Intel PRO/Wireless 2200BG || schaf es nicht einzurichten !

G

gamblar

Grünschnabel
Hallo
ich bin langsam am verzweifeln ich weiss einfach nicht mehr was ich machen soll
ich will nach der howto http://de.gentoo-wiki.com/Ipw2200 mein wlan bereit stellen aber ich schaff es nicht =( ich kann kein ipw2200 emergen

Code:
emerge -av ipw2200

These are the packages that would be merged, in order:

Calculating dependencies   
emerge: there are no ebuilds to satisfy "ipw2200".

aber eigentlich hab ich ja ne ipw2200

Code:
dmesg | grep Wireles
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection

na ja ich habs dann mal mit ipw2100 probiert aber da klappt dann das net-wireless/ieee80211-1.1.13-r1 nicht
Code:
>>> Emerging (1 of 3) net-wireless/ieee80211-1.1.13-r1 to /
 * ieee80211-1.1.13.tgz MD5 ;-) ...                                       [ ok ]
 * ieee80211-1.1.13.tgz RMD160 ;-) ...                                    [ ok ]
 * ieee80211-1.1.13.tgz SHA1 ;-) ...                                      [ ok ]
 * ieee80211-1.1.13.tgz SHA256 ;-) ...                                    [ ok ]
 * ieee80211-1.1.13.tgz size ;-) ...                                      [ ok ]
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                     [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking ieee80211-1.1.13.tgz ;-) ...                                  [ ok ]
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found sources for kernel version:
 *     2.6.17-gentoo-r8
 * Checking for suitable kernel configuration options...
 *   ieee80211-1.1.13 requires the in-kernel version of the IEEE802.11 subsystem to be disabled (CONFIG_IEEE80211)
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 * Once you have satisfied these options, please try merging
 * this package again.

!!! ERROR: net-wireless/ieee80211-1.1.13-r1 failed.
Call stack:
  ebuild.sh, line 1562:   Called dyn_setup
  ebuild.sh, line 665:   Called pkg_setup
  ieee80211-1.1.13-r1.ebuild, line 37:   Called linux-mod_pkg_setup
  linux-mod.eclass, line 432:   Called linux-info_pkg_setup
  linux-info.eclass, line 572:   Called check_extra_config
  linux-info.eclass, line 471:   Called die

!!! Incorrect kernel configuration options
!!! If you need support, post the topmost build error, and the call stack if relevant.

aber im kernel hab ich jetzt ieee80211 extra ausgemacht und es klapt trozdem noch nicht

lspci:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:01.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)


ich hab linux-2.6.17-gentoo-r8

ich hoffe es kann mir jemand helfen und mir sagen was ich machen kann/soll =(
 
Ich weiß ja nicht wies bei Gentoo ist, aber bei Debian und co. musst du die (proprietäre) Firmware von http://ipw2200.sf.net ebenfalls runterladen und in /lib/firmware entpacken. Vielleicht klappt es ja dann.
 
alles klar das Problem wurde gelöst, der Drizzt_DoUrden war hier und hat sichs mal angeschaut er hat aber lustigerweise nicht viel anderst gemacht als ich nur das es bei ihm hald einfach geklappt hat und bei mir nicht ( par sachen von hand gelöscht usw. )

danke trotzdem für die hilfe =)
 

Ähnliche Themen

xrandr: cant open display

kein Sound bei sämtlichen Distributionen...

Asus U30sd + Arch + Alsa...

Cent OS 6.3 - Intel audio controller: Zu langsam und zu tief

HDMI Audio macht Probleme

Zurück
Oben