smbshare an ip binden

Dieses Thema im Forum "Samba" wurde erstellt von DMM23, 31.05.2009.

  1. DMM23

    DMM23 Doppel-As

    Dabei seit:
    11.07.2007
    Beiträge:
    131
    Zustimmungen:
    0
    Ort:
    Hannover
    Mahlzeit,

    gibt es eine möglichkeit eine samba freigabe an eine IP zu binden, sodas nur dieser computer auf die freigabe zugreifen kann ?
    ich kenne nur den befehle hosts allow aber das ist glaube ich nur für [global] oder ?
    die freigabe soll desswegen an eine ip gebunden werde, weil ich bei smb nicht mit passwörtern arbeiten will.

    mfg

    ps.
    vllt könnte mir jemand schnell ne simple config verraten.
     
  2. Anzeige

    Schau dir mal diese Kategorie an. Dort findest du bestimmt etwas.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  3. Dizzy

    Dizzy Brain Damage

    Dabei seit:
    02.05.2007
    Beiträge:
    857
    Zustimmungen:
    0
    Ort:
    Graz
    Code:
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which 
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    #  - When such options are commented with ";", the proposed setting
    #    differs from the default Samba behaviour
    #  - When commented with "#", the proposed setting is the default
    #    behaviour of Samba but the option is considered important
    #    enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic 
    # errors. 
    # A well-established practice is to name the original file
    # "smb.conf.master" and create the "real" config file with
    # testparm -s smb.conf.master >smb.conf
    # This minimizes the size of the really used smb.conf file
    # which, according to the Samba Team, impacts performance
    # However, use this with caution if your smb.conf file contains nested
    # "include" statements. See Debian bug #483187 for a case
    # where using a master file is not a good idea.
    #
    
    #======================= Global Settings =======================
    
    [global]
    
    ## Browsing/Identification ###
    
    # Change this to the workgroup/NT-domain name your Samba server will part of
       workgroup = WORKGROUP
    
    # server string is the equivalent of the NT Description field
       server string = %h server
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    #   wins support = no
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # If we receive WINS server info from DHCP, override the options above. 
       include = /etc/samba/dhcp.conf
    
    # This will prevent nmbd to search for NetBIOS names through DNS.
       dns proxy = no
    
    # What naming service and in what order should we use to resolve host names
    # to IP addresses
    ;   name resolve order = lmhosts host wins bcast
    
    #### Networking ####
    
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
       interfaces = 192.168.1.0/8 eth0
    
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself.  However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
       bind interfaces only = yes
    
    
    
    #### Debugging/Accounting ####
    
    # This tells Samba to use a separate log file for each machine
    # that connects
       log file = /var/log/samba/log.%m
    
    # Cap the size of the individual log files (in KiB).
       max log size = 1000
    
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    #   syslog only = no
    
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
       syslog = 0
    
    # Do something sensible when Samba crashes: mail the admin a backtrace
       panic action = /usr/share/samba/panic-action %d
    
    
    ####### Authentication #######
    
    # "security = user" is always a good idea. This will require a Unix account
    # in this server for every user accessing the server. See
    # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
    # in the samba-doc package for details.
       security = user
    
    # You may wish to use password encryption.  See the section on
    # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
       encrypt passwords = true
    
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
       passdb backend = tdbsam
    
       obey pam restrictions = yes
    
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
       unix password sync = yes
    
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
       passwd program = /usr/bin/passwd %u
       passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
       pam password change = yes
    
    ########## Domains ###########
    
    # Is this machine able to authenticate users. Both PDC and BDC
    # must have this setting enabled. If you are the BDC you must
    # change the 'domain master' setting to no
    #
    ;   domain logons = yes
    #
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of the user's profile directory
    # from the client point of view)
    # The following required a [profiles] share to be setup on the
    # samba server (see below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    #   logon path = \\%N\%U\profile
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    #   logon home = \\%N\%U
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
    
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe.  The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
    
    # This allows machine accounts to be created on the domain controller via the 
    # SAMR RPC pipe.  
    # The following assumes a "machines" group exists on the system
    ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
    
    # This allows Unix groups to be created on the domain controller via the SAMR
    # RPC pipe.  
    ; add group script = /usr/sbin/addgroup --force-badname %g
    
    ########## Printing ##########
    
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
       load printers = yes
    
    # lpr(ng) printing. You may wish to override the location of the
    # printcap file
    ;   printing = bsd
    ;   printcap name = /etc/printcap
    
    # CUPS printing.  See also the cupsaddsmb(8) manpage in the
    # cupsys-client package.
       printing = cups
       printcap name = cups
    
    ############ Misc ############
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
    
    # Most people will find that this option gives better performance.
    # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
    # for details
    # You may want to add the following on a Linux system:
    #         SO_RCVBUF=8192 SO_SNDBUF=8192
    #   socket options = TCP_NODELAY
    
    # The following parameter is useful only if you have the linpopup package
    # installed. The samba maintainer and the linpopup maintainer are
    # working to ease installation and configuration of linpopup and samba.
    ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
    
    # Domain Master specifies Samba to be the Domain Master Browser. If this
    # machine will be configured as a BDC (a secondary logon server), you
    # must set this to 'no'; otherwise, the default behavior is recommended.
    #   domain master = auto
    
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    
    # The following was the default behaviour in sarge,
    # but samba upstream reverted the default because it might induce
    # performance issues in large organizations.
    # See Debian bug #368251 for some of the consequences of *not*
    # having this setting and smb.conf(5) for details.
    ;   winbind enum groups = yes
    ;   winbind enum users = yes
    
    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.
    
    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ;   usershare max shares = 100
    
    #======================= Share Definitions =======================
    
    [homes]
       comment = Home Directories
       browseable = yes
    
    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
       read only = no
    
    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
       create mask = 0700
    
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
       directory mask = 0700
    
    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.
    # The following parameter makes sure that only "username" can connect
    # to \\server\username
    # This might need tweaking when using external authentication schemes
       valid users = %S
    
    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   read only = yes
    ;   share modes = no
    
    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700
    
    [printers]
       comment = All Printers
       browseable = no
       path = /var/spool/samba
       printable = yes
       guest ok = no
       read only = yes
       create mask = 0700
    
    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
       comment = Printer Drivers
       path = /var/lib/samba/printers
       browseable = yes
       read only = yes
       guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # You may need to replace 'lpadmin' with the name of the group your
    # admin users are members of.
    # Please note that you also need to set appropriate Unix permissions
    # to the drivers directory for these users to have write rights in it
    ;   write list = root, @lpadmin
    
    # A sample share for sharing your CD-ROM with others.
    ;[cdrom]
    ;   comment = Samba server's CD-ROM
    ;   read only = yes
    ;   locking = no
    ;   path = /cdrom
    ;   guest ok = yes
    
    # The next two parameters show how to auto-mount a CD-ROM when the
    #	cdrom share is accesed. For this to work /etc/fstab must contain
    #	an entry like this:
    #
    #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
    #
    # The CD-ROM gets unmounted automatically after the connection to the
    #
    # If you don't want to use auto-mounting/unmounting make sure the CD
    #	is mounted on /cdrom
    #
    ;   preexec = /bin/mount /cdrom
    ;   postexec = /bin/umount /cdrom
    Das interfaces kannst du afaik auch auf einzelne shares anwenden.
     
  4. DMM23

    DMM23 Doppel-As

    Dabei seit:
    11.07.2007
    Beiträge:
    131
    Zustimmungen:
    0
    Ort:
    Hannover
    danke dir, damit habe icha uch schon rumgedoktert aber irgendwie schien es nicht zu klappen.

    wofür eth0 steht kann ich mir denken, aber wofür steht die /8?
     
  5. Gast1

    Gast1 Guest

    Befrage die Suchmaschine Deines geringsten Misstrauens nach "Netzwerkmaske" oder "Netzmaske" oder "Subnetzmaske".
     
  6. DMM23

    DMM23 Doppel-As

    Dabei seit:
    11.07.2007
    Beiträge:
    131
    Zustimmungen:
    0
    Ort:
    Hannover
    ach kuwl danke. ich wusste nicht das es für die netzmaske auch solche kürzel gibt.
     
  7. Gast1

    Gast1 Guest

    Dann weisst Du jetzt auch, warum dieser Eintrag

    Code:
    interfaces = 192.168.1.0/8 
    zu > 99% meilenweit übers Ziel hinausgeschossen ist.

    :-)
     
  8. DMM23

    DMM23 Doppel-As

    Dabei seit:
    11.07.2007
    Beiträge:
    131
    Zustimmungen:
    0
    Ort:
    Hannover
    damit es sinn macht müsste ich als /24 wählen richtig ?
     
  9. Gast1

    Gast1 Guest

  10. DMM23

    DMM23 Doppel-As

    Dabei seit:
    11.07.2007
    Beiträge:
    131
    Zustimmungen:
    0
    Ort:
    Hannover
    also habe ich es richtig verstanden.
    aber wo wir gerade beim thema sind die ersten 6 stellen sind meist/immer provider abhängig oder ?
     
  11. Anzeige

    Vielleicht findest du HIER Antworten.
    Registrieren bzw. einloggen, um diese und auch andere Anzeigen zu deaktivieren
  12. Gast1

    Gast1 Guest

    ?

    Bei privaten Netzbereichen sicher nicht.

    Bei öffentlichen IPs auch nicht zwingend, hängt von der Grösse des Providers ab, kann man ja ganz einfach abzählen.
     
  13. #11 DMM23, 31.05.2009
    Zuletzt bearbeitet: 31.05.2009
    DMM23

    DMM23 Doppel-As

    Dabei seit:
    11.07.2007
    Beiträge:
    131
    Zustimmungen:
    0
    Ort:
    Hannover
    So sieht die config aus

    ich kann auf test nur mit passwort und nutzername zugreifen ?
    was muss ich hier verändern ?
    wenn ich nun guest ok = yes einfüge dann macht interfacing kein sinn mehr.

    *edit* habe das problem gelöst und nehme einfach hosts allow und hosts deny. sollte nun noch jemand wissen wie ich die share auch nur für die sichtbar machen kann die drauf zugreifen können und der rest unsichtbar ist, lasst es mich wissen.
    danke soweit für eure hilfe.
     
Thema:

smbshare an ip binden

Die Seite wird geladen...

smbshare an ip binden - Ähnliche Themen

  1. Smbshare lässt sich nicht mounten

    Smbshare lässt sich nicht mounten: Ich bin grad dran mein Barebone einzurichten hab da nun WinXP drauf. Hab dann auch alles brav upgrdatet nun will ich auf die SMBshares zugreifen....
  2. smbshare mounten per fstab, komisches verhalten

    smbshare mounten per fstab, komisches verhalten: Tach zusammen. Hier mein Problem: Ich will nen SMBshare per fstab mounten. Man sollte denken, dass dies eigentlich nicht so schwer ist. Also...
  3. Arch Linux via Hamachi zu bestehendem VPN verbinden

    Arch Linux via Hamachi zu bestehendem VPN verbinden: Guten Tag zusammen! Ich betreibe zu Hause einen kleinen Server für Minecraft und samba file sharing und möchte diesen nun zu meinem bestehenden...
  4. Kontextmenü mit einem Skript verbinden

    Kontextmenü mit einem Skript verbinden: Abend, wenn ich z. B. eine simple Umwandlung eines Bildformates in ein anderes über das KDE-Kontextmenü (Servicemenü nennt es sich im KDE oder...
  5. Kurztipp: Livestatus-Modul in Nagios einbinden

    Kurztipp: Livestatus-Modul in Nagios einbinden: Mit dem Livestatus-Modul lässt sich das Netzwerküberwachungssystem Nagios mit alternativen Frontends und anderer Software koppeln. Dieser Tipp...