GRUB wird nicht geladen --HILFE--

M

maggo

Grünschnabel
Hallo Leute,

ich hoffe dass mir irgendjemand helfen kann. Ich hab schon viel gutes von Linux gehört und wollte das jetzt auch mal ausprobieren. Also hab ich auf mein Laptop auf dem bereits Win XP - Home instaliert war Suse 10.0 auf eine eigene Partition installiert.

Nach abgeschlossener Installation wollte ich nun das Laptop starten doch es bootet nicht.

Ich bekomme nur die Meldung:

GRUB Loading stag1.5.

GRUB loading, please wait...

und dann folgt nur noch ein lustig blinkender Curser mit dessen Hilfe ich allerdings keine eingabe machen kann.

ich hoffe irgendwer kann mir sagen was ich machen muss um die Kiste wieder booten zu können.

Vorab schon mal Danke
 
grub

Hallo


Bei der Suse (CD/DVD) gibt als Bootoption booten einen installierten systems.

Mach das und dann schreibst du grub noch mal in den MBR /dev/hda der 1. Platte.
Danach solltest du ein Bootmenü bekommen.

mfg
schwedenmann
 
-->Bei der Suse (CD/DVD) gibt als Bootoption booten einen installierten systems.
OK soweit bin ich jetzt schon m:) al


-->Mach das und dann schreibst du grub noch mal in den MBR /dev/hda der 1. Platte.
auch wenn die Frage vielleicht dumm klingt, wie genau geht das.
 
grub in den MBR schreiben

Hallo

auch wenn die Frage vielleicht dumm klingt, wie genau geht das.

1. per yast, da kann man auch den Bootloader in den MBR (/dev/hda) schreiben

2. öffne ein Terminal, werde mit su (returntaste drücken) Rootpaßwort, Root, danach
grub-install /dev/hda

mfg
schwedenmann
 
Hallo schwedenmann,

Also ich hab gemacht was du mir gesagt hast, aber leider hatte das keinerlei effeckt.

ich bekomme beim booten ohne CD immer noch die selbe Meldung.

kann das an noch irgendwas liegen???
 
Wenn es eine frische Installation ist würde ich einfach nochmal neu installieren.
Die Fehlersuche per Forum könnte länger dauern als eine Neuinstallation.
 
Grub

Halo

Ev. solltest du nach dem Booten pr CD grub nativ installieren

siehe dazu das grub Manual
3.2 Installing GRUB natively

Caution: Installing GRUB's stage1 in this manner will erase the normal boot-sector used by an OS.

GRUB can currently boot GNU Mach, Linux, FreeBSD, NetBSD, and OpenBSD directly, so using it on a boot sector (the first sector of a partition) should be okay. But generally, it would be a good idea to back up the first sector of the partition on which you are installing GRUB's stage1. This isn't as important if you are installing GRUB on the first sector of a hard disk, since it's easy to reinitialize it (e.g. by running `FDISK /MBR' from DOS).

If you decide to install GRUB in the native environment, which is definitely desirable, you'll need to create a GRUB boot disk, and reboot your computer with it. Otherwise, see Installing GRUB using grub-install.

Once started, GRUB will show the command-line interface (see Command-line interface). First, set the GRUB's root device4 to the partition containing the boot directory, like this:

grub> root (hd0,0)

If you are not sure which partition actually holds this directory, use the command find (see find), like this:

grub> find /boot/grub/stage1

This will search for the file name /boot/grub/stage1 and show the devices which contain the file.

Once you've set the root device correctly, run the command setup (see setup):

grub> setup (hd0)

This command will install the GRUB boot loader on the Master Boot Record (MBR) of the first drive. If you want to put GRUB into the boot sector of a partition instead of putting it in the MBR, specify the partition into which you want to install GRUB:

grub> setup (hd0,0)

If you install GRUB into a partition or a drive other than the first one, you must chain-load GRUB from another boot loader. Refer to the manual for the boot loader to know how to chain-load GRUB.

After using the setup command, you will boot into GRUB without the GRUB floppy. See the chapter Booting to find out how to boot your operating systems from GRUB.

mfg
schwedenmann
 
Hallo

oder was auch möglich ist:
* SUSE CD booten
* [Installation] -> Sprache wählen-> "lizenz" -> [Andere] ->"Reparatur des bestehenden Systems" -> [Automatische Reparatur]

das bestehende System reparieren ;)

Gruß Lumpi
 
Ok leute langsam verzweifle ich.

Ich hab eure Vorschläge jetz alle ausprobiert, aber das Resultat ist immer das selbe.

Darum die Frage, wie kann ich linux komplett von der Platte Schmeißen, also incl. Bootloader
 

Ähnliche Themen

(GELÖST) Hilfe Grub!!!!!

GRUB Error 22 bei Boot von Debian Sarge

Hilfe

Zurück
Oben