Xorg Aüflösung ändern

R

Rabi

Grünschnabel
Hi, bin neu im Board und hab da gleich mal ein paar fragen.

Ich hab ein Älteres Notebook Dell C600, und hab bis vor kurzem FressBSD 4.x drauf gehabt. Nur nach einem kleinen Platten crash. Muß ich jetzt alles neu installieren. Und hab mir auch gleich die neusten images geholt.

Nur kann ich bei Xorg die auflösung nicht ändern egal was ich mache. Mehr wie 640x480 sind nicht drin X(

Log datein kann ich im moment grade nich posten :)

Unter Xfree lief alles ohne probleme.
 
normalerweise stellst du die möglichen modes in der xorg.conf ein und im X kannst du dann mittels Ctrl+Alt++ oder Ctrl+Alt+- zwischen den unterschiedlichen Modi hin- und herschalten.

Die betreffende Sektion in der xorg.conf ist Subsection "Display". Bei deiner gewählten Farbtiefe schreibst du die für deinen Monitor möglichen Modi hinein.

MfG,
Graf_Ithaka
 
Die Auflösung kannst du in der /etx/X11/xorg.conf ändern, es wäre aber besser wenn du für deine Grafikkarte Treber installiert dann wird diese automatisch umgestellt.
 
Code: 
sudo dpkg-reconfigure xserver-xorg
Da kriegste ein halbgrafisches UI, wenn du das mit dem Textfile nich blicken solltest.
€ Sry wenn das mit BSD nich funzt; is für Linux gedacht.
 
Ja die Xorg.conf hab ich schon mehr mals umgestellt. Hab ihm Forum schon fleissig gesucht. Leider gibt es fuer meine Karte keine Treiber bzw hab ich keine gefunden ist eine ATI M2/3

