Aracon
Routinier
Hallo,
ich habe ein altes Macbook 3.1 mit einer Vertex 2. Ich benutze Archlinux mit kernel 3.0.2, wenn ich das Macbook mit den pm-utils zum schlafen schicke bekomme ich merkwürde Fehler:
oder in lang:
Der Fehler tritt nur auf wenn ich das Macbook vorher auch zum schlafen geschickt habe.
Ich habe auch mal einen Bugreport auf dem Kernel Bugzilla aufgemacht. (https://bugzilla.kernel.org/show_bug.cgi?id=41022)
Habt ihr evtl. eine Idee?
ich habe ein altes Macbook 3.1 mit einer Vertex 2. Ich benutze Archlinux mit kernel 3.0.2, wenn ich das Macbook mit den pm-utils zum schlafen schicke bekomme ich merkwürde Fehler:
Code:
Aug 11 23:28:36 localhost kernel: [ 115.612306] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x6
Aug 11 23:28:36 localhost kernel: [ 115.612313] ata3.00: BMDMA stat 0x6
Aug 11 23:28:36 localhost kernel: [ 115.612318] ata3.00: failed command: READ
DMA
Aug 11 23:28:36 localhost kernel: [ 115.612327] ata3.00: cmd
c8/00:00:ba:9b:56/00:00:00:00:00/e9 tag 0 dma 131072 in
Aug 11 23:28:36 localhost kernel: [ 115.612329] res
51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
Aug 11 23:28:36 localhost kernel: [ 115.612334] ata3.00: status: { DRDY ERR }
Aug 11 23:28:36 localhost kernel: [ 115.612337] ata3.00: error: { ICRC ABRT }
Aug 11 23:28:37 localhost kernel: [ 115.956326] ata3.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x6
Aug 11 23:28:37 localhost kernel: [ 115.956336] ata3.00: BMDMA stat 0x6
Aug 11 23:28:37 localhost kernel: [ 115.956344] ata3.00: failed command: READ
DMA
Aug 11 23:28:37 localhost kernel: [ 115.956357] ata3.00: cmd
c8/00:d0:da:fb:30/00:00:00:00:00/e0 tag 0 dma 106496 in
Aug 11 23:28:37 localhost kernel: [ 115.956360] res
51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
Aug 11 23:28:37 localhost kernel: [ 115.956367] ata3.00: status: { DRDY ERR }
Aug 11 23:28:37 localhost kernel: [ 115.956372] ata3.00: error: { ICRC ABRT }oder in lang:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:18:35 CEST 2011
[ 0.000000] Command line: root=/dev/sda3 ro vga=792
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdcf4000 (usable)
[ 0.000000] BIOS-e820: 00000000bdcf4000 - 00000000bdef5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdef5000 - 00000000beec2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beec2000 - 00000000beec4000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000beec4000 - 00000000beec7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beec7000 - 00000000beeca000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000beeca000 - 00000000beecb000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beecb000 - 00000000beedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000beedf000 - 00000000beef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beef9000 - 00000000beeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000beeff000 - 00000000bef00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bef00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook3,1/Mac-F22788C8, BIOS MB31.88Z.008E.B02.0803051832 03/05/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 0BEF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbdcf4 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdcf4000
[ 0.000000] 0000000000 - 00bdc00000 page 2M
[ 0.000000] 00bdc00000 - 00bdcf4000 page 4k
[ 0.000000] kernel direct mapping tables up to bdcf4000 @ bdcef000-bdcf4000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13fffa000-140000000
[ 0.000000] RAMDISK: 37dda000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000beeee1c0 00084 (v01 APPLE Apple00 0000008E 01000013)
[ 0.000000] ACPI: FACP 00000000beeec000 000F4 (v03 APPLE Apple00 0000008E Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000beee1000 045B6 (v01 APPLE MacBook 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000beecb000 00040
[ 0.000000] ACPI: HPET 00000000beeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000beeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 00000000beee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000beee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000beee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000beee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000beec6000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000beec5000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000beec4000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000beee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000beedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bdcf4
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1039491
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 759084 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdcf4000 - 00000000bdef5000
[ 0.000000] PM: Registered nosave memory: 00000000bdef5000 - 00000000beec2000
[ 0.000000] PM: Registered nosave memory: 00000000beec2000 - 00000000beec4000
[ 0.000000] PM: Registered nosave memory: 00000000beec4000 - 00000000beec7000
[ 0.000000] PM: Registered nosave memory: 00000000beec7000 - 00000000beeca000
[ 0.000000] PM: Registered nosave memory: 00000000beeca000 - 00000000beecb000
[ 0.000000] PM: Registered nosave memory: 00000000beecb000 - 00000000beedf000
[ 0.000000] PM: Registered nosave memory: 00000000beedf000 - 00000000beef9000
[ 0.000000] PM: Registered nosave memory: 00000000beef9000 - 00000000beeff000
[ 0.000000] PM: Registered nosave memory: 00000000beeff000 - 00000000bef00000
[ 0.000000] PM: Registered nosave memory: 00000000bef00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u1048576
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021566
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro vga=792
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4022504k/5242880k available (4062k kernel code, 1084916k absent, 135460k reserved, 3306k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.720 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.33 BogoMIPS (lpj=7315733)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003459] Security Framework initialized
[ 0.003465] AppArmor: AppArmor disabled by boot time parameter
[ 0.004063] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007743] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008877] Mount-cache hash table entries: 256
[ 0.009329] Initializing cgroup subsys cpuacct
[ 0.009365] Initializing cgroup subsys memory
[ 0.009385] Initializing cgroup subsys devices
[ 0.009387] Initializing cgroup subsys freezer
[ 0.009389] Initializing cgroup subsys net_cls
[ 0.009391] Initializing cgroup subsys blkio
[ 0.009449] CPU: Physical Processor ID: 0
[ 0.009451] CPU: Processor Core ID: 0
[ 0.009453] mce: CPU supports 6 MCE banks
[ 0.009462] CPU0: Thermal monitoring enabled (TM2)
[ 0.009467] using mwait in idle threads.
[ 0.010648] ACPI: Core revision 20110413
[ 0.013943] ftrace: allocating 16144 entries in 64 pages
[ 0.017067] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050344] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.053330] PEBS disabled due to CPU errata.
[ 0.053330] ... version: 2
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.070108] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096673] Booting Node 0, Processors #1 Ok.
[ 0.096676] smpboot cpu 1: start_ip = 9a000
[ 0.193350] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199992] Brought up 2 CPUs
[ 0.199994] Total of 2 processors activated (8781.21 BogoMIPS).
[ 0.201409] devtmpfs: initialized
[ 0.201409] PM: Registering ACPI NVS region at bdcf4000 (2101248 bytes)
[ 0.201409] PM: Registering ACPI NVS region at beec2000 (8192 bytes)
[ 0.201409] PM: Registering ACPI NVS region at beec7000 (12288 bytes)
[ 0.201409] PM: Registering ACPI NVS region at beecb000 (81920 bytes)
[ 0.203521] print_constraints: dummy:
[ 0.203603] NET: Registered protocol family 16
[ 0.203715] ACPI: bus type pci registered
[ 0.203879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.203882] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.203887] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.221713] PCI: Using configuration type 1 for base access
[ 0.222146] bio: create slab <bio-0> at 0
[ 0.223437] ACPI: EC: EC description table is found, configuring boot EC
[ 0.224793] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.233606] ACPI: SSDT 00000000beec9a98 002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.233825] ACPI: Dynamic OEM Table Load:
[ 0.233828] ACPI: SSDT (null) 002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.233916] ACPI: SSDT 00000000beec7c98 00222 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.234123] ACPI: Dynamic OEM Table Load:
[ 0.234126] ACPI: SSDT (null) 00222 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.253500] ACPI: SSDT 00000000beec8f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.253713] ACPI: Dynamic OEM Table Load:
[ 0.253716] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.253793] ACPI: SSDT 00000000beec7f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.253999] ACPI: Dynamic OEM Table Load:
[ 0.254002] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.273456] ACPI: Interpreter enabled
[ 0.273459] ACPI: (supports S0 S3 S4 S5)
[ 0.273476] ACPI: Using IOAPIC for interrupt routing
[ 0.290124] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.290265] ACPI: No dock devices found.
[ 0.290267] HEST: Table not found.
[ 0.290269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290597] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.291109] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.291112] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.291114] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.291118] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.291130] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.291174] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.291188] pci 0000:00:02.0: reg 10: [mem 0xd0100000-0xd01fffff 64bit]
[ 0.291196] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.291203] pci 0000:00:02.0: reg 20: [io 0x3110-0x3117]
[ 0.291235] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.291246] pci 0000:00:02.1: reg 10: [mem 0xd0200000-0xd02fffff 64bit]
[ 0.291333] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.291391] pci 0000:00:1a.0: reg 20: [io 0x30c0-0x30df]
[ 0.291432] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.291489] pci 0000:00:1a.1: reg 20: [io 0x30a0-0x30bf]
[ 0.291547] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.291572] pci 0000:00:1a.7: reg 10: [mem 0xd0704c00-0xd0704fff]
[ 0.291663] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.291669] pci 0000:00:1a.7: PME# disabled
[ 0.291698] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.291721] pci 0000:00:1b.0: reg 10: [mem 0xd0700000-0xd0703fff 64bit]
[ 0.291806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.291811] pci 0000:00:1b.0: PME# disabled
[ 0.291840] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.291928] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.291933] pci 0000:00:1c.0: PME# disabled
[ 0.291968] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.292055] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.292060] pci 0000:00:1c.4: PME# disabled
[ 0.292092] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.292180] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.292184] pci 0000:00:1c.5: PME# disabled
[ 0.292215] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.292273] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.292313] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.292371] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.292411] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.292468] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.292524] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.292548] pci 0000:00:1d.7: reg 10: [mem 0xd0704800-0xd0704bff]
[ 0.292640] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.292645] pci 0000:00:1d.7: PME# disabled
[ 0.292669] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.292757] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.292876] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.292880] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.292886] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.292928] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.292945] pci 0000:00:1f.1: reg 10: [io 0x3108-0x310f]
[ 0.292957] pci 0000:00:1f.1: reg 14: [io 0x3124-0x3127]
[ 0.292970] pci 0000:00:1f.1: reg 18: [io 0x3100-0x3107]
[ 0.292982] pci 0000:00:1f.1: reg 1c: [io 0x3120-0x3123]
[ 0.292994] pci 0000:00:1f.1: reg 20: [io 0x30e0-0x30ef]
[ 0.293040] pci 0000:00:1f.2: [8086:2828] type 0 class 0x000101
[ 0.293062] pci 0000:00:1f.2: reg 10: [io 0x30f8-0x30ff]
[ 0.293074] pci 0000:00:1f.2: reg 14: [io 0x311c-0x311f]
[ 0.293086] pci 0000:00:1f.2: reg 18: [io 0x30f0-0x30f7]
[ 0.293099] pci 0000:00:1f.2: reg 1c: [io 0x3118-0x311b]
[ 0.293111] pci 0000:00:1f.2: reg 20: [io 0x3020-0x302f]
[ 0.293123] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
[ 0.293158] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.293163] pci 0000:00:1f.2: PME# disabled
[ 0.293179] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.293196] pci 0000:00:1f.3: reg 10: [mem 0xd0705000-0xd07050ff]
[ 0.293238] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.293345] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.293351] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.293356] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.293364] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.293455] pci 0000:02:00.0: [14e4:4328] type 0 class 0x000280
[ 0.293487] pci 0000:02:00.0: reg 10: [mem 0xd0500000-0xd0503fff 64bit]
[ 0.293512] pci 0000:02:00.0: reg 18: [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.293613] pci 0000:02:00.0: supports D1 D2
[ 0.293615] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.293621] pci 0000:02:00.0: PME# disabled
