Moin!
Also, ich habe mir den Treiber" rt2500-1.1.0-b4 gezogen und entpackt.
Danach bin ich wie in"readme" erklärt vorgegangen.
make
make install
Dat hat auch gefunzt.
nur ab hier:
CONFIGURATION:
====================
RT2500 driver can be configured via following interfaces,
i.e. (i)"iwconfig" command, (ii)"iwpriv" command, (iii) configuration
file, (iv) RaConfig2500
i) iwconfig comes with kernel.
ii) iwpriv usage, please refer to file "iwpriv_usage.txt" for details.
iii)copy configuration file "RT2500STA.dat" to
/etc/Wireless/RT2500STA/RT2500STA.dat.
Please refer to syntax descriptions below for details.
iv) RT2500 provides API : RaConfig2500, please go to directory
./Utility and refer to how-to-compile.txt
Configuration File : RT2500STA.dat
# Copy this file to /etc/Wireless/RT2500STA/RT2500STA.dat
# This file is a binary file and will be read on loading rt2500.o
# module.
#
# Use "vi -b RT2500STA.dat" to modify settings according to your need.
#
# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise
# using as Infrastructure-mode.
# 2.) set Channel to "0" for auto-select on Infrastructure mode.
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "OPEN", "SHARED", "AUTO", "WPAPSK", "WPANONE".
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES".
#
# When editing the file, make sure the filesize does not exceed 1024
# Bytes (1kb).
# Anything stored beyond the 1024 bte limit will be ignored by the
# driver.
komm ich nicht mehr weiter.
Wäre echt klasse wenn mir da einer helfen könnte.
Gruß Thorsten