Synaptics Scrolling

Dieses Thema im Forum "Mobile / PDA / Notebook" wurde erstellt von hanneshoch3, 11.03.2009.

  1. #1 hanneshoch3, 11.03.2009
    Zuletzt bearbeitet: 11.03.2009
    hanneshoch3

    hanneshoch3 Eroberer

    Dabei seit:
    08.03.2008
    Beiträge:
    50
    Zustimmungen:
    0
    Hallo!
    Ich habe mir ein Dell Vostro 1510 gekauft, das Touchpad funktioniert auch, jedoch kann ich nicht scrollen. KSnypatics und synaptics sind installiert. SHMConfig ist in der xorg.conf auf "on" und der syndaemon kann nicht gestartet werden, Ausgabe ist: Cannot find Display, obwohl X gestartet ist. KSynaptics beschwert sich über die fehlende SHMConfig Einstellung, obwohl sie gesetzt ist.

    Code:
    # File generated by xorgconfig.
    
    #
    # Copyright 2004 The X.Org Foundation
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    #
    
    # **********************************************************************
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # **********************************************************************
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"   # Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the font modules
    #    Load        "type1"
        Load        "freetype"
    #    Load        "xtt"
    
    # This loads the GLX module
        Load       "glx"
    # This loads the DRI module
        Load       "dri"
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
    #    RgbPath    "/usr/share/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    #
    
        FontPath   "/usr/share/fonts/misc/"
    #    FontPath   "/usr/share/fonts/TTF/"
    #    FontPath   "/usr/share/fonts/OTF"
    #    FontPath   "/usr/share/fonts/Type1/"
        FontPath   "/usr/share/fonts/100dpi/"
        FontPath   "/usr/share/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    
    # The module search path.  The default path is shown here.
    
    #    ModulePath "/usr/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option "NoTrapSignals"
    
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    
    #    Option "DontVTSwitch"
    
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option "DontZap"
    
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client.
    
    #    Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    
    #    Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option "AllowNonLocalModInDev"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier  "Keyboard1"
        Driver      "kbd"
    
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option     "Protocol"      "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option     "Xleds"      "1 2 3"
    
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"   "xorg"
        Option "XkbModel"   "pc105"
        Option "XkbLayout"  "de"
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    Identifier "Synaptics Touchpad2
    Driver "synaptics"
    Option "SHMConfig" "on"
    Option "SendCoreEvents" "true"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    EndSection
    
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier  "Mouse1"
        Driver      "mouse"
        Option "Protocol"    "IMPS/2"       # IntelliMouse PS/2
        Option "Device"      "/dev/input/mice"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"  "Xqueue"
    
    # Mouse-speed setting for PS/2 mouse.
    
    #    Option "Resolution"        "256"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"  "9600"
    #    Option "SampleRate"        "150"
    
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    
        Option "ZAxisMapping"   "4 5 6 7"
    
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    
    # **********************************************************************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "My Monitor"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   31.5 - 79.0
    
    #    HorizSync  30-64         # multisync
    #    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 50-90
        DisplaySize 360 270
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset    "generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    
    #    BusID      "PCI:0:10:0"
    
    #    VideoRam   256
    
    #    Clocks     25.2 28.3
    
    EndSection
    
    # Device configured by xorgconfig:
    
    Section "Device"
        Identifier  "onboard"
        Driver      "intel"
        Option      "noddc"
        #VideoRam    131072
        # Insert Clocks lines here if appropriate
    EndSection
    
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "onboard"
        Monitor     "My Monitor"
        DefaultDepth 24
    
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1024x768" "1152x864" "1280x1024"
            ViewPort    0 0
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
        Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    Section "DRI"
        Mode 0666
    EndSection
    
    
    Außerdem würde ich gerne, sobald der WLAN-Schalter aktiviert wird, ein ACPI Event ausgelöst haben, dass das Modul lädt bzw falls der Schalter deaktiviert wird entlädt.


    Kann mir jemand helfen?
    Hannes
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. #2 Pond247, 14.03.2009
    Pond247

    Pond247 Doppel-As

    Dabei seit:
    05.04.2005
    Beiträge:
    141
    Zustimmungen:
    0
    Ort:
    Greifswald
    Also bei mir (Inspiron 1520 mit vertikalem scrollen aktiviert) sieht der entsprechende Abschnitt s aus:
    Code:
    Section "InputDevice"
        Identifier     "TouchPad"
        Driver         "synaptics"
        Option         "Device" "/dev/input/mouse1"
        Option         "Protocol" "auto-dev"
        Option         "LeftEdge" "1700"
        Option         "RightEdge" "5300"
        Option         "TopEdge" "1700"
        Option         "BottomEdge" "4200"
        Option         "FingerLow" "25"
        Option         "FingerHigh" "30"
        Option         "MaxTapTime" "180"
        Option         "MaxTapMove" "220"
        Option         "VertScrollDelta" "100"
        Option         "HorizScrollDelta" "0"
        Option         "MinSpeed" "0.09"
        Option         "MaxSpeed" "0.18"
        Option         "AccelFactor" "0.0015"
        Option         "SHMConfig" "on"
        Option         "TapButton2" "2"
    EndSection
    
    Section "InputDevice"
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/input/mice"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Wobei der untere Teil zum Beispiel eine USB-Maus darstellt. Für horizontales scrollen musst du sicherlich "HorizScrollDelta" "100" setzen. Das willst du aber sicherlich nicht wegen unangenehmer Nebeneffekte bei einigen Programmen...
     
  4. #3 hanneshoch3, 14.03.2009
    hanneshoch3

    hanneshoch3 Eroberer

    Dabei seit:
    08.03.2008
    Beiträge:
    50
    Zustimmungen:
    0
    Hm, das hat nicht geholfen. Ich arbeite jetzt auf xorg-server 1.5.3, vielleicht liegt es ja daran. Aber ich denke, dass das Touchpad einfach zu neu ist und ich auf neue Treiber warten muss...

    MfG

    Hannes
     
Thema:

Synaptics Scrolling

Die Seite wird geladen...

Synaptics Scrolling - Ähnliche Themen

  1. Synaptics: Offizielle Linux-Unterstützung nicht in Sicht

    Synaptics: Offizielle Linux-Unterstützung nicht in Sicht: Nachdem fast 1500 Personen eine Petition für bessere Linux-Treiber für die Touchpads von Synaptics unterschrieben haben, reagiert nun auch der...
  2. Synaptics Gesture Suite für Linux

    Synaptics Gesture Suite für Linux: Der Touchpad-Hersteller Synaptics hat seine Bibliothek »Synaptics Gesture Suite« auf Linux portiert. Weiterlesen...
  3. Synaptics Gesture Suite für Linux

    Synaptics Gesture Suite für Linux: Der Touchpad-Hersteller Synaptics hat seine Bibliothek »Synaptics Gesture Suite« auf Linux portiert. Weiterlesen...
  4. Abbruch der Installation bei Synaptics Touchpad

    Abbruch der Installation bei Synaptics Touchpad: Hallo, ich bin ein Umsteiger und wollte mir auf meinem Notebook 10.2 gönnen. Ich habe hier einige Threads zum Thema Synaptics gefunden, aber...
  5. HP 510 - Synaptics Touchpad funktioniert nicht

    HP 510 - Synaptics Touchpad funktioniert nicht: Hi zusammen :) Hab ebend eine Installation von openSUSE 10.2 auf einem HP 510 Notebook durchgeführt. Soweit funktioniert auch alles, bis auf...