[ 0.300000] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.300005] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.300010] pci 0000:00:1c.4: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.300018] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.300223] pci 0000:03:00.0: [11ab:436a] type 0 class 0x000200
[ 0.300369] pci 0000:03:00.0: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
[ 0.300440] pci 0000:03:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.300761] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.301048] pci 0000:03:00.0: supports D1 D2
[ 0.301050] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.301071] pci 0000:03:00.0: PME# disabled
[ 0.301259] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.301264] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.301269] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.301278] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.301332] pci 0000:04:03.0: [11c1:5811] type 0 class 0x000c00
[ 0.301356] pci 0000:04:03.0: reg 10: [mem 0xd0300000-0xd0300fff]
[ 0.301447] pci 0000:04:03.0: supports D1 D2
[ 0.301449] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.301455] pci 0000:04:03.0: PME# disabled
[ 0.301516] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.301521] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.301526] pci 0000:00:1e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.301534] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.301537] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.301539] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.301542] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.301544] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.301573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.301689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.301727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.301783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.301921] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.302160] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.306138] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.306185] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.306229] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.306272] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.306316] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.306359] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.306404] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.306448] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.306536] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.306548] vgaarb: loaded
[ 0.306549] vgaarb: bridge control possible 0000:00:02.0
[ 0.306634] PCI: Using ACPI for IRQ routing
[ 0.309181] PCI: pci_cache_line_size set to 64 bytes
[ 0.309292] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.309294] reserve RAM buffer: 00000000bdcf4000 - 00000000bfffffff
[ 0.309423] NetLabel: Initializing
[ 0.309424] NetLabel: domain hash size = 128
[ 0.309426] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.309439] NetLabel: unlabeled traffic allowed by default
[ 0.309452] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.309457] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.309462] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.319996] Switching to clocksource hpet
[ 0.323172] Switched to NOHz mode on CPU #0
[ 0.323290] Switched to NOHz mode on CPU #1
[ 0.326697] pnp: PnP ACPI init
[ 0.326713] ACPI: bus type pnp registered
[ 0.327016] pnp 00:00: [bus 00-ff]
[ 0.327018] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.327021] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.327023] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.327025] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.327027] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.327029] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.327034] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.327036] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.327038] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.327040] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.327042] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.327044] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.327046] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.327048] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.327050] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.327052] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.327054] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.327056] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.327127] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.327200] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.327202] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.327204] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.327206] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.327208] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.327209] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.327211] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.327273] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.327276] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.327279] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.327281] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.327284] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.327287] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.327290] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.327293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327458] pnp 00:02: [io 0x0300-0x031f]
[ 0.327470] pnp 00:02: [irq 6]
[ 0.327509] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.327545] pnp 00:03: [io 0x0000-0x001f]
[ 0.327548] pnp 00:03: [io 0x0081-0x0091]
[ 0.327549] pnp 00:03: [io 0x0093-0x009f]
[ 0.327551] pnp 00:03: [io 0x00c0-0x00df]
[ 0.327553] pnp 00:03: [dma 4]
[ 0.327596] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.327605] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.327645] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.327705] pnp 00:05: [irq 0 disabled]
[ 0.327711] pnp 00:05: [irq 8]
[ 0.327713] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.327775] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.327779] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.327790] pnp 00:06: [io 0x00f0]
[ 0.327796] pnp 00:06: [irq 13]
[ 0.327839] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.327852] pnp 00:07: [io 0x002e-0x002f]
[ 0.327854] pnp 00:07: [io 0x004e-0x004f]
[ 0.327856] pnp 00:07: [io 0x0061]
[ 0.327858] pnp 00:07: [io 0x0063]
[ 0.327859] pnp 00:07: [io 0x0065]
[ 0.327861] pnp 00:07: [io 0x0067]
[ 0.327863] pnp 00:07: [io 0x0070]
[ 0.327864] pnp 00:07: [io 0x0080]
[ 0.327866] pnp 00:07: [io 0x0092]
[ 0.327867] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.327872] pnp 00:07: [io 0x0680-0x069f]
[ 0.327873] pnp 00:07: [io 0x0800-0x080f]
[ 0.327875] pnp 00:07: [io 0x0810-0x0817]
[ 0.327877] pnp 00:07: [io 0x0400-0x047f]
[ 0.327878] pnp 00:07: [io 0x0500-0x053f]
[ 0.327880] pnp 00:07: [io 0x1640-0x164f]
[ 0.327947] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.327950] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.327952] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.327955] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.327957] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.327960] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.327963] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327972] pnp 00:08: [io 0x0070-0x0077]
[ 0.328013] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.331790] pnp: PnP ACPI: found 9 devices
[ 0.331792] ACPI: ACPI bus type pnp unregistered
[ 0.337999] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.338005] PCI: max bus depth: 1 pci_try_num: 2
[ 0.338055] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0800000-0xd08fffff pref]
[ 0.338059] pci 0000:00:1c.4: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.338064] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.338068] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.338070] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.338074] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.338081] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.338086] pci 0000:00:1c.0: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.338094] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.338098] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
[ 0.338104] pci 0000:00:1c.4: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.338109] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.338118] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0800000-0xd081ffff pref]
[ 0.338121] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.338124] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.338130] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.338136] pci 0000:00:1c.5: bridge window [mem 0xd0800000-0xd09fffff pref]
[ 0.338144] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.338146] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.338152] pci 0000:00:1e.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.338157] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.338170] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.338179] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.338186] pci 0000:00:1c.0: setting latency timer to 64
[ 0.338194] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.338199] pci 0000:00:1c.4: setting latency timer to 64
[ 0.338209] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.338213] pci 0000:00:1c.5: setting latency timer to 64
[ 0.338237] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.338241] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.338247] pci 0000:00:1e.0: setting latency timer to 64
[ 0.338252] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.338254] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.338256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.338259] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.338261] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
[ 0.338263] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[ 0.338266] pci_bus 0000:01: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref]
[ 0.338268] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.338270] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.338273] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.338275] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.338277] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.338279] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff pref]
[ 0.338282] pci_bus 0000:04: resource 1 [mem 0xd0300000-0xd03fffff]
[ 0.338284] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.338286] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.338288] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.338291] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.338369] NET: Registered protocol family 2
[ 0.338560] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.339792] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.344198] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.344770] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.344773] TCP reno registered
[ 0.344784] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.344830] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.345138] NET: Registered protocol family 1
[ 0.345160] pci 0000:00:02.0: Boot video device
[ 0.345360] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.345420] Unpacking initramfs...
[ 0.376695] Freeing initrd memory: 2136k freed
[ 0.377441] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.377444] Placing 64MB software IO TLB between ffff8800b9cef000 - ffff8800bdcef000
[ 0.377447] software IO TLB at phys 0xb9cef000 - 0xbdcef000
[ 0.377889] audit: initializing netlink socket (disabled)
[ 0.377903] type=2000 audit(1313142520.376:1): initialized
[ 0.390496] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.415268] VFS: Disk quotas dquot_6.5.2
[ 0.415416] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.415585] msgmni has been set to 7860
[ 0.415821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.415861] io scheduler noop registered
[ 0.415863] io scheduler deadline registered
[ 0.415913] io scheduler cfq registered (default)
[ 0.416044] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.416103] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.416224] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.416278] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.416392] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.416446] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.416580] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.416586] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.416607] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.416609] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.416614] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.416635] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.416638] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.416643] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.416724] vesafb: mode is 1024x768x32, linelength=4096, pages=4
[ 0.416726] vesafb: scrolling: redraw
[ 0.416729] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.418633] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90005100000, using 6144k, total 15808k
[ 0.442605] Console: switching to colour frame buffer device 128x48
[ 0.466512] fb0: VESA VGA frame buffer device
[ 0.466523] efifb: dmi detected MacBook3,1 - framebuffer at 0xc0000000 (1024x768, stride 4096)
[ 0.466526] intel_idle: MWAIT substates: 0x22220
[ 0.466528] intel_idle: does not run on family 6 model 15
[ 0.466532] ERST: Table is not found!
[ 0.466583] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.626975] Linux agpgart interface v0.103
[ 0.627067] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.627927] i8042: No controller found
[ 0.628152] mousedev: PS/2 mouse device common for all mice
[ 0.628204] rtc_cmos 00:08: RTC can wake from S4
[ 0.628322] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.628355] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.628364] cpuidle: using governor ladder
[ 0.628366] cpuidle: using governor menu
[ 0.628581] TCP cubic registered
[ 0.628584] NET: Registered protocol family 17
[ 0.628592] Registering the dns_resolver key type
[ 0.628690] PM: Hibernation image not present or could not be loaded.
[ 0.628695] registered taskstats version 1
[ 0.640798] rtc_cmos 00:08: setting system clock to 2011-08-12 09:48:41 UTC (1313142521)
[ 0.640858] Initializing network drop monitor service
[ 0.642205] Freeing unused kernel memory: 712k freed
[ 0.642392] Write protecting the kernel read-only data: 6144k
[ 0.642535] Freeing unused kernel memory: 16k freed
[ 0.645230] Freeing unused kernel memory: 776k freed
[ 0.658238] udevd[58]: starting version 173
[ 0.716103] usbcore: registered new interface driver usbfs
[ 0.716129] usbcore: registered new interface driver hub
[ 0.719747] usbcore: registered new device driver usb
[ 0.729097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.729139] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.729173] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.729178] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.729232] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.729276] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.735097] SCSI subsystem initialized
[ 0.736705] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.736728] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd0704c00
[ 0.746943] libata version 3.00 loaded.
[ 0.756696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.756891] hub 1-0:1.0: USB hub found
[ 0.756896] hub 1-0:1.0: 4 ports detected
[ 0.756995] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 0.757033] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.757037] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.757046] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.757081] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.760960] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.760980] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0704800
[ 0.773352] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.773457] hub 2-0:1.0: USB hub found
[ 0.773460] hub 2-0:1.0: 6 ports detected
[ 0.773539] ata_piix 0000:00:1f.1: version 2.13
[ 0.773552] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.773556] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.773562] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.773606] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.773940] scsi0 : ata_piix
[ 0.774208] scsi1 : ata_piix
[ 0.774534] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30e0 irq 14
[ 0.774537] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30e8 irq 15
[ 0.774563] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.774569] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 0.774604] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.774964] scsi2 : ata_piix
[ 0.775043] scsi3 : ata_piix
[ 0.775471] ata3: SATA max UDMA/133 cmd 0x30f8 ctl 0x311c bmdma 0x3020 irq 18
[ 0.775474] ata4: SATA max UDMA/133 cmd 0x30f0 ctl 0x3118 bmdma 0x3028 irq 18
[ 0.850500] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.850552] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.850561] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.850565] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.850576] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.850611] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000030c0
[ 0.850754] hub 3-0:1.0: USB hub found
[ 0.850759] hub 3-0:1.0: 2 ports detected
[ 0.850830] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.850836] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.850840] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.850847] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.850888] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000030a0
[ 0.851010] hub 4-0:1.0: USB hub found
[ 0.851014] hub 4-0:1.0: 2 ports detected
[ 0.851082] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.851089] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.851092] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.851100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.851129] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 0.851253] hub 5-0:1.0: USB hub found
[ 0.851257] hub 5-0:1.0: 2 ports detected
[ 0.851324] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.851333] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.851336] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.851344] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.851372] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[ 0.851489] hub 6-0:1.0: USB hub found
[ 0.851493] hub 6-0:1.0: 2 ports detected
[ 0.851570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.851577] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.851580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.851587] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.851617] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003040
[ 0.851743] hub 7-0:1.0: USB hub found
[ 0.851747] hub 7-0:1.0: 2 ports detected
[ 0.943701] ata1.00: ATAPI: HL-DT-ST DVDRW GSA-S10N, BP10, max UDMA/33
[ 0.953499] ata3.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 0.953503] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.956899] ata1.00: configured for UDMA/33
[ 0.963746] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GSA-S10N BP10 PQ: 0 ANSI: 5
[ 0.966835] ata3.00: configured for UDMA/133
[ 0.966972] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 0.972667] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.972735] sd 2:0:0:0: [sda] Write Protect is off
[ 0.972738] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.972759] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.973211] sda: sda1 sda2 sda3
[ 0.973606] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.976798] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 0.976802] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.977010] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.099025] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.280021] usb 2-4: new high speed USB device number 2 using ehci_hcd
[ 1.380021] Refined TSC clocksource calibration: 2194.499 MHz.
[ 1.380028] Switching to clocksource tsc
[ 1.411198] udevd[265]: starting version 173
[ 1.434648] lib80211: common routines for IEEE802.11 drivers
[ 1.434651] lib80211_crypt: registered algorithm 'NULL'
[ 1.472295] wl: module license 'Mixed/Proprietary' taints kernel.
[ 1.472299] Disabling lock debugging due to kernel taint
[ 1.481991] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.482001] wl 0000:02:00.0: setting latency timer to 64
[ 1.503073] lib80211_crypt: registered algorithm 'TKIP'
[ 1.503307] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.38
[ 1.507425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input0
[ 1.507434] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.508556] ACPI: acpi_idle registered with cpuidle
[ 1.510824] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.511551] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.511831] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.513139] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 1.513262] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.513540] ACPI: Lid Switch [LID0]
[ 1.513596] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.513603] ACPI: Power Button [PWRB]
[ 1.513648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.513652] ACPI: Sleep Button [SLPB]
[ 1.517729] Monitor-Mwait will be used to enter C-1 state
[ 1.518328] Monitor-Mwait will be used to enter C-2 state
[ 1.519498] Monitor-Mwait will be used to enter C-3 state
[ 1.519512] Marking TSC unstable due to TSC halts in idle
[ 1.519804] Switching to clocksource hpet
[ 1.521085] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1.531306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.531316] ACPI: Power Button [PWRF]
[ 1.548839] sky2: driver version 1.28
[ 1.548913] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.548950] sky2 0000:03:00.0: setting latency timer to 64
[ 1.549045] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.549646] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.558328] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.560398] iTCO_vendor_support: vendor-support=0
[ 1.566146] sky2 0000:03:00.0: eth1: addr 00:1b:63:b3:a4:b8
[ 1.569073] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.609097] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.609187] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.793441] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 2.193439] usb 3-2: new full speed USB device number 3 using uhci_hcd
[ 2.580132] usb 7-1: new low speed USB device number 2 using uhci_hcd
[ 2.990108] usb 7-2: new full speed USB device number 3 using uhci_hcd
[ 3.208685] appletouch: Geyser mode initialized.
[ 3.208752] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input6
[ 3.208852] usbcore: registered new interface driver appletouch
[ 3.210675] generic-usb: probe of 0003:05AC:1000.0001 failed with error -71
[ 3.215683] generic-usb: probe of 0003:05AC:1000.0002 failed with error -71
[ 3.219033] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input7
[ 3.219117] generic-usb 0003:045E:0745.0003: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1a.0-2/input0
[ 3.226449] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input8
[ 3.226561] generic-usb 0003:045E:0745.0004: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1a.0-2/input1
[ 3.251968] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/input/input9
[ 3.252095] generic-usb 0003:045E:0745.0005: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1a.0-2/input2
[ 3.252280] usbcore: registered new interface driver usbhid
[ 3.252282] usbhid: USB HID core driver
[ 3.274808] apple 0003:05AC:8242.0006: hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 3.279044] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input10
[ 3.279139] apple 0003:05AC:022A.0007: input,hidraw4: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 3.282057] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input11
[ 3.282241] apple 0003:05AC:022A.0008: input,hidraw5: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 3.463502] usb 3-1: USB disconnect, device number 2
[ 3.690127] usb 3-1: new full speed USB device number 4 using uhci_hcd
[ 3.894146] Bluetooth: Core ver 2.16
[ 3.894163] NET: Registered protocol family 31
[ 3.894165] Bluetooth: HCI device and connection manager initialized
[ 3.894168] Bluetooth: HCI socket layer initialized
[ 3.894169] Bluetooth: L2CAP socket layer initialized
[ 3.894210] Bluetooth: SCO socket layer initialized
[ 3.901731] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.901952] usbcore: registered new interface driver btusb
[ 4.376895] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.376909] ACPI: Battery Slot [BAT0] (battery present)
[ 4.377037] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.377080] ACPI: AC Adapter [ADP1] (on-line)
[ 4.382347] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.382467] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 4.382548] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.393881] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.400932] [drm] Initialized drm 1.1.0 20060810
[ 4.424751] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.424837] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.424869] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.446837] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 4.470306] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 4.470379] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 4.472633] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.472639] i915 0000:00:02.0: setting latency timer to 64
[ 4.503234] applesmc: : read arg fail
[ 4.569915] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 4.569922] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.569923] [drm] Driver supports precise vblank timestamp query.
[ 4.570074] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.649364] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
[ 4.649367] applesmc: init_smcreg() took 50 ms
[ 4.669988] input: applesmc as /devices/platform/applesmc.768/input/input13
[ 4.946829] firewire_core: created device fw0: GUID 001e52fffe3db702, S400
[ 5.024385] [drm] initialized overlay support
[ 5.187009] checking generic (c0000000 f70000) vs hw (c0000000 10000000)
[ 5.187013] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 5.187041] Console: switching to colour dummy device 80x25
[ 5.188196] fbcon: inteldrmfb (fb0) is primary device
[ 5.240940] Console: switching to colour frame buffer device 160x50
[ 5.243719] fb0: inteldrmfb frame buffer device
[ 5.243720] drm: registered panic notifier
[ 5.243775] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.312005] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 5.724183] Adding 498008k swap on /dev/sda2. Priority:-1 extents:1 across:498008k SS
[ 6.498209] sky2 0000:03:00.0: eth1: enabling interface
[ 8.053393] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[ 8.054149] render error detected, EIR: 0x00000010
[ 8.054153] page table error
[ 8.054156] PGTBL_ER: 0x00000100
[ 8.054161] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[ 8.220394] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 8.262010] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 8.262423] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 8.262474] ehci_hcd 0000:00:1a.7: PME# enabled
[ 8.276340] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 8.277099] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 8.420042] ehci_hcd 0000:00:1a.7: BAR 0: set to [mem 0xd0704c00-0xd0704fff] (PCI address [0xd0704c00-0xd0704fff])
[ 8.420059] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x309)
[ 8.420084] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 8.420118] ehci_hcd 0000:00:1a.7: PME# disabled
[ 8.420129] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 8.420137] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 8.493154] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 8.493172] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 8.532482] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.532500] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.572522] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 8.572539] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 14.683472] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 16.572315] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 979.720038] usb 2-1: new high speed USB device number 5 using ehci_hcd
[ 982.487914] Initializing USB Mass Storage driver...
[ 982.488148] scsi4 : usb-storage 2-1:1.0
[ 982.488442] usbcore: registered new interface driver usb-storage
[ 982.488445] USB Mass Storage support registered.
[ 982.491644] usbcore: registered new interface driver uas
[ 983.493281] scsi 4:0:0:0: Direct-Access SAMSUNG HN-M750MBB 2AR1 PQ: 0 ANSI: 0
[ 983.493519] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 983.494076] sd 4:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 983.495955] sd 4:0:0:0: [sdb] Write Protect is off
[ 983.495959] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 983.496700] sd 4:0:0:0: [sdb] No Caching mode page present
[ 983.496704] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 983.498954] sd 4:0:0:0: [sdb] No Caching mode page present
[ 983.498959] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 983.534747] sdb: sdb1
[ 983.537333] sd 4:0:0:0: [sdb] No Caching mode page present
[ 983.537337] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 983.537340] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 990.256323] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4584.835642] EXT4-fs (sda3): re-mounted. Opts: commit=360
[ 4584.852540] EXT4-fs (sdb1): re-mounted. Opts: commit=360
[ 4585.268810] EXT4-fs (sda3): re-mounted. Opts: commit=360
[ 4585.282222] EXT4-fs (sdb1): re-mounted. Opts: commit=360
[ 4608.707550] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4608.710916] EXT4-fs (sdb1): re-mounted. Opts: commit=360,commit=0
[ 4608.947828] PM: Syncing filesystems ... done.
[ 4608.951429] PM: Preparing system for mem sleep
[ 4609.886610] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 4609.899703] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 4609.912998] PM: Entering mem sleep
[ 4609.913264] Suspending console(s) (use no_console_suspend to debug)
[ 4609.914569] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 4609.914685] sd 2:0:0:0: [sda] Stopping disk
[ 4609.921725] wl 0000:02:00.0: PCI INT A disabled
[ 4609.921939] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 4609.922032] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
[ 4609.922145] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 4609.922167] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 4609.922888] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 4609.932941] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 4609.936266] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 4609.936284] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 4609.939575] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 4609.943244] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 4610.022994] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 4610.036269] PM: suspend of devices complete after 122.339 msecs
[ 4610.216370] PM: late suspend of devices complete after 180.094 msecs
[ 4610.216798] ACPI: Preparing to enter system sleep state S3
[ 4610.262968] PM: Saving platform NVS memory
[ 4610.270101] Disabling non-boot CPUs ...
[ 4610.372915] CPU 1 is now offline
[ 4610.373400] Extended CMOS year: 2000
[ 4610.373400] ACPI: Low-level resume complete
[ 4610.373400] PM: Restoring platform NVS memory
[ 4610.373400] Extended CMOS year: 2000
[ 4610.373400] Enabling non-boot CPUs ...
[ 4610.380241] Booting Node 0 Processor 1 APIC 0x1
[ 4610.380243] smpboot cpu 1: start_ip = 9a000
[ 4610.473243] NMI watchdog enabled, takes one hw-pmu counter.
[ 4610.476222] Switched to NOHz mode on CPU #1
[ 4610.479601] CPU1 is up
[ 4610.481761] ACPI: Waking up from system sleep state S3
[ 4610.752989] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4610.752997] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x3111)
[ 4610.753001] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[ 4610.753007] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 4610.753030] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xd0200004)
[ 4610.753035] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 4610.753046] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 4610.753060] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x30c1)
[ 4610.753074] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 4610.753086] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 4610.753101] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x30a1)
[ 4610.753114] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 4610.753135] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x309)
[ 4610.753155] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0704c00)
[ 4610.753163] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 4610.753195] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 4610.753215] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0700004)
[ 4610.753221] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[ 4610.753227] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100002)
[ 4610.753261] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[ 4610.753273] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd0b1d0a1)
[ 4610.753279] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd060d060)
[ 4610.753284] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x6060)
[ 4610.753289] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[ 4610.753298] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[ 4610.753304] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4610.753357] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[ 4610.753369] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd001d001)
[ 4610.753375] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050)
[ 4610.753380] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[ 4610.753385] pcieport 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[ 4610.753394] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[ 4610.753401] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4610.753452] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[ 4610.753465] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xd091d081)
[ 4610.753470] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xd040d040)
[ 4610.753475] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
[ 4610.753480] pcieport 0000:00:1c.5: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
[ 4610.753488] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[ 4610.753495] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4610.753535] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4610.753549] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3081)
[ 4610.753563] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 4610.753575] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 4610.753589] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x3061)
[ 4610.753603] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 4610.753614] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309)
[ 4610.753628] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x3041)
[ 4610.753643] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 4610.753663] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[ 4610.753683] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0704800)
[ 4610.753691] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 4610.753709] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 4610.753711] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 4610.753721] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[ 4610.753733] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 4610.753738] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd030d030)
[ 4610.753744] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 4610.753749] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x0, writing 0x20040400)
[ 4610.753760] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 4610.753832] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 4610.753835] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 4610.753860] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005)
[ 4610.753898] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[ 4610.753914] i801_smbus 0000:00:1f.3: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 4610.753934] i801_smbus 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xd0705000)
[ 4610.753942] i801_smbus 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
[ 4610.753981] wl 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 4610.754004] wl 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd000000c)
[ 4610.754013] wl 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004)
[ 4610.754020] wl 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[ 4610.754028] wl 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 4610.754229] sky2 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 4610.754281] sky2 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000)
[ 4610.754382] sky2 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)
[ 4610.754434] sky2 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0400004)
[ 4610.754461] sky2 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[ 4610.754505] sky2 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4610.754813] firewire_ohci 0000:04:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0300000)
[ 4610.754819] firewire_ohci 0000:04:03.0: restoring config space at offset 0x3 (was 0x0, writing 0xf810)
[ 4610.754826] firewire_ohci 0000:04:03.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900216)
[ 4610.755097] PM: early resume of devices complete after 2.189 msecs
[ 4610.755413] i915 0000:00:02.0: setting latency timer to 64
[ 4610.755888] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4610.757230] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4610.759539] usb usb3: root hub lost power or was reset
[ 4610.759566] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 4610.759574] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 4610.759576] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4610.759582] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4610.759639] usb usb4: root hub lost power or was reset
[ 4610.760030] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4610.760037] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4610.760083] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4610.760145] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4610.760153] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4610.760155] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4610.760162] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4610.760187] usb usb5: root hub lost power or was reset
[ 4610.760197] usb usb6: root hub lost power or was reset
[ 4610.760201] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 4610.760211] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4610.760213] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 4610.760223] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4610.760239] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 4610.760241] usb usb7: root hub lost power or was reset
[ 4610.760243] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 4610.760253] pci 0000:00:1e.0: setting latency timer to 64
[ 4610.760255] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 4610.760258] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 4610.760273] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 4610.763315] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4610.763320] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4610.763377] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 4610.763384] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4610.763389] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4610.763432] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4610.763478] wl 0000:02:00.0: setting latency timer to 64
[ 4610.764610] sd 2:0:0:0: [sda] Starting disk
[ 4610.816383] firewire_core: skipped bus generations, destroying all nodes
[ 4611.033359] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 4611.033362] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 4611.046545] ata1.00: configured for UDMA/33
[ 4611.089639] usb 7-2: reset full speed USB device number 3 using uhci_hcd
[ 4611.242565] appletouch: Geyser mode initialized.
[ 4611.316304] firewire_core: rediscovered device fw0
[ 4611.389778] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 4611.389784] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 4611.463182] ata3.00: configured for UDMA/133
[ 4611.476315] usb 7-1: reset low speed USB device number 2 using uhci_hcd
[ 4611.863012] usb 3-2: reset full speed USB device number 3 using uhci_hcd
[ 4612.099621] usb 3-1: reset full speed USB device number 4 using uhci_hcd
[ 4613.659895] Extended CMOS year: 2000
[ 4613.660479] PM: resume of devices complete after 2905.094 msecs
[ 4613.660773] PM: Finishing wakeup.
[ 4613.660774] Restarting tasks ... done.
[ 4613.676356] video LNXVIDEO:00: Restoring backlight state
[ 4613.729700] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4613.729704] ata3.00: BMDMA stat 0x6
[ 4613.729707] ata3.00: failed command: READ DMA
[ 4613.729713] ata3.00: cmd c8/00:10:fa:5a:16/00:00:00:00:00/ec tag 0 dma 8192 in
[ 4613.729714] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 4613.729717] ata3.00: status: { DRDY ERR }
[ 4613.729719] ata3.00: error: { ICRC ABRT }
[ 4613.729731] ata3: soft resetting link
[ 4613.889666] usb 3-1: USB disconnect, device number 4
[ 4613.983218] ata3.00: configured for UDMA/133
[ 4613.983240] ata3: EH complete
[ 4614.116241] usb 3-1: new full speed USB device number 5 using uhci_hcd
[ 4614.291559] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 4614.308154] EXT4-fs (sdb1): re-mounted. Opts: commit=360,commit=0,commit=0
[ 4614.310608] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input14
[ 4614.310748] generic-usb 0003:05AC:1000.0009: input,hidraw6: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
[ 4614.342615] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input15
[ 4614.342792] generic-usb 0003:05AC:1000.000A: input,hidraw7: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1
[ 4614.502427] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4614.502432] ata3.00: BMDMA stat 0x6
[ 4614.502436] ata3.00: failed command: READ DMA
[ 4614.502441] ata3.00: cmd c8/00:58:5a:61:16/00:00:00:00:00/ec tag 0 dma 45056 in
[ 4614.502442] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 4614.502445] ata3.00: status: { DRDY ERR }
[ 4614.502447] ata3.00: error: { ICRC ABRT }
[ 4614.502460] ata3: soft resetting link
[ 4614.632950] usb 3-1: USB disconnect, device number 5
[ 4614.746420] ata3.00: configured for UDMA/133
[ 4614.746476] ata3: EH complete
[ 4614.818873] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 4614.818879] ata3.00: BMDMA stat 0x6
[ 4614.818885] ata3.00: failed command: READ DMA
[ 4614.818895] ata3.00: cmd c8/00:10:02:25:16/00:00:00:00:00/e5 tag 0 dma 8192 in
[ 4614.818897] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 4614.818902] ata3.00: status: { DRDY ERR }
[ 4614.818906] ata3.00: error: { ICRC ABRT }
[ 4614.818921] ata3: soft resetting link
[ 4614.912979] usb 3-1: new full speed USB device number 6 using uhci_hcd
[ 4615.063085] ata3.00: configured for UDMA/133
[ 4615.063104] ata3: EH complete
[ 4615.528020] EXT4-fs (sda3): re-mounted. Opts: commit=360
[ 4615.545594] EXT4-fs (sdb1): re-mounted. Opts: commit=0,commit=360Der Fehler tritt nur auf wenn ich das Macbook vorher auch zum schlafen geschickt habe.
Ich habe auch mal einen Bugreport auf dem Kernel Bugzilla aufgemacht. (https://bugzilla.kernel.org/show_bug.cgi?id=41022)
Habt ihr evtl. eine Idee?
