mein eggdrop connected einfach zu keinem irc server...
es kommt IMMER zum timeout...


Config Ausschnitt:

#### SERVER MODULE ####

# This module provides the core server support. You have to load this
# if you want your bot to come on IRC. Not loading this is equivalent
# to the old NO_IRC define.
loadmodule server

# What is your network?
# 0 = EFnet (non +e/+I hybrid)
# 1 = IRCnet
# 2 = Undernet
# 3 = DALnet
# 4 = EFnet +e/+I hybrid
# 5 = Others
set net-type 5

# Set the nick the bot uses on IRC, and on the botnet
# unless you specify a separate botnet-nick, here.

set nick "lulu"

# Set the alternative nick which the bot uses on IRC if the nick specified
# by 'set nick' is unavailable. All '?' characters will be replaced by random
# numbers.

set altnick "lala"

# Set what should be displayed in the real-name field for the bot on IRC.
set realname "blala"

# Set here a script to run (if any) when first connecting to a server.
set init-server { putserv "MODE $botnick +i-ws" }

# Set the default port which should be used if none is specified with
# '.jump' or in 'set servers'.
set default-port 6667

# This is the bot's server list. The bot will start at the first server listed,
# and cycle through them whenever it gets disconnected. You need to change these
# servers to YOUR network's servers.
#
# The format is:
# server[:port[:password]]
#
# Both the port and password fields are optional; however, if you want to set a
# password you must also set a port. If a port isn't specified it will default to
# your default-port setting.
set servers {
online.no.quakenet.org
sw.de.quakenet.org
splatterworld.de.quakenet.org
de.quakenet.org
irc.maxed-out.net:6667
}

# This setting makes the bot try to get his original nickname back if its
# primary nickname is already in use.
set keep-nick 1

# Set this to 1 if you don't want your the bot to strip a leading '~'
# on user@hosts.
set strict-host 0

# This setting makes the bot squelch the error message when rejecting a DCC
# CHAT or SEND. Normally it tells the DCC user that the CHAT or SEND has
# been rejected because they don't have access.
# Please note, sometimes IRC server operators detect bots that way.
set quiet-reject 1

# If you want your bot to answer lower case ctcp requests (non rfc-
# compliant), set this setting to 1. mIRC will do this, most other
# clients will not.
set lowercase-ctcp 0

# Set how many ctcps should be answered at once.
set answer-ctcp 3

# Set here how many msgs in how many seconds from one host constitutes
# a flood. If you set this to 0:0, msg flood protection will be disabled.
set flood-msg 5:60

# Set here how many ctcps in how many seconds from one host constitutes
# a flood. If you set this to 0:0, ctcp flood protection will be disabled.
set flood-ctcp 3:60

# This settings makes the bot cycle forever through the server list until
# it successfully connects to one.
set never-give-up 1

# Often, IRC servers call themselves a name other than their actual
# hostname. If you want eggdrop to replace your entry in the config
# file with this name, set this to 1. If you set this setting to 0,
# eggdrop will keep a separate list of what IRC servers call themselves.
set strict-servernames 0

# This setting defines how long eggdrop should wait before moving from one
# server to another on disconnect. If you set 0 here, eggdrop will not wait
# at all and will connect instantly. Setting this too low could result in
# your bot being K:Lined.
set server-cycle-wait 60

# Set here how long eggdrop should wait for a response when connecting to a
# server before giving up and moving on to next server.
set server-timeout 30

# If the number of servers on the net gets below this number, the bot
# will jump to a new server (it will assume it's on the losing end of
# a netsplit). Set this to 0 to turn off. If your bot is running on
# any major IRC network, this should probably be turned off.
set servlimit 0

# Set this to 1 if eggdrop should check for stoned servers? (where the
# server connection has died, but eggdrop hasn't been notified yet).
set check-stoned 1

# This setting allows you the logging of all information received from the
# server via console mode 'r'.
# NOTE: This is a large security hole, allowing people to see user passwords.
# This is now restricted to +n users only. Please choose your owners with
# care.
set use-console-r 0

# This setting allows you the logging of all information sent to the server
# via console mode 'v'.
# NOTE: This is a large security hole, allowing people to see passwords.
# This is now restricted to +n users only. Please choose your owners with
# care.
set debug-output 0

# If you want your bot to exit the server if it receives an ERROR message,
# set this to 1.
set serverror-quit 1

# Set here the maximum number of lines to queue to the server. If you're
# going to dump large chunks of text to people over IRC, you will probably
# want to raise this. 300 is fine for most people though.
set max-queue-msg 300

# If you want eggdrop to trigger binds for ignored users, set this to 1.
set trigger-on-ignore 0

# Allow identical messages in the mode queue?
set double-mode 0

# Allow identical messages in the server queue?
set double-server 0

# Allow identical messages in the help queue?
set double-help 0

# This optimizes the kick queue. It also traces nick changes and parts in
# the channel and changes the kick queue accordingly. There are three
# different options for this setting:
# 0 = Turn it off.
# 1 = Optimize the kick queue by summarizing kicks.
# 2 = Trace nick changes and parts on the channel and change the queue
# accordingly. For example, bot will not try to kick users who have
# already parted the channel.
# ATTENTION: Setting 2 is very CPU intensive.
set optimize-kicks 1

### SERVER MODULE - OTHER NETWORKS (net-type 5) ###

# This settings defines how umode +r is understood by eggdrop. Some
# networks use +r to indicate a restricted connection. If this is your
# case, and you want your bot to leave restricted servers and jump to
# the next server on its list, then set it to 1.
#set check-mode-r 1

# This setting allows you to specify the maximum nick-length supported by
# your network. The default setting is 9. The maximum supported length by
# eggdrop is 32.
#set nick-len 14

#### CTCP MODULE ####

# This module provides the normal ctcp replies that you'd expect.
# Without it loaded, CTCP CHAT will not work. The server module
# is required for this module to function.
loadmodule ctcp

# Set here how the ctcp module should answer ctcps. There are 3 possible
# operating modes:
# 0: Normal behavior is used.
# 1: The bot ignores all ctcps, except for CHAT and PING requests
# by users with the +o flag.
# 2: Normal behavior is used, however the bot will not answer more
# than X ctcps in Y seconds (defined by 'set flood-ctcp').
set ctcp-mode 0

# There are also several variables to help make your bot less noticeable.
# They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
# them to values you'd like.