K3b Will nicht...

[Mr_MeYa]

Ich habe Debian etch testing und ein Problem mit meinem k3b.
Jedes mal wenn ich brennen möchte (egal welcher Roling und welcher speed) gibt er dies aus:

System
-----------------------
K3b Version: 0.12.16

KDE Version: 3.5.3
QT Version:  3.3.6
Kernel:      2.6.16-2-486
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4040B A304 (/dev/hdc, ) at /media/cdrom1 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

TSSTcorp DVD-ROM TS-H352A TS01 (/dev/hdd, ) at /media/cdrom0 [CD-ROM; DVD-ROM; DVD+R; DVD+R DL] [DVD-ROM; DVD+R Double Layer; CD-ROM] [None]
Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.16-2-486
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/X11/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/X11/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/X11/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.
TOC Type: 0 = CD-DA
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision       : 'A304'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x0010 
Profile: 0x0009 (current)
Profile: 0x000A 
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 10769 kB/s 61x CD 7x DVD
FIFO size      : 4194304 = 4096 KB
/usr/bin/X11/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
pregap1: -1
Track 01: audio   61 MB (06:06.26) no preemp swab copy
Track 02: audio   69 MB (06:55.36) no preemp swab copy
Track 03: audio   32 MB (03:15.29) no preemp swab copy
Track 04: audio   24 MB (02:25.53) no preemp swab copy
Track 05: audio   15 MB (01:30.08) no preemp swab copy
Track 06: audio   40 MB (03:58.04) no preemp swab copy
Track 07: audio   12 MB (01:14.26) no preemp swab copy
Track 08: audio   36 MB (03:34.32) no preemp swab copy
Track 09: audio   68 MB (06:45.84) no preemp swab copy
Track 10: audio   56 MB (05:34.40) no preemp swab copy
Total size:      417 MB (41:19.40) = 185955 sectors
Lout start:      417 MB (41:21/30) = 185955 sectors

cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=24 -dao driveropts=burnfree -eject -useinfo -audio -shorttrack /tmp/kde-hero/k3b_audio_0_01.inf /tmp/kde-hero/k3b_audio_0_02.inf /tmp/kde-hero/k3b_audio_0_03.inf /tmp/kde-hero/k3b_audio_0_04.inf /tmp/kde-hero/k3b_audio_0_05.inf /tmp/kde-hero/k3b_audio_0_06.inf /tmp/kde-hero/k3b_audio_0_07.inf /tmp/kde-hero/k3b_audio_0_08.inf /tmp/kde-hero/k3b_audio_0_09.inf /tmp/kde-hero/k3b_audio_0_10.inf

Danke schonmal für die Hilfe

 

[Goodspeed]

Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?

Führ mal den Einrichtungsassistenten aus und lass mal die REchte auf 4711 setzen ... von cdrecord ...

 

[Mr_MeYa]

Stehen die nicht schon auf 4711?
Bild

Und wenn nein, wenn ich auf Apply drücke sagt er:

Could not update all Permissions.

 

[defcon]

-rwsr-xr-x 1 root cdrom 133 2006-01-07 19:43 /usr/bin/cdrecord
-rwsr-xr-x 1 root root 565104 2006-02-19 23:18 /usr/bin/cdrdao

chmod 4755

 

[Goodspeed]

Stehen die nicht schon auf 4711?

Nein, sie stehen auf 0755 ...

Dann mach es halt per Hand

chmod 4711 <cdrecord+pfad>

 

[Mr_MeYa]

Darkstar:/home/hero# chmod 4711 cdrecord /usr/bin/cdrecord
chmod: Zugriff auf „cdrecord“ nicht möglich: Datei oder Verzeichnis nicht gefunden


Ich verstehe nicht?!

 

[Goodspeed]

Das Teil heißt ja auch

/usr/bin/cdrecord.mmap

(siehe Screenshot)

also

chmod 4711 /usr/bin/cdrecord.mmap