Fehler gefnden nur wie beheben???

E

Erdmaenchen

Mitglied
Hallo,
ich habe ein Suse Linux 10 und meine W-Lan karte isntalliert. Nach einigen versuchen hat sich herausgestellt was der Fehler ist.
Nur eine lösung konnte mir keiner sagen nur sagen das ich googlen sollte.

Da ich echt kp habe was ich da googlen könne hoffe ich das einer von euch mir sagen kann wonach ich googlen soll oder gar eine lösung hat

hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request failed) hfa384x_drvr_start: cmd_initialize() failed, result=-5 prism2sta_ifstate: hfa384x_drvr_start()

Danke

Simon

P.S.
hier die komplette datei
http://www.phpfi.com/102043
 
Danke habe ein bissel gegogelt nun eigentlich müsste es jetzt gehen nur ich habe einen neuen Fehler

Er erkennt meine Wlan un. Wenn ich sie abziehe dann erkennt er auch das keine da ist.


Nun kommt dies wenn ich modeprobe mache.

linux:~ # modprobe prism2_usb
FATAL: Error inserting prism2_usb (/lib/modules/2.6.13-15-default/linux-wlan-ng/prism2_usb.ko): Unknown symbol in module, or unknown parameter (see dmesg)
linux:~ #

Was soll ich jetzt machen. Google hat mich leider nciht weiter gebracht. Wäre nett wenn mir einer noch mal helfen könnte

MFG
Erdmaenchen
 
Den output von dmesg posten wäre keine schlechte Idee.
 
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fbc70
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fab70
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x0fff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x0fff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x0fff00c0
ACPI: DSDT (v001 SiS 746 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: local apic disabled
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: SiS Product ID: 746 APIC at: 0xFEE00000
Processor #0 6:6 APIC version 0
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
Built 1 zonelists
Kernel command line: root=/dev/hdc2 vga=0x31a selinux=0 resume=/dev/hdc1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1466.762 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 253904k/262080k available (2028k kernel code, 7560k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2935.36 BogoMIPS (lpj=5870728)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1746k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0c28)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to ********** cc **********)
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: cdd00000-cfefffff
PREFETCH window: bda00000-cdbfffff
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1126891373.564:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xc0000000, mapped to 0xd0880000, using 10240k, total 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=0
vesafb: protected mode interface info at c000:0ac9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PS2M PS2K UAR1 USB1 USB2 EHCI LAN MDM
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
logips2pp: Detected unknown logitech mouse model 66
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
hda: LTN485, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST340823A, ATA DISK drive
hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 78165360 sectors (40020 MB) w/1024KiB Cache, CHS=65535/16/63, UDMA(100)
hdc: cache flushes not supported
hdc: hdc1 hdc2
ACPI: CPU0 (power states: C1[C1])
hda: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: hdc2: found reiserfs format "3.6" with standard journal
ReiserFS: hdc2: using ordered data mode
ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdc2: checking transaction log (hdc2)
ReiserFS: hdc2: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 512024k swap on /dev/hdc1. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: **********
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 746 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
usbcore: registered new driver usbfs
usbcore: registered new driver hub
i2c-sis96x version 1.0.0
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ip_tables: (C) 2000-2002 Netfilter core team
intel8x0_measure_ac97_clock: measured 55480 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 11, io mem 0xcfffd000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.1 -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 3, io mem 0xcfffe000
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 248 bytes per conntrack
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: config 1 has an invalid interface number: 1 but max is 0
usb 2-1: config 1 has no interface number 0
sis900.c: v1.08.08 Jan. 22 2005
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:0b:6a:56:07:08.
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.2: irq 5, io mem 0xcffff000
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
usb 2-1: new full speed USB device using ohci_hcd and address 3
usb 2-1: config 1 has an invalid interface number: 1 but max is 0
usb 2-1: config 1 has no interface number 0
p80211: module not supported by Novell, setting U taint flag.
prism2_usb: module not supported by Novell, setting U taint flag.
prism2_usb: no version for "p80211netdev_rx" found: kernel tainted.
prism2usb_init: prism2_usb.o: 0.2.2 Loaded
prism2usb_init: dev_info is: prism2_usb
usbcore: registered new driver prism2_usb
bootsplash: status on console 0 changed to on
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
powernow-k8: Processor cpuid 662 not supported
subfs 0.9
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
bootsplash: status on console 0 changed to on
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
bootsplash: status on console 0 changed to on
hfa384x_usbctlx_complete_sync: CTLX[1] error: state(Request failed)
hfa384x_drvr_start: cmd_initialize() failed, result=-5
prism2sta_ifstate: hfa384x_drvr_start() failed,result=-5
usb 2-3: new full speed USB device using ohci_hcd and address 4
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: AVIXE Model: Flash Disk Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete
SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
sda: Write Protect is off
sda: Mode Sense: 00 4e 70 00
sda: assuming drive cache: write through
SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
sda: Write Protect is off
sda: Mode Sense: 00 4e 70 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
eth0: Media Link Off
eth0: no IPv6 routers present
usbcore: deregistering driver prism2_usb
prism2_usb.o: 0.2.2 Unloaded
p80211.o: 0.2.2 Unloaded
usb 2-1: USB disconnect, address 3
eth0: Media Link Off
eth0: no IPv6 routers present
usb 2-1: new full speed USB device using ohci_hcd and address 5
usb 2-1: config 1 has an invalid interface number: 1 but max is 0
usb 2-1: config 1 has no interface number 0
p80211: module not supported by Novell, setting U taint flag.
prism2_usb: module not supported by Novell, setting U taint flag.
prism2_usb: disagrees about version of symbol p80211netdev_rx
prism2_usb: Unknown symbol p80211netdev_rx
prism2_usb: disagrees about version of symbol register_wlandev
prism2_usb: Unknown symbol register_wlandev
prism2_usb: disagrees about version of symbol wlan_unsetup
prism2_usb: Unknown symbol wlan_unsetup
prism2_usb: disagrees about version of symbol unregister_wlandev
prism2_usb: Unknown symbol unregister_wlandev
prism2_usb: disagrees about version of symbol p80211netdev_hwremoved
prism2_usb: Unknown symbol p80211netdev_hwremoved
prism2_usb: disagrees about version of symbol wlan_setup
prism2_usb: Unknown symbol wlan_setup
prism2_usb: disagrees about version of symbol p80211skb_rxmeta_attach
prism2_usb: Unknown symbol p80211skb_rxmeta_attach
prism2_usb: module not supported by Novell, setting U taint flag.
prism2_usb: disagrees about version of symbol p80211netdev_rx
prism2_usb: Unknown symbol p80211netdev_rx
prism2_usb: disagrees about version of symbol register_wlandev
prism2_usb: Unknown symbol register_wlandev
prism2_usb: disagrees about version of symbol wlan_unsetup
prism2_usb: Unknown symbol wlan_unsetup
prism2_usb: disagrees about version of symbol unregister_wlandev
prism2_usb: Unknown symbol unregister_wlandev
prism2_usb: disagrees about version of symbol p80211netdev_hwremoved
prism2_usb: Unknown symbol p80211netdev_hwremoved
prism2_usb: disagrees about version of symbol wlan_setup
prism2_usb: Unknown symbol wlan_setup
prism2_usb: disagrees about version of symbol p80211skb_rxmeta_attach
prism2_usb: Unknown symbol p80211skb_rxmeta_attach
prism2_usb: module not supported by Novell, setting U taint flag.
prism2_usb: disagrees about version of symbol p80211netdev_rx
prism2_usb: Unknown symbol p80211netdev_rx
prism2_usb: disagrees about version of symbol register_wlandev
prism2_usb: Unknown symbol register_wlandev
prism2_usb: disagrees about version of symbol wlan_unsetup
prism2_usb: Unknown symbol wlan_unsetup
prism2_usb: disagrees about version of symbol unregister_wlandev
prism2_usb: Unknown symbol unregister_wlandev
prism2_usb: disagrees about version of symbol p80211netdev_hwremoved
prism2_usb: Unknown symbol p80211netdev_hwremoved
prism2_usb: disagrees about version of symbol wlan_setup
prism2_usb: Unknown symbol wlan_setup
prism2_usb: disagrees about version of symbol p80211skb_rxmeta_attach
prism2_usb: Unknown symbol p80211skb_rxmeta_attach
p80211.o: 0.2.2 Unloaded
p80211: module not supported by Novell, setting U taint flag.
prism2_usb: module not supported by Novell, setting U taint flag.
prism2_usb: disagrees about version of symbol p80211netdev_rx
prism2_usb: Unknown symbol p80211netdev_rx
prism2_usb: disagrees about version of symbol register_wlandev
prism2_usb: Unknown symbol register_wlandev
prism2_usb: disagrees about version of symbol wlan_unsetup
prism2_usb: Unknown symbol wlan_unsetup
prism2_usb: disagrees about version of symbol unregister_wlandev
prism2_usb: Unknown symbol unregister_wlandev
prism2_usb: disagrees about version of symbol p80211netdev_hwremoved
prism2_usb: Unknown symbol p80211netdev_hwremoved
prism2_usb: disagrees about version of symbol wlan_setup
prism2_usb: Unknown symbol wlan_setup
prism2_usb: disagrees about version of symbol p80211skb_rxmeta_attach
prism2_usb: Unknown symbol p80211skb_rxmeta_attach
prism2_usb: module not supported by Novell, setting U taint flag.
prism2_usb: disagrees about version of symbol p80211netdev_rx
prism2_usb: Unknown symbol p80211netdev_rx
prism2_usb: disagrees about version of symbol register_wlandev
prism2_usb: Unknown symbol register_wlandev
prism2_usb: disagrees about version of symbol wlan_unsetup
prism2_usb: Unknown symbol wlan_unsetup
prism2_usb: disagrees about version of symbol unregister_wlandev
prism2_usb: Unknown symbol unregister_wlandev
prism2_usb: disagrees about version of symbol p80211netdev_hwremoved
prism2_usb: Unknown symbol p80211netdev_hwremoved
prism2_usb: disagrees about version of symbol wlan_setup
prism2_usb: Unknown symbol wlan_setup
prism2_usb: disagrees about version of symbol p80211skb_rxmeta_attach
prism2_usb: Unknown symbol p80211skb_rxmeta_attach


