Probleme beim anlgen von User unter Samba

P

paralex

Grünschnabel
Komme momentan nicht weiter. Benutze Suse 10.0. Samba wurde einwandfrei installiert, und mit YAST einwanfrei konfiguriert. Paßwortvergabe und sämtliche ander Einstellungen sind mit YAST auch durchgeführt worden.
Nun versuche ich aus der Shell mein Konto für Samba zu aktivieren und bekomme folgende Fehlermeldung:

Linuxserver:/home/paralex # smbpasswd -a paralex
New SMB password:
Retype new SMB password:
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0
Linuxserver:/home/paralex #
Linuxserver:/home/paralex #

Wer kann mir hier weiterhelfen. Komme bei diesem Problem einfach nicht weiter.

Danke.
 
Bin ja auch als rott bzw. superuser angemeldet.
 
Der neue SMB-User existiert aber schon als UnixUser?
 
Wenn bereits ein Home existiert, sollte er bereits Unix-user sein.
 
Das ist ja das merkwürdige. paralex ist ja meim Linux Konto. Wenn cih den Befehl smbpasswd -x paralex ausführe dann löscht er ihn auch erfolgreich bzw. ich füge das ganze mal ein damit ihr es seht:

paralex@Linuxserver:~> su
Password:
Linuxserver:/home/paralex # smbpasswd -x paralex
Deleted user paralex.
Linuxserver:/home/paralex # smbpasswd -a paralex
New SMB password:
Retype new SMB password:
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0
Added user paralex.
Linuxserver:/home/paralex # smbpasswd -e paralex
Enabled user paralex.
Linuxserver:/home/paralex #
 
Und kannste dich anmelden mit deinem Account? Sollte funktionieren da er aktiviert wurde. Was schreibt die Sambalog?
 
Hier mal ein Auszug aus meiner Samba Logadatei. ich hoffe das jemand etwas damit anfangen kann.

Connection reset by peer
[2006/03/03 18:13:08, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/03 18:13:08, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/03 18:13:09, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/03 18:13:09, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/03 18:13:09, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/03 18:13:09, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/04 09:31:11, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/04 09:31:11, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/04 09:31:11, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/04 09:31:11, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/04 09:31:12, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/04 09:31:12, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/04 11:09:23, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/04 11:09:23, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/04 11:09:23, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/04 11:09:23, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/04 11:10:06, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/04 11:10:06, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/04 11:10:06, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/04 11:10:06, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/04 11:15:17, 0] lib/util_sock.c:get_peer_addr(1222)
getpeername failed. Error was Transport endpoint is not connected
[2006/03/04 11:15:17, 0] lib/util_sock.c:get_peer_addr(1222)
getpeername failed. Error was Transport endpoint is not connected
[2006/03/04 11:15:17, 0] lib/util_sock.c:write_data(554)
write_data: write failure in writing to client 0.0.0.0. Error Connection reset by peer
[2006/03/04 11:15:17, 0] lib/util_sock.c:send_smb(762)
Error writing 4 bytes to client. -1. (Connection reset by peer)
[2006/03/04 11:15:18, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:15:18, 0] passdb/pdb_smbpasswd.c:startsmbfilepwent(195)
startsmbfilepwent_internal: file ilona did not exist. File successfully created.
[2006/03/04 11:15:39, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:21:48, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:22:20, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:22:54, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:23:21, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:24:43, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:29:27, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:29:27, 0] rpc_server/srv_netlog_nt.c:get_md4pw(242)
get_md4pw: Workstation PARIS$: no account in domain
[2006/03/04 11:30:43, 0] lib/util_sock.c:read_data(526)
read_data: read failure for 4 bytes to client 169.254.89.2. Error = Connection reset by peer
[2006/03/04 11:30:43, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/04 11:31:25, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/05 13:03:10, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/05 13:03:10, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/05 13:03:10, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/05 13:03:10, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/05 13:03:10, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/05 13:03:10, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/05 16:55:19, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/05 16:55:19, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/05 16:55:19, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/05 16:55:19, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/05 17:01:16, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/05 17:01:16, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/05 17:01:16, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/05 17:01:16, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/05 17:02:41, 0] lib/util_sock.c:write_data(554)
write_data: write failure in writing to client 169.254.89.2. Error Connection reset by peer
[2006/03/05 17:02:41, 0] lib/util_sock.c:send_smb(762)
Error writing 4 bytes to client. -1. (Connection reset by peer)
[2006/03/05 17:02:42, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/05 17:02:42, 0] rpc_server/srv_netlog_nt.c:get_md4pw(242)
get_md4pw: Workstation PARIS$: no account in domain
[2006/03/05 17:03:34, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username paris$ with uid 1002 is not in unix passwd database!
[2006/03/05 17:07:01, 0] lib/util_sock.c:read_data(526)
read_data: read failure for 4 bytes to client 169.254.89.2. Error = Connection reset by peer
[2006/03/05 17:07:02, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username pc-1$ with uid 1001 is not in unix passwd database!
[2006/03/05 17:07:02, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username pc-1$ with uid 1001 is not in unix passwd database!
[2006/03/05 17:07:42, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username pc-1$ with uid 1001 is not in unix passwd database!
[2006/03/05 21:17:17, 1] smbd/service.c:make_connection_snum(662)
linuxserver (169.254.89.1) connect to service users initially as user root (uid=0, gid=0) (pid 17476)
[2006/03/05 21:23:24, 1] smbd/service.c:close_cnum(835)
linuxserver (169.254.89.1) closed connection to service users
[2006/03/06 21:53:42, 0] smbd/server.c:main(806)
smbd version 3.0.20b-3.1-SUSE started.
Copyright Andrew Tridgell and the Samba Team 1992-2005
[2006/03/06 21:53:42, 1] param/loadparm.c:lp_do_parameter(3405)
WARNING: The "printer admin" option is deprecated
[2006/03/06 21:53:43, 0] param/loadparm.c:map_parameter(2650)
Unknown parameter encountered: "net groupmap add ntgroup"
[2006/03/06 21:53:43, 0] param/loadparm.c:lp_do_parameter(3399)
Ignoring unknown parameter "net groupmap add ntgroup"
[2006/03/06 21:53:43, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
[2006/03/06 21:53:41, 0] printing/print_cups.c:cups_cache_reload(85)
Unable to connect to CUPS server localhost - Connection refused
 
Als erstes führe mal auf der Console den Befehl testparm aus. Der zeigt dir die fehlerhaften Einträge in deiner smb.conf auf. Da gibt es einige bei dir. Sind wahrscheinlich Samba-Befehle aus der Version 2, die nicht mehr unter Version 3 existieren. Zweitens scheint deine smbpasswd defekt zu sein oder zumindest fehlerhaft. Du hast außerdem Sambauser die keinen Unixaccount haben, beim PDC ist das aber unbedingt erforderlich. Auch CUPS scheint auch nicht zu funktionieren.
 
@Hellraiser
Werde heute abend erst einmal Testparm ausführen und es hier posten. Wie die Fehler nun da hineinkommen weiß ich nicht. Bin mir aber sicher durch das herumexperemntieren, dass ich da etwas abgeschossen habe. Wie die Samba Befehle aus der Version 2 hineinkommen dafür habe ich keine Erklärung. Habe ja die Original Suse Ditribution dafür verwendet. Mein Frage(n).
- Wie füge ich dem Sambauser einen Unixaccount zu?
- Wie repariere ich mein smbpasswd, bzw. gibt es eine Möglichkeit einen Ursprung herzustellen wie bei einer Neuinstallation bzw. sämtliche Werte rückzusetzen?
_____________________________________________________________

Ergebnis von testparm:

Linuxserver:/home/paralex # testparm
Load smb config files from /etc/samba/smb.conf
WARNING: The "printer admin" option is deprecated
Unknown parameter encountered: "net groupmap add ntgroup"
Ignoring unknown parameter "net groupmap add ntgroup"
Processing section "[homes]"
Processing section "[profiles]"
Processing section "[users]"
Processing section "[groups]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[netlogon]"
Processing section "[linux-laufwerke]"
Loaded services file OK.
ERROR: the 'unix password sync' parameter is set and the 'passwd program' () cannot be executed (error was No such file or directory).
ERROR: the 'passwd program' () requires a '%u' parameter.
WARNING: You have some share names that are longer than 12 characters.
These may not be accessible to some older clients.
(Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.)
Server role: ROLE_DOMAIN_PDC
Press enter to see a dump of your service definitions

[global]
workgroup = TUXNET
username map = /etc/samba/smbusers
unix password sync = Yes
time server = Yes
printcap name = cups
add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$
logon script = logon.bat
logon path = \\%L\profiles\.msprofile
logon drive = P:
logon home = \\%L\%U\.9xprofile
domain logons = Yes
os level = 65
preferred master = Yes
domain master = Yes
idmap uid = 10000-20000
idmap gid = 10000-20000
printer admin = @ntadmin, root, administrator
cups options = raw
include = /etc/samba/dhcp.conf

