Sony Eyetoy Cam unter Mandriva

Dieses Thema im Forum "Mandriva" wurde erstellt von mike1808, 28.06.2007.

  1. #1 mike1808, 28.06.2007
    mike1808

    mike1808 Mitglied

    Dabei seit:
    28.06.2007
    Beiträge:
    31
    Zustimmungen:
    0
    Hi Liebe Unixboardler *gg*

    Ich habe die Sony Eyetoy Cam und bin jetzt komplett von windoof umgestiegen auf linux. Unter Windoof konnte man die Eyetoy Cam installieren und als Webcam benutzen, jetzt wollte ich wissen ob das auch unter Mandriva bzw. Linux möglich ist?

    PS: Linux is doch das geilste was es gibt ;)

    MFG

    Michi
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Steck sie dochmal an und poste danach das syslog ....
     
  4. #3 mike1808, 28.06.2007
    Zuletzt bearbeitet: 28.06.2007
    mike1808

    mike1808 Mitglied

    Dabei seit:
    28.06.2007
    Beiträge:
    31
    Zustimmungen:
    0
    Wenn ich wüsste wie man das syslog aufruft könnte ich dir mehr sagen ;)

    Das einzige was es anzeigt wenn ich in der Konsole "lsusb" eingebe steht

    Bus 002 Device 005: ID 054c:0155 Sony Corp.

    Und das wird die Cam sein.

    mfg
     
  5. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
  6. #5 mike1808, 30.06.2007
    mike1808

    mike1808 Mitglied

    Dabei seit:
    28.06.2007
    Beiträge:
    31
    Zustimmungen:
    0
    ja da kommt das

