Die Usb-Festplatte wird nicht mehr eingehängt!

[shino]

Hallo!

Habe plötzlich ein Problem mit meiner externen Platte....
und bitte um Hilfe.

Bei der Übertragung von Daten hat sie sich plötzlich ausgehängt und nach einem erneuten einhängen kommt dieser Fehler:

"Einhängen von Expansion Drive nicht möglich"

Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

Keine Ahnung was das plötzlich soll!

Nach einem Neustart keine Veränderung.


Das Problem bestand auch früher, dass mein Ubuntu 9.10 die Platte einfach aushängt nach ner Weile, bis jetzt war nur während diesem Aushängen keine Datenübertragung.

Habe an sich ntfs-Treiber drauf...

Hat jemand ne Ahnung warum jetzt die Platte nicht mehr angehängt wird und warum sie überhaupt dauernd abgestürzt ist?

Danke.

 

[saeckereier]

Hallo!

NTFS is either inconsistent, or there is a hardware fault [...]
In the first case run chkdsk /f on Windows then reboot into Windows twice.

Warum machste denn das nicht einfach??

 

[daboss]

Bzw. falls kein Windows existiert, kann man ntfsfix probieren.

Und wenn's mal wieder geht (oder auch so), würde ich die Platte mal dringend testen. Hört sich ja nicht so toll an, wenn die selbständig aussteigt, find ich.

 

[shino]

Warum machste denn das nicht einfach??

Mein Windows ist schon abgelaufen... ich kann sie höchstens mal an ein Notebook anschließen und da das unter Windows testen.

Und was ich nicht verstehe WARUM ist es so?
Also warum muss ich das unter WINDOWS testen??

aber ich probier es mal.
danke.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.

Bzw. falls kein Windows existiert, kann man ntfsfix probieren.

Und wenn's mal wieder geht (oder auch so), würde ich die Platte mal dringend testen. Hört sich ja nicht so toll an, wenn die selbständig aussteigt, find ich.

Aber kann es was mit der Platte zu tun haben? Es sind doch wahrscheinlich irgendwelche Linux-Einstellungen die die Platte kicken oder?

OK ntfsfix hat funktioniert!!
Danke dir!!

nur ist mir da die Frage warum zum Geier entmountet sich die Platte automatisch??

Denn ich werde jetzt wohl lieber keine Daten drauf spielen... wenn die mal wieder während der Übertragung sich entmountet dann hab ich wieder den Salat.

Weiss jemand warum es sein könnte?

Danke.

 

[daboss]

Ich hab dir meine Vermutung doch schon gesagt: Imho stimmt was mit der Platte nicht, also Platte testen

/Edit: Oder dein USB-Zeug ist nicht in Ordnung?

 

[saeckereier]

smartctl wäre ein Tool, mit dem die Festplatte untersuchen könntest. Eine andere Möglichkeit wäre die Ausgabe von dmesg nach dem spontanen unmounten zu posten.

 

[shino]

smartctl wäre ein Tool, mit dem die Festplatte untersuchen könntest. Eine andere Möglichkeit wäre die Ausgabe von dmesg nach dem spontanen unmounten zu posten.

hmm... das ist die seeeehr lange Ausgabe von dmesg.. versteht da jemand was und warum?