[homes]
read only = No
browseable = No

[profiles]
comment = Network Profiles Service
path = /home/samba-ntprof
read only = No
create mask = 0600
directory mask = 0700
store dos attributes = Yes
browseable = No

[users]
comment = All users
path = /home
read only = No
inherit acls = Yes
veto files = /aquota.user/groups/shares/

[groups]
comment = All groups
path = /home/groups
read only = No
inherit acls = Yes

[printers]
comment = All Printers
path = /var/tmp
create mask = 0600
printable = Yes
browseable = No

[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = @ntadmin, root
force group = ntadmin
create mask = 0664
directory mask = 0775

[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
write list = root
browseable = No

[linux-laufwerke]
comment = Alle Laufwerke des Linux-PC
path = /media
read only = No
inherit acls = Yes
Linuxserver:/home/paralex #
 
Zuletzt bearbeitet:
Code:
WARNING: The "printer admin" option is deprecated
Hast du überhaupt Probleme mit dem Drucken?

Code:
Unknown parameter encountered: "net groupmap add ntgroup"
Ignoring unknown parameter "net groupmap add ntgroup"
Ist nicht weiter schlimm, da er den Parameter ignoriert. Kannst ihn aber auch gleich löschen.

Code:
ERROR: the 'unix password sync' parameter is set and the 'passwd program' () cannot be executed (error was No such file or directory).
ERROR: the 'passwd program' () requires a '%u' parameter.
Die beiden Einträge erklären sich eigentlich von selbst. Die Option unix password sync macht nur Sinn, wenn der Pfad zum passwd stimmt.

Der einfachste Weg nen Unix-User zu erstellen ist useradd. Ich tippe mal das nur vergessen hast für die verschiedenen PC's Maschinenaccounts zu erstellen. Die benötigen auch nen Sambaaccount. Ich muß jetzt erstmal in die Heia, bin hindemüde. Morgen früh schreib ich dir die dafür benötigten Befehle auf.
 
Zuletzt bearbeitet:
Habe nun ein wenig die globalen Einsetllungen geändert und beim Ausführen von testparm bekomme ich nun folgende Meldung:


Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[profiles]"
Processing section "[users]"
Processing section "[groups]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[netlogon]"
Processing section "[drives]"
Loaded services file OK.
Server role: ROLE_DOMAIN_PDC
Press enter to see a dump of your service definitions

[global]
workgroup = TUXNET
time server = Yes
add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$
logon script = logon.bat
logon path = \\%L\profiles\%u\%m
logon drive = H:
logon home = \\%L\%u\.win_profile\%m
domain logons = Yes
os level = 65
preferred master = Yes
domain master = Yes

[homes]
read only = No
browseable = No

[profiles]
comment = Network Profiles Service
path = /home/samba-ntprof
read only = No
create mask = 0600
directory mask = 0700
store dos attributes = Yes
browseable = No

[users]
comment = All users
path = /home
read only = No
inherit acls = Yes
veto files = /aquota.user/groups/shares/

[groups]
comment = All groups
path = /home/groups
read only = No
inherit acls = Yes

[printers]
comment = All Printers
path = /var/tmp
create mask = 0600
printable = Yes
browseable = No

[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = @ntadmin, root
force group = ntadmin
create mask = 0664
directory mask = 0775

[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
write list = root
browseable = No

[drives]
comment = Alle Laufwerke des Linuxservers
path = /media
read only = No
inherit acls = Yes
Das sieht ja schon einmal ganz gut aus oder sehe ich das falsch?

Die Logadtei sagt mir jedoch folgedes wenn ich versuche mein Windoof XP Rechner in die Domän einzubinden:

[2006/03/07 23:32:41, 0] passdb/pdb_smbpasswd.c:build_sam_account(1205)
build_sam_account: smbpasswd database is corrupt! username pc-1$ with uid 1001 is not in unix passwd database!

Den Namen von pc-1$ war mal, als ich noch experememntiert habe. Danach habe ich den ja auch wieder gelöscht nur irgendwie oder irgendwo hat er ihn noch. Der Knackpunkt ist meiner Meinung nach das noch die Database korrupt ist. Wie kann man diese reparieren oder sogar neu herstelen. Wenn ich versuche mich in windows in meien Tuxdomäne einzubindne meckert Windows mit der Meldung das der benutzer nicht angelegt ist, obwohl ich das ja der Fall ist, sowohl als Linuxkonto und als Sambazugang.

