Mustek 1200CU USB Scanner vs. Kernel 2.6

[atomical]

Hallo zusammen!

Mein Mustek Scanner will nicht :confused: - allerdings lief das Teil (damals unter RedHat 9) - wunderbar - jetzt unter Gentoo mit dem 2.6.5-rc3-mm4 Kernel klappt es einfach nicht.

Versionsmäßig sind die neuesten Versionen (die ~x86 ebuilds) aller nötigen Tools (sane front+back / libusb) installiert.

Hier die Ausgabe einiger Tools ...

May 28 22:46:01 phoenix usb 2-3: new full speed USB device using address 2

phoenix / # lsusb
Bus 003 Device 002: ID 1019:0c55
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 055f:0001 Mustek Systems, Inc. ScanExpress 1200 CU
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
phoenix / #

phoenix / # sane-find-scanner /dev/usb
 
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.
 
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a driver for your USB host controller and have installed a
  # kernel scanner module.
 
  # Not checking for parallel port scanners.
 
  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
phoenix / #

Als Option hab ich /dev/usb, /proc/bus/usb/ and /proc/bus/usb/002/002 ausprobiert.

phoenix / # SANE_DEBUG_MUSTEK_USB=255 scanimage -L
[sanei_debug] Setting debug level of mustek_usb to 255.
[mustek_usb] SANE Mustek USB backend version 1.0 build 18 from sane-backends 1.0.13
[mustek_usb] sane_init: authorize != null
[mustek_usb] sane_init: reading config file `mustek_usb.conf'
[mustek_usb] sane_init: config file line 1: ignoring comment line
[mustek_usb] sane_init: config file line 2: ignoring comment line
[mustek_usb] sane_init: config file line 3: ignoring empty line
[mustek_usb] sane_init: config file line 4: trying to attach `usb 0x055f 0x0001'
[mustek_usb] attach: start: devp != NULL, may_wait = 0
[mustek_usb] attach: trying to open device `libusb:002:002'
[mustek_usb] attach: device `libusb:002:002' successfully opened
[mustek_usb] attach: trying to identify device `libusb:002:002'
[mustek_usb] usb_low_identify_scanner: start
[mustek_usb] usb_low_identify_scanner: exit

Ab hier ist Schicht - keine Möglichkeit mehr, den scanimage Prozess zu beenden.

Any hints?