ntfs-3g aktivieren

Moin mali

Beinhart@noname:~> ls -al /dev/hd*
brw-r----- 1 root disk 3, 0 15. Mär 2007 /dev/hda
brw-r----- 1 root disk 3, 1 15. Mär 2007 /dev/hda1
brw-r----- 1 root disk 3, 2 15. Mär 2007 /dev/hda2
brw-r----- 1 root disk 3, 3 15. Mär 2007 /dev/hda3
brw-rw----+ 1 root disk 22, 0 15. Mär 2007 /dev/hdc
Beinhart@noname:~>

Beinhart@noname:~> ls -al /dev/sd*
brw-r----- 1 root disk 8, 16 15. Mär 2007 /dev/sdb
brw-r----- 1 root disk 8, 32 15. Mär 2007 /dev/sdc
brw-r----- 1 root disk 8, 48 15. Mär 2007 /dev/sdd
brw-r----- 1 root disk 8, 64 15. Mär 2007 /dev/sde
brw-r----- 1 root disk 8, 80 15. Mär 20:18 /dev/sdf
brw-r----- 1 root disk 8, 81 15. Mär 20:18 /dev/sdf1
brw-r----- 1 root disk 8, 85 15. Mär 20:18 /dev/sdf5
brw-r----- 1 root disk 8, 86 15. Mär 20:18 /dev/sdf6
brw-r----- 1 root disk 8, 87 15. Mär 20:18 /dev/sdf7
brw-r----- 1 root disk 8, 88 15. Mär 20:18 /dev/sdf8
brw-r----- 1 root disk 8, 89 15. Mär 20:18 /dev/sdf9
Beinhart@noname:~>

...das war ja klar, der sogenannte Vorführeffekt zu mindest in der Konsole!

In dem Ordner media sind die Laufwerke auch zu sehen nur vollkommen LEER!

Das heißt, das ich den Rechner jetzt wieder neustarten kann und das USB-Kabel rausziehen muss. Wenn ich mich jetzt nur abmelde und als root anmelde sind die Laufwerke auch leer!

oijoijoijoijoijoijoijoij8o
 
also, so wie es aussieht, ist deine USB-HD "sdf1 - 9" ausser der "sdf5".

probier mal folgendes aus:
mkdir /mnt/test_hd
mount /dev/sdf1 /mnt/test_hd ODER
mount -t -o force ntfs-3g /dev/sdf1 /mnt/test_hd

Der MEDIA - Ordner ist ne andere Sache. Probier es erstmal so wie oben (sollte klappen), also "zufuss" ohne den automount.
 
Moin mali

...also die USB-HD sind sde5 - sde9, aber irgendwas stimmt mit dem Befehl noch nicht.
Festpl_USB habe ich vorher angelegt und da wollte ich jetzt die "sde's" reinmounten.

noname:~ # mount -t -o force ntfs-3g /dev/sde5 /Festpl_USB
Usage: mount -V : print version
mount -h : print this help
mount : list mounted filesystems
mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
mount -a [-t|-O] ... : mount all stuff from /etc/fstab
mount device : mount device at the known place
mount directory : mount known device here
mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
mount --bind olddir newdir
or move a subtree:
mount --move olddir newdir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .

Hab das auch schon mit"--bind" probiert, da wird aber immer nur 1 Laufwerk eingebunden.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.

"rw" und "ntfs-3g" option in der /etc/fstab eintragen
Moin mali,

könntest du das mal genauer erklären, wie man das macht...?
 
Zuletzt bearbeitet:
oname:~ # mount -t -o force ntfs-3g /dev/sde5 /Festpl_USB

ups, versuch mal: mount -t ntfs-3g -o force /dev/sde5 /Festpl_USB

fstab

z.B. /dev/sde5 /Festpl_USB ntfs-3g noatime,rw 0 0
 
Zuletzt bearbeitet:
Moin mali

noname:~ # mount -t ntfs-3g -o force /dev/sda5 /Festpl_USB
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda5': Operation not supported
Mount is denied because NTFS logfile is unclean. Choose one action:
Boot Windows and shutdown it cleanly, or if you have a removable
device then click the 'Safely Remove Hardware' icon in the Windows
taskbar notification area before disconnecting it.
Or
Run 'ntfsfix' on Linux unless you have Vista, then mount NTFS with
the 'force' option read-write, or with the 'ro' option read-only.
Or
Mount the NTFS volume with the 'ro' option in read-only mode.
noname:~

jetzt heißen die Laufwerke "sda"... und ich habe weder XP noch Vista installiert, aber whrscheinlich geht es um ntfs
 
Run 'ntfsfix' on Linux unless you have Vista, then mount NTFS with
dann mach das mal mit "ntfsfix".
mehr fällt mir auch nicht ein. evtl. die HD neu mit nfts formatieren, falls da keine daten drauf sind.
 
Is es sinnvoll, für die ntfs-partition "sync" (in der /etc/fstab) zu nutzen, wenn man Datenverlust durch Systemabsturz o.ä. verhindern will? Oder ist das übertrieben?
 
Hallo!
Wenn ich meine exteren ntfs Festplatte mounten will hab ich den von euch benutzten befehl benutzt:
mount -t ntfs-3g -o force /dev/sda1 /media/TREKSTOR
Leider bekomme ich folgende Fehlermeldung:

wARNING: Dirty volume mount was forced by the 'force' mount option.
fusermount: mountpoint is not empty
fusermount: if you are sure this is safe, use the 'nonempty' mount option
FUSE mount point creation error: Datei oder Verzeichnis nicht gefunden
Unmounting /dev/sda1 (TREKSTOR)

Und im mount-manual find ich leider nicht zu "nonempty".
Weiß jemand von euch vielleicht Rat?
Danke!
VG,
Martin
 
sieht aus als wäre das verzeichnis in das du mounten willst nicht leer

zwei Möglichkeiten:
1. (die bessere zuerst) setz den mountpoint auf ein leeres Verzeichnis:
Code:
mount -t ntfs-3g -o force /dev/sda1 /media/blubdibla
2. (etwas riskant da daten im verzeichnis /media/trekstor verloren gehen könnten)
Code:
mount -t ntfs-3g -o force -o nonempty /dev/sda1 /media/blubdibla
Oder existiert das verzeichnis /media/trekstor noch gar nicht? Falls dem so ist: anlegen!
Code:
mkdir /media/trekstor
 
Hi IceHawk!
Der erste TIpp hat fkt!
Danke dir!

Martin
 
Ich habe das alles auch soweit hinbekommen, und kann nun als Root auf die NTFS Festplatte schreiben, doch leider kann ich nur 7,5 GB beschreiben, mehr zeigt mir Nautilus nicht an als Platz, doch ist das eine 150GB Platte??? wie kann das sein ? Und wie änder ich das ?
 

Ähnliche Themen

es kommen abwechselnd neuere Distributionen...

Samba 3.6.25 - OpenLDAP Setup

2 Ordner unter wget kopieren

Grub Boot Menü - Windows 10 hinzufügen

ip6tables Problem

Zurück
Oben