H
herkules
Grünschnabel
Hallo Board gemeinde
Bitte vergebt mir wenn dieses anliegen schonmal beschrieben worden ist
Ich möchte nicht die Hoffnung aufgeben,daher auch mal hier eine Anfrage zu meinem problem
Seit gestern habe ich per Remote konsole versucht neue updats (pakete zu instalieren ging auch reibungslos über die bühne nach einem neustart aufforderung habe ich seit gestern das problem die kiste bottet nicht mehr bzw.... zu einer gewissen stelle danach ist aber schluss
Ale tore sind dicht... ftp... root usw.... nur durch remote geht noch etwas über die bühne
Ich poste hier mal die Log vieleicht könnt ihr mir ein paar tipps für den weg geben
PXELINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
Booting from local disk...
LILO 22.3.4 boot:
Loading linux..........................
BIOS data check successful
Linux version 2.4.25 (root@rmaster00) (gcc version 3.2) #3 SMP Sun Apr 4 19:32:54 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 IntelR ) @ 0x000f6940
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=linux ro root=303 console=tty0 console=ttyS0,57600
No local APIC present or hardware disabled
Initializing CPU#0
Detected 2399.799 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4784.12 BogoMIPS
Memory: 514248k/524224k available (2126k kernel code, 9592k reserved, 704k data, 140k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
per-CPU timeslice cutoff: 365.74 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 02:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 **********).
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0
with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
keyboard: Timeout - AT keyboard not present
ed)
keyboard: Timeout - AT keyboard not presentf4)
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 11 for device 02:06.0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:53:12:56, IRQ 11.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
PCI: Found IRQ 10 for device 02:07.0
PCI: Sharing IRQ 10 with 02:08.0
eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:53:12:57, IRQ 10.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 4M @ 0xe3000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 Aperture @ 0xe3000000 4MB
[drm] Initialized radeon 1.7.0 20020828 on minor 1
[drm] AGP 0.99 Aperture @ 0xe3000000 4MB
[drm] Initialized i810 1.2.1 20020211 on minor 2
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda
MA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ExcelStor Technology J360, ATA DISK drive
blk: queue c0439220, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 3276
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 140k freed
INIT: version 2.82 booting
System Boot Control: Running /etc/init.d/boot
Mounting /proc filesystem done
Mounting /dev/pts done
Boot logging started on /dev/ttyS0(/dev/console) at Fri Oct 27 19:06:28 2006
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module block-major-9
Activating swap-devices in /etc/fstab...
Adding Swap: 514072k swap-space (priority 42) done
Checking file systems...
fsck 1.34 (25-Jul-2003)
/dev/hda3: clean, 138311/7438336 files, 3098495/14870165 blocks
/dev/hda1: recovering journal
/dev/hda1: clean, 36/14056 files, 11355/56196 blocks done
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Mounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda1 on /boot type ext3 (rw) done
Activating remaining swap-devices in /etc/fstab... done
Mounting shared memory FS on /dev/shm done
Loading required kernel modules done
Restore device permissions done
Setting up the CMOS clockmodprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe.old uses obsolete (PF_INET,SOCK_PACKET)
device eth0 entered promiscuous mode
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
request_module[ppp0]: fork failed, errno 1
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
request_module[ppp0]: fork failed, errno 1
done
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
Setting up timezone data done
Setting scheduling timeslices unused
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
Setting up hostname 'linux'/etc/init.d/boot.d/S11boot.localnet: line 142: 178 Segmentation fault hostname ${XHOSTNAME%%.*request_module[ppp0]: fork failed, errno 1
}
failed
/etc/init.d/boot.d/S11boot.localnet: line 142: 183 Segmentation fault domainname "$XDOMAINNAME"
Setting up loopback interface request_module[ppp0]: fork failed, errno 1
Bitte vergebt mir wenn dieses anliegen schonmal beschrieben worden ist
Ich möchte nicht die Hoffnung aufgeben,daher auch mal hier eine Anfrage zu meinem problem
Seit gestern habe ich per Remote konsole versucht neue updats (pakete zu instalieren ging auch reibungslos über die bühne nach einem neustart aufforderung habe ich seit gestern das problem die kiste bottet nicht mehr bzw.... zu einer gewissen stelle danach ist aber schluss
Ale tore sind dicht... ftp... root usw.... nur durch remote geht noch etwas über die bühne
Ich poste hier mal die Log vieleicht könnt ihr mir ein paar tipps für den weg geben
PXELINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin
Booting from local disk...
LILO 22.3.4 boot:
Loading linux..........................
BIOS data check successful
Linux version 2.4.25 (root@rmaster00) (gcc version 3.2) #3 SMP Sun Apr 4 19:32:54 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 IntelR ) @ 0x000f6940
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=linux ro root=303 console=tty0 console=ttyS0,57600
No local APIC present or hardware disabled
Initializing CPU#0
Detected 2399.799 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4784.12 BogoMIPS
Memory: 514248k/524224k available (2126k kernel code, 9592k reserved, 704k data, 140k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
per-CPU timeslice cutoff: 365.74 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 02:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 **********).
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0
with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabledkeyboard: Timeout - AT keyboard not present
ed)keyboard: Timeout - AT keyboard not present
f4)ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
PCI: Found IRQ 11 for device 02:06.0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:53:12:56, IRQ 11.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
PCI: Found IRQ 10 for device 02:07.0
PCI: Sharing IRQ 10 with 02:08.0
eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:53:12:57, IRQ 10.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 4M @ 0xe3000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 Aperture @ 0xe3000000 4MB
[drm] Initialized radeon 1.7.0 20020828 on minor 1
[drm] AGP 0.99 Aperture @ 0xe3000000 4MB
[drm] Initialized i810 1.2.1 20020211 on minor 2
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda
MA, hdb:pioide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ExcelStor Technology J360, ATA DISK drive
blk: queue c0439220, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 3276
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 140k freed
INIT: version 2.82 booting
System Boot Control: Running /etc/init.d/boot
Mounting /proc filesystem done
Mounting /dev/pts done
Boot logging started on /dev/ttyS0(/dev/console) at Fri Oct 27 19:06:28 2006
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module block-major-9
Activating swap-devices in /etc/fstab...
Adding Swap: 514072k swap-space (priority 42) done
Checking file systems...
fsck 1.34 (25-Jul-2003)
/dev/hda3: clean, 138311/7438336 files, 3098495/14870165 blocks
/dev/hda1: recovering journal
/dev/hda1: clean, 36/14056 files, 11355/56196 blocks done
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Mounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda1 on /boot type ext3 (rw) done
Activating remaining swap-devices in /etc/fstab... done
Mounting shared memory FS on /dev/shm done
Loading required kernel modules done
Restore device permissions done
Setting up the CMOS clockmodprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe.old uses obsolete (PF_INET,SOCK_PACKET)
device eth0 entered promiscuous mode
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
request_module[ppp0]: fork failed, errno 1
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
request_module[ppp0]: fork failed, errno 1
done
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
Setting up timezone data done
Setting scheduling timeslices unused
modprobe: Note: /etc/modules.conf.local is more recent than /lib/modules/2.4.25/modules.dep
modprobe: modprobe: Can't locate module ppp0
Setting up hostname 'linux'/etc/init.d/boot.d/S11boot.localnet: line 142: 178 Segmentation fault hostname ${XHOSTNAME%%.*request_module[ppp0]: fork failed, errno 1
}
failed
/etc/init.d/boot.d/S11boot.localnet: line 142: 183 Segmentation fault domainname "$XDOMAINNAME"
Setting up loopback interface request_module[ppp0]: fork failed, errno 1