[    0.251878] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.251882] pci 0000:00:01.0:   IO window: disabled
[    0.251889] pci 0000:00:01.0:   MEM window: 0xfc900000-0xfe9fffff
[    0.251895] pci 0000:00:01.0:   PREFETCH window: 0xd7f00000-0xf7efffff
[    0.251901] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.251906] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
[    0.251913] pci 0000:00:1e.0:   MEM window: 0xfea00000-0xfeafffff
[    0.251918] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.251940] pci 0000:00:1e.0: setting latency timer to 64
[    0.251948] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.251952] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.251956] pci_bus 0000:01: resource 1 mem: [0xfc900000-0xfe9fffff]
[    0.251960] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xf7efffff]
[    0.251964] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
[    0.251968] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.251972] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.251975] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.252038] NET: Registered protocol family 2
[    0.252199] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.252795] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.254039] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.254810] TCP: Hash tables configured (established 131072 bind 65536)
[    0.254817] TCP reno registered
[    0.255023] NET: Registered protocol family 1
[    0.255180] Trying to unpack rootfs image as initramfs...
[    0.517283] Freeing initrd memory: 7469k freed
[    0.529433] cpufreq-nforce2: No nForce2 chipset.
[    0.529499] Scanning for low memory corruption every 60 seconds
[    0.529664] audit: initializing netlink socket (disabled)
[    0.529691] type=2000 audit(1259768644.528:1): initialized
[    0.538379] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.540615] VFS: Disk quotas dquot_6.5.2
[    0.540717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.541628] fuse init (API version 7.12)
[    0.541760] msgmni has been set to 1498
[    0.542137] alg: No test for stdrng (krng)
[    0.542163] io scheduler noop registered
[    0.542166] io scheduler anticipatory registered
[    0.542170] io scheduler deadline registered
[    0.542246] io scheduler cfq registered (default)
[    0.542334] pci 0000:01:00.0: Boot video device
[    0.542360] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.542558] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.542601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.542801] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.542807] ACPI: Power Button [PWRF]
[    0.542892] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.542900] ACPI: Power Button [PWRB]
[    0.543213] processor LNXCPU:00: registered as cooling_device0
[    0.543272] processor LNXCPU:01: registered as cooling_device1
[    0.546431] isapnp: Scanning for PnP cards...
[    0.697000] Switched to high resolution mode on CPU 1
[    0.700087] Switched to high resolution mode on CPU 0
[    0.900147] isapnp: No Plug & Play device found
[    0.901946] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.903867] brd: module loaded
[    0.904614] loop: module loaded
[    0.904746] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.904926] ata_piix 0000:00:1f.1: version 2.13
[    0.904953]   alloc irq_desc for 18 on node -1
[    0.904957]   alloc kstat_irqs on node -1
[    0.904968] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.905064] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.905222] scsi0 : ata_piix
[    0.905388] scsi1 : ata_piix
[    0.907679] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.907684] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.909180] Fixed MDIO Bus: probed
[    0.909257] PPP generic driver version 2.4.2
[    0.909453] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.909494]   alloc irq_desc for 20 on node -1
[    0.909498]   alloc kstat_irqs on node -1
[    0.909509] ehci_hcd 0000:02:0a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    0.909534] ehci_hcd 0000:02:0a.2: EHCI Host Controller
[    0.909617] ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 1
[    0.909681] ehci_hcd 0000:02:0a.2: irq 20, io mem 0xfeafec00
[    0.920015] ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 1.00
[    0.920141] usb usb1: configuration #1 chosen from 1 choice
[    0.920189] hub 1-0:1.0: USB hub found
[    0.920202] hub 1-0:1.0: 4 ports detected
[    0.920305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.920337] uhci_hcd: USB Universal Host Controller Interface driver
[    0.920398]   alloc irq_desc for 16 on node -1
[    0.920402]   alloc kstat_irqs on node -1
[    0.920410] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.920421] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.920426] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.920482] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.920518] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400
[    0.920648] usb usb2: configuration #1 chosen from 1 choice
[    0.920690] hub 2-0:1.0: USB hub found
[    0.920704] hub 2-0:1.0: 2 ports detected
[    0.920778]   alloc irq_desc for 19 on node -1
[    0.920782]   alloc kstat_irqs on node -1
[    0.920788] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.920797] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.920802] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.920853] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.920886] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[    0.921001] usb usb3: configuration #1 chosen from 1 choice
[    0.921051] hub 3-0:1.0: USB hub found
[    0.921067] hub 3-0:1.0: 2 ports detected
[    0.921138] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.921146] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.921151] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.921203] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.921241] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[    0.921365] usb usb4: configuration #1 chosen from 1 choice
[    0.921409] hub 4-0:1.0: USB hub found
[    0.921422] hub 4-0:1.0: 2 ports detected
[    0.921500]   alloc irq_desc for 22 on node -1
[    0.921504]   alloc kstat_irqs on node -1
[    0.921510] uhci_hcd 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.921518] uhci_hcd 0000:02:0a.0: UHCI Host Controller
[    0.921567] uhci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 5
[    0.921600] uhci_hcd 0000:02:0a.0: irq 22, io base 0x0000b400
[    0.921729] usb usb5: configuration #1 chosen from 1 choice
[    0.921771] hub 5-0:1.0: USB hub found
[    0.921784] hub 5-0:1.0: 2 ports detected
[    0.921858]   alloc irq_desc for 23 on node -1
[    0.921861]   alloc kstat_irqs on node -1
[    0.921867] uhci_hcd 0000:02:0a.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.921876] uhci_hcd 0000:02:0a.1: UHCI Host Controller
[    0.921938] uhci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 6
[    0.921971] uhci_hcd 0000:02:0a.1: irq 23, io base 0x0000b800
[    0.922090] usb usb6: configuration #1 chosen from 1 choice
[    0.922132] hub 6-0:1.0: USB hub found
[    0.922145] hub 6-0:1.0: 2 ports detected
[    0.922289] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    0.922293] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.925166] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.925177] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.925268] mice: PS/2 mouse device common for all mice
[    0.925425] rtc_cmos 00:02: RTC can wake from S4
[    0.925482] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.925509] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.925688] device-mapper: uevent: version 1.0.3
[    0.925876] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.926028] device-mapper: multipath: version 1.1.0 loaded
[    0.926033] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.926246] EISA: Probing bus 0 at eisa.0
[    0.926289] EISA: Detected 0 cards.
[    0.926473] cpuidle: using governor ladder
[    0.926480] cpuidle: using governor menu
[    0.927355] TCP cubic registered
[    0.927551] NET: Registered protocol family 10
[    0.928329] lo: Disabled Privacy Extensions
[    0.928901] NET: Registered protocol family 17
[    0.928933] Bluetooth: L2CAP ver 2.13
[    0.928936] Bluetooth: L2CAP socket layer initialized
[    0.928940] Bluetooth: SCO (Voice Link) ver 0.6
[    0.928942] Bluetooth: SCO socket layer initialized
[    0.929027] Bluetooth: RFCOMM TTY layer initialized
[    0.929032] Bluetooth: RFCOMM socket layer initialized
[    0.929035] Bluetooth: RFCOMM ver 1.11
[    0.929095] Using IPI No-Shortcut mode
[    0.929212] PM: Resume from disk failed.
[    0.929233] registered taskstats version 1
[    0.929409]   Magic number: 5:461:739
[    0.929515] rtc_cmos 00:02: setting system clock to 2009-12-02 15:44:05 UTC (1259768645)
[    0.929520] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.929523] EDD information not available.
[    1.073750] ata1.00: ATA-6: WDC WD1200BB-22DAA0, 65.13G65, max UDMA/100
[    1.073755] ata1.00: 234441648 sectors, multi 16: LBA48 
[    1.089250] ata1.00: configured for UDMA/100
[    1.089433] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BB-22D 65.1 PQ: 0 ANSI: 5
[    1.089647] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.089732] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.089810] sd 0:0:0:0: [sda] Write Protect is off
[    1.089815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.089853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.090069]  sda:
[    1.096297] ata2.00: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS02, max UDMA/33
[    1.096345] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[    1.105436]  sda1 sda2 sda3 sda4 < sda5
[    1.129201] ata2.00: configured for UDMA/33
[    1.139141]  sda6 >
[    1.139693] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.144214] ata2.01: configured for UDMA/33
[    1.147106] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD-ROM SH-D162C TS02 PQ: 0 ANSI: 5
[    1.149187] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    1.149193] Uniform CD-ROM driver Revision: 3.20
[    1.149328] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.149416] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.153153] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[    1.165919] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.166040] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    1.166106] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    1.166149] Freeing unused kernel memory: 540k freed
[    1.167079] Write protecting the kernel text: 4568k
[    1.167158] Write protecting the kernel read-only data: 1836k
[    1.356112] Linux agpgart interface v0.103
[    1.366330] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.411225] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    1.414762] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.431899] Floppy drive(s): fd0 is 1.44M
[    1.453858] FDC 0 is a post-1991 82077
[    1.467620] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.467631] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.467734] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.491628] e100 0000:02:08.0: PME# disabled
[    1.505448] e100: eth0: e100_probe: addr 0xfeaff000, irq 20, MAC addr 00:0c:6e:45:9b:43
[    1.596497] usb 2-1: configuration #1 chosen from 1 choice
[    1.600013] ohci1394 0000:02:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.613026] usbcore: registered new interface driver hiddev
[    1.627031] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[    1.627327] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[    1.627367] usbcore: registered new interface driver usbhid
[    1.627374] usbhid: v2.6:USB HID core driver
[    1.655034] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[feafd000-feafd7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.712063] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    1.963688] usb 2-2: configuration #1 chosen from 1 choice
[    2.014010] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[    2.014128] generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-2/input0
[    2.103667] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input5
[    2.103791] generic-usb 0003:1241:1503.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-2/input1
[    2.345039] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.499099] usb 5-1: configuration #1 chosen from 1 choice
[    2.502012] hub 5-1:1.0: USB hub found
[    2.503902] hub 5-1:1.0: 4 ports detected
[    2.793938] usb 5-1.1: new full speed USB device using uhci_hcd and address 3
[    2.920109] usb 5-1.1: configuration #1 chosen from 1 choice
[    2.932180] Initializing USB Mass Storage driver...
[    2.934012] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.934215] usbcore: registered new interface driver usb-storage
[    2.934224] USB Mass Storage support registered.
[    2.934822] usb-storage: device found at 3
[    2.934830] usb-storage: waiting for device to settle before scanning
[    2.940326] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08004603016e07a5]
[    3.037975] usb 5-1.1: USB disconnect, address 3
[    3.363037] usb 5-1.1: new full speed USB device using uhci_hcd and address 4
[    3.500223] usb 5-1.1: configuration #1 chosen from 1 choice
[    3.535130] scsi6 : SCSI emulation for USB Mass Storage devices
[    3.536324] usb-storage: device found at 4
