnu'
    ac_cv_target_alias='i686-pc-linux-gnu'
    ac_cv_type_char='yes'
    ac_cv_type_char_p='yes'
    ac_cv_type_int='yes'
    ac_cv_type_long='yes'
    am_cv_CC_dependencies_compiler_type='gcc3'
    am_cv_CXX_dependencies_compiler_type='gcc3'
    kde_cv_have_libXext='yes'
    kde_cv_have_x='have_x=yes          kde_x_includes=. kde_x_libraries=/usr/lib'
    kde_cv_prog_cxx_fexceptions='yes'
    kde_cv_prog_cxx_fno_check_new='yes'
    kde_cv_prog_cxx_fno_exceptions='yes'
    kde_cv_prog_cxx_frepo='yes'
    lt_cv_deplibs_check_method='pass_all'
    lt_cv_dlopen='dlopen'
    lt_cv_dlopen_libs='-ldl'
    lt_cv_dlopen_self='yes'
    lt_cv_dlopen_self_static='yes'
    lt_cv_file_magic_cmd='$MAGIC_CMD'
    lt_cv_file_magic_test_file='/lib/libc.so.6 /lib/libc-2.6.1.so'
    lt_cv_ld_reload_flag='-r'
    lt_cv_objdir='.libs'
    lt_cv_path_LD='/usr/bin/ld'
    lt_cv_path_NM='/usr/bin/nm -B'
    lt_cv_path_SED='/bin/sed'
    lt_cv_prog_compiler_c_o='yes'
    lt_cv_prog_compiler_c_o_CXX='yes'
    lt_cv_prog_compiler_c_o_GCJ='no'
    lt_cv_prog_compiler_rtti_exceptions='no'
    lt_cv_prog_gnu_ld='yes'
    lt_cv_sys_global_symbol_pipe='sed -n -e '"'"'s/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'"'"
    lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '"'"'s/^: \([^ ]*\) $/  {\"\1\", (lt_ptr) 0},/p'"'"' -e '"'"'s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr) \&\2},/p'"'"
    lt_cv_sys_global_symbol_to_cdecl='sed -n -e '"'"'s/^. .* \(.*\)$/extern int \1;/p'"'"
    lt_cv_sys_max_cmd_len='32768'
    lt_lt_cv_prog_compiler_c_o='"yes"'
    lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
    lt_lt_cv_prog_compiler_c_o_GCJ='"no"'
    lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '"'"'s/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"'"'"'
    lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '"'"'s/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p'"'"' -e '"'"'s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"'"'"'
    lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '"'"'s/^. .* \\(.*\\)\$/extern int \\1;/p'"'"'"'
    
    ## ------------ ##
    ## confdefs.h.  ##
    ## ------------ ##
    
    #define PACKAGE "rars"
    #define VERSION "0.90"
    #ifdef __cplusplus
    #include <stdlib.h>
    #endif
    #define HAVE_TEMPLATE_REPOSITORY 1
    #define HAVE_DLFCN_H 1
    #define STDC_HEADERS 1
    #define HAVE_SYS_TYPES_H 1
    #define HAVE_SYS_STAT_H 1
    #define HAVE_STDLIB_H 1
    #define HAVE_STRING_H 1
    #define HAVE_MEMORY_H 1
    #define HAVE_STRINGS_H 1
    #define HAVE_INTTYPES_H 1
    #define HAVE_STDINT_H 1
    #define HAVE_UNISTD_H 1
    #define HAVE_CRYPT 1
    #define ksize_t socklen_t
    #define HAVE_RES_INIT 1
    #define SIZEOF_INT 4
    #define SIZEOF_LONG 4
    #define SIZEOF_CHAR_P 4
    #define SIZEOF_CHAR 1
    #define HAVE_LIBZ 1
    #define HAVE_LIBPNG 1
    #define HAVE_LIBJPEG 1
    #define HAVE_LIBPTHREAD 1
    
    
    configure: exit 1
    
    viele grüße und danke schonmal,

    kimi
     
  5. #4 bitmuncher, 11.06.2008
    bitmuncher

    bitmuncher Der Stillgelegte

    Dabei seit:
    08.05.2007
    Beiträge:
    3.171
    Zustimmungen:
    0
    Dein Problem ist einfach, dass du kein dev-Paket von QT3 installiert hast.