So gehe jetzt auch in die Hajabubu. Ist auch schon ziemlcih spät. Wünsche allen süße Träume. ;(
 
Ich würd an deiner Stelle nen Maschinenaccount für pc-1 erstellen oder den aus Samba löschen. Beides dürfte zum gleichen Ergebnis führen. Nur wenn du den Account löscht kann dieser PC sich definitiv nicht mehr anmelden.
 
nachdem ich gestern noch den Maschinenacount aktiviert habe mit smbpasswd -e paralex$, konnte ich mich unter paralex in Windows in die Domäne einbinden. Versuche ich jetzt mich jetzt mit paralex unter Windows anzumelden, sagt er mir das er die Domäne nicht finden kann. Ich werde mal ein wenig rumexperementieren.
Den pc-1$ hatte ich schon vorher gelöscht sowohl als Linuxuser (Linuxkonto) als auch als Sambauser und deshalb wundert es mich das Samba es immer noch moniert.
Habe die Hoffnung noch nicht verloren, da ja die testparm soweit gut aussieht.

Gruß
 
Normalerweise kann nur root einen Client in die Domäne einbinden. Außerdem hast du $ hinten drangehängt, dadurch erstellst du einen Maschinenaccount.
 
Mein Windowsrechner heißt ja auch paralex. Das meinte ich damit. Ansonsten natürlich mit root und dem Sambapasswort.
Mein Linuxrechner hat ja den mashienenaccount paralex$ erstellt und den habe ich dann ja mit smbpasswd -e paralex$ für Samba auch zugänglich gemacht. Ich weiß jetzt natürlich nicht ob das notwendig ist oder nicht und ob es danach Zufall war dar er danach paralex unter Windows in die Domäne aufgenommen hat. Trotz all dem sagt mir die Windowsanmeldung das er die Domäne nicht finden kann, ganz gleichgültig ob ich mich als paralex oder als root versuche anzumelden. Werde heute abend mal die Firewalls abstellen. Es kan ja vermutlich auch daran liegen. Glaube ich zwar nicht aber zumindest hätte ich eine Fehlerquelle ausgeschlossen.

15.03.2006:
========

Nachdem ich jetzt den eien Fehler behoben habe bekomme ich nachdem ich testparm ausführe fogende Fehlermeldung:

Load smb config files from /etc/samba/smb.conf
Processing section "[homes]"
Processing section "[profiles]"
Processing section "[users]"
Processing section "[groups]"
Processing section "[print$]"
Processing section "[netlogon]"
Processing section "[drives]"
Loaded services file OK.
WARNING: passdb expand explicit = yes is deprecated
Server role: ROLE_DOMAIN_PDC
Press enter to see a dump of your service definitions

[global]
workgroup = TUXNET
time server = Yes
add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$
logon script = logon.bat
logon path = \\%L\profiles\%u\%m
logon drive = H:
logon home = \\%L\%u\.win_profile\%m
domain logons = Yes
os level = 65
preferred master = Yes
domain master = Yes

[homes]
read only = No
browseable = No

[profiles]
comment = Network Profiles Service
path = /home/samba-ntprof
read only = No
create mask = 0600
directory mask = 0700
store dos attributes = Yes
browseable = No

[users]
comment = All users
path = /home
read only = No
inherit acls = Yes
veto files = /aquota.user/groups/shares/

[groups]
comment = All groups
path = /home/groups
read only = No
inherit acls = Yes

[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = @ntadmin, root
force group = ntadmin
create mask = 0664
directory mask = 0775

[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
write list = root
browseable = No

[drives]
comment = Alle Laufwerke des Linuxservers
path = /media
read only = No
inherit acls = Yes
Weiß jemand wie man diesen Fehler beheben kann? Danke für eure Hilfe im voraus.
 
Zuletzt bearbeitet:

Ähnliche Themen

Samba 3.6.25 - OpenLDAP Setup

Zugriff Ubuntu 16.04. auf Freigabe 18.04. LTS nicht möglich

Samba 4 Gast Zugang unter Ubuntu funktioniert nicht

Windows clients können nicht mehr auf lange laufendes System zugreifen

Falsche Rechte gesetzt beim Anlegen von Ordnern via Samba-Client

Zurück
Oben