    Linux version 2.6.17-13mdv (rtp@octopus.mandriva.com) (gcc version 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP Fri Mar 23 19:03:31 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    895MB LOWMEM available.
    found SMP MP-table at 000f53a0
    On node 0 totalpages: 262128
    DMA zone: 4096 pages, LIFO batch:0
    Normal zone: 225279 pages, LIFO batch:31
    HighMem zone: 32753 pages, LIFO batch:7
    DMI 2.3 present.
    ACPI: RSDP (v000 Nvidia ) @ 0x000f9280
    ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
    ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
    ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff9680
    ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff95c0
    ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:15 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
    Built 1 zonelists
    Kernel command line: BOOT_IMAGE=linux root=/dev/hda1 resume=/dev/hda5 splash=silent vga=788
    bootsplash: silent mode.
    mapped APIC to ffffe000 (fee00000)
    mapped IOAPIC to ffffd000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2009.424 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1033672k/1048512k available (2430k kernel code, 13660k reserved, 760k data, 244k init, 131012k highmem, 0k BadRAM)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4023.02 BogoMIPS (lpj=8046041)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001
    CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 16k freed
    checking if image is initramfs... it is
    Freeing initrd memory: 733k freed
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
    Total of 1 processors activated (4023.02 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    Brought up 1 CPUs
    migration_cost=0
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    PCI: No mmconfig possible on 0:18
    Setting up standard PCI resources
    ACPI: Subsystem revision 20060127
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:09.0
    Boot video device is 0000:05:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 13 devices
    PnPBIOS: Disabled
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
    pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
    pnp: 00:01: ioport range 0x4400-0x447f has been reserved
    pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
    pnp: 00:01: ioport range 0x4800-0x487f has been reserved
    pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
    PCI: Bridge: 0000:00:09.0
    IO window: 9000-afff
    MEM window: fde00000-fdefffff
    PREFETCH window: fdf00000-fdffffff
    PCI: Bridge: 0000:00:0b.0
    IO window: 8000-8fff
    MEM window: fdd00000-fddfffff
    PREFETCH window: fdc00000-fdcfffff
    PCI: Bridge: 0000:00:0c.0
    IO window: 7000-7fff
    MEM window: fdb00000-fdbfffff
    PREFETCH window: fda00000-fdafffff
    PCI: Bridge: 0000:00:0d.0
    IO window: 6000-6fff
    MEM window: fd900000-fd9fffff
    PREFETCH window: fd800000-fd8fffff
    PCI: Bridge: 0000:00:0e.0
    IO window: 5000-5fff
    MEM window: f4000000-fbffffff
    PREFETCH window: d8000000-dfffffff
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1183197270.888:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0b.0:pcie00]
    Allocate Port Service[0000:00:0b.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0c.0:pcie00]
    Allocate Port Service[0000:00:0c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0d.0:pcie00]
    Allocate Port Service[0000:00:0d.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0e.0:pcie00]
    Allocate Port Service[0000:00:0e.0:pcie03]
    vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 3750k, total 131072k
    vesafb: mode is 800x600x16, linelength=1600, pages=2
    vesafb: protected mode interface info at c000:d2a0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 197324 bytes,<6>...found (800x600, 197276 bytes, v3).
    Console: switching to colour frame buffer device 93x31
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
    NFORCE-CK804: chipset revision 242
    NFORCE-CK804: not 100% native mode: will probe irqs later
    NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hda: ST3250820A, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: GENERIC CRD-BPDV2AV, ATAPI CD/DVD-ROM drive
    hdd: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 512KiB
    hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
    hda: cache flushes supported
    hda: hda1 hda2 < hda5 hda6 >
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 controller doesn't have AUX irq; using default 12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    NET: Registered protocol family 1
    Using IPI No-Shortcut mode
    ACPI wakeup devices:
    HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
    ACPI: (supports S0 S3 S4 S5)
    BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    Freeing unused kernel memory: 244k freed
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    input: AT Translated Set 2 keyboard as /class/input/input0
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 10 ports detected
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    ieee1394: Initialized config rom entry `ip1394'
    ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 18
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    ndiswrapper version 1.21 loaded (preempt=no,smp=yes)
    usb 2-2: new high speed USB device using ehci_hcd and address 3
    usb 2-2: configuration #1 chosen from 1 choice
    hub 2-2:1.0: USB hub found
    hub 2-2:1.0: 4 ports detected
    ohci_hcd 0000:00:02.0: wakeup
    usb 2-1: reset high speed USB device using ehci_hcd and address 2
    ndiswrapper: driver netwg121 (NETGEAR, Inc.,11/13/2003, 1.0.5.1000) loaded
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00007c482f]
    usb 2-2.1: new full speed USB device using ehci_hcd and address 5
    usb 2-2.1: configuration #1 chosen from 1 choice
    usb 1-8: new low speed USB device using ohci_hcd and address 2
    usb 1-8: configuration #1 chosen from 1 choice
    Linux agpgart interface v0.101 (c) Dave Jones
    powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
    powernow-k8: BIOS error - no PSB or ACPI _PSS objects
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    wlan0: vendor: 'NETGEAR WG121 802.11g Wireless USB2.0 Adapter'
    wlan0: ndiswrapper ethernet device 00:09:5b:5d:7a:7a using driver netwg121, 0846:4200.F.conf
    wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
    usbcore: registered new driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-8
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    usbcore: registered new driver ndiswrapper
    usbcore: registered new driver usbmouse
    drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
    SCSI subsystem initialized
    libata version 1.20 loaded.
    sata_nv 0000:00:07.0: version 0.8
    ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:07.0 to 64
    ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 19
    ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 19
    ts: Compaq touchscreen protocol output
    ata1: SATA link down (SStatus 0)
    scsi0 : sata_nv
    ata2: SATA link down (SStatus 0)
    scsi1 : sata_nv
    ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 20
    ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 20
    ata3: SATA link down (SStatus 0)
    scsi2 : sata_nv
    ata4: SATA link down (SStatus 0)
    scsi3 : sata_nv
    sata_sil 0000:01:0d.0: version 0.9
    ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21
    sata_sil 0000:01:0d.0: Applying R_ERR on DMA activate FIS errata fix
    ata5: SATA max UDMA/100 cmd 0xF8EE2080 ctl 0xF8EE208A bmdma 0xF8EE2000 irq 21
    ata6: SATA max UDMA/100 cmd 0xF8EE20C0 ctl 0xF8EE20CA bmdma 0xF8EE2008 irq 21
    ata7: SATA max UDMA/100 cmd 0xF8EE2280 ctl 0xF8EE228A bmdma 0xF8EE2200 irq 21
    ata8: SATA max UDMA/100 cmd 0xF8EE22C0 ctl 0xF8EE22CA bmdma 0xF8EE2208 irq 21
    ata5: SATA link down (SStatus 0)
    scsi4 : sata_sil
    ata6: SATA link down (SStatus 0)
    scsi5 : sata_sil
    ata7: SATA link down (SStatus 0)
    scsi6 : sata_sil
    ata8: SATA link down (SStatus 0)
    scsi7 : sata_sil
    device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
    EXT3 FS on hda1, internal journal
    Adding 4088500k swap on /dev/hda5. Priority:-1 extents:1 across:4088500k
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Supermount version 2.0.4 for kernel 2.6
    loop: loaded (max 8 devices, max 1 partitions per device)
    hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
    Netfilter messages via NETLINK v0.30.
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ip_conntrack version 2.4 (8191 buckets, 65528 max) - 224 bytes per conntrack
    ACPI: Fan [FAN] (on)
    Removing netfilter NETLINK layer.
    Using specific hotkey driver
    ACPI: Thermal Zone [THRM] (22 C)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    NET: Registered protocol family 17
    intel8x0_measure_ac97_clock: measured 54719 usecs
    intel8x0: clocking to 46902
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
    ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    forcedeth: using HIGHDMA
    usbcore: registered new driver snd-usb-audio
    eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
    eth0: no link during initialization.
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    sky2 v1.10-rtp addr 0xfdbfc000 irq 21 Yukon-EC (0xb6) rev 1
    sky2 eth1: addr 00:11:09:e9:be:03
    sky2 eth1: enabling interface
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    NFSD: starting 90-second grace period
    bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
    bootsplash: status on console 0 changed to on
    bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
    bootsplash: status on console 1 changed to on
    bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
    bootsplash: status on console 2 changed to on
    bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
    bootsplash: status on console 3 changed to on
    bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
    bootsplash: status on console 4 changed to on
    bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
    bootsplash: status on console 5 changed to on
    wlan0: no IPv6 routers present
    usb 2-2.1: USB disconnect, address 5
    usb 2-2.1: new full speed USB device using ehci_hcd and address 6
    usb 2-2.1: configuration #1 chosen from 1 choice


    sry konnte kein screenshot machen *gg*

    hoff du kannst mit dieser info was anfangen

    mfg
     
  7. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Hast du dir die Links oben angeschaut?
     
  8. #7 mike1808, 30.06.2007
    mike1808

    mike1808 Mitglied

    Dabei seit:
    28.06.2007
    Beiträge:
    31
    Zustimmungen:
    0
    Nö *gg*

    mach ich aber jetzt gerade!
     
  9. devilz

    devilz Pro*phet
    Administrator

    Dabei seit:
    01.05.2002
    Beiträge:
    12.244
    Zustimmungen:
    0
    Ort:
    Hessen
    Gut ;)
     
  10. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  11. #9 mike1808, 30.06.2007
    mike1808

    mike1808 Mitglied

    Dabei seit:
    28.06.2007
    Beiträge:
    31
    Zustimmungen:
    0
    Tja ich hab mir die Links angeschaut und naja ich kenn mich nüsse damit aus *gg* ich glaub ich lass es lieber und spiel mich damit wenn ich mehr zeit habe *gg*

    trotzdem danke für deine hilfe und dein bemühen!!

    mfg
     
  12. #10 mike1808, 02.07.2007
    mike1808

    mike1808 Mitglied

    Dabei seit:
    28.06.2007
    Beiträge:
    31
    Zustimmungen:
    0
    Hi Leute

    Wollte jetzt die Cam installieren nur beim make hab ich folgende fehlermeldung

    make -C /lib/modules/2.6.17-14mdv/build M=/home/michael/Download/ov51x-1.65-1.12 -mark modules
    make: *** /lib/modules/2.6.17-14mdv/build: Datei oder Verzeichnis nicht gefunden . Schluss.
    make: *** [all] Fehler 2


    was kann ich dagegen machen??

    mfg
     
Thema:

Sony Eyetoy Cam unter Mandriva

Die Seite wird geladen...

Sony Eyetoy Cam unter Mandriva - Ähnliche Themen

  1. Sony SmartWatch 2 mit höherer Auflösung und NFC

    Sony SmartWatch 2 mit höherer Auflösung und NFC: Sony hat auf der Mobile Asia Expo im chinesischen Shanghai eine aktualisierte Version der Android-basierten SmartWatch angekündigt. Der...
  2. Sonys Playstation 4 setzt auf Open Source

    Sonys Playstation 4 setzt auf Open Source: Die im Herbst auf den Markt kommende Spielekonsole Playstation 4 (PS4) setzt bei der Software auf das UNIX-Derivat FreeBSD. Weiterlesen...
  3. Firefox OS für Sony Xperia E

    Firefox OS für Sony Xperia E: Sony bietet Entwicklern die Möglichkeit, bereits jetzt ein experimentelles ROM von Firefox OS auf dem Xperia E Samrtphone zu installieren....
  4. Sony: Gerichtliche Auseinandersetzung um Linux-Abschaltung

    Sony: Gerichtliche Auseinandersetzung um Linux-Abschaltung: In seiner am Dienstag beim District Court in Nord-Kalifornien eingereichten Sammelklage wirft ein PlayStation 3-Nutzer Sony Computer Entertainment...
  5. Sony Digital Media Player NWZ-S544 spielt keine Videos

    Sony Digital Media Player NWZ-S544 spielt keine Videos: Hallo, ich würde gern mein Lieblingsvideo http://www.youtube.com/watch?v=y3l_f7NrY-I auf den o.g. Player...