S
Sir Auron
Routinier
NForce Problem!
Hi!
Also ich habe soeben eine Debian Netinstall gemacht, habe aber das Problem, dass die Sound und Netzwerkkarte nicht geht.
Also ich habe ein NForce Chipset und habe die Orginal Nvidia Treiber, Alsa und Oss installiert. Ich weis aber nicht warum es nicht funktioniert:
Hi!
Also ich habe soeben eine Debian Netinstall gemacht, habe aber das Problem, dass die Sound und Netzwerkkarte nicht geht.
Also ich habe ein NForce Chipset und habe die Orginal Nvidia Treiber, Alsa und Oss installiert. Ich weis aber nicht warum es nicht funktioniert:
Bitte helft mir!dmesg schrieb:NFORCE: IDE controller at PCI slot 0000:00:09.0
NFORCE: chipset revision 195
NFORCE: not 100% native mode: will probe irqs later
NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE: 0000:00:09.0 (rev c3) UDMA100 controller
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdcMA, hddMA
hda: SAMSUNG SV0602H, ATA DISK drive
hdb: WDC WD300AB-00BVA0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 117304992 sectors (60060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2
hdb: max request size: 128KiB
hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100)
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3
hdc: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG CD-R/RW SW-240B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2931760k swap on /dev/hdb2. Priority:-1 extents:1
EXT3 FS on hdb1, internal journal
Real Time Clock Driver v1.12
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Capability LSM initialized
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01462:367c bound to 0000:00:04.0
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, high) -> IRQ 193
eth1: VIA Rhine II at 0x9000, 00:50:ba:23:f1:e7, IRQ 193.
eth1: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
input: PC Speaker
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
ts: Compaq touchscreen protocol output
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xd0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, high) -> IRQ 177
ohci_hcd 0000:00:02.0: nVidia Corporation nForce USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 177, pci mem d0acd000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 21 (level, high) -> IRQ 185
ohci_hcd 0000:00:03.0: nVidia Corporation nForce USB Controller (#2)
PCI: Setting latency timer of device 0000:00:03.0 to 64
ohci_hcd 0000:00:03.0: irq 185, pci mem d0acf000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new full speed USB device using address 2
nvnet: module license 'NVIDIA' taints kernel.
Nvsound: Nvidia Audio Init Module, 14:23:47 Oct 31 2004 version 1.0-1
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 20 (level, high) -> IRQ 177
PCI: Setting latency timer of device 0000:00:05.0 to 64
Nvsound: NVIDIA nForce1 Controller found at Mem 0xec000000 and IRQ b1
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 185
PCI: Setting latency timer of device 0000:00:06.0 to 64
Nvsound: NVIDIA nForce1 Audio found at IO 0xb000 and 0xac00, IRQ b9
Nvsound: Aci_device cfb73800 Apu_device cfb73c00
Nvsound: DEV MIXER 0 DEV AUDIO 3
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
eth0: no link during initialization.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fbd80(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, high) -> IRQ 193
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
NET: Registered protocol family 17
eth1: Setting full-duplex based on MII #8 link partner capability of 45e1.
eth1: no IPv6 routers present
Zuletzt bearbeitet: