
betaros
Computerspezi
Moin,
ich habe seit kurzem einen Acer Revo r3700 und einen Philips 32pfl5405h/12 Fernseher. Nun hab ich Arch installiert und beides per HDMI verbunden. Bild klappt super, aber er gibt kein Ton von sich. Hab den Pc an HDMI 1 - Arc angeschlossen, da das wohl der HDMI-Anschluss mit Audioeingang ist.
lspci:
aplay -l
auszüge aus cat /usr/share/alsa/alsa.conf
Bei "defaults.pcm.device 7" hab ich auch schon die 3 ausprbiert, lief aber auch nicht.
Solangm bin ich am verzweifeln
Freue mich über jede Hilfe!
betaros
//Edit:
Problem gelöst. in alsamixer war S/PDIF muted. Obwohl ich vorher schon damit rumgespielt hatte, gings erst jetzt
Trotzdem dank an alle, die hier gelesen haben
ich habe seit kurzem einen Acer Revo r3700 und einen Philips 32pfl5405h/12 Fernseher. Nun hab ich Arch installiert und beides per HDMI verbunden. Bild klappt super, aber er gibt kein Ton von sich. Hab den Pc an HDMI 1 - Arc angeschlossen, da das wohl der HDMI-Anschluss mit Audioeingang ist.

lspci:
Code:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [ION] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
aplay -l
Code:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: Intel [HDA Intel], Gerät 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 7: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 8: HDMI 0 [HDMI 0]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 1: NVidia [HDA NVidia], Gerät 9: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
auszüge aus cat /usr/share/alsa/alsa.conf
Code:
defaults.ctl.card 1
defaults.pcm.card 1
defaults.pcm.device 7
Bei "defaults.pcm.device 7" hab ich auch schon die 3 ausprbiert, lief aber auch nicht.
Solangm bin ich am verzweifeln

Freue mich über jede Hilfe!
betaros
//Edit:
Problem gelöst. in alsamixer war S/PDIF muted. Obwohl ich vorher schon damit rumgespielt hatte, gings erst jetzt

Trotzdem dank an alle, die hier gelesen haben

Zuletzt bearbeitet: