wpa_supplicant

Dieses Thema im Forum "SuSE / OpenSuSE" wurde erstellt von tux_rules, 25.05.2007.

  1. #1 tux_rules, 25.05.2007
    tux_rules

    tux_rules Eroberer

    Dabei seit:
    19.04.2007
    Beiträge:
    63
    Zustimmungen:
    0
    Ort:
    Wien
    Sorry ich weis das schon viele Themen drinnen sind und ich hab sie mir auch schon angeschaut und ausprobiert. aber ich glaub das ich den fehler gefunden habe.

    Mein Problem ist das in der wpa_supplicant muss ich ja das eintragen (ctrl_interface=/var/run/wpa_supplicant) nur wenn ich dann in das Verzeichnis gehe hab ich das wpa_supplicant nicht. was gehört da hinein?

    Ich hab die Open Suse 10.2

    Mit freundlichen Grüßen

    Martin
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 Bâshgob, 25.05.2007
    Bâshgob

    Bâshgob freies Radikal

    Dabei seit:
    29.07.2004
    Beiträge:
    2.334
    Zustimmungen:
    0
    Ort:
    Hannover
    /var/run/wpa_supplicant existiert erst wenn wpa_supplicant (die Anwendung) läuft; in die /var/run/wpa_supplicant schreibt wpa_supplicant Daten über seinen Zustand, diese lassen sich via wpa_cli auslesen.
     
  4. #3 tux_rules, 25.05.2007
    tux_rules

    tux_rules Eroberer

    Dabei seit:
    19.04.2007
    Beiträge:
    63
    Zustimmungen:
    0
    Ort:
    Wien
    wenn ich wpa_supplicant ausführe kommt die ganzezei ganze zeit das. könnt ihr da was rauslesen wo der fehler ist? (wpa_supplicant -Dndiswrapper -iwlan0 -c/etc/wpa_supplicant.conf -dd)


    Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper' ctrl_interface 'N/A'
    Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
    Reading configuration file '/etc/wpa_supplicant.conf'
    ctrl_interface='/var/run/wpa_supplicant'
    eapol_version=1
    Line: 3 - start of a new network block
    ssid - hexdump_ascii(len=7):
    61 72 72 61 6b 69 73 arrakis
    scan_ssid=1 (0x1)
    priority=5 (0x5)
    proto: 0x1
    key_mgmt: 0x2
    pairwise: 0x18
    group: 0x1e
    PSK - hexdump(len=32): [REMOVED]
    Priority group 5
    id=0 ssid='arrakis'
    Initializing interface (2) 'wlan0'
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: KEY_RX entering state NO_KEY_RECEIVE
    EAPOL: SUPP_BE entering state INITIALIZE
    EAP: EAP entering state DISABLED
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf
    capabilities: key_mgmt 0xf enc 0xf
    Own MAC address: 00:17:3f:28:a0:ee
    Driver does not support WPA.
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    Setting scan request: 0 sec 100000 usec
    Added interface wlan0
    Wireless event: cmd=0x8b06 len=8
    State: DISCONNECTED -> SCANNING
    Starting AP scan (specific SSID)
    Scan SSID - hexdump_ascii(len=7):
    61 72 72 61 6b 69 73 arrakis
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Authentication with 00:00:00:00:00:00 timed out.
    Added BSSID 00:00:00:00:00:00 into blacklist
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 2
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (specific SSID)
    Scan SSID - hexdump_ascii(len=7):
    61 72 72 61 6b 69 73 arrakis
    Scan timeout - try to get results
    Received 524 bytes of scan results (2 BSSes)
    Scan results: 2
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 3
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 4
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (specific SSID)
    Scan SSID - hexdump_ascii(len=7):
    61 72 72 61 6b 69 73 arrakis
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 5
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    Authentication with 00:00:00:00:00:00 timed out.
    BSSID 00:00:00:00:00:00 blacklist count incremented to 6
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Setting scan request: 0 sec 0 usec
    State: DISCONNECTED -> SCANNING
    Starting AP scan (specific SSID)
    Scan SSID - hexdump_ascii(len=7):
    61 72 72 61 6b 69 73 arrakis
    Scan timeout - try to get results
    Received 682 bytes of scan results (3 BSSes)
    Scan results: 3
    Selecting BSS from priority group 5
    0: 00:18:4d:89:31:c6 ssid='arrakis' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
    selected based on WPA IE
    Trying to associate with 00:18:4d:89:31:c6 (SSID='arrakis' freq=2452 MHz)
    Cancelling scan request
    WPA: clearing own WPA/RSN IE
    Automatic auth_alg selection: 0x1
    WPA: using IEEE 802.11i/D3.0
    WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
    WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    WPA: clearing AP RSN IE
    WPA: using GTK TKIP
    WPA: using PTK TKIP
    WPA: using KEY_MGMT WPA-PSK
    WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
    No keys have been configured - skip key clearing
    State: SCANNING -> ASSOCIATING
    Association request to the driver failed
    Setting authentication timeout: 5 sec 0 usec
    EAPOL: External notification - EAP success=0
    EAPOL: External notification - EAP fail=0
    EAPOL: External notification - portControl=Auto
    CTRL-EVENT-TERMINATING - signal 2 received
    Removing interface wlan0
    State: ASSOCIATING -> DISCONNECTED
    No keys have been configured - skip key clearing
    EAPOL: External notification - portEnabled=0
    EAPOL: External notification - portValid=0
    Failed to disable WPA in the driver.
    No keys have been configured - skip key clearing
    Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
    Cancelling scan request
     
  5. #4 Bâshgob, 25.05.2007
    Zuletzt bearbeitet: 25.05.2007
    Bâshgob

    Bâshgob freies Radikal

    Dabei seit:
    29.07.2004
    Beiträge:
    2.334
    Zustimmungen:
    0
    Ort:
    Hannover
    Könnte schwierig werden ohne genaue Kenntnis deiner Konfiguration. Wie ist dein AP Verschlüsselungsmäßig konfiguriert und wie sieht deine wpa_supplicant.conf aus?

    Hast du einen Radiusserver oder ähnliches? Oder welchen Grund hast du EAP nutzen zu wollen?
     
  6. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
Thema: wpa_supplicant
Besucher kamen mit folgenden Suchen
  1. ubuntu intel 2200bg association request to the driver failed

Die Seite wird geladen...

wpa_supplicant - Ähnliche Themen

  1. wpa_supplicant Problem gentoo

    wpa_supplicant Problem gentoo: Moin, nach langem gefriggel läuft meine wlan karte schon fast, nur noch ein prob. mit der wpa_supplicant, ich hoffe allerdings das ihr mir hier...
  2. wpa_supplicant PEAP problem

    wpa_supplicant PEAP problem: Hallo, ich habe meinen Laptop paar wochen nicht benutzt und habe Jetzt Linux neu installiert. Jedoch läuft W-Lan in der Uni nicht, bei mir...
  3. wpa_supplicant: Fehler bei Initialisierung mit Bootscripts /etc/init.d/net.ath0 start

    wpa_supplicant: Fehler bei Initialisierung mit Bootscripts /etc/init.d/net.ath0 start: Hallo zusammen, ich bin gerade dabei, unter Gentoo mein WLAN einzurichten. Ich habe eine Ubiquiti SRC mit Atheros Chipsatz. Die madwifi-Treiber...
  4. Ubuntu 8.10 - Problem: Wlan mit WPA (wpa_supplicant)

    Ubuntu 8.10 - Problem: Wlan mit WPA (wpa_supplicant): Hallo Zusammen, ich versuche gerade eine WLAN-Verbindung von meinem Samsung P35 (Intel 2200BG Netzwerkkarte) zum Router (Speedport W700V)...
  5. problem mit wpa_supplicant?

    problem mit wpa_supplicant?: hi, mein wpa_supplicant unter ubuntu hardy macht zicken, und ich finde den fehler nicht. ich hab hier mal nen mitschnitt von wpa_supplicant...