Fehler beim Kompilieren von qcserial

[Gast123]

Hallo Leute,

seit längerem versuche ich nun meine auf dem Gobi 2000 Chipsatz basierendes UMTS Modem zum Laufen zu bekommen. Betriebssystem ist Fedora 13.
Ich bin nach den Tutorials vorgegangen. Leider komme ich beim Kompilieren der qcserial.c nicht weiter.
Folgender Fehler wird ausgegeben.
Leider habe ich keine Ahnung, was die Ursache sein könnte:

neumannr@thinkpad:~/Daten/WWAN Gobi 2000 HowTo/qcserial> make
make -C /lib/modules/2.6.34.7-56.fc13.x86_64/build SUBDIRS=/home/neumannr/Daten/WWAN Gobi 2000 HowTo/qcserial modules
make[1]: Entering directory `/usr/src/kernels/2.6.34.7-56.fc13.x86_64'
make[1]: *** Keine Regel, um »Gobi« zu erstellen.  Schluss.
make[1]: Leaving directory `/usr/src/kernels/2.6.34.7-56.fc13.x86_64'
make: *** [default] Fehler 2

Hier der Inhalt der Makefile:

obj-m += qcserial.o

KDIR := /lib/modules/$(shell uname -r)
PWD  := $(shell pwd)

all: default

default:
	$(MAKE) -C $(KDIR)/build SUBDIRS=$(PWD) modules

clean:
	$(MAKE) -C $(KDIR)/build SUBDIRS=$(PWD) clean
	@rm -f modules.order
	@rm -f Module.markers
	@rm -f *~

install:
	cp qcserial.ko $(KDIR)/kernel/drivers/usb/serial/
	depmod -a

uninstall:
	rm $(KDIR)/kernel/drivers/usb/serial/qcserial.ko
	rmmod qcserial

Und die qcserial.c:

/*
 * Qualcomm Serial USB driver
 *
 *	Copyright (c) 2008 QUALCOMM Incorporated.
 *	Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
 *	Copyright (c) 2009 Novell Inc.
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License version
 *	2 as published by the Free Software Foundation.
 *
 */

#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>

#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"

static int debug;

static struct usb_device_id id_table[] = {
	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
	{USB_DEVICE(0x03f0, 0x251d)},	/* HP un2420 Gobi Modem/GPS Device */
	{USB_DEVICE(0x03f0, 0x241d)},	/* HP un2420 Gobi QDL Device */	  
	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
    {USB_DEVICE(0x05c6, 0x9224)},   /* SONY VAIO VPC-X11 QDL device*/
    {USB_DEVICE(0x05c6, 0x9225)},   /* SONY VAIO VPC-X11 Modem device */
	{ }				/* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);

static struct usb_driver qcdriver = {
	.name			= "qcserial",
	.probe			= usb_serial_probe,
	.disconnect		= usb_serial_disconnect,
	.id_table		= id_table,
	.suspend		= usb_serial_suspend,
	.resume			= usb_serial_resume,
	.supports_autosuspend	= true,
};

static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
	int retval = -ENODEV;
	__u8 nintf;
	__u8 ifnum;
  __u8 altsetting;

	dbg("%s", __func__);

	nintf = serial->dev->actconfig->desc.bNumInterfaces;
	dbg("Num Interfaces = %d", nintf);
	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
	dbg("This Interface = %d", ifnum);

	switch (nintf) {
	case 1:
		/* QDL mode */
    altsetting = serial->interface->num_altsetting - 1;
    
    struct usb_host_interface *intf;
    intf = &serial->interface->altsetting[altsetting];
    if (intf->desc.bNumEndpoints == 2) {
      if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
          usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
        dbg("QDL port found");
        retval = usb_set_interface(serial->dev, ifnum, altsetting);
        if (retval < 0) {
          dev_err(&serial->dev->dev,
            "Could not set interface, error %d\n",
            retval);
          retval = -ENODEV;
        }
        return retval;
      }
    }
		break;

	case 4:
		/* Composite mode */
		if (ifnum == 2) {
			dbg("Modem port found");
			retval = usb_set_interface(serial->dev, ifnum, 0);
			if (retval < 0) {
				dev_err(&serial->dev->dev,
					"Could not set interface, error %d\n",
					retval);
				retval = -ENODEV;
			}
			return retval;
		}
		break;

	default:
		dev_err(&serial->dev->dev,
			"unknown number of interfaces: %d\n", nintf);
		return -ENODEV;
	}

	return retval;
}

static struct usb_serial_driver qcdevice = {
	.driver = {
		.owner     = THIS_MODULE,
		.name      = "qcserial",
	},
	.description         = "Qualcomm USB modem",
	.id_table            = id_table,
	.usb_driver          = &qcdriver,
	.num_ports           = 1,
	.probe               = qcprobe,
};

static int __init qcinit(void)
{
	int retval;

	retval = usb_serial_register(&qcdevice);
	if (retval)
		return retval;

	retval = usb_register(&qcdriver);
	if (retval) {
		usb_serial_deregister(&qcdevice);
		return retval;
	}

	return 0;
}

static void __exit qcexit(void)
{
	usb_deregister(&qcdriver);
	usb_serial_deregister(&qcdevice);
}

module_init(qcinit);
module_exit(qcexit);

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");

Wie bekomme ich das nun kompiliert?
Danke für eure Hilfe!

MfG
Schard

EDIT:
Erledigt: Leerzeichen im Dateipfad... -.-