[    3.536329] usb-storage: waiting for device to settle before scanning
[    3.612591] PM: Starting manual resume from disk
[    3.612598] PM: Resume from partition 8:6
[    3.612602] PM: Checking hibernation image.
[    3.612832] PM: Resume from disk failed.
[    3.636779] EXT4-fs (sda3): barriers enabled
[    3.653483] kjournald2 starting: pid 360, dev sda3:8, commit interval 5 seconds
[    3.653504] EXT4-fs (sda3): delayed allocation enabled
[    3.653511] EXT4-fs: file extents enabled
[    3.654285] EXT4-fs: mballoc enabled
[    3.654309] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    4.307236] type=1505 audit(1259768648.876:2): operation="profile_load" pid=383 name=/usr/share/gdm/guest-session/Xsession
[    4.311330] type=1505 audit(1259768648.878:3): operation="profile_load" pid=384 name=/sbin/dhclient3
[    4.311970] type=1505 audit(1259768648.878:4): operation="profile_load" pid=384 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.312348] type=1505 audit(1259768648.882:5): operation="profile_load" pid=384 name=/usr/lib/connman/scripts/dhclient-script
[    4.375395] type=1505 audit(1259768648.943:6): operation="profile_load" pid=385 name=/usr/bin/evince
[    4.386465] type=1505 audit(1259768648.954:7): operation="profile_load" pid=385 name=/usr/bin/evince-previewer
[    4.392883] type=1505 audit(1259768648.962:8): operation="profile_load" pid=385 name=/usr/bin/evince-thumbnailer
[    4.414477] type=1505 audit(1259768648.982:9): operation="profile_load" pid=387 name=/usr/lib/cups/backend/cups-pdf
[    4.415230] type=1505 audit(1259768648.982:10): operation="profile_load" pid=387 name=/usr/sbin/cupsd
[    5.305953] Adding 811240k swap on /dev/sda6.  Priority:-1 extents:1 across:811240k 
[    5.950398] udev: starting version 147
[    5.989272] EXT4-fs (sda3): internal journal on sda3:8
[    6.849678] EXT4-fs (sda5): barriers enabled
[    6.866373] kjournald2 starting: pid 586, dev sda5:8, commit interval 5 seconds
[    6.866609] EXT4-fs (sda5): internal journal on sda5:8
[    6.866616] EXT4-fs (sda5): delayed allocation enabled
[    6.866622] EXT4-fs: file extents enabled
[    6.873635] EXT4-fs: mballoc enabled
[    6.873662] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    7.380991] EXT4-fs (sda1): barriers enabled
[    7.383786] kjournald2 starting: pid 600, dev sda1:8, commit interval 5 seconds
[    7.383980] EXT4-fs (sda1): internal journal on sda1:8
[    7.383986] EXT4-fs (sda1): delayed allocation enabled
[    7.383992] EXT4-fs: file extents enabled
[    7.384242] EXT4-fs: mballoc enabled
[    7.384267] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    8.314613] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.449699] __ratelimit: 3 callbacks suppressed
[    8.449704] type=1505 audit(1259765053.018:12): operation="profile_replace" pid=675 name=/usr/share/gdm/guest-session/Xsession
[    8.452843] type=1505 audit(1259765053.022:13): operation="profile_replace" pid=676 name=/sbin/dhclient3
[    8.453513] type=1505 audit(1259765053.022:14): operation="profile_replace" pid=676 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    8.453865] type=1505 audit(1259765053.022:15): operation="profile_replace" pid=676 name=/usr/lib/connman/scripts/dhclient-script
[    8.464040] type=1505 audit(1259765053.034:16): operation="profile_replace" pid=677 name=/usr/bin/evince
[    8.523637] intel_rng: FWH not detected
[    8.546256] type=1505 audit(1259765053.114:17): operation="profile_replace" pid=677 name=/usr/bin/evince-previewer
[    8.548352] usb-storage: device scan complete
[    8.555296] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    8.564137] type=1505 audit(1259765053.134:18): operation="profile_replace" pid=677 name=/usr/bin/evince-thumbnailer
[    8.588537] type=1505 audit(1259765053.158:19): operation="profile_replace" pid=719 name=/usr/lib/cups/backend/cups-pdf
[    8.589674] type=1505 audit(1259765053.158:20): operation="profile_replace" pid=719 name=/usr/sbin/cupsd
[    8.597410] type=1505 audit(1259765053.166:21): operation="profile_replace" pid=720 name=/usr/sbin/tcpdump
[    8.621892] sr2: scsi-1 drive
[    8.622235] sr 6:0:0:0: Attached scsi CD-ROM sr2
[    8.622423] sr 6:0:0:0: Attached scsi generic sg3 type 5
[    8.777476] nf_conntrack version 0.5.0 (12285 buckets, 49140 max)
[    8.777999] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    8.778005] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    8.778010] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    8.907823] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.001997] lp: driver loaded but no devices found
[    9.432951] nvidia: module license 'NVIDIA' taints kernel.
[    9.432961] Disabling lock debugging due to kernel taint
[    9.519543] usbcore: registered new interface driver usbserial
[    9.519572] USB Serial support registered for generic
[    9.519656] usbcore: registered new interface driver usbserial_generic
[    9.519661] usbserial: USB Serial Driver core
[    9.580948] USB Serial support registered for GSM modem (1-port)
[    9.581043] option 5-1.1:1.0: GSM modem (1-port) converter detected
[    9.581194] usb 5-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[    9.581215] option 5-1.1:1.1: GSM modem (1-port) converter detected
[    9.581304] usb 5-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[    9.581323] option 5-1.1:1.2: GSM modem (1-port) converter detected
[    9.581410] usb 5-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[    9.581442] usbcore: registered new interface driver option
[    9.581446] option: v0.7.2:USB Driver for GSM modems
[    9.585899] w83627hf: Found W83637HF chip at 0x290
[    9.690979] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.691415] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.20  Thu Jun 25 19:23:24 PDT 2009
[    9.702971]   alloc irq_desc for 17 on node -1
[    9.702979]   alloc kstat_irqs on node -1
[    9.702998] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.703095] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   10.131618] intel8x0_measure_ac97_clock: measured 62151 usecs (2993 samples)
[   10.131625] intel8x0: clocking to 48000
[   13.873998] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.772969] ppdev: user-space parallel port driver
[   19.168058] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   19.168082] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[   19.168123] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[   20.498615] CPU0 attaching NULL sched-domain.
[   20.498626] CPU1 attaching NULL sched-domain.
[   20.513121] CPU0 attaching sched-domain:
[   20.513127]  domain 0: span 0-1 level SIBLING
[   20.513132]   groups: 0 1
[   20.513140]   domain 1: span 0-1 level MC
[   20.513144]    groups: 0-1 (__cpu_power = 2048)
[   20.513155] CPU1 attaching sched-domain:
[   20.513158]  domain 0: span 0-1 level SIBLING
[   20.513162]   groups: 1 0
[   20.513169]   domain 1: span 0-1 level MC
[   20.513173]    groups: 0-1 (__cpu_power = 2048)
[   24.037625] CPU0 attaching NULL sched-domain.
[   24.037636] CPU1 attaching NULL sched-domain.
[   24.053122] CPU0 attaching sched-domain:
[   24.053129]  domain 0: span 0-1 level SIBLING
[   24.053134]   groups: 0 1
[   24.053144] CPU1 attaching sched-domain:
[   24.053147]  domain 0: span 0-1 level SIBLING
[   24.053151]   groups: 1 0
[   37.181069] UDF-fs: No VRS found
[   37.181078] UDF-fs: No partition found (1)
[   37.212104] ISO 9660 Extensions: Microsoft Joliet Level 1
[   37.217033] ISOFS: changing to secondary root
[  132.976932] usb 5-1.1: USB disconnect, address 4
[  132.977918] option: option_instat_callback: error -108
[  132.978273] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  132.978310] option 5-1.1:1.0: device disconnected
[  132.978542] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  132.978575] option 5-1.1:1.1: device disconnected
[  132.978799] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  132.978832] option 5-1.1:1.2: device disconnected
[  141.041070] usb 5-1.1: new full speed USB device using uhci_hcd and address 5
[  141.167249] usb 5-1.1: configuration #1 chosen from 1 choice
[  141.175534] option 5-1.1:1.0: GSM modem (1-port) converter detected
[  141.175751] usb 5-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[  141.181765] option 5-1.1:1.1: GSM modem (1-port) converter detected
[  141.182074] usb 5-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[  141.187936] option 5-1.1:1.2: GSM modem (1-port) converter detected
[  141.188244] usb 5-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[  141.202240] scsi10 : SCSI emulation for USB Mass Storage devices
[  141.214205] usb-storage: device found at 5
[  141.214211] usb-storage: waiting for device to settle before scanning
[  146.213918] usb-storage: device scan complete
[  146.216925] scsi 10:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[  146.252879] sr3: scsi-1 drive
[  146.253205] sr 10:0:0:0: Attached scsi CD-ROM sr3
[  146.253393] sr 10:0:0:0: Attached scsi generic sg3 type 5
[  147.773048] usb 5-1.2: new full speed USB device using uhci_hcd and address 6
