keine Kabelverbindung unter Ubuntu

B-52

B-52

Routinier
Hallo Community,

seit zwei Tagen kann ich keine Internetverbindung mehr bei meinem HP Laptop aufbauen. Stecke ich das Netzwerkkabel ein, passiert rein gar nichts. Irgendwas habe ich irgendwo herumgespielt. Aber wo? (Kabelbruch ausgeschlossen)

Paradoxerweise funktioniert die WLAN-Verbindung einwandfrei!

Was genau kann ich tun um meine Kabelverbindung zu aktivieren?

Gruss B-52
 
Wahrscheinlich reicht ein "sudo dhclient eth0" wenn das Kabel eingesteckt ist. Was sagt denn "ifconfig -a"?

MfG,
bytepool
 
Abend,

am Netzwerkmanager von Gnome rumgespielt? Einfach mal ein Rechtsklick auf das Netzwerksymbol oben in der Startleiste* gemacht und schauen ob das Kalbenetzwerk aktiv ist oder nicht.

mfg
HeadCrash

*wie heißt das Ding unter Ubuntu / Gnome? :D
 
bytepool schrieb:
Was sagt denn "ifconfig -a"?
Zum Vergrößern anklicken....

Code: 
eth0      Link encap:Ethernet  Hardware Adresse 98:4b:e1:9b:48:0d  
          UP BROADCAST MULTICAST  MTU:1500  Metrik:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:27 Basisadresse:0xe000 

eth1      Link encap:Ethernet  Hardware Adresse e0:2a:82:ac:08:a8  
          inet Adresse:192.168.1.49  Bcast:192.168.1.255  Maske:255.255.255.0
          inet6-Adresse: fe80::e22a:82ff:feac:8a8/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:1044 errors:0 dropped:0 overruns:0 frame:3217
          TX packets:708 errors:12 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:609437 (609.4 KB)  TX bytes:163892 (163.8 KB)
          Interrupt:16 

lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metrik:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0 
          RX bytes:480 (480.0 B)  TX bytes:480 (480.0 B)

pan0      Link encap:Ethernet  Hardware Adresse 9e:fa:be:c2:f4:1c  
          BROADCAST MULTICAST  MTU:1500  Metrik:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

@HeadCrash - nein, das war es nicht... schon probiert

@bytepool - sudo dhclient eth0 ergibt:

Code: 
yuna@ubuntu:~$ sudo dhclient eth0
[sudo] password for yuna: 
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/98:4b:e1:9b:48:0d
Sending on   LPF/eth0/98:4b:e1:9b:48:0d
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
 
Zuletzt bearbeitet:
D.h. eth1 ist deine wlan Karte? Wenn du's nicht weisst, mit iwconfig testen. Wie gesagt, dhclient eth0 sollte es tun, wenn es keine Hardware Probleme oder Probleme mit dem DHCP Server des Routers gibt.
 
B-52 schrieb:
Code: 
yuna@ubuntu:~$ sudo dhclient eth0
[sudo] password for yuna: 
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/98:4b:e1:9b:48:0d
Sending on   LPF/eth0/98:4b:e1:9b:48:0d
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
Zum Vergrößern anklicken....

Mit anderen Worten, entweder das Kabel oder die Netzwerkkarte ist kaputt, oder es laeuft kein DHCP Server im Netzwerk. ;)

Edit:
Aber da das Interface vom OS vernuenftig angesprochen werden kann, und du sagst das Kabel ist ok, wuerd ich auf letzteres Tippen, Probleme am Router.

MfG,
bytepool
 
bytepool schrieb:
Probleme am Router.
Zum Vergrößern anklicken....

das ist ja toll! Ich glaub ich gehe ins Kloster und werde Mönch... :D

--EDIT--
Probleme am Router können ebenfalls ausgeschlossen werden. Die Workstation bekommt sofort eine Verbindung via eth0. Somit befürchte ich, wie von bytepool gesagt, meine Netzwerkkarte hat das Zeitliche gesegnet...
 
Zuletzt bearbeitet:
B-52 schrieb:
Somit befürchte ich, wie von bytepool gesagt, meine Netzwerkkarte hat das Zeitliche gesegnet...
Zum Vergrößern anklicken....
Oder vielleicht auch einfach nur ein Wackelkontakt am Anschluss oder so? Es klingt dann jedenfalls stark nach einem Hardware Problem.
 
bytepool schrieb:
Es klingt dann jedenfalls stark nach einem Hardware Problem.
Zum Vergrößern anklicken....

Vielen Dank für das Feedback. Ein defekt der Netzwerkkarte scheint sich immer wie mehr zu bestätigen. Versuche ich z.B. Ubuntu oder Debian neu zu installieren, gibt es während der Installation ein Fehler bei Versuch das Netzwerk via DHCP zu verbinden an...

Es schei*** mich nur an, den gesamten Garantie-Blablabla durchzugehen... Eigentlich könnte ich ja mit einer defekten Netzwerkkarte leben, solange das wlan funktioniert...

Gruss B-52
 
Du hast bislang noch nicht bestaetigt, dass ueberhaupt ein dhcp-Server im Netzwerk laeuft. Vielleicht musst Du Deiner Karte nur eine IP-Adresse geben.
Unabhaengig von der IP-Adresse sollte 'dmesg' beim Einstecken der Netzwerkkabels eine Nachricht ueber eth0 anzeigen. Wenn das nicht der Fall ist, und sich auch mit 'ifconfig eth0 up' nichts daran aendert, wuerde ich Deine Vermutung ueber die defekte Netzwerkkarte erst unterstuetzen.
 
rikola schrieb:
Unabhaengig von der IP-Adresse sollte 'dmesg' beim Einstecken der Netzwerkkabels eine Nachricht ueber eth0 anzeigen.
Zum Vergrößern anklicken....

tut es, dmesg ergibt eine ellenlange Ausgabe, welche ich hier unmöglich posten kann.

ifconfig eth0 up ergiebt:

Code: 
yuna@ubuntu:~$ ifconfig eth0 up
SIOCSIFFLAGS: Keine Berechtigung

Die Ironie des Schicksals: mein Laptop läuft noch unter Garantie. Möchte ich tatsächlich Garantieanspruch erheben und das Laptop einsenden, MUSS ich es in den Originalzustand zurückversetzen und Windows 7 neu aufsetzen. Dumm nur: ich habe sogar die Recovery Partition flachgelegt. Ausrede der Verkaufsstelle: Selbstverschuldung!
 
tut es, dmesg ergibt eine ellenlange Ausgabe, welche ich hier unmöglich posten kann.
Zum Vergrößern anklicken....
Die relevanten Informationen werden die letzten Zeilen direkt nach dem Anstecken sein. (Das kann man sich aber auch denken, indem man sich den "ellenlangen" Text einfach mal anschaut.)

Und 'ifconfig' benötigt für Änderungen in der Regel root Rechte.
 
sinn3r schrieb:
Und 'ifconfig' benötigt für Änderungen in der Regel root Rechte.
Zum Vergrößern anklicken....

Sorry, mein Fehler, hier mit root

Code: 
root@ubuntu:/home/yuna# ifconfig
eth0      Link encap:Ethernet  Hardware Adresse 98:4b:e1:9b:48:0d  
          UP BROADCAST MULTICAST  MTU:1500  Metrik:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:28 Basisadresse:0xe000 

eth1      Link encap:Ethernet  Hardware Adresse e0:2a:82:ac:08:a8  
          inet Adresse:192.168.1.49  Bcast:192.168.1.255  Maske:255.255.255.0
          inet6-Adresse: fe80::e22a:82ff:feac:8a8/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:421 errors:0 dropped:0 overruns:0 frame:2138
          TX packets:516 errors:6 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:256013 (256.0 KB)  TX bytes:133789 (133.7 KB)
          Interrupt:16 

lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metrik:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0 
          RX bytes:480 (480.0 B)  TX bytes:480 (480.0 B)

sinn3r schrieb:
Die relevanten Informationen werden die letzten Zeilen direkt nach dem Anstecken sein.
Zum Vergrößern anklicken....

ähem.. was genau muss ich suchen? Versuche dmesg zu posten

Code: 
[    1.926669] system 00:05: ioport range 0x400-0x47f has been reserved
[    1.926671] system 00:05: ioport range 0x500-0x57f has been reserved
[    1.926673] system 00:05: ioport range 0x164e-0x164f has been reserved
[    1.926675] system 00:05: ioport range 0x380-0x38e has been reserved
[    1.926680] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.926682] system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved
[    1.926684] system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved
[    1.926686] system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved
[    1.926688] system 00:0a: iomem range 0xf0000000-0xf1ffffff has been reserved
[    1.926689] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[    1.926692] system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved
[    1.926694] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[    1.926696] system 00:0a: iomem range 0xc4600000-0xc4600fff has been reserved
[    1.931338] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[    1.931342] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[    1.931379] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.931381] pci 0000:00:01.0:   IO window: 0x4000-0x4fff
[    1.931384] pci 0000:00:01.0:   MEM window: 0xc4400000-0xc44fffff
[    1.931386] pci 0000:00:01.0:   PREFETCH window: 0x000000a0000000-0x000000afffffff
[    1.931390] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    1.931393] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    1.931398] pci 0000:00:1c.0:   MEM window: 0xc3400000-0xc43fffff
[    1.931403] pci 0000:00:1c.0:   PREFETCH window: 0x000000c0400000-0x000000c13fffff
[    1.931410] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    1.931413] pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
[    1.931419] pci 0000:00:1c.1:   MEM window: 0xc2400000-0xc33fffff
[    1.931423] pci 0000:00:1c.1:   PREFETCH window: 0x000000c1400000-0x000000c23fffff
[    1.931430] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    1.931432] pci 0000:00:1e.0:   IO window: disabled
[    1.931437] pci 0000:00:1e.0:   MEM window: disabled
[    1.931441] pci 0000:00:1e.0:   PREFETCH window: disabled
[    1.931453]   alloc irq_desc for 16 on node -1
[    1.931454]   alloc kstat_irqs on node -1
[    1.931458] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.931461] pci 0000:00:01.0: setting latency timer to 64
[    1.931468]   alloc irq_desc for 17 on node -1
[    1.931469]   alloc kstat_irqs on node -1
[    1.931472] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.931476] pci 0000:00:1c.0: setting latency timer to 64
[    1.931485] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.931490] pci 0000:00:1c.1: setting latency timer to 64
[    1.931498] pci 0000:00:1e.0: setting latency timer to 64
[    1.931502] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.931503] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.931505] pci_bus 0000:01: resource 0 io:  [0x4000-0x4fff]
[    1.931507] pci_bus 0000:01: resource 1 mem: [0xc4400000-0xc44fffff]
[    1.931508] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff]
[    1.931510] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    1.931512] pci_bus 0000:02: resource 1 mem: [0xc3400000-0xc43fffff]
[    1.931513] pci_bus 0000:02: resource 2 pref mem [0xc0400000-0xc13fffff]
[    1.931515] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    1.931516] pci_bus 0000:03: resource 1 mem: [0xc2400000-0xc33fffff]
[    1.931518] pci_bus 0000:03: resource 2 pref mem [0xc1400000-0xc23fffff]
[    1.931520] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    1.931521] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[    1.931523] pci_bus 0000:7f: resource 0 io:  [0x00-0xffff]
[    1.931525] pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.931551] NET: Registered protocol family 2
[    1.931743] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.932718] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.934383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.934594] TCP: Hash tables configured (established 524288 bind 65536)
[    1.934596] TCP reno registered
[    1.934690] NET: Registered protocol family 1
[    1.934707] pci 0000:00:02.0: Boot video device
[    1.966743] Simple Boot Flag at 0x44 set to 0x1
[    1.966978] Scanning for low memory corruption every 60 seconds
[    1.967074] audit: initializing netlink socket (disabled)
[    1.967082] type=2000 audit(1317319854.380:1): initialized
[    1.975469] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.976535] VFS: Disk quotas dquot_6.5.2
[    1.976577] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.977045] fuse init (API version 7.13)
[    1.977107] msgmni has been set to 15599
[    1.977295] alg: No test for stdrng (krng)
[    1.977343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.977346] io scheduler noop registered
[    1.977347] io scheduler anticipatory registered
[    1.977348] io scheduler deadline registered
[    1.977374] io scheduler cfq registered (default)
[    1.977475]   alloc irq_desc for 24 on node -1
[    1.977477]   alloc kstat_irqs on node -1
[    1.977484] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    1.977488] pcieport 0000:00:01.0: setting latency timer to 64
[    1.977583]   alloc irq_desc for 25 on node -1
[    1.977584]   alloc kstat_irqs on node -1
[    1.977592] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    1.977602] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.977725]   alloc irq_desc for 26 on node -1
[    1.977727]   alloc kstat_irqs on node -1
[    1.977734] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    1.977743] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.977819] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.977986] _OSC invalid UUID
[    1.978117] _OSC invalid UUID
[    1.978257] _OSC invalid UUID
[    1.978384] _OSC invalid UUID
[    1.978415] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.036863] ACPI: AC Adapter [ACAD] (off-line)
[    2.036919] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.036922] ACPI: Power Button [PWRB]
[    2.036951] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.037371] ACPI: Lid Switch [LID0]
[    2.037420] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.037422] ACPI: Power Button [PWRF]
[    2.038803] ACPI: SSDT 000000009b691a18 004B6 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    2.039512] ACPI: SSDT 000000009b68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    2.040101] Monitor-Mwait will be used to enter C-1 state
[    2.040123] Monitor-Mwait will be used to enter C-2 state
[    2.040140] Monitor-Mwait will be used to enter C-3 state
[    2.040177] processor LNXCPU:00: registered as cooling_device0
[    2.040776] ACPI: SSDT 000000009b690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    2.041319] ACPI: SSDT 000000009b68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    2.042045] processor LNXCPU:01: registered as cooling_device1
[    2.043000] processor LNXCPU:02: registered as cooling_device2
[    2.043924] processor LNXCPU:03: registered as cooling_device3
[    2.246854] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
[    2.247879] Linux agpgart interface v0.103
[    2.247901] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.248769] brd: module loaded
[    2.249068] loop: module loaded
[    2.249127] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    2.249387] Fixed MDIO Bus: probed
[    2.249409] PPP generic driver version 2.4.2
[    2.249429] tun: Universal TUN/TAP device driver, 1.6
[    2.249431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.249483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.249505] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.249521] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.249524] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.249546] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.249579] ehci_hcd 0000:00:1a.0: debug port 2
[    2.253443] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    2.253458] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc450a000
[    2.275913] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.276025] usb usb1: configuration #1 chosen from 1 choice
[    2.276047] hub 1-0:1.0: USB hub found
[    2.276052] hub 1-0:1.0: 3 ports detected
[    2.276093]   alloc irq_desc for 21 on node -1
[    2.276095]   alloc kstat_irqs on node -1
[    2.276099] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.276110] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.276113] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.276136] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.276162] ehci_hcd 0000:00:1d.0: debug port 2
[    2.280051] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    2.280062] ehci_hcd 0000:00:1d.0: irq 21, io mem 0xc4509000
[    2.295865] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.295957] usb usb2: configuration #1 chosen from 1 choice
[    2.295975] hub 2-0:1.0: USB hub found
[    2.295979] hub 2-0:1.0: 3 ports detected
[    2.296014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.296022] uhci_hcd: USB Universal Host Controller Interface driver
[    2.296068] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.315749] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.315754] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.315812] mice: PS/2 mouse device common for all mice
[    2.315892] rtc_cmos 00:06: RTC can wake from S4
[    2.315917] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.315947] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.316035] device-mapper: uevent: version 1.0.3
[    2.316117] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.316197] device-mapper: multipath: version 1.1.0 loaded
[    2.316200] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.316447] cpuidle: using governor ladder
[    2.318490] cpuidle: using governor menu
[    2.318752] TCP cubic registered
[    2.318860] NET: Registered protocol family 10
[    2.319399] NET: Registered protocol family 17
[    2.322970] PM: Resume from disk failed.
[    2.322979] registered taskstats version 1
[    2.323421]   Magic number: 11:723:191
[    2.323457] acpi device:1d: hash matches
[    2.323547] rtc_cmos 00:06: setting system clock to 2011-09-29 18:10:55 UTC (1317319855)
[    2.323550] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.323551] EDD information not available.
[    2.323614] Freeing unused kernel memory: 888k freed
[    2.323754] Write protecting the kernel read-only data: 7688k
[    2.335209] udev: starting version 151
[    2.340890] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.368398] ahci 0000:00:1f.2: version 3.0
[    2.368419]   alloc irq_desc for 19 on node -1
[    2.368422]   alloc kstat_irqs on node -1
[    2.368430] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.368492]   alloc irq_desc for 27 on node -1
[    2.368494]   alloc kstat_irqs on node -1
[    2.368505] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    2.368591] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    2.368596] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    2.368602] ahci 0000:00:1f.2: setting latency timer to 64
[    2.382807] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.382834] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.382951] r8169 0000:03:00.0: setting latency timer to 64
[    2.383001]   alloc irq_desc for 28 on node -1
[    2.383004]   alloc kstat_irqs on node -1
[    2.383019] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    2.383658] eth0: RTL8168d/8111d at 0xffffc90000c7e000, 98:4b:e1:9b:48:0d, XID 083000c0 IRQ 28
[    2.406345] scsi0 : ahci
[    2.406494] scsi1 : ahci
[    2.406557] scsi2 : ahci
[    2.406625] scsi3 : ahci
[    2.406683] scsi4 : ahci
[    2.406742] scsi5 : ahci
[    2.406781] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 27
[    2.406785] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 27
[    2.406787] ata3: DUMMY
[    2.406788] ata4: DUMMY
[    2.406790] ata5: DUMMY
[    2.406793] ata6: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508380 irq 27
[    2.596476] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.745379] usb 1-1: configuration #1 chosen from 1 choice
[    2.745552] hub 1-1:1.0: USB hub found
[    2.745591] hub 1-1:1.0: 6 ports detected
[    2.754891] ata6: SATA link down (SStatus 0 SControl 300)
[    2.755561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.755599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.756059] ata1.00: ATA-8: TOSHIBA MK5061GSYN, MH000C, max UDMA/100
[    2.756063] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.756651] ata1.00: configured for UDMA/100
[    2.758226] ata2.00: ATAPI: hp      DVDRAM GT31L, MR52, max UDMA/100
[    2.761211] ata2.00: configured for UDMA/100
[    2.774986] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5061GS MH00 PQ: 0 ANSI: 5
[    2.775177] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.775272] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.775327] sd 0:0:0:0: [sda] Write Protect is off
[    2.775330] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.775354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.775487]  sda:
[    2.776498] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT31L     MR52 PQ: 0 ANSI: 5
[    2.780977] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.780984] Uniform CD-ROM driver Revision: 3.20
[    2.781090] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.781129] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.854337]  sda1 sda2 <
[    2.865875] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.880217]  sda5 >
[    2.880573] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.959829] ACPI: Battery Slot [BAT0] (battery present)
[    3.024213] usb 2-1: configuration #1 chosen from 1 choice
[    3.024375] hub 2-1:1.0: USB hub found
[    3.024438] hub 2-1:1.0: 8 ports detected
[    3.105400] usb 1-1.2: new low speed USB device using ehci_hcd and address 3
[    3.228572] usb 1-1.2: configuration #1 chosen from 1 choice
[    3.250563] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.255733] usbcore: registered new interface driver hiddev
[    3.260335] input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[    3.260428] generic-usb 0003:0461:4D62.0001: input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1a.0-1.2/input0
[    3.260451] usbcore: registered new interface driver usbhid
[    3.260453] usbhid: v2.6:USB HID core driver
[    3.323680] usb 1-1.3: new full speed USB device using ehci_hcd and address 4
[    3.447453] usb 1-1.3: configuration #1 chosen from 1 choice
[    3.532565] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
[    3.644582] usb 2-1.3: configuration #1 chosen from 1 choice
[    3.742081] usb 2-1.5: new high speed USB device using ehci_hcd and address 4
[    4.521718] usb 2-1.5: configuration #1 chosen from 1 choice
[   12.089575] udev: starting version 151
[   12.116822] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset
[   12.117547] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[   12.193343] Adding 19803128k swap on /dev/sda5.  Priority:-1 extents:1 across:19803128k 
[   12.195072] lp: driver loaded but no devices found
[   12.200062] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[   12.202616] Bluetooth: Core ver 2.15
[   12.207864] NET: Registered protocol family 31
[   12.207866] Bluetooth: HCI device and connection manager initialized
[   12.207870] Bluetooth: HCI socket layer initialized
[   12.219076] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   12.219226] usbcore: registered new interface driver btusb
[   12.221129] lis3lv02d: laptop model unknown, using default axes configuration
