VirtualBox rpm.run

Maggie

Maggie

Mitglied
Hi, ich wollte vor ein paar Tage VirtualBox installieren. Ich habe noch nie mit Shell-Skript gehabt. Mit Google habe ich folgendes gefunden:
http://www.easylinux.de/pipermail/suse/2007-April/021411.html
http://www.linux-forum.de/showthread.php?t=4667
Ich habe in der Konsole mit sh und chmod +x folgendes Ergebnis gekriegt:
linux-hjya:/home/maggie # sh VirtualBox-1.3.8_openSUSE102-2.i586.rpm.run
VirtualBox 1.3.8 self-extracting Binary

VirtualBox Personal Use and Evaluation License (PUEL)

Version 1.1, 2007-01-07

InnoTek Systemberatung GmbH, Werkstrasse 24, 71384 Weinstadt,
Germany grants you the right to use the software product as defined
in 1. according to the following provisions. If you do not agree
to all conditions set forth by this license, you may not use the
product, because only InnoTek as the product's owner can give
you permission to use it.

1. SUBJECT OF LICENSE. "Product", as referred to in this License,
shall be the binary software package "VirtualBox", which allows for
creating multiple virtual computers, each with different operating
systems ("Guest Computers"), on a physical computer with a specific
operating system ("Host Computer"), to allow for installing and
executing these Guest Computers simultaneously. The Product consists
of executable files in machine code for the Windows 2000/XP and Linux
operating systems as well as other data files as required by the
executable files at run-time and documentation in electronic form.

2. GRANT OF LICENSE. InnoTek grants you a personal right to install
and execute the Product on a Host Computer for Personal Use or
Educational Use or for Evaluation. "Personal Use" requires that you
use the product on the same Host Computer where you installed it
yourself and that no more than one client connect to Guest Computers
on that Host Computer remotely at a time. "Educational use" is any
use in an academic institution (schools, colleges and universities,
by teachers and students). "Evaluation" means testing the product for
a reasonable period (that is, normally for a few weeks); after expiry
of that term, you are no longer permitted to evaluate the Product.

3. RESERVATION OF RIGHTS. Any use beyond the provisions of 2. is
prohibited. InnoTek reserves all copyrights and other intellectual
property rights. This includes, but is not limited to, the right to
modify, make available or public, rent out, lease, lend or otherwise
distribute the Product. This does not apply as far as applicable
law may require it or InnoTek grants you additional rights of use
in a separate license in writing.

4. TERMINATION. This License shall be valid infinitely. InnoTek may
terminate the License only for material causes. In particular, such
a material cause can be a violation of the usage terms or a breach
of other essential duties from this contract. After termination,
you are required to delete and destroy all remaining copies of the
Product. This includes, but is not limited to, installed copies
and backups.

5. NO WARRANTIES. Since you have not paid for the use of the Product,
there is no warranty for it, to the extent permitted by applicable
law. InnoTek provides the Product "as is" without warranty of any
kind, either expressed or implied, including, but not limited to, the
implied warranties of merchantability and fitness for a particular
purpose. The entire risk as to the quality and performance of the
Product is with you. Should it prove defective, you assume the cost
of all necessary servicing, repair, or correction. In addition,
InnoTek shall be allowed to provide updates to the Product in
urgent cases. You are then obliged to install such updates. Such
an urgent case includes, but is not limited to, a claim of rights
to the Product by a third party.

6. MISCELLANEOUS. There are no license terms beyond the written
ones in this agreement. Amendments of, additions to and the joint
revocation of this agreement shall require the written form. The same
shall apply to the preceding written form requirement. Standard
business conditions of the parties shall not apply. Place of
performance and legal venue shall be Weinstadt, the domicile of
InnoTek. Solely German law shall apply to this agreement.


Do you agree to the above license terms? [yes or no] yes

tail: „VirtualBox-1.3.8_openSUSE102-2.i586.rpm.run“ kann nicht zum Lesen geöffnet werden: Datei oder Verzeichnis nicht gefunden

gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Fehler beim Beenden, verursacht durch vorhergehende Fehler.
linux-hjya:/home/maggie # chmod +x VirtualBox-1.3.8_openSUSE102-2.i586.rpm.run
chmod: Zugriff auf „VirtualBox-1.3.8_openSUSE102-2.i586.rpm.run“ nicht möglich: Datei oder Verzeichnis nicht gefunden
Was mache ich falsch? Wo soll ich Tipps suchen? Kann mir jemand helfen?
 