Sorry habe ich vergessen
 
Sieht so aus, als wuerden die Probleme beim p80211-Modul liegen. Evtl. das vorher mal per Hand laden. Kann es sein, dass du gerade den Stick an einen USB1-Anschluss haengen willst? Nen aehnliches Problem hatte ich auch. Erledigte sich sofort, als ich nen USB2-Anschluss nutzte.
 
Om eigentlich ist es USB 2.o na a hab aber nichts nachinstalliert nur standart. Werde das mal abchecken. danke für den Tip
 
tach

Wir sollten erstmal ueberpruefen, ob und wie die Symbole bereitgestellt sind.
Gib dazu mal folgendes in einer Kommandozeile ein:
Code: 
for i in `dmesg | grep 'Unknown symbol' | tr ' ' '+'` ; do myvar=${i##*+} ; grep ${myvar} /proc/kallsyms ; done

greetz by
Marco

(Erklaehrung falls Bedarf)
 
Hallo,
sorry das ich so spät antworte war übers we weggefahren.
Ich hab es mal gemacht und dann kam


Password:
linux:~ # for i in `dmesg | grep 'Unknown symbol' | tr ' ' '+'` ; do myvar=${i##*+} ; grep ${myvar} /proc/kallsyms ; done
d1735f70 r __kcrctab_p80211netdev_rx [p80211]
d1735fc8 r __kstrtab_p80211netdev_rx [p80211]
d1736060 r __ksymtab_p80211netdev_rx [p80211]
d1734480 t p80211netdev_rx_bh [p80211]
d1734450 T p80211netdev_rx [p80211]
d5c5b9e7 a __crc_p80211netdev_rx [p80211]
d1735f6c r __kcrctab_register_wlandev [p80211]
d1735fb7 r __kstrtab_register_wlandev [p80211]
d1736058 r __ksymtab_register_wlandev [p80211]
d1735f74 r __kcrctab_unregister_wlandev [p80211]
d1735fd8 r __kstrtab_unregister_wlandev [p80211]
d1736068 r __ksymtab_unregister_wlandev [p80211]
d1734cd0 T register_wlandev [p80211]
e42141f4 a __crc_unregister_wlandev [p80211]
d1734d90 T unregister_wlandev [p80211]
850bac0d a __crc_register_wlandev [p80211]
d1735f7c r __kcrctab_wlan_unsetup [p80211]
d1735ff6 r __kstrtab_wlan_unsetup [p80211]
d1736078 r __ksymtab_wlan_unsetup [p80211]
d1734c80 T wlan_unsetup [p80211]
ab94eeb9 a __crc_wlan_unsetup [p80211]
d1735f74 r __kcrctab_unregister_wlandev [p80211]
d1735fd8 r __kstrtab_unregister_wlandev [p80211]
d1736068 r __ksymtab_unregister_wlandev [p80211]
e42141f4 a __crc_unregister_wlandev [p80211]
d1734d90 T unregister_wlandev [p80211]
d1735f64 r __kcrctab_p80211netdev_hwremoved [p80211]
d1735f90 r __kstrtab_p80211netdev_hwremoved [p80211]
d1736048 r __ksymtab_p80211netdev_hwremoved [p80211]
c72d62f9 a __crc_p80211netdev_hwremoved [p80211]
d1735160 T p80211netdev_hwremoved [p80211]
d1735f78 r __kcrctab_wlan_setup [p80211]
d1735feb r __kstrtab_wlan_setup [p80211]
d1736070 r __ksymtab_wlan_setup [p80211]
a7e4368a a __crc_wlan_setup [p80211]
d1734b20 T wlan_setup [p80211]
d1735f8c r __kcrctab_p80211skb_rxmeta_attach [p80211]
d173602f r __kstrtab_p80211skb_rxmeta_attach [p80211]
d1736098 r __ksymtab_p80211skb_rxmeta_attach [p80211]
d39cf3c4 a __crc_p80211skb_rxmeta_attach [p80211]
d1731cc0 T p80211skb_rxmeta_attach [p80211]
d1735f70 r __kcrctab_p80211netdev_rx [p80211]
d1735fc8 r __kstrtab_p80211netdev_rx [p80211]
d1736060 r __ksymtab_p80211netdev_rx [p80211]
d1734480 t p80211netdev_rx_bh [p80211]
d1734450 T p80211netdev_rx [p80211]
d5c5b9e7 a __crc_p80211netdev_rx [p80211]
d1735f6c r __kcrctab_register_wlandev [p80211]
d1735fb7 r __kstrtab_register_wlandev [p80211]
d1736058 r __ksymtab_register_wlandev [p80211]
d1735f74 r __kcrctab_unregister_wlandev [p80211]
d1735fd8 r __kstrtab_unregister_wlandev [p80211]
d1736068 r __ksymtab_unregister_wlandev [p80211]
d1734cd0 T register_wlandev [p80211]
e42141f4 a __crc_unregister_wlandev [p80211]
d1734d90 T unregister_wlandev [p80211]
850bac0d a __crc_register_wlandev [p80211]
d1735f7c r __kcrctab_wlan_unsetup [p80211]
d1735ff6 r __kstrtab_wlan_unsetup [p80211]
d1736078 r __ksymtab_wlan_unsetup [p80211]
d1734c80 T wlan_unsetup [p80211]
ab94eeb9 a __crc_wlan_unsetup [p80211]
d1735f74 r __kcrctab_unregister_wlandev [p80211]
d1735fd8 r __kstrtab_unregister_wlandev [p80211]
d1736068 r __ksymtab_unregister_wlandev [p80211]
e42141f4 a __crc_unregister_wlandev [p80211]
d1734d90 T unregister_wlandev [p80211]
d1735f64 r __kcrctab_p80211netdev_hwremoved [p80211]
d1735f90 r __kstrtab_p80211netdev_hwremoved [p80211]
d1736048 r __ksymtab_p80211netdev_hwremoved [p80211]
c72d62f9 a __crc_p80211netdev_hwremoved [p80211]
d1735160 T p80211netdev_hwremoved [p80211]
d1735f78 r __kcrctab_wlan_setup [p80211]
d1735feb r __kstrtab_wlan_setup [p80211]
d1736070 r __ksymtab_wlan_setup [p80211]
a7e4368a a __crc_wlan_setup [p80211]
d1734b20 T wlan_setup [p80211]
d1735f8c r __kcrctab_p80211skb_rxmeta_attach [p80211]
d173602f r __kstrtab_p80211skb_rxmeta_attach [p80211]
d1736098 r __ksymtab_p80211skb_rxmeta_attach [p80211]
d39cf3c4 a __crc_p80211skb_rxmeta_attach [p80211]
d1731cc0 T p80211skb_rxmeta_attach [p80211]
linux:~ #


