PCMCIA Wlan Sinus111card on Debian Etch

A

abinmuell

Grünschnabel
Hi zusammen,

ich habe auf meinem Notebook (HP Omnibook xt1500) Debian Etch installiert.

Soweit so GENIAL einfach...

Leider habe ich >1 Probleme... ;-)

Ich suche schon seit einer Woche nach der Vorgehensweise eine T Sinus111card im PCMCIA Slot laufen zu bekommen. Leider hab ich nicht viel anwendbares gefunden. Nachfolgend noch ein paar Informationen über das System:

Code:
# uname -a
Linux nb-100 2.6.18-5-686 #1 SMP Sun Aug 12 21:57:02 UTC 2007 i686 GNU/Linux

# cat /var/log/messages | grep "pcmcia"
Sep  1 19:36:45 nb-100 kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
Sep  1 19:36:45 nb-100 kernel: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
Sep  1 19:36:45 nb-100 kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
Sep  1 19:36:45 nb-100 kernel: pcmcia: registering new device pcmcia0.0
Sep  1 19:36:45 nb-100 kernel: pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
Sep  1 19:36:45 nb-100 kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Sep  1 19:36:45 nb-100 kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
Sep  1 22:09:13 nb-100 kernel: pcmcia: registering new device pcmcia0.0

# /sbin/cardctl ident
Socket 0:
  product info: "T-Sinus", "111card", "", "2.0.0"
  manfid: 0x01bf, 0x3301
  function: 6 (network)

Mein Problem mit der ATI Mobility RadeOn 7500 C poste ich extra...

Danke für Eure Hilfe

Jörg
 
Bist Du sicher, daß Du Google bemüht hast?...
Was für Tutorials etc. hast Du denn schon ausprobiert? ...

Das hier (link) ist bei mir der 3. Treffer von oben...
 
Zuletzt bearbeitet:
Die Seite ist nicht zu erreichen ...

aber ich habe wirklich einige Lösungen probiert - entweder wusste ich den richtigen Chipsatz nicht oder konnte Pakete nicht finden...

Sonst noch Hinweise?

Jörg
 
Jo, der Linux-Club ist zur Zeit down.

Einfach ein wenig warten und in der Zwischenzeit mal genauere Angaben zur Hardware posten, z.B. die vollständige Ausgabe von lspci -vv für das Ding.

Hat Deine Distribution das Tool hwinfo schon installiert?

Falls nicht, nachinstallieren und mal mit den Schaltern --netcard, --wlan, --pcmcia und/oder --pcmcia-ctrl aufrufen.

Und die versuchten Tutorial könnte man auch mal verlinken am besten mit einer kurzen Bemerkung, wo es wie geklemmt hat.

Greetz,

RM
 
hi,

hab' die Anleitunetsg auf Linux-CLub versucht.

Wie dort angegeben suchte ich die modules.conf... gibts bei meinem Debian nicht.

Ausserdem hab ich kein Verzeichnis /etc/sysconfig/network....

hier noch die Ausgabe von lspci -vv
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
	Subsystem: Intel Corporation Unknown device 1958
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] Vendor Specific Information
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1

00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: e8100000-e81fffff
	Prefetchable memory behind bridge: f0000000-f7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation vpr Matrix 170B4
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1860 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation vpr Matrix 170B4
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 9
	Region 4: I/O ports at 18c0 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation vpr Matrix 170B4
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 9
	Region 4: I/O ports at 1800 [size=32]

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: e8200000-e82fffff
	Prefetchable memory behind bridge: 20000000-21ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Intel Corporation vpr Matrix 170B4
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at <unassigned>
	Region 1: I/O ports at <unassigned>
	Region 2: I/O ports at <unassigned>
	Region 3: I/O ports at <unassigned>
	Region 4: I/O ports at 1820 [size=16]
	Region 5: Memory at 22000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
	Subsystem: Intel Corporation vpr Matrix 170B4
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 10
	Region 4: I/O ports at 1840 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
	Subsystem: Hewlett-Packard Company Unknown device 0020
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 10
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 1880 [size=64]

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA])
	Subsystem: Hewlett-Packard Company Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 2000 [size=256]
	Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at e8120000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
	Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8200000 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at ff00 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
	Subsystem: Hewlett-Packard Company Unknown device 0020
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 3400 [size=256]
	Region 1: Memory at e8200800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.0 Communication controller: ESS Technology ES2838/2839 SuperLink Modem (rev 01)
	Subsystem: Hewlett-Packard Company Unknown device 0020
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 3080 [disabled] [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
	Subsystem: Hewlett-Packard Company Unknown device 0023
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e8201000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: 20000000-21fff000 (prefetchable)
	Memory window 1: 24000000-25fff000
	I/O window 0: 00003800-000038ff
	I/O window 1: 00003c00-00003cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

...

Grüße, Jörg

P.S. hwinfo hab ich installiert
 

Ähnliche Themen

Rollei Mini Wifi Camcorder

Modulfehler?

Ubuntu X / dbus problem

Festplatte friert ein nach suspend/resume

XFCE freezes at startup

Zurück
Oben