Ich würde sagen das File is defekt, denn bei mir kommt folgendes:

Code:
Do you agree to the above license terms? [yes or no] yes


Archive successfully extracted.
  rpm -i VirtualBox-1.3.8_openSUSE102-2.i586.rpm (install)

Danach mußt du nur noch mit rpm -i VirtualBox-1.3.8_openSUSE102-2.i586.rpm installieren ...


Lade es doch nochmal runter und probier es mit der "neuen" Datei ...
 
Devilz, danke, hast Recht gehabt. Ich habe die Datei neu runter geladen und bin schon ein Stück weiter, leider bekomme schon wieder ein Fehlermeldung:
Do you agree to the above license terms? [yes or no] yes


Archive successfully extracted.
rpm -i VirtualBox-1.3.8_openSUSE102-2.i586.rpm (install)

linux-hjya:/home/malgosia # rpm -i VirtualBox-1.3.8_openSUSE102-2.i586.rpm
error: Failed dependencies:
libxalan-c.so.110 is needed by VirtualBox-1.3.8_openSUSE102-2.i586
libxerces-c.so.27 is needed by VirtualBox-1.3.8_openSUSE102-2.i586
http://www.virtualbox.org/wiki/Downloads
Hier steht was, aber ich traue mich nicht, allein weiter zu machen. Als ich versuchte mal allein Beryl zu installieren, war meine Grafikkarte total zerstört. Seit dem bin ich vorsichtig geworden. Was soll ich machen? Ich denke, ich bin nicht die einzige, die dieses Problem hat, es kann auch anderen helfen. Danke nochmal für so schnelle Hilfe.
 
Suche Dir mal in YaST bzw. smart die Pakete 'Xalan-c' und 'Xerces-c' und installiere sie, dann sollte diese Fehlermeldung nicht mehr auftreten.
 
Ich habe mit YaST zuerst Xalan-c instaliert. Aber hab auch Xalan-c devel gefunden. Soll ich das auch installieren? Und noch eine Frage: natürlich muss ich danach VirtualBox nochmal installieren, oder? Danke für Eure Mühe, ich bin wirklich begeistet.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.

Na toll. Ich habe schon wieder eine Meldung gekriegt und weiss ich nicht, was das bedeutet.
Archive successfully extracted.
rpm -i VirtualBox-1.3.8_openSUSE102-2.i586.rpm (install)

linux-hjya:/home/maggie # rpm -i VirtualBox-1.3.8_openSUSE102-2.i586.rpm

Creating group 'vboxusers'. VM users must be member of that group!

No precompiled module for this kernel found -- trying to build one. Messages
emitted during module compilation will be logged to /var/log/vbox-install.log.

Compilation of the kernel module FAILED! VirtualBox will not start until this
problem is fixed. Please consult /var/log/vbox-install.log to find out why the
kernel module does not compile. Most probably the kernel sources are not found.
Install them and execute

/etc/init.d/vboxdrv setup

as root.
Hi, noch einmal ich. Ich habe VirtualBox gefunden, noch nicht probiert, ob alles funktioniert. Ich habe ihm in usr/bin/VirtualBox gefunden.
 
Zuletzt bearbeitet:
Suche mal in Yast nach den Kernelsourcen,die werden von VM's immer benötigt.
Und nicht vergessen Dich in die Gruppe 'vboxusers' einzutragen.
 
Leider kenne ich mich mit VirtualBox garnicht aus, aber die Fehlermeldung gibt Dir schon einen Tipp:

Code:
Please consult /var/log/vbox-install.log to find out why the
kernel module does not compile.

Kurz: ein Kernelmodul sollte gebaut werden, das hat nicht hingehauen, und eventuelle Gründe stehen in /var/log/vbox-install.log. Am besten, Du postet diese Datei mal hier (z.B. als Anhang, wenn diese Datei etwas länger sein sollte, oder in #code-tags#, wenn sie nicht so lang ist. Beides erreichst Du, wenn Du beim posten auf 'Erweitert' gehst).

Ach ja, die devel-Pakete würde ich auf Verdacht mitinstallieren, denn die jeweiligen Pakete scheinen bei der Installation ja direkt einkompiliert werden zu müssen (und dafür benötigt man devels).