[  147.875059] usb 5-1.2: not running at top speed; connect to a high speed hub
[  147.903227] usb 5-1.2: configuration #1 chosen from 1 choice
[  147.911830] scsi11 : SCSI emulation for USB Mass Storage devices
[  147.912430] usb-storage: device found at 6
[  147.912436] usb-storage: waiting for device to settle before scanning
[  152.913869] usb-storage: device scan complete
[  152.916864] scsi 11:0:0:0: Direct-Access     Seagate  Portable         0130 PQ: 0 ANSI: 4
[  152.918268] sd 11:0:0:0: Attached scsi generic sg4 type 0
[  152.928468] sd 11:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  152.930934] sd 11:0:0:0: [sdb] Write Protect is off
[  152.930946] sd 11:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[  152.930952] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[  152.938808] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[  152.938819]  sdb: sdb1
[  153.214860] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[  153.214869] sd 11:0:0:0: [sdb] Attached SCSI disk
[  155.294168] ISO 9660 Extensions: Microsoft Joliet Level 1
[  155.317198] ISOFS: changing to secondary root
[  179.877762] PPP BSD Compression module registered
[  179.894839] PPP Deflate Compression module registered
[ 3632.786648] usb 5-1.2: USB disconnect, address 6
[ 3636.273150] usb 5-1.2: new full speed USB device using uhci_hcd and address 7
[ 3636.375161] usb 5-1.2: not running at top speed; connect to a high speed hub
[ 3636.403333] usb 5-1.2: configuration #1 chosen from 1 choice
[ 3636.408717] scsi12 : SCSI emulation for USB Mass Storage devices
[ 3636.414602] usb-storage: device found at 7
[ 3636.414609] usb-storage: waiting for device to settle before scanning
[ 3641.413967] usb-storage: device scan complete
[ 3641.416950] scsi 12:0:0:0: Direct-Access     Seagate  Portable         0130 PQ: 0 ANSI: 4
[ 3641.418195] sd 12:0:0:0: Attached scsi generic sg4 type 0
[ 3641.423012] sd 12:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3641.429903] sd 12:0:0:0: [sdb] Write Protect is off
[ 3641.429914] sd 12:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[ 3641.429921] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 3641.438903] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 3641.438915]  sdb: sdb1
[ 3641.696977] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 3641.696988] sd 12:0:0:0: [sdb] Attached SCSI disk
[ 7232.489686] usb 5-1.2: USB disconnect, address 7
[ 7235.764170] usb 5-1.2: new full speed USB device using uhci_hcd and address 8
[ 7235.863183] usb 5-1.2: not running at top speed; connect to a high speed hub
[ 7235.891361] usb 5-1.2: configuration #1 chosen from 1 choice
[ 7235.912210] scsi13 : SCSI emulation for USB Mass Storage devices
[ 7235.917463] usb-storage: device found at 8
[ 7235.917470] usb-storage: waiting for device to settle before scanning
[ 7240.921039] usb-storage: device scan complete
[ 7240.924062] scsi 13:0:0:0: Direct-Access     Seagate  Portable         0130 PQ: 0 ANSI: 4
[ 7240.925143] sd 13:0:0:0: Attached scsi generic sg4 type 0
[ 7240.954342] sd 13:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 7240.956962] sd 13:0:0:0: [sdb] Write Protect is off
[ 7240.956970] sd 13:0:0:0: [sdb] Mode Sense: 2f 08 00 00
[ 7240.956974] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 7240.966919] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 7240.966930]  sdb: sdb1
[ 7241.222988] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 7241.223001] sd 13:0:0:0: [sdb] Attached SCSI disk
[ 7372.560939] sd 13:0:0:0: [sdb] Unhandled error code
[ 7372.560945] sd 13:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 7372.560952] end_request: I/O error, dev sdb, sector 249189631
[ 7372.560962] Buffer I/O error on device sdb1, logical block 31148696
[ 7372.561106] sd 13:0:0:0: [sdb] Unhandled error code
[ 7372.561110] sd 13:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 7372.561115] end_request: I/O error, dev sdb, sector 249189631
[ 7372.561121] Buffer I/O error on device sdb1, logical block 31148696
[ 7372.563582] usb 5-1.2: USB disconnect, address 8
[ 7375.949336] usb 5-1.2: new full speed USB device using uhci_hcd and address 9
[ 7376.051348] usb 5-1.2: not running at top speed; connect to a high speed hub
[ 7376.079519] usb 5-1.2: configuration #1 chosen from 1 choice
[ 7376.085965] scsi14 : SCSI emulation for USB Mass Storage devices
[ 7376.086473] usb-storage: device found at 9
[ 7376.086479] usb-storage: waiting for device to settle before scanning

