Probleme bei file sharing mit Samba

Dieses Thema im Forum "Internet, lokale Netzwerke und Wireless Lan" wurde erstellt von cremi, 12.02.2007.

  1. #1 cremi, 12.02.2007
    Zuletzt bearbeitet: 12.02.2007
    cremi

    cremi Dude

    Dabei seit:
    15.02.2004
    Beiträge:
    329
    Zustimmungen:
    0
    Ort:
    AUT/Ktn
    Hallo,

    versuche gerade meinen PC als File Server einzurichten:

    distri: kubunutu 6.10

    Da ich mit Samba nicht viel Erfahrung habe, hab ich das einfach über KDE versucht (System Settings -> Sharing). Da hab ich die gewünschten Ordner ausgewählt.

    Wenn ich dann auf einem anderen PC den "Server PC" Auswähle, wird keines der freigegebenen Verzeichnisse angezeigt. Da muss irgendwo was falsch konfiguriert sein. Drucken über Samba funktioniert (der Drucker hängt ebenfalls an dem Rechner, an den ich als Fileserver verwenden möchte)

    testparm liefert folgenden Fehler:
    Code:
    laurin@rincewind:/etc/samba$ sudo testparm
    Load smb config files from /etc/samba/smb.conf
    params.c:Section() - Badly formed line in configuration file: ]
    params.c:pm_process() - Failed.  Error returned from params.c:parse().
    Error loading services.
    laurin@rincewind:/etc/samba$ 
    
    Meine smb.conf
    Code:
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which
    # are not shown in this example
    #
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentary and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic
    # errors.
    #
    
    #======================= Global Settings =======================
    
    [global]
    
    ## Browsing/Identification ###
    
    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = MSHOME
    
    
    ####### Authentication #######
    
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
    # in the samba-doc package for details.
    security = user
    
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
    encrypt passwords = true
    
    # server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    ;   wins support = no
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no
    
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
    
    #### Networking ####
    
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
    
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = true
    
    
    
    #### Debugging/Accounting ####
    
    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m
    
    # Put a capping on the size of the log files (in Kb).
    max log size = 1000
    
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    ;   syslog only = no
    
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0
    
    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d
    username map = /etc/samba/smbusers
    
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.
    passdb backend = tdbsam
    
    obey pam restrictions = yes
    
    ;   guest account = nobody
    invalid users = root
    
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    ;   unix password sync = no
    
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
    
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    ;   pam password change = no
    
    ########## Domains ###########
    
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    ;   logon path = \\%N\%U\profile
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    ;   logon home = \\%N\%U
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
    
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
    
    ########## Printing ##########
    
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ;   load printers = yes
    
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/printcap
    
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
    printing = cups
    printcap name = cups
    
    # When using [print$], root is implicitly a 'printer admin', but you can
    # also give this right to other users to add drivers and set printer
    # properties
    ;   printer admin = @lpadmin
    
    
    ############ Misc ############
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
    
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
    socket options = TCP_NODELAY
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ;   write list = root, @ntadmin
    
    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   writable = no
    ;   locking = no
    ;   path = /cdrom
    ;   public = yes
    
    # The next two parameters show how to auto-mount a CD-ROM when the
    #	cdrom share is accesed. For this to work /etc/fstab must contain
    #	an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #	is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom
    
    []
    comment = All Printers
    path = /tmp
    create mask = 0700
    printable = Yes
    browseable = No
    guest ok = Yes
    write list = proxya
    
    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    # Uncomment to allow remote administration of Windows print drivers.
    # Replace 'ntadmin' with the name of the group your admin users are
    # members of.
    ;   write list = root, @ntadmin
    
    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   writable = no
    ;   locking = no
    ;   path = /cdrom
    ;   public = yes
    
    # The next two parameters show how to auto-mount a CD-ROM when the
    #	cdrom share is accesed. For this to work /etc/fstab must contain
    #	an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #	is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom
    
    []
    comment = All Printers
    path = /tmp
    create mask = 0700
    printable = Yes
    browseable = No
    guest ok = Yes
    write list = proxya
    
    [SBML]
    path = /home/laurin/sbml/
    guest ok = yes
    read only = no
    
    [LAURIN]
    path = /home/laurin
    guest ok = yes
    case sensitive = no
    msdfs proxy = no
    read only = no
    hab jetzt das hier gefunden, aber ich muß zuerst den Fehler in der smb.conf beseitigen - hab aber keine idee warum der auftritt.

    Vielleicht kann mir ja jemand helfen, bzw. ein gutes HowTo für Samba empfehlen.

    EDIT: Hab grad gesehen, daß ich im falschen Forum bin - könnte den bitte jemand nach Samba verschieben
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
Thema:

Probleme bei file sharing mit Samba

Die Seite wird geladen...

Probleme bei file sharing mit Samba - Ähnliche Themen

  1. Probleme mit file-roller

    Probleme mit file-roller: Moin! Ich wollte heute eine rar Datei entpacken. rar unrar nonfree und unrar hab ich installiert. wenn ich die Datei entpacken möchte, kommt ne...
  2. Probleme mit Server gespeicherten Profilen

    Probleme mit Server gespeicherten Profilen: Hi Leute, versuche seit geraumer Zeit einen Samba Server auf die Beine zu stellen. leider läuft dieser nie so wie ich mir das Vorstelle. Muß...
  3. SMB Probleme mit geöffnetem File

    SMB Probleme mit geöffnetem File: Hallo Zusammen Melde mich mal wieder, weil ein gröberes Problem mit der Datei Transfer Beziehung zwichen ein SUSE Linux 9 Enterprise Server und...
  4. Probleme mit geöffnetem File

    Probleme mit geöffnetem File: Hallo Zusammen Melde mich mal wieder, weil ein gröberes Problem mit der Datei Transfer Beziehung zwichen ein SUSE Linux 9 Enterprise Server und...
  5. Probleme beim Synchronisieren der Profiles

    Probleme beim Synchronisieren der Profiles: Hallo Leute! Folgende Situation: Ich benutze 2 Clients (WinXP Pro SP 2), und einen Samba Server (3.0.14a-debian). Ich benutze eigentlich immer...