    Code:
    sudo apt-get install libqt3-mt-dev
     
  6. kimi

    kimi blub

    Dabei seit:
    20.12.2006
    Beiträge:
    425
    Zustimmungen:
    0
    Ort:
    Tuttlingen
    @ bitmuncher:
    sorry, ich hatte vergessen zu erwähnen, dass dieses paket bereits installiert ist, es geht bei meiner liste um die auf ubuntuusers.de aufgelisteten pakete.

    aber wenn es in der INSTALL heißt

    dann muss es doch zumindest die möglichkeit geben, genau dieses problem zu beheben? mein problem ist vA wo ich das
    Code:
    > QTDIR=/usr/lib/qt2
    "place"n soll? soll ich das dem configure oder ähnlichem beibringen? Wiegesagt blicke ich da nicht so ganz durch...

    grüße

    kimi
     
  7. #6 bitmuncher, 11.06.2008
    bitmuncher

    bitmuncher Der Stillgelegte

    Dabei seit:
    08.05.2007
    Beiträge:
    3.171
    Zustimmungen:
    0
    QTDIR wird als Umgebungsvariable gesetzt. Einfach auf der Konsole, auf der du kompilierst ein 'export QTDIR=/ordner/zu/den/qtlibs' machen.
     
  8. kimi

    kimi blub

    Dabei seit:
    20.12.2006
    Beiträge:
    425
    Zustimmungen:
    0
    Ort:
    Tuttlingen
    einfach vor ich das ./configure mache das eintippen? oder in die bashrc einfügen?

    und den pfad mit whereis rausfinden is kein problem, aber es sind ja verschiedene pakete, die natürlich alle ihren eigenen pfad haben. oder gibt es einen zentralen ordner, in dem alle qtlibs gespeichert sind?

    viele grüße

    kimi
     
  9. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  10. #8 bitmuncher, 12.06.2008
    bitmuncher

    bitmuncher Der Stillgelegte

    Dabei seit:
    08.05.2007
    Beiträge:
    3.171
    Zustimmungen:
    0
    Da du es nur temporär brauchst, reicht es das export vor dem configure auszuführen. In die .bashrc müssen nur Umgebungsvariablen, die dauerhaft benötigt werden. Im Normal sollte bei Ubuntu die QTDIR /usr gültig sein, das aber eigentlich automatisch gefunden werden sollte, weswegen mich das ein wenig verwundert. Was gibt 'dpkg -l | grep qt3' bei dir aus?
     
  11. kimi

    kimi blub

    Dabei seit:
    20.12.2006
    Beiträge:
    425
    Zustimmungen:
    0
    Ort:
    Tuttlingen
    @bitmuncher:
    dpkg -l grep qt3:
    Code:
    seba@Sebastian:~$ dpkg -l | grep qt3
    ii  libavahi-qt3-1                             0.6.20-2ubuntu3.3                    Avahi Qt3 integration library
    ii  libqt3-headers                             3:3.3.8really3.3.7-0ubuntu11.1       Qt3 header files
    ii  libqt3-mt                                  3:3.3.8really3.3.7-0ubuntu11.1       Qt GUI Library (Threaded runtime version), V
    ii  libqt3-mt-dev                              3:3.3.8really3.3.7-0ubuntu11.1       Qt development files (Threaded)
    ii  libqt4-qt3support                          4.3.2-0ubuntu3.2                     Qt 3 compatibility library for Qt 4
    ii  python-qt3                                 3.17.3-2ubuntu3                      Qt3 bindings for Python
    ii  qt3-dev-tools                              3:3.3.8really3.3.7-0ubuntu11.1       Qt3 development tools
    
    grüße

    kimi

    ps: ich habe export QTDIR=/usr/ vor dem configure ausgeführt, und es kam die gleiche meldung. oder war ich nur zu dumm und du meintest ein unterverzeichnis von /usr?
     
Thema:

rars

Die Seite wird geladen...

rars - Ähnliche Themen

  1. Suse verarsch mich :(

    Suse verarsch mich :(: Hi ich habe ein fettes Problem: Ich habe mir vor kurzem Suse 9.0 draufgemacht, nach ein paar Wochen hab ich Fedora Core 1.0 zum testen...