Emess
Turmspringer
Hab linux-image-2.6.18-4-686 und den passenden header installiert nach neustart war der GAU da.
Da hatts mir wohl die menu.lst zerschossen.
Wenn jetzt mit Knoppix starte ist meine rootpartition hda7 und swap ist hda8.
Wenn ich mich recht erinner, war das vorher hda8 und hda9.
Hier sind mal die menu.lst und sicherung sowie fdisk -l unter Knoppix
Sicherung
fdisk -l
danke fürs viele lesen!
Code:
root (hd0,7)
Filesystem type unknown, partition type 0x82
kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/hda8 ro vga=791
Error 17: cannot mount selectet partitionDa hatts mir wohl die menu.lst zerschossen.
Wenn jetzt mit Knoppix starte ist meine rootpartition hda7 und swap ist hda8.
Wenn ich mich recht erinner, war das vorher hda8 und hda9.
Hier sind mal die menu.lst und sicherung sowie fdisk -l unter Knoppix
Code:
menu.lst
#menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 2
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda8 ro vga=791
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,7)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.18-4-686
root (hd0,7)
kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/hda8 ro vga=791
initrd /boot/initrd.img-2.6.18-4-686
savedefault
title Debian GNU/Linux, kernel 2.6.18-4-686 (single-user mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/hda8 ro vga=791 single
initrd /boot/initrd.img-2.6.18-4-686
savedefault
title Debian GNU/Linux, kernel 2.6.18-3-686
root (hd0,7)
kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/hda8 ro vga=791
initrd /boot/initrd.img-2.6.18-3-686
savedefault
title Debian GNU/Linux, kernel 2.6.18-3-686 (single-user mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/hda8 ro vga=791 single
initrd /boot/initrd.img-2.6.18-3-686
savedefault
### END DEBIAN AUTOMAGIC KERNELS LIST
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Windows XP
root (hd0,0)
savedefault
makeactive
chainloader +1Sicherung
Code:
menu.lst~
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 2
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda8 ro vga=791
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,7)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.18-3-686
root (hd0,7)
kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/hda8 ro vga=791
initrd /boot/initrd.img-2.6.18-3-686
savedefault
title Debian GNU/Linux, kernel 2.6.18-3-686 (single-user mode)
root (hd0,7)
kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/hda8 ro vga=791 single
initrd /boot/initrd.img-2.6.18-3-686
savedefault
### END DEBIAN AUTOMAGIC KERNELS LIST
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Windows XP
root (hd0,0)
savedefault
makeactive
chainloader +1fdisk -l
Code:
fdisk -l
root@0[knoppix]# fdisk -l
Platte /dev/hda: 60.0 GByte, 60011642880 Byte
255 Köpfe, 63 Sektoren/Spuren, 7296 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Gerät boot. Anfang Ende Blöcke Id System
/dev/hda1 * 1 1530 12289693+ 7 HPFS/NTFS
/dev/hda2 1531 7296 46315395 f W95 Erw. (LBA)
/dev/hda5 1531 4080 20482843+ 7 HPFS/NTFS
/dev/hda6 4081 5865 14337981 b W95 FAT32
/dev/hda7 5866 7202 10739421 83 Linux
/dev/hda8 7203 7296 755023+ 82 Linux Swap / Solaris
root@0[knoppix]#danke fürs viele lesen!