 

[schwedenmann]

Usb

Hallo

Wenn ich dmseg richtig deute, betreibst du eine USB-Host Controler undeinen USB-HUb.

Die Platte disconnected mehrere male, wie in dmseg zus ehen ist, außerdem scheint noch ein Fehelr in Sector xyz vorzuliegen.

laß mal smart drüebrlaufen und benutze anstat den Hub den Host-Controller.

mfg
scvhwedenmann

 

[shino]

Hallo

Wenn ich dmseg richtig deute, betreibst du eine USB-Host Controler undeinen USB-HUb.

Die Platte disconnected mehrere male, wie in dmseg zus ehen ist, außerdem scheint noch ein Fehelr in Sector xyz vorzuliegen.

laß mal smart drüebrlaufen und benutze anstat den Hub den Host-Controller.

mfg
scvhwedenmann

Hey!

Danke schon mal

nur verstehe ich da nicht viel daraus...

Wo ist der Unterschied zwischen nem Hub- und Host-Controller?
Wenn ich eins von beiden benutze dann eher unbewusst.

Und wie benutze ich dann nur den Host-Controller?

Hat es was damit zu tun dass mein Monitor mit nem Usb verbunden ist und ich dann die Platte an mein Monitor anschließe? Ist es dann nicht mehr direkt oder so und macht deswegen Probleme?

Das mit dem Smart probiere ich mal und stell die Ergebnisse hier rein...
jetzt gerade will er die Platte gar nicht mounten... grrrr

 

[schwedenmann]

Usb

Hallo

Hat es was damit zu tun dass mein Monitor mit nem Usb verbunden ist und ich dann die Platte an mein Monitor anschließe? Ist es dann nicht mehr direkt oder so und macht deswegen Probleme?

Könnte sein, wenn es kein Hardarefehlrr ist, was du mit smart herausfidnen kannst.

Schließ die Platte direkt an den USB-Port des PC an, ich hoffe du ahst noch einen frei, oder kannst eine entbehren.

mfg
schwedenmann

 

[shino]

Hallo



Könnte sein, wenn es kein Hardarefehlrr ist, was du mit smart herausfidnen kannst.

Schließ die Platte direkt an den USB-Port des PC an, ich hoffe du ahst noch einen frei, oder kannst eine entbehren.

mfg
schwedenmann

also die Ausgabe von "sudo smartctl /dev/sdb1" ist:

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

irgendwie.. naja... nichts..

muss ich da irgendwelche zusätzlichen Parameter angeben??


hab die jetzt direkt an der Karte angeschlossen...

den USB-Internet-Stick auch... was etwas doof ist weil er da hinter dem PC unten noch weniger Empfang hat als er schon so hat... ojeoje.

 

[daboss]

Probiers mal mit nem richtigeren

sudo smartctl --all /dev/sdb

(Alle Smartinfos, und auf die Platte, nicht die Partition)

/Edit: Übringens das erste Beispiel, das einem

smartctl --help

anzeigt...

 

[shino]

Probiers mal mit nem richtigeren

sudo smartctl --all /dev/sdb

(Alle Smartinfos, und auf die Platte, nicht die Partition)

also sdb1 ist bei mir richtig... da ist die Platte.

habe gerade schon das probiert... und ist folgendes rausgekommen:

"sudo smartctl --all /dev/sdb1"

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: Seagate  Portable         Version: 0130
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

danke.


jup...
hab eben schon vor deinem Beitrag --help benutzt und eben diesen Befehl ausprobiert... kam allerdings nicht weiter

 

[daboss]

Ok.. hast ja nicht gesagt, das du das gemacht hast...

Aber nope, sdb ist die Platte, sdb1 die erste primäre Partition auf der Platte (die auch immer (...oder bei dir eher fast immer ) eingehängt wird).

 

[shino]

Ok.. hast ja nicht gesagt, das du das gemacht hast...

Aber nope, sdb ist die Platte, sdb1 die erste primäre Partition auf der Platte (die auch immer (...oder bei dir eher fast immer ) eingehängt wird).

ja... hab das auch gemacht während du dein Beitrag geschrieben hast :-P
*hehe

asooo... hmm...

also das ist dann die Ausgabe von --all sdb und so:

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: Seagate  Portable         Version: 0130
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

also irgendwie au komisch mh?

 

[daboss]

Hm, mir fällt gerade ein, ich meine mal gelesen zu haben, das externe (USB/Firewire) Platten bei den smartmontools probleme machen, weil die sich zwar als SCSI melden, aber nicht als SCSI arbeiten... oder so.

/Edit:
In den FAQ.

 

[shino]

Hm, mir fällt gerade ein, ich meine mal gelesen zu haben, das externe (USB/Firewire) Platten bei den smartmontools probleme machen, weil die sich zwar als SCSI melden, aber nicht als SCSI arbeiten... oder so.

/Edit:
In den FAQ.

hmm... ok...

dennoch danke...

das Problem war wohl der Hub.

ich glaube die spinnt jetzt nicht mehr... hoff ich zumindest.

danke an alle!