Hast Du 'Xerces-c' auch installiert?
 
Hi, ich habe Xalan-c und Xerces-c installiert. Die beide devel werde gleich nachinstallieren, befor ich vergesse. Ich wollte in VirtualBox Kubuntu installieren( soll ich die Festplatte ankreutzen??) und habe ich folgendes erfahren:

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

In der Konsole- wie beschrieben- habe ich brav /etc/init.d usw eingetragen. Kommt folgendes:
linux-hjya:/home/maggie # /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module done
Recompiling VirtualBox kernel module failed
(Look at /var/log/vbox-install.log to find out what went wrong)
Warum immer ich???
Und nicht vergessen Dich in die Gruppe 'vboxusers' einzutragen.
Das muss ich noch üben...
 
Zuletzt bearbeitet:
Code:
/var/log/vbox-install.log
Makefile:88: *** Error: unable to find the include directory for your current Linux kernel. Specify ERN_INCL=<directory> and run Make again.. Stop.
 
Sind die Kernelsourcen denn jetzt installiert?
Suse-Anwender helft mal:Wie heißen die denn genau unter Suse?:think:
 
Gleich, ich muss kleine Pause machen :D Ich sitze hier schon fast 24 Stunden. Gleich 8)
.
.
.
EDIT (autom. Beitragszusammenführung) :
.

Kernel-souce habe ich schon installiert. Kommt mir bekannt vor:

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
Vielleicht kann dieser Artikel uns weiter helfen, weil dort ein Bild ist (mit Fehlermeldung), was ich schon bei mir gesehen habe.Kann mir jemand weiter helfen?
http://www.pro-linux.de/berichte/virtualbox.html#ToC3


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Passt etwas nicht...
Ich sehe, bin nicht die einzige...
http://www.virtualbox.org/discussion/2/595
Leider, ich habe dort keine Antwort gefunden.


In der Konsole:
@linux-hjya:~> VirtualBox
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (2.6.18.8-0.1-default) or it failed to
load. Please recompile the kernel module and install it by

sudo /etc/init.d/vboxdrv setup

You will not be able to start VMs until this problem is fixed.
WARNING: The compilation of the vboxdrv.ko kernel module failed during the
installation for some reason. Starting a VM will not be possible.
Please consult the User Manual for build instructions.
Wie kann ich fehlende Module installieren?
.
.
.
EDIT (autom. Beitragszusammenführung) :
.

http://www.pro-linux.de/berichte/virtualbox.html#ToC3
Hier ist ein Bild mit Fehlermeldung. Ich habe das schon bei mir gesehen.
 
Zuletzt bearbeitet:
Suche Dir mal in YaST bzw. smart die Pakete 'Xalan-c' und 'Xerces-c' und installiere sie, dann sollte diese Fehlermeldung nicht mehr auftreten.

Danach ebenfalls über YaST noch alles von GCC (Compiler) installieren.

Den User der VBox aufführen will in die Gruppe mit aufnehmen und dann
im Shell :

linuxkiste:# /etc/init.d/vboxdrv setup

Stopping VirtualBox kernel module done
Recompiling VirtualBox kernel module done
Starting VirtualBox kernel module done

FERDISCH !
 
Hallo,

ich habe leider das gleiche Problem. Bekomme es nicht hin!

In meiner vbox-install.log steht folgendes:

cp: missing estination file operand after '/tmp/vbox.5/Module.symvers'
Try 'cp --help' for more information.
Makefile:88: *** Error: unable to find the include directory for your corrent Linux kernel. Specify KERN_INCL=<directory> a

Hat einer eine Ahnung was ich vergessen habe oder was falsch ist?
.
.
.
EDIT (autom. Beitragszusammenführung) :
.

hmm Linux Header und der kernel waren nicht zusammen kompatibel. was so ein kleiner Versionsunterschied ausmachen kann...
 
Zuletzt bearbeitet:

Ähnliche Themen

Nginx als Reverse Proxy für Nextcloud und Emby

Zugriff Ubuntu 16.04. auf Freigabe 18.04. LTS nicht möglich

Email via script via Exchange Server (SASL)

Samba-Server mit Univention Corporate Server

Senior System & Network Admin in Berlin

Zurück
Oben