[   12.223807] vga16fb: initializing
[   12.223811] vga16fb: mapped to 0xffff8800000a0000
[   12.223882] fb0: VGA16 VGA frame buffer device
[   12.267323] lis3lv02d: 1-byte sensor found
[   12.274214] [drm] Initialized drm 1.1.0 20060810
[   12.278199] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[   12.278332] Registered led device: hp::hddprotect
[   12.278354] lis3lv02d driver loaded.
[   12.298564] Linux video capture interface: v2.00
[   12.302319] uvcvideo: Found UVC 1.00 device 2SF022 (0bda:5801)
[   12.319292] type=1505 audit(1317319865.511:2):  operation="profile_load" pid=599 name="/sbin/dhclient3"
[   12.319800] type=1505 audit(1317319865.511:3):  operation="profile_load" pid=599 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   12.320092] type=1505 audit(1317319865.511:4):  operation="profile_load" pid=599 name="/usr/lib/connman/scripts/dhclient-script"
[   12.321307] input: 2SF022 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
[   12.321343] type=1505 audit(1317319865.521:5):  operation="profile_replace" pid=611 name="/sbin/dhclient3"
[   12.321425] usbcore: registered new interface driver uvcvideo
[   12.321431] USB Video Class driver (v0.1.0)
[   12.321848] type=1505 audit(1317319865.521:6):  operation="profile_replace" pid=611 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   12.322141] type=1505 audit(1317319865.521:7):  operation="profile_replace" pid=611 name="/usr/lib/connman/scripts/dhclient-script"
[   12.330912] lib80211: common routines for IEEE802.11 drivers
[   12.330914] lib80211_crypt: registered algorithm 'NULL'
[   12.331681] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.331685] i915 0000:00:02.0: setting latency timer to 64
[   12.343711] mtrr: no more MTRRs available
[   12.343714] [drm] MTRR allocation failed.  Graphics performance may suffer.
[   12.343832]   alloc irq_desc for 29 on node -1
[   12.343834]   alloc kstat_irqs on node -1
[   12.343842] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[   12.343847] [drm] set up 31M of stolen space
[   12.428950] Console: switching to colour frame buffer device 80x30
[   12.913289] fb1: inteldrmfb frame buffer device
[   12.913291] registered panic notifier
[   12.920410] acpi device:01: registered as cooling_device4
[   12.921273] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   12.921380] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   12.931885] acpi device:13: registered as cooling_device5
[   12.936315] acpi device:14: registered as cooling_device6
[   12.936553] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:02/input/input9
[   12.936641] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[   12.936718] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.936885]   alloc irq_desc for 22 on node -1
[   12.936888]   alloc kstat_irqs on node -1
[   12.936896] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.936965] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.945437] wl: module license 'MIXED/Proprietary' taints kernel.
[   12.945441] Disabling lock debugging due to kernel taint
[   12.948482] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.948489] wl 0000:02:00.0: setting latency timer to 64
[   13.012033] lib80211_crypt: registered algorithm 'TKIP'
[   13.012405] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 
[   13.077509] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   13.101826] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.101913] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.102504] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.102572] HDA Intel 0000:01:00.1: setting latency timer to 64
[   13.298365] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400
[   13.391073] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[   13.429837] type=1505 audit(1317319866.631:8):  operation="profile_load" pid=939 name="/usr/share/gdm/guest-session/Xsession"
[   13.429982] type=1505 audit(1317319866.631:9):  operation="profile_replace" pid=940 name="/sbin/dhclient3"
[   13.430473] type=1505 audit(1317319866.631:10):  operation="profile_replace" pid=940 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.430759] type=1505 audit(1317319866.631:11):  operation="profile_replace" pid=940 name="/usr/lib/connman/scripts/dhclient-script"
[   13.702810] r8169: eth0: link down
[   13.703418] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.757199] Bluetooth: L2CAP ver 2.14
[   13.757202] Bluetooth: L2CAP socket layer initialized
[   13.761924] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.761927] Bluetooth: BNEP filters: protocol multicast
[   13.768833] Bridge firewalling registered
[   13.774272] ppdev: user-space parallel port driver
[   13.776174] Bluetooth: SCO (Voice Link) ver 0.6
[   13.776176] Bluetooth: SCO socket layer initialized
[   13.855024] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   13.855027] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   14.230166] CPU0 attaching NULL sched-domain.
[   14.230170] CPU1 attaching NULL sched-domain.
[   14.230172] CPU2 attaching NULL sched-domain.
[   14.230174] CPU3 attaching NULL sched-domain.
[   14.307364] CPU0 attaching sched-domain:
[   14.307367]  domain 0: span 0-1 level SIBLING
[   14.307369]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   14.307373]   domain 1: span 0-3 level MC
[   14.307374]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   14.307378]    domain 2: span 0-3 level CPU
[   14.307379]     groups: 0-3 (cpu_power = 2356)
[   14.307384] CPU1 attaching sched-domain:
[   14.307385]  domain 0: span 0-1 level SIBLING
[   14.307387]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   14.307390]   domain 1: span 0-3 level MC
[   14.307391]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   14.307395]    domain 2: span 0-3 level CPU
[   14.307396]     groups: 0-3 (cpu_power = 2356)
[   14.307399] CPU2 attaching sched-domain:
[   14.307401]  domain 0: span 2-3 level SIBLING
[   14.307402]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[   14.307405]   domain 1: span 0-3 level MC
[   14.307407]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   14.307410]    domain 2: span 0-3 level CPU
[   14.307412]     groups: 0-3 (cpu_power = 2356)
[   14.307414] CPU3 attaching sched-domain:
[   14.307416]  domain 0: span 2-3 level SIBLING
[   14.307417]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[   14.307420]   domain 1: span 0-3 level MC
[   14.307422]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   14.307425]    domain 2: span 0-3 level CPU
[   14.307426]     groups: 0-3 (cpu_power = 2356)
[   14.307895] CPU0 attaching NULL sched-domain.
[   14.307897] CPU1 attaching NULL sched-domain.
[   14.307899] CPU2 attaching NULL sched-domain.
[   14.307900] CPU3 attaching NULL sched-domain.
[   14.397145] CPU0 attaching sched-domain:
[   14.397150]  domain 0: span 0-1 level SIBLING
[   14.397153]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   14.397159]   domain 1: span 0-3 level MC
[   14.397162]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   14.397170] CPU1 attaching sched-domain:
[   14.397175]  domain 0: span 0-1 level SIBLING
[   14.397177]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   14.397180]   domain 1: span 0-3 level MC
[   14.397181]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   14.397185] CPU2 attaching sched-domain:
[   14.397186]  domain 0: span 2-3 level SIBLING
[   14.397188]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[   14.397191]   domain 1: span 0-3 level MC
[   14.397192]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   14.397196] CPU3 attaching sched-domain:
[   14.397198]  domain 0: span 2-3 level SIBLING
[   14.397199]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[   14.397202]   domain 1: span 0-3 level MC
[   14.397204]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   17.254873] CPU0 attaching NULL sched-domain.
[   17.254878] CPU1 attaching NULL sched-domain.
[   17.254880] CPU2 attaching NULL sched-domain.
[   17.254882] CPU3 attaching NULL sched-domain.
[   17.320771] CPU0 attaching sched-domain:
[   17.320776]  domain 0: span 0-1 level SIBLING
[   17.320779]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   17.320784]   domain 1: span 0-3 level MC
[   17.320786]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   17.320793] CPU1 attaching sched-domain:
[   17.320795]  domain 0: span 0-1 level SIBLING
[   17.320797]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   17.320801]   domain 1: span 0-3 level MC
[   17.320803]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   17.320808] CPU2 attaching sched-domain:
[   17.320810]  domain 0: span 2-3 level SIBLING
[   17.320812]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[   17.320817]   domain 1: span 0-3 level MC
[   17.320819]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   17.320824] CPU3 attaching sched-domain:
[   17.320826]  domain 0: span 2-3 level SIBLING
[   17.320828]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[   17.320832]   domain 1: span 0-3 level MC
[   17.320834]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   17.321407] CPU0 attaching NULL sched-domain.
[   17.321411] CPU1 attaching NULL sched-domain.
[   17.321414] CPU2 attaching NULL sched-domain.
[   17.321415] CPU3 attaching NULL sched-domain.
[   17.390605] CPU0 attaching sched-domain:
[   17.390610]  domain 0: span 0-1 level SIBLING
[   17.390613]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   17.390618]   domain 1: span 0-3 level MC
[   17.390620]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   17.390627] CPU1 attaching sched-domain:
[   17.390629]  domain 0: span 0-1 level SIBLING
[   17.390631]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   17.390636]   domain 1: span 0-3 level MC
[   17.390637]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   17.390643] CPU2 attaching sched-domain:
[   17.390645]  domain 0: span 2-3 level SIBLING
[   17.390646]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[   17.390651]   domain 1: span 0-3 level MC
[   17.390653]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   17.390660] CPU3 attaching sched-domain:
[   17.390661]  domain 0: span 2-3 level SIBLING
[   17.390663]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[   17.390668]   domain 1: span 0-3 level MC
[   17.390670]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   17.748578] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   23.953675] eth1: no IPv6 routers present
yuna@ubuntu:~$
 
Sorry, mein Fehler, hier mit root
Zum Vergrößern anklicken....
Und jetzt noch mal den kompletten ifup Befehl.

Interessant ist schon mal
Code: 
[   13.702810] r8169: eth0: link down
[   13.703418] ADDRCONF(NETDEV_UP): eth0: link is not ready

Schon versucht, der Schnittstelle eine feste IP zu geben und die Routen manuell anzulegen?
 
diese Antwort gelöscht, da Problem gelöst. Siehe unten!
 
Zuletzt bearbeitet:
---EDIT---

heute ist ein Wunder geschehen. Es läuft wieder...

Ich war so verzweifelt, dass ich jedem Hinweis nachging. Und hier war die Lösung!

1. Laptop vollkommen vom Strom trennen (Akku rausnehmen)
2. eine Minute warten
3. Neustart und fertig!

Die Kabelverbindung steht. Ich verstehe die Welt nicht mehr...

Code: 
ADDRCONF(NETDEV_UP): eth0: link is not ready
scheint ein bekanntes Problem im weltweitem Netz zu sein. Nochmals vielen Dank an Allen, welche versucht haben zu Helfen!

Gruss B-52
 
Zuletzt bearbeitet:
Anmelden, um zu antworten.

Ähnliche Themen

Browser-Problem
Browser-Problem: Irgendwo muss man ja anfangen: Meine (uptodate!) Browser stürzen unkalkulierbar ab - Chromium und Firefox. Unter Ubuntu wie auch unter Linux Mint. Nicht...

wlan Treiber (RTL8111/8168) unter Ubuntu
wlan Treiber (RTL8111/8168) unter Ubuntu: Hallo Community, versuche verzweifelt, mein WLAN (HP Laptop) unter Ubuntu 10.04 LTS zum Laufen zu bringen. lspci gibt mir folgendes bekannt...

Netzwerkproblem mit Ubuntu 7.10
Netzwerkproblem mit Ubuntu 7.10: Hallo, ich habe mir vor 2 Tagen Ubuntu 7.10 heruntergeladen und mir eine virtuelle Maschine in "Virtual Box" von Sun angelegt. Danach habe ich wie...

Router crash bei Fedora 15!?
Router crash bei Fedora 15!?: Hi Ich habe ein merkwürdiges Problem :think: Ich habe ein Netbook mit Fedora 15 32Bit und ein Laptop mit Fedora 15 als 64Bit version. Zu Hause komme ich...

[Ubuntu 10.04] Netzwerk läuft nicht mehr richtig
[Ubuntu 10.04] Netzwerk läuft nicht mehr richtig: [Ubuntu 10.04] [gelöst] Netzwerk läuft nicht mehr richtig Heyho, Forget it! Scheinbar wurde durch den leer werdenden Akku via NM das Netzwerk deaktiviert...

Neueste Themen

Zurück
Oben