Code: 
X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: FreeBSD 6.2 i386 [ELF] 
Current Operating System: FreeBSD rabi.localhost 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
Build Date: 16 October 2006
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul  7 11:55:42 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
	Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.8
	X.Org XInput driver : 0.5
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 104c,ac51 card fffc,ffff rev 00 class 06,07,00 hdr 82
(II) PCI: 00:03:1: chip 104c,ac51 card fffc,ffff rev 00 class 06,07,00 hdr 82
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 125d,1998 card 1028,00b1 rev 10 class 04,01,00 hdr 00
(II) PCI: 00:0d:0: chip 10b7,9200 card 1028,00a7 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c46 card 1028,00b1 rev 02 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000e000 - 0x0000e0ff (0x100) IX[B]
	[1] -1	0	0x0000e400 - 0x0000e4ff (0x100) IX[B]
	[2] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[3] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xfd000000 - 0xfeffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (0:3:0), (0,4,4), BCTRL: 0x0740 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (0:3:1), (0,5,5), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xf8000000/26, 0xfdffc000/14, I/O @ 0xec00/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to 0xf3ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xf3ffdc00 - 0xf3ffdfff (0x400) MX[B]E
	[1] -1	0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
	[2] -1	0	0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
	[3] -1	0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[4] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[5] -1	0	0x0000dc00 - 0x0000dcff (0x100) IX[B]E
	[6] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
	[7] -1	0	0x0000dce0 - 0x0000dcff (0x20) IX[B]E
	[8] -1	0	0x00000860 - 0x0000087f (0x20) IX[B]E
	[9] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) PCI I/O resource overlap reduced 0x0000dc00 from 0x0000dcff to 0x0000dc7f
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf3ffdc00 - 0xf3ffdfff (0x400) MX[B]E
	[1] -1	0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
	[2] -1	0	0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
	[3] -1	0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[4] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[5] -1	0	0x0000dc00 - 0x0000dc7f (0x80) IX[B]E
	[6] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
	[7] -1	0	0x0000dce0 - 0x0000dcff (0x20) IX[B]E
	[8] -1	0	0x00000860 - 0x0000087f (0x20) IX[B]E
	[9] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf3ffdc00 - 0xf3ffdfff (0x400) MX[B]E
	[6] -1	0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
	[7] -1	0	0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
	[8] -1	0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[9] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000dc00 - 0x0000dc7f (0x80) IX[B]E
	[13] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
	[14] -1	0	0x0000dce0 - 0x0000dcff (0x20) IX[B]E
	[15] -1	0	0x00000860 - 0x0000087f (0x20) IX[B]E
	[16] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.9.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 6.5.7
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireGL D1100 (RV370) 5B65 (PCIE),
	ATI Radeon Mobility M300 (M22) 5460 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
	ATI FireGL V7100 (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE), ATI Radeon FireGL (R480) GL 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI:  Candidate "Device" section "Card0".
(--) Chipset ATI Rage 128 Mobility M3 LF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf3ffdc00 - 0xf3ffdfff (0x400) MX[B]E
	[6] -1	0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
	[7] -1	0	0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
	[8] -1	0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[9] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000dc00 - 0x0000dc7f (0x80) IX[B]E
	[13] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
	[14] -1	0	0x0000dce0 - 0x0000dcff (0x20) IX[B]E
	[15] -1	0	0x00000860 - 0x0000087f (0x20) IX[B]E
	[16] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 4.0.4
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.8
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xf3ffdc00 - 0xf3ffdfff (0x400) MX[B]E
	[6] -1	0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
	[7] -1	0	0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
	[8] -1	0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[9] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[10] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[11] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[12] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x0000dc00 - 0x0000dc7f (0x80) IX[B]E
	[16] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
	[17] -1	0	0x0000dce0 - 0x0000dcff (0x20) IX[B]E
	[18] -1	0	0x00000860 - 0x0000087f (0x20) IX[B]E
	[19] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
	[20] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[21] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 1 card 0 func 0
(II) R128(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 16/16
(==) R128(0): Depth 16, (==) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) R128(0): initializing int10
(==) R128(0): Write-combining range (0xa0000,0x20000) was already clear
(==) R128(0): Write-combining range (0xc0000,0x40000) was already clear
(II) R128(0): Primary V_BIOS segment is: 0xc000
(==) R128(0): Write-combining range (0x0,0x1000) was already clear
(--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)
(--) R128(0): Linear framebuffer at 0xf8000000
(--) R128(0): MMIO registers at 0xfdffc000
(==) R128(0): Write-combining range (0xfdffc000,0x4000) was already clear
(--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Primary Display == Type 2
(II) R128(0): Panel size: 1024x768
(II) R128(0): Panel ID: Hitachi TX36D84VC1CAA   
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12000 max=27000; xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 8192 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M3
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M3  
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.so
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Monitor0: Using default hsync range of 28.00-33.00 kHz
(II) R128(0): Monitor0: Using default vrefresh range of 43.00-72.00 Hz
(II) R128(0): Clock range:  12.00 to 270.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (no mode of this name)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (no mode of this name)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "832x624" (no mode of this name)
(II) R128(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x768" (no mode of this name)
(II) R128(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1024" (no mode of this name)
(II) R128(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (no mode of this name)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 25.2 MHz] for FP to: 640x480 [pclk 65.0 MHz]
(--) R128(0): Virtual size is 640x480 (pitch 640)
(**) R128(0): *Default mode "640x480": 65.0 MHz (scaled from 25.2 MHz), 31.5 kHz, 60.0 Hz
(II) R128(0): Modeline "640x480"   65.00  640 664 681 960  480 482 488 518 -hsync -vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) R128(0): Page flipping disabled
(==) R128(0): Write-combining range (0x0,0x1000) was already clear
(!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xfdffc000 - 0xfdffffff (0x4000) MS[B]
	[1] 0	0	0xf8000000 - 0xfbffffff (0x4000000) MS[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xf3ffdc00 - 0xf3ffdfff (0x400) MX[B]E
	[8] -1	0	0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]E
	[9] -1	0	0xf4000000 - 0xf3ffffff (0x0) MX[B]EO
	[10] -1	0	0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
	[11] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[15] 0	0	0x0000ec00 - 0x0000ecff (0x100) IS[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000dc00 - 0x0000dc7f (0x80) IX[B]E
	[19] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]E
	[20] -1	0	0x0000dce0 - 0x0000dcff (0x20) IX[B]E
	[21] -1	0	0x00000860 - 0x0000087f (0x20) IX[B]E
	[22] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
	[23] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[24] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) R128(0): Write-combining range (0xfdffc000,0x4000) was already clear
(==) R128(0): Write-combining range (0xf8000000,0x800000)
(==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) R128(0): [drm] DRM interface version 1.2
(II) R128(0): [drm] created "r128" driver at busid "pci:0000:01:00.0"
(II) R128(0): [drm] added 8192 byte SAREA at 0xc2a54000
(II) R128(0): [drm] mapped SAREA 0xc2a54000 to 0x286fa000
(II) R128(0): [drm] framebuffer handle = 0xf8000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): [agp] Mode 0x1f000201 [AGP 0x0000/0x0000; Card 0x1002/0x4c46]
(II) R128(0): [agp] 8192 kB allocated with handle 0xc29fc1c0
(II) R128(0): [agp] ring handle = 0xf4000000
(II) R128(0): [agp] Ring mapped at 0x28fe8000
(II) R128(0): [agp] ring read ptr handle = 0xf4101000
(II) R128(0): [agp] Ring read ptr mapped at 0x286fc000
(II) R128(0): [agp] vertex/indirect buffers handle = 0xf4102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x290e9000
(II) R128(0): [agp] AGP texture map handle = 0xf4302000
(II) R128(0): [agp] AGP Texture map mapped at 0x292e9000
(II) R128(0): [drm] register handle = 0xfdffc000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (640,2457)
(II) R128(0): Reserved area from (0,480) to (640,482)
(II) R128(0): Largest offscreen area available: 640 x 1975
(II) R128(0): Reserved back buffer from (0,482) to (640,962)
(II) R128(0): Reserved depth buffer from (0,962) to (640,1443)
(II) R128(0): Reserved depth span from (0,1442) offset 0x1c2a00
(II) R128(0): Reserved 5120 kb for textures at offset 0x2ffd00
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		19 128x128 slots
		4 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 2886)
(II) R128(0): Largest offscreen area available: 640 x 1010
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 11
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/sysmouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse

Hier mal meine Log

Code: 
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "ForcePCIMode"       	# [<bool>]
        #Option     "CCEPIOMode"         	# [<bool>]
        #Option     "CCENoSecurity"      	# [<bool>]
        #Option     "CCEusecTimeout"     	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPSize"            	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "Display"            	# <str>
        #Option     "PanelWidth"         	# <i>
        #Option     "PanelHeight"        	# <i>
        #Option     "ProgramFPRegs"      	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "ShowCache"          	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI Technologies Inc"
	BoardName   "Rage Mobility M3 AGP 2x"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
		SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

und meine Aktuelle/Neue Xorg.conf
 
Zuletzt bearbeitet:
Da ich jetzt keinen extra Thread aufmachen möchte.

Ich hab mir jetzt gedacht OK, versuch ich mal die neue Version von Xorg. Und wollte jetzt pkg die neuste installieren. Trotzdem anpassund der Ftp server sagt pkg immer er kann die Datein nicht finden. Jemand ne idee was ich falsch mache :hilfe2:
 
Ohne genauere Informationen wird dir da keiner helfen können.
Schreib mal was du genau in die Konsole eingibst und was die Fehlermeldung ist.
 
blue-dev schrieb:
Ohne genauere Informationen wird dir da keiner helfen können.
Schreib mal was du genau in die Konsole eingibst und was die Fehlermeldung ist.
Zum Vergrößern anklicken....

Sry

Naja, ich hab mir die mühe gemacht. Alles nochmal nach Handbuch zu installieren. Da ich gedacht habe, das ich vielleicht was übersehen habe.

Und dann wollte ich Xorg so wie es im Handbuch steht installieren.


pkg_add -r Xorg
Error : FTP Unable to get ftp://ftp.freebsd.org/pub/FreebSD/*/*/Xorg.tbz usw

So dann habe ich mir gedacht wenn ich das schon so mache kann ich auch gleich die Neueste version von Xorg nehmen da auf dem Sever nur die 6.9 liegt. Und hab den FTP dann eingetragen. Soweit ich mich noch erinnern konnte wie das wahr.

Code: 
/etc/csh.cshrc 
setenv PACKAGESITE ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/*/Latest/

setenv PKG_SITES ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/*/

/etc/profile
 
PACKAGESITE=ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/*/Latest/; export PACKAGESITE

PKG_SITES=ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/*/; export PKG_SITES

Bloß sagt er immer noch das der FTP nicht da ist. I-Net verbindung ist in ordnung.
 
Zuletzt bearbeitet:
Anmelden, um zu antworten.

Ähnliche Themen

Displayport + externer Monitor zeigt bei startx nichts erst bei DVI
Displayport + externer Monitor zeigt bei startx nichts erst bei DVI: Hallo ich habe auf meinem ThinkPad T420 i5 Intel HD3000 Grafikkarte onboard 16 GB RAM OpenBSD snapshot amd64 ist von märz installiert wenn nur...

X zeigt Elemente an, als ob sie zu einer anderen Auflösung gehören würden
X zeigt Elemente an, als ob sie zu einer anderen Auflösung gehören würden: Hi, immer, wenn ich X neu starte unter Debian 5.0, dann wird zwar die von mir gespeicherte Auflösung des Bildschirms wiederhergestellt (hier: 1280x1024)...

Xinerama und ATI Treiber?
Xinerama und ATI Treiber?: Hi, ich kämpfe nun schon seit Tagen damit ATI treiber + beide Monitor richtig einzustellen. Mein ziel ist es die ATI Treiber benutzen zu können sowie...

Kmenu ist weg^^
Kmenu ist weg^^: naja was soll ich sagen ^^ mein Linux akzeptierte keinerlei ALT-GR kombies ^^ das Ganze bei X11 und KDE da hab ich ganz einfach apt-get -remove xmodmap...

Server-Monitoring mit RRDTool
Server-Monitoring mit RRDTool: Da ich keinen besseren Platz gefunden habe, schreibe ich das folgende also einfach mal hier rein. Performance-Monitoring - Eine kleine Howto-Geschichte...

Neueste Themen

Zurück
Oben