MFG
Erdmaenchen
 
tach

Das ist schon recht viel.

Diese Ausgabe enthaelt jetzt alle Symbole, welche als unknown bezeichnet wurden (der Kernel also gemaess insmod nicht kennt (dies aber eigentlich nicht zutrifft)).
Du kannst jedoch erkennen, dass der Buchstabe T am Beispiel von p80211skb_rxmeta_attach darauf hinweist, dass die Funktion grundsaetzlich von einem Modul ansprechbar ist (nicht als static implementiert).

Das Problem muss also in der Versionsnummerierung und oder den Parametern liegen, denn das ist die zweite Meldung, welche dmesg neben dem unknown ausgibt.

Um weiter zu kommen sind folgende Informationen von Interesse:

1. Was fuer eine verwendete Distribution und Kernel (uname -r) (mit Version und letztem Patchstand)
2. Woher ist das Modul prism2_usb.ko ?
3. Ist der Kernel selbst uebersetzt oder Standardkernel?

4. Lies bitte mal http://www.users.bigpond.com/vkelim/SuSE_notes/node74.html durch

Bezueglich deiner Mail: bitte beachte, dass ich nicht viel Zeit habe, und deshalb dann antworte, wenn ich Zeit dazu finde.



greetz by
Marco Gerber
 
Hallo,
sorry wegen der Mail dachte nur das du evt nicht mehr ins Forum kuckst.

1. meine Kernel ist die Standart Kernel von Suse Linux 10 und auch die standert Kernel Scource die ich über Yast installiert habe

2. Omg ich glaube du meinst linux-wlan-ng-0.2.3.tar.bz2. Habe auch die Firmware für Prisma 2 installiert

3 an der Kernel hab ich nichts gemacht

Gruß
Simon
 
Anmelden, um zu antworten.

Ähnliche Themen

ip6tables Problem
ip6tables Problem: Hallo zusammen, ich hab ein Problem kann aber keinen Fehler finden, äußert sich wie folgt, ich habe endlich für ein System in Netz eine IPv6 bekommen und...

Verbindungsaufbau via nm-applet schlaegt fehl
Verbindungsaufbau via nm-applet schlaegt fehl: Hallo, seit einem Update auf Gnome3 funktioniert ``nm-applet'' nicht mehr richtig. Wenn ich auf eine WLan-Verbindung klicke, schlaegt das Verbinden fehl...

USB Fehler bei aufwachender Platte
USB Fehler bei aufwachender Platte: Hallo zusammen, ich habe aktuell ein kleines Problem, was mich in den Wahnsinn treibt. Die Folgende Hardware spielt zusammen: USB 3.0 über xhci_hcd an...

NagiosGrapher 1.7.1 funktioniert nicht
NagiosGrapher 1.7.1 funktioniert nicht: Hallo zusammen, ich habe auf einem Server mit CentOS 6.4 x86_64 und Nagios Core 3.5.0 versucht den NagiosGrapher 1.7.1 zu installieren. Die Installation...

OpenSuse 12.3 / Tiefschlaf funktioniert nicht
OpenSuse 12.3 / Tiefschlaf funktioniert nicht: Hallo zusammen. Ein altes Thema mal wieder. Aber ich bekomme es mit Google und Co. leider nicht gelöst. Vielleicht weiß einer von euch Rat. Der...

Neueste Themen

Zurück
Oben