Eicon Diva macht zicken

[Nemesis]

hi,
ich würde gerne einen anrufbeantworter einrichten, bekomme aber meine "Eicon Networks Diva Server BRI-2M 2.0 PCI" nicht zum laufen.
ich habe folgende module geladen:

capi                   16672  0
capifs                  5800  2 capi
divacapi              151464  0
divas                  66192  0
divadidd               11460  2 divacapi,divas
kernelcapi             44576  2 divacapi,capi

aber capiinfo gibt mir dann folgendes aus:

capi not installed - No such device or address (6)

kann mir da jemand weiterhelfen?

thx

 

[calavera]

Hallo,
keine Ahnung, ob's noch einen anderen Weg gibt, aber habe mir folgendes Packet herunter geladen:

wget ftp://ftp.melware.net/divas/v2/divactrl_2.1.tar.gz

Entpacken mit:

tar xvfz divactrl_2.1.tar.gz

Installieren:

./configure
make
make install

Evtl. Firmware (ftp://ftp.melware.net/divas/v2/firmware/protocols_all.tar.bz2) nach /usr/share/eicon entpacken.

Konfigurieren:

/usr/share/eicon/Config

Starten:

/usr/share/eicon/divas_cfg.rc

capiinfo liefert dann:

Number of Controllers : 1
Controller 1:
Manufacturer: Eicon Networks
CAPI Version: 2.0
Manufacturer Version: 2.0
Serial Number: 3548
BChannels: 2
Global Options: 0x000001f9
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x000000df
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
   56 kbit/s bit-transparent operation
   Modem with all negotiations
B2 protocols support: 0x00001fdb
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 for fax group 3
   Transparent (ignoring framing errors of B1 protocol)
   Modem error correction and compression (V.42bis or MNP5)
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 asyncronous mode with V.42bis compression
   V.120 bit-transparent mode
   LAPD with Q.921 including free SAPI selection
B3 protocols support: 0x000000b7
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   T.30 for fax group 3
   T.30 for fax group 3 with extensions
   Modem

  0000
  0200
  f9010000
  df000000
  db1f0000
  b7000000
  00000000 00000000 00000000 00000000 00000000 00000000
  f9000000 00000000 00000000 00000000 00000000

Supplementary services support: 